@@ -18,6 +18,12 @@ struct intel_crtc_state;
struct intel_bw_state {
struct intel_global_state base;
+ /*
+ * Contains a bit mask, used to determine, whether correspondent
+ * pipe allows SAGV or not.
+ */
+ u8 pipe_sagv_reject;
+
unsigned int data_rate[I915_MAX_PIPES];
u8 num_active_planes[I915_MAX_PIPES];
};
@@ -14009,7 +14009,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
/* Watermarks */
for (level = 0; level <= max_level; level++) {
if (skl_wm_level_equals(&hw_plane_wm->wm[level],
- &sw_plane_wm->wm[level]))
+ &sw_plane_wm->wm[level]) ||
+ (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
+ &sw_plane_wm->sagv_wm0)))
continue;
drm_err(&dev_priv->drm,
@@ -14064,7 +14066,9 @@ static void verify_wm_state(struct intel_crtc *crtc,
/* Watermarks */
for (level = 0; level <= max_level; level++) {
if (skl_wm_level_equals(&hw_plane_wm->wm[level],
- &sw_plane_wm->wm[level]))
+ &sw_plane_wm->wm[level]) ||
+ (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
+ &sw_plane_wm->sagv_wm0)))
continue;
drm_err(&dev_priv->drm,
@@ -15535,6 +15539,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
crtc->config = new_crtc_state;
if (state->modeset) {
+ struct intel_bw_state *bw_state;
+
+ bw_state = intel_atomic_get_bw_new_state(state);
+
drm_atomic_helper_update_legacy_modeset_state(dev, &state->base);
intel_set_cdclk_pre_plane_update(state);
@@ -15543,8 +15551,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
* SKL workaround: bspec recommends we disable the SAGV when we
* have more then one pipe enabled
*/
- if (!intel_can_enable_sagv(state))
- intel_disable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11) {
+ if (!intel_can_enable_sagv(bw_state))
+ intel_disable_sagv(dev_priv);
+ }
intel_modeset_verify_disabled(dev_priv, state);
}
@@ -15644,8 +15654,15 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
if (state->modeset)
intel_verify_planes(state);
- if (state->modeset && intel_can_enable_sagv(state))
- intel_enable_sagv(dev_priv);
+ if (INTEL_GEN(dev_priv) < 11) {
+ struct intel_bw_state *bw_state;
+
+ bw_state = intel_atomic_get_bw_new_state(state);
+
+ if (state->modeset && intel_can_enable_sagv(bw_state)) {
+ intel_enable_sagv(dev_priv);
+ }
+ }
drm_atomic_helper_commit_hw_done(&state->base);
@@ -15797,7 +15814,6 @@ static int intel_atomic_commit(struct drm_device *dev,
if (state->global_state_changed) {
assert_global_state_locked(dev_priv);
-
dev_priv->active_pipes = state->active_pipes;
}
@@ -679,6 +679,8 @@ struct skl_plane_wm {
struct skl_wm_level wm[8];
struct skl_wm_level uv_wm[8];
struct skl_wm_level trans_wm;
+ struct skl_wm_level sagv_wm0;
+ struct skl_wm_level uv_sagv_wm0;
bool is_planar;
};
@@ -689,6 +691,7 @@ enum color_plane {
struct skl_pipe_wm {
struct skl_plane_wm planes[I915_MAX_PLANES];
+ bool can_sagv;
};
enum vlv_wm_level {
@@ -43,6 +43,7 @@
#include "i915_fixed.h"
#include "i915_irq.h"
#include "i915_trace.h"
+#include "display/intel_bw.h"
#include "intel_pm.h"
#include "intel_sideband.h"
#include "../../../platform/x86/intel_ips.h"
@@ -3634,7 +3635,7 @@ static bool skl_needs_memory_bw_wa(struct drm_i915_private *dev_priv)
return IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv);
}
-static bool
+bool
intel_has_sagv(struct drm_i915_private *dev_priv)
{
/* HACK! */
@@ -3827,33 +3828,106 @@ static bool skl_can_enable_sagv_on_pipe(struct intel_crtc_state *crtc_state)
return icl_can_enable_sagv_on_pipe(crtc_state);
}
-bool intel_can_enable_sagv(struct intel_atomic_state *state)
+static bool
+tgl_can_enable_sagv_on_pipe(struct intel_crtc_state *crtc_state);
+
+bool intel_can_enable_sagv(struct intel_bw_state *bw_state)
+{
+ return bw_state->pipe_sagv_reject == 0;
+}
+
+static int intel_compute_sagv_mask(struct intel_atomic_state *state)
{
+ int ret;
struct drm_device *dev = state->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc;
- struct intel_crtc_state *crtc_state;
+ struct intel_crtc_state *new_crtc_state;
+ struct intel_bw_state *new_bw_state = NULL;
+ struct intel_bw_state *old_bw_state = NULL;
int i;
+ bool can_sagv;
+ /*
+ * If SAGV is not supported we just can't do anything
+ * not even set or reject SAGV points - just bail out.
