@@ -222,13 +222,26 @@ static u32 acpi_display_type(struct intel_connector *connector)
return display_type;
}
+/*
+ * Ref: ACPI Spec 6.3
+ * https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
+ * Pages 1119 - 1123 describe, what I believe, a standard way of
+ * identifying / addressing "display panels" in the ACPI. It provides
+ * a way for the ACPI to define devices for the display panels attached
+ * to the system. It thus provides a way for the BIOS to export any panel
+ * specific properties to the system via ACPI (like device trees).
+ */
void intel_acpi_device_id_update(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = &dev_priv->drm;
struct intel_connector *connector;
struct drm_connector_list_iter conn_iter;
+ struct acpi_device *conn_dev, *parent;
+ u64 conn_addr;
u8 display_index[16] = {};
+ parent = ACPI_COMPANION(&dev->pdev->dev);
+
/* Populate the ACPI IDs for all connectors for a given drm_device */
drm_connector_list_iter_begin(dev, &conn_iter);
for_each_intel_connector_iter(connector, &conn_iter) {
@@ -242,6 +255,19 @@ void intel_acpi_device_id_update(struct drm_i915_private *dev_priv)
device_id |= display_index[type]++ << ACPI_DISPLAY_INDEX_SHIFT;
connector->acpi_device_id = device_id;
+
+ /* Build the _ADR to look for */
+ conn_addr = device_id | ACPI_DEVICE_ID_SCHEME |
+ ACPI_BIOS_CAN_DETECT;
+
+ drm_dbg_kms(dev, "%s: Looking for ACPI node at _ADR=%llX\n",
+ connector->base.kdev ?
+ dev_name(connector->base.kdev) : "NONAME",
+ conn_addr);
+
+ /* Look up the connector device, under the PCI device */
+ conn_dev = acpi_find_child_device(parent, conn_addr, false);
+ connector->acpi_handle = acpi_device_handle(conn_dev);
}
drm_connector_list_iter_end(&conn_iter);
}
@@ -411,9 +411,14 @@ struct intel_connector {
*/
struct intel_encoder *encoder;
+#ifdef CONFIG_ACPI
/* ACPI device id for ACPI and driver cooperation */
u32 acpi_device_id;
+ /* ACPI handle corresponding to this connector display, if found */
+ acpi_handle acpi_handle;
+#endif
+
/* Reads out the current hw, returning true if the connector is enabled
* and active (i.e. dpms ON state). */
bool (*get_hw_state)(struct intel_connector *);
@@ -44,6 +44,7 @@
#include "i915_debugfs.h"
#include "i915_drv.h"
#include "i915_trace.h"
+#include "intel_acpi.h"
#include "intel_atomic.h"
#include "intel_audio.h"
#include "intel_connector.h"
@@ -5864,6 +5865,7 @@ static int
intel_dp_connector_register(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
+ struct drm_i915_private *dev_priv = to_i915(connector->dev);
int ret;
ret = intel_connector_register(connector);
@@ -5872,6 +5874,18 @@ intel_dp_connector_register(struct drm_connector *connector)
intel_connector_debugfs_add(connector);
+ /*
+ * Lookup the ACPI node corresponding to the connector. This needs
+ * to be done in ->late_register() hook since it needs to iterate
+ * over all the connectors after they are registered. Calling it
+ * once for the device is enough since a single call will update
+ * for all connectors.
+ */
+ if (!dev_priv->acpi_scan_done) {
+ intel_acpi_device_id_update(dev_priv);
+ dev_priv->acpi_scan_done = true;
+ }
+
DRM_DEBUG_KMS("registering %s bus for %s\n",
intel_dp->aux.name, connector->kdev->kobj.name);
@@ -1189,6 +1189,8 @@ struct drm_i915_private {
bool ipc_enabled;
+ bool acpi_scan_done;
+
/* Used to save the pipe-to-encoder mapping for audio */
struct intel_encoder *av_enc_map[I915_MAX_PIPES];
Lookup and attach ACPI nodes for intel connectors. The lookup is done in compliance with ACPI Spec 6.3 https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf (Ref: Pages 1119 - 1123). This can be useful for any connector specific platform properties. (This will be used for privacy screen in next patch). Signed-off-by: Rajat Jain <rajatja@google.com> --- v9: same as v8 v8: Also print the connector name in debug message. v7: Look for ACPI node in ->late_register() hook. Do the scan only once per drm_device (instead of 1 per drm_connector) v6: Addressed minor comments from Jani at https://lkml.org/lkml/2020/1/24/1143 - local variable renamed. - used drm_dbg_kms() - used acpi_device_handle() - Used opaque type acpi_handle instead of void* v5: same as v4 v4: Same as v3 v3: fold the code into existing acpi_device_id_update() function v2: formed by splitting the original patch into ACPI lookup, and privacy screen property. Also move it into i915 now that I found existing code in i915 that can be re-used. drivers/gpu/drm/i915/display/intel_acpi.c | 26 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 5 ++++ drivers/gpu/drm/i915/display/intel_dp.c | 14 ++++++++++ drivers/gpu/drm/i915/i915_drv.h | 2 ++ 4 files changed, 47 insertions(+)