+ * Thus avoid needless calculations.
+ */
if (!intel_has_sagv(dev_priv))
- return false;
+ return 0;
+
+ for_each_new_intel_crtc_in_state(state, crtc,
+ new_crtc_state, i) {
+ bool pipe_sagv_enable;
+
+ new_bw_state = intel_atomic_get_bw_state(state);
+ if (IS_ERR(new_bw_state)) {
+ WARN(1, "Could not get bw_state\n");
+ return PTR_ERR(new_bw_state);
+ }
+
+ old_bw_state = intel_atomic_get_bw_old_state(state);
+
+ if (!new_crtc_state->hw.active)
+ continue;
+
+ if (INTEL_GEN(dev_priv) >= 12) {
+ pipe_sagv_enable = tgl_can_enable_sagv_on_pipe(new_crtc_state);
+ } else if (INTEL_GEN(dev_priv) >= 11) {
+ pipe_sagv_enable = icl_can_enable_sagv_on_pipe(new_crtc_state);
+ } else {
+ pipe_sagv_enable = skl_can_enable_sagv_on_pipe(new_crtc_state);
+ }
+
+ if (pipe_sagv_enable)
+ new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe);
+ else
+ new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe);
+ }
+
+ if (!new_bw_state || !old_bw_state)
+ return 0;
+
+ can_sagv = new_bw_state->pipe_sagv_reject == 0;
+
+ for_each_new_intel_crtc_in_state(state, crtc,
+ new_crtc_state, i) {
+ struct skl_pipe_wm *pipe_wm = &new_crtc_state->wm.skl.optimal;
+
+ /*
+ * Due to drm limitation at commit state, when
+ * changes are written the whole atomic state is
+ * zeroed away => which prevents from using it,
+ * so just sticking it into pipe wm state for
+ * keeping it simple - anyway this is related to wm.
+ * Proper way in ideal universe would be of course not
+ * to lose parent atomic state object from child crtc_state,
+ * and stick to OOP programming principles, which had been
+ * scientifically proven to work.
+ */
+ pipe_wm->can_sagv = can_sagv;
+ }
/*
- * If there are no active CRTCs, no additional checks need be performed
+ * For SAGV we need to account all the pipes,
+ * not only the ones which are in state currently.
+ * Grab all locks if we detect that we are actually
+ * going to do something.
*/
- if (hweight8(state->active_pipes) == 0)
- return true;
+ if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) {
+ DRM_DEBUG_KMS("State %p: old sagv mask 0x%x, new sagv mask 0x%x\n",
+ state,
+ old_bw_state->pipe_sagv_reject,
+ new_bw_state->pipe_sagv_reject);
- for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
- if (INTEL_GEN(dev_priv) <= 9) {
- if (!skl_can_enable_sagv_on_pipe(crtc_state))
- return false;
- } else if (!icl_can_enable_sagv_on_pipe(crtc_state)) {
- return false;
+ ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+ if (ret) {
+ DRM_DEBUG_KMS("Could not serialize global state\n");
+ return ret;
}
}
- return true;
+ return 0;
}
/*
@@ -4075,6 +4149,7 @@ skl_cursor_allocation(const struct intel_crtc_state *crtc_state,
unsigned int latency = dev_priv->wm.skl_latency[level];
skl_compute_plane_wm(crtc_state, level, latency, &wp, &wm, &wm);
+
if (wm.min_ddb_alloc == U16_MAX)
break;
@@ -4589,9 +4664,66 @@ skl_plane_wm_level(const struct intel_crtc_state *crtc_state,
const struct skl_plane_wm *wm =
&crtc_state->wm.skl.optimal.planes[plane_id];
+ if (!level) {
+ const struct skl_pipe_wm *pipe_wm = &crtc_state->wm.skl.optimal;
+
+ if (pipe_wm->can_sagv)
+ return color_plane == COLOR_PLANE_Y ? &wm->sagv_wm0 : &wm->uv_sagv_wm0;
+ }
+
return color_plane == COLOR_PLANE_Y ? &wm->wm[level] : &wm->uv_wm[level];
}
+static bool
+tgl_can_enable_sagv_on_pipe(struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ enum plane_id plane_id;
+
+ /*
+ * If pipe is not active it can't affect SAGV rejection
+ * Checking it here is needed to leave only cases when
+ * alloc_size is 0 for any other reasons, except inactive
+ * pipe. As inactive pipe is fine, however having no ddb
+ * space available is already problematic - so need to
+ * to separate those.
+ */
+ if (!crtc_state->hw.active)
+ return true;
+
+ /*
+ * skl_allocate_pipe_ddb already done it's job to allocate
+ * as much blocks as possible for each plane - let's now
+ * evaluate if those were enough to enable SAGV.
+ * Criteria is that we need to have wm0 + sagv_block_time blocks
+ * for level 0 for each plane.
+ */
+ for_each_plane_id_on_crtc(intel_crtc, plane_id) {
+ struct skl_ddb_entry *plane_alloc =
+ &crtc_state->wm.skl.plane_ddb_y[plane_id];
+ struct skl_ddb_entry *uv_plane_alloc =
+ &crtc_state->wm.skl.plane_ddb_uv[plane_id];
+ const struct skl_plane_wm *wm =
+ &crtc_state->wm.skl.optimal.planes[plane_id];
+
+ if (skl_ddb_entry_size(plane_alloc) < wm->sagv_wm0.min_ddb_alloc) {
+ DRM_DEBUG_KMS("Not enough ddb blocks(%d-%d) for SAGV plane %d pipe %c\n",
+ plane_alloc->start, plane_alloc->end, plane_id,
+ pipe_name(intel_crtc->pipe));
+ return false;
+ }
+
+ if (skl_ddb_entry_size(uv_plane_alloc) < wm->uv_sagv_wm0.min_ddb_alloc) {
+ DRM_DEBUG_KMS("Not enough ddb blocks(%d-%d) for SAGV uv plane %d pipe %c\n",
+ plane_alloc->start, plane_alloc->end, plane_id,
+ pipe_name(intel_crtc->pipe));
+ return false;
+ }
+ }
+
+ return true;
+}
+
static int
skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state)
{
@@ -5173,10 +5305,17 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
static void
skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
const struct skl_wm_params *wm_params,
- struct skl_wm_level *levels)
+ struct skl_plane_wm *plane_wm,
+ enum color_plane color_plane)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
int level, max_level = ilk_wm_max_level(dev_priv);
+ /*
+ * Check which kind of plane is it and based on that calculate
+ * correspondent WM levels.
+ */
+ struct skl_wm_level *levels = color_plane == COLOR_PLANE_UV ?
+ plane_wm->uv_wm : plane_wm->wm;
struct skl_wm_level *result_prev = &levels[0];
for (level = 0; level <= max_level; level++) {
@@ -5190,6 +5329,40 @@ skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
}
}
+static void skl_compute_sagv_wm(const struct intel_crtc_state *crtc_state,
+ const struct skl_wm_params *wm_params,
+ struct skl_plane_wm *plane_wm,
+ enum color_plane color_plane)
+{
+ struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
+ struct skl_wm_level *sagv_wm = color_plane == COLOR_PLANE_UV ?
+ &plane_wm->uv_sagv_wm0 : &plane_wm->sagv_wm0;
+ struct skl_wm_level *levels = color_plane == COLOR_PLANE_UV ?
+ plane_wm->uv_wm : plane_wm->wm;
+
+ /*
+ * For Gen12 if it is an L0 we need to also
+ * consider sagv_block_time when calculating
+ * L0 watermark - we will need that when making
+ * a decision whether enable SAGV or not.
+ * For older gens we agreed to copy L0 value for
+ * compatibility.
+ */
+ if ((INTEL_GEN(dev_priv) >= 12)) {
+ u32 latency = dev_priv->wm.skl_latency[0];
+
+ latency += dev_priv->sagv_block_time_us;
+ skl_compute_plane_wm(crtc_state, 0, latency,
+ wm_params, &levels[0],
+ sagv_wm);
+ DRM_DEBUG_KMS("%d L0 blocks required for SAGV vs %d for non-SAGV\n",
+ sagv_wm->min_ddb_alloc, levels[0].min_ddb_alloc);
+ } else {
+ /* Since all members are POD */
+ *sagv_wm = levels[0];
+ }
+}
+
static void skl_compute_transition_wm(const struct intel_crtc_state *crtc_state,
const struct skl_wm_params *wp,
struct skl_plane_wm *wm)
@@ -5270,7 +5443,8 @@ static int skl_build_plane_wm_single(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
- skl_compute_wm_levels(crtc_state, &wm_params, wm->wm);
+ skl_compute_wm_levels(crtc_state, &wm_params, wm, COLOR_PLANE_Y);
+ skl_compute_sagv_wm(crtc_state, &wm_params, wm, COLOR_PLANE_Y);
skl_compute_transition_wm(crtc_state, &wm_params, wm);
return 0;
@@ -5292,7 +5466,8 @@ static int skl_build_plane_wm_uv(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
- skl_compute_wm_levels(crtc_state, &wm_params, wm->uv_wm);
+ skl_compute_wm_levels(crtc_state, &wm_params, wm, COLOR_PLANE_UV);
+ skl_compute_sagv_wm(crtc_state, &wm_params, wm, COLOR_PLANE_UV);
return 0;
}
@@ -5631,9 +5806,25 @@ skl_print_wm_changes(struct intel_atomic_state *state)
for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
enum plane_id plane_id = plane->id;
const struct skl_plane_wm *old_wm, *new_wm;
+ const struct skl_wm_level *old_wm_level, *new_wm_level;
+ u16 old_plane_res_l, new_plane_res_l;
+ u8 old_plane_res_b, new_plane_res_b;
+ u16 old_min_ddb_alloc, new_min_ddb_alloc;
+ int color_plane = 0;
old_wm = &old_pipe_wm->planes[plane_id];
new_wm = &new_pipe_wm->planes[plane_id];
+ old_wm_level = skl_plane_wm_level(old_crtc_state, plane_id, 0, color_plane);
+ new_wm_level = skl_plane_wm_level(new_crtc_state, plane_id, 0, color_plane);
+
+ old_plane_res_l = old_wm_level->plane_res_l;
+ old_plane_res_b = old_wm_level->plane_res_b;
+
+ new_plane_res_l = new_wm_level->plane_res_l;
+ new_plane_res_b = new_wm_level->plane_res_b;
+
+ old_min_ddb_alloc = old_wm_level->min_ddb_alloc;
+ new_min_ddb_alloc = new_wm_level->min_ddb_alloc;
if (skl_plane_wm_equals(dev_priv, old_wm, new_wm))
continue;
@@ -5657,7 +5848,7 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] lines %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d"
" -> %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d\n",
plane->base.base.id, plane->base.name,
- enast(old_wm->wm[0].ignore_lines), old_wm->wm[0].plane_res_l,
+ enast(old_wm->wm[0].ignore_lines), old_plane_res_l,
enast(old_wm->wm[1].ignore_lines), old_wm->wm[1].plane_res_l,
enast(old_wm->wm[2].ignore_lines), old_wm->wm[2].plane_res_l,
enast(old_wm->wm[3].ignore_lines), old_wm->wm[3].plane_res_l,
@@ -5667,7 +5858,7 @@ skl_print_wm_changes(struct intel_atomic_state *state)
enast(old_wm->wm[7].ignore_lines), old_wm->wm[7].plane_res_l,
enast(old_wm->trans_wm.ignore_lines), old_wm->trans_wm.plane_res_l,
- enast(new_wm->wm[0].ignore_lines), new_wm->wm[0].plane_res_l,
+ enast(new_wm->wm[0].ignore_lines), new_plane_res_l,
enast(new_wm->wm[1].ignore_lines), new_wm->wm[1].plane_res_l,
enast(new_wm->wm[2].ignore_lines), new_wm->wm[2].plane_res_l,
enast(new_wm->wm[3].ignore_lines), new_wm->wm[3].plane_res_l,
@@ -5681,12 +5872,12 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] blocks %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
" -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
plane->base.base.id, plane->base.name,
- old_wm->wm[0].plane_res_b, old_wm->wm[1].plane_res_b,
+ old_plane_res_b, old_wm->wm[1].plane_res_b,
old_wm->wm[2].plane_res_b, old_wm->wm[3].plane_res_b,
old_wm->wm[4].plane_res_b, old_wm->wm[5].plane_res_b,
old_wm->wm[6].plane_res_b, old_wm->wm[7].plane_res_b,
old_wm->trans_wm.plane_res_b,
- new_wm->wm[0].plane_res_b, new_wm->wm[1].plane_res_b,
+ new_plane_res_b, new_wm->wm[1].plane_res_b,
new_wm->wm[2].plane_res_b, new_wm->wm[3].plane_res_b,
new_wm->wm[4].plane_res_b, new_wm->wm[5].plane_res_b,
new_wm->wm[6].plane_res_b, new_wm->wm[7].plane_res_b,
@@ -5696,12 +5887,12 @@ skl_print_wm_changes(struct intel_atomic_state *state)
"[PLANE:%d:%s] min_ddb %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
" -> %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
plane->base.base.id, plane->base.name,
- old_wm->wm[0].min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
+ old_min_ddb_alloc, old_wm->wm[1].min_ddb_alloc,
old_wm->wm[2].min_ddb_alloc, old_wm->wm[3].min_ddb_alloc,
old_wm->wm[4].min_ddb_alloc, old_wm->wm[5].min_ddb_alloc,
old_wm->wm[6].min_ddb_alloc, old_wm->wm[7].min_ddb_alloc,
old_wm->trans_wm.min_ddb_alloc,
- new_wm->wm[0].min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
+ new_min_ddb_alloc, new_wm->wm[1].min_ddb_alloc,
new_wm->wm[2].min_ddb_alloc, new_wm->wm[3].min_ddb_alloc,
new_wm->wm[4].min_ddb_alloc, new_wm->wm[5].min_ddb_alloc,
new_wm->wm[6].min_ddb_alloc, new_wm->wm[7].min_ddb_alloc,
@@ -5866,6 +6057,10 @@ skl_compute_wm(struct intel_atomic_state *state)
if (ret)
return ret;
+ ret = intel_compute_sagv_mask(state);
+ if (ret)
+ return ret;
+
/*
* skl_compute_ddb() will have adjusted the final watermarks
* based on how much ddb is available. Now we can actually
@@ -5993,6 +6188,9 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
val = I915_READ(CUR_WM(pipe, level));
skl_wm_level_from_reg_val(val, &wm->wm[level]);
+ if (level == 0)
+ memcpy(&wm->sagv_wm0, &wm->wm[level],
+ sizeof(struct skl_wm_level));
}
if (plane_id != PLANE_CURSOR)
@@ -9,6 +9,7 @@
#include <linux/types.h>
#include "i915_reg.h"
+#include "display/intel_bw.h"
struct drm_device;
struct drm_i915_private;
@@ -41,7 +42,8 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
struct skl_pipe_wm *out);
void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
-bool intel_can_enable_sagv(struct intel_atomic_state *state);
+bool intel_has_sagv(struct drm_i915_private *dev_priv);
+bool intel_can_enable_sagv(struct intel_bw_state *bw_state);
int intel_enable_sagv(struct drm_i915_private *dev_priv);
int intel_disable_sagv(struct drm_i915_private *dev_priv);
bool skl_wm_level_equals(const struct skl_wm_level *l1,
Let's refactor the whole SAGV logic, moving the main calculations from intel_can_enable_sagv to intel_compute_sagv_mask, which also handles this in a unified way calling gen specific functions to evaluate if SAGV is allowed for each crtc. If crtc sagv mask have been changed we serialize access and modify global state. intel_can_enable_sagv now uses bw_state which stores all information related to SAGV and is now a trivial helper. v2: - Rework watermark calculation algorithm to attempt to calculate Level 0 watermark with added sagv block time latency and check if it fits in DBuf in order to determine if SAGV can be enabled already at this stage, just as BSpec 49325 states. if that fails rollback to usual Level 0 latency and disable SAGV. - Remove unneeded tabs(James Ausmus) v3: Rebased the patch v4: - Added back interlaced check for Gen12 and added separate function for TGL SAGV check (thanks to James Ausmus for spotting) - Removed unneeded gen check - Extracted Gen12 SAGV decision making code to a separate function from skl_compute_wm v5: - Added SAGV global state to dev_priv, because we need to track all pipes, not only those in atomic state. Each pipe has now correspondent bit mask reflecting, whether it can tolerate SAGV or not(thanks to Ville Syrjala for suggestions). - Now using active flag instead of enable in crc usage check. v6: - Fixed rebase conflicts v7: - kms_cursor_legacy seems to get broken because of multiple memcpy calls when copying level 0 water marks for enabled SAGV, to fix this now simply using that field right away, without copying, for that introduced a new wm_level accessor which decides which wm_level to return based on SAGV state. v8: - Protect crtc_sagv_mask same way as we do for other global state changes: i.e check if changes are needed, then grab all crtc locks to serialize the changes(Ville Syrjälä) - Add crtc_sagv_mask caching in order to avoid needless recalculations (Matthew Roper) - Put back Gen12 SAGV switch in order to get it enabled in separate patch(Matthew Roper) - Rename *_set_sagv_mask to *_compute_sagv_mask(Matthew Roper) - Check if there are no active pipes in intel_can_enable_sagv instead of platform specific functions(Matthew Roper), same for intel_has_sagv check. v9 - Switched to u8 for crtc_sagv_mask(Ville Syrjälä) - crtc_sagv_mask now is pipe_sagv_mask(Ville Syrjälä) - Extracted sagv checking logic from skl/icl/tgl_compute_sagv_mask - Extracted skl_plane_wm_level function and passing latency to separate patches(Ville Syrjälä) - Removed part of unneeded copy-paste from tgl_check_pipe_fits_sagv_wm (Ville Syrjälä) - Now using simple assignment for sagv_wm0 as it contains only pod types and no pointers(Ville Syrjälä) - Fixed intel_can_enable_sagv not to do double duty, now it only check SAGV bits by ANDing those between local and global state. The SAGV masks are now computed after watermarks are available, in order to be able to figure out if ddb ranges are fitting nicely. (Ville Syrjälä) - Now having uv_sagv_wm0 and sagv_wm0, otherwise we have wrong logic when using skl_plane_wm_level accessor, as we had previously for Gen11+ color plane and regular wm levels, so probably both has to be recalculated with additional SAGV block time for Level 0. v10: - Starting to use new global state for storing pipe_sagv_mask v11: - Fixed rebase conflict with recent drm-tip - Check if we really need to recalculate SAGV mask, otherwise bail out without making any changes. - Use cached SAGV result, instead of recalculating it everytime, if bw_state hasn't changed. v12: - Removed WARN from intel_can_enable_sagv, in some of the commits if we don't recalculated watermarks, bw_state is not recalculated, thus leading to SAGV state not recalculated by the commit state, which is still calling intel_can_enable_sagv function. Fix that by just analyzing the current global bw_state object - because we simply have no other objects related to that. v13: - Rebased, fixed warnings regarding long lines - Changed function call sites from intel_atomic_bw* to intel_wb_* as was suggested.(Jani Nikula) - Taken ddb_state_changed and bw_state_changed into use. v14: - total_affected_planes is no longer needed to check for ddb changes, just as active_pipe_changes. v15: - Fixed stupid mistake with uninitialized crtc in skl_compute_sagv_mask. v16: - Convert pipe_sagv_mask to pipe_sagv_reject and now using inverted flag to indicate SAGV readiness for the pipe(Ville Syrjälä) - Added return value to intel_compute_sagv_mask which call intel_atomic_serialize_global_state in order to properly propagate EDEADLCK to drm. - Based on the discussion with Ville, removed active_pipe_changes check and also there seems to be no need for checking ddb_state_changes as well. Instead we just iterate through crtcs in state - having crtc in a state already guarantees that it is at least read-locked Having additional flag to check if there actually were some plane wm/ddb changes would be probably added later as an optimization. - We can't get parent atomic state from crtc_state at commit stage (nice drm feature), also propagating state through function call chain seems to be overkill and not possible(cursor legacy updates) Querying for bw_state object from global state is not possible as it might get swapped with other global state. So... just sticked can_sagv boolean into wm crtc state. v17: - Skip inactive crtcs, when checking for SAGV-readiness. v18: - Switch to use intel_atomic_crtc_state_for_each_plane_state instead of for_each_intel_plane_on_crtc and fixed previous code, which was using old plane state, which caused NULL ptr dereference, bacause that code is now called before we swap the state. v19: - Use intel_atomic_bw_* pattern again - Optimized sagv checks in verify_wm_state(Ville Syrjälä) - Do intel_compute_sagv_mask after ddb is allocated(Ville Syrjälä), using it's results - Use bw_state in intel_can_enable_sagv - Use COLOR_PLANE enum instead of boolean yuv or "0", "1" magic - Extracted sagv wm0 calculation into separate skl_compute_sagv_wm function(Ville Syrjälä) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@intel.com> Cc: James Ausmus <james.ausmus@intel.com> --- drivers/gpu/drm/i915/display/intel_bw.h | 6 + drivers/gpu/drm/i915/display/intel_display.c | 30 ++- .../drm/i915/display/intel_display_types.h | 3 + drivers/gpu/drm/i915/intel_pm.c | 244 ++++++++++++++++-- drivers/gpu/drm/i915/intel_pm.h | 4 +- 5 files changed, 256 insertions(+), 31 deletions(-)