[v23,07/13] drm/i915: Use bw state for per crtc SAGV evaluation

Commit Message

Stanislav Lisovskiy April 10, 2020, 12:26 p.m. UTC

Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.

v2: - Add has_sagv check to intel_crtc_can_enable_sagv
      so that it sets bit in reject mask.
    - Use bw_state in intel_pre/post_plane_enable_sagv
      instead of atomic state

Signed-off-by: Stanislav Lisovskiy <[e-mail]>
Cc: Ville Syrjälä <[e-mail]>
Cc: James Ausmus <[e-mail]>
---
 drivers/gpu/drm/i915/display/intel_bw.h |  6 ++
 drivers/gpu/drm/i915/intel_pm.c         | 98 ++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_pm.h         |  4 +-
 3 files changed, 90 insertions(+), 18 deletions(-)

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index ac004d6f4276..d6df91058223 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -18,6 +18,12 @@  struct intel_crtc_state;
 struct intel_bw_state {
 	struct intel_global_state base;
 
+	/*
+	 * Contains a bit mask, used to determine, whether correspondent
+	 * pipe allows SAGV or not.
+	 */
+	u8 pipe_sagv_reject;
+
 	unsigned int data_rate[I915_MAX_PIPES];
 	u8 num_active_planes[I915_MAX_PIPES];
 };
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 88637f006add..a3c8c0c7a503 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -43,6 +43,7 @@ 
 #include "i915_fixed.h"
 #include "i915_irq.h"
 #include "i915_trace.h"
+#include "display/intel_bw.h"
 #include "intel_pm.h"
 #include "intel_sideband.h"
 #include "../../../platform/x86/intel_ips.h"
@@ -3634,7 +3635,7 @@  static bool skl_needs_memory_bw_wa(struct drm_i915_private *dev_priv)
 	return IS_GEN9_BC(dev_priv) || IS_BROXTON(dev_priv);
 }
 
-static bool
+bool
 intel_has_sagv(struct drm_i915_private *dev_priv)
 {
 	/* HACK! */
@@ -3760,8 +3761,23 @@  intel_disable_sagv(struct drm_i915_private *dev_priv)
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_bw_state *new_bw_state = NULL;
 
-	if (!intel_can_enable_sagv(state)) {
+	/*
+	 * Just return if we can't control SAGV or don't have it.
+	 * This is different from situation when we have SAGV but just can't
+	 * afford it due to DBuf limitation - in case if SAGV is completely
+	 * disabled in a BIOS, we are not even allowed to send a PCode request,
+	 * as it will throw an error. So have to check it here.
+	 */
+	if (!intel_has_sagv(dev_priv))
+		return;
+
+	new_bw_state = intel_atomic_get_new_bw_state(state);
+	if (!new_bw_state)
+		return;
+
+	if (!intel_can_enable_sagv(new_bw_state)) {
 		intel_disable_sagv(dev_priv);
 		return;
 	}
@@ -3770,8 +3786,23 @@  void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
 void intel_sagv_post_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_bw_state *new_bw_state = NULL;
 
-	if (intel_can_enable_sagv(state)) {
+	/*
+	 * Just return if we can't control SAGV or don't have it.
+	 * This is different from situation when we have SAGV but just can't
+	 * afford it due to DBuf limitation - in case if SAGV is completely
+	 * disabled in a BIOS, we are not even allowed to send a PCode request,
+	 * as it will throw an error. So have to check it here.
+	 */
+	if (!intel_has_sagv(dev_priv))
+		return;
+
+	new_bw_state = intel_atomic_get_new_bw_state(state);
+	if (!new_bw_state)
+		return;
+
+	if (intel_can_enable_sagv(new_bw_state)) {
 		intel_enable_sagv(dev_priv);
 		return;
 	}
@@ -3779,15 +3810,26 @@  void intel_sagv_post_plane_update(struct intel_atomic_state *state)
 
 static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
 {
+	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct intel_plane *plane;
 	const struct intel_plane_state *plane_state;
 	int level, latency;
 
+	if (!intel_has_sagv(dev_priv))
+		return false;
+
 	if (!crtc_state->hw.active)
 		return true;
 
+	/*
+	 * SKL+ workaround: bspec recommends we disable SAGV when we have
+	 * more then one pipe enabled
+	 */
+	if (hweight8(state->active_pipes) > 1)
+		return false;
+
 	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
 		DRM_DEBUG_KMS("No SAGV for interlaced mode on pipe %c\n",
 			      pipe_name(crtc->pipe));
@@ -3826,29 +3868,47 @@  static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state
 	return true;
 }
 
-bool intel_can_enable_sagv(struct intel_atomic_state *state)
+bool intel_can_enable_sagv(const struct intel_bw_state *bw_state)
+{
+	return bw_state->pipe_sagv_reject == 0;
+}
+
+static int intel_compute_sagv_mask(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	int ret;
 	struct intel_crtc *crtc;
 	const struct intel_crtc_state *crtc_state;
 	enum pipe pipe;
+	struct intel_crtc_state *new_crtc_state;
+	struct intel_bw_state *new_bw_state = NULL;
+	const struct intel_bw_state *old_bw_state = NULL;
+	int i;
 
-	if (!intel_has_sagv(dev_priv))
-		return false;
+	for_each_new_intel_crtc_in_state(state, crtc,
+					 new_crtc_state, i) {
+		new_bw_state = intel_atomic_get_bw_state(state);
+		if (IS_ERR(new_bw_state))
+			return PTR_ERR(new_bw_state);
 
-	/*
-	 * SKL+ workaround: bspec recommends we disable SAGV when we have
-	 * more then one pipe enabled
-	 */
-	if (hweight8(state->active_pipes) > 1)
-		return false;
+		old_bw_state = intel_atomic_get_old_bw_state(state);
 
-	/* Since we're now guaranteed to only have one active CRTC... */
-	pipe = ffs(state->active_pipes) - 1;
-	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
-	crtc_state = to_intel_crtc_state(crtc->base.state);
+		if (intel_crtc_can_enable_sagv(new_crtc_state))
+			new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe);
+		else
+			new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe);
+	}
+
+	if (!old_bw_state)
+		return 0;
+
+	if (new_bw_state->pipe_sagv_reject != old_bw_state->pipe_sagv_reject) {
+		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+		if (ret)
+			return ret;
+	}
 
-	return intel_crtc_can_enable_sagv(crtc_state);
+	return 0;
 }
 
 /*
@@ -5863,6 +5923,10 @@  skl_compute_wm(struct intel_atomic_state *state)
 	if (ret)
 		return ret;
 
+	ret = intel_compute_sagv_mask(state);
+	if (ret)
+		return ret;
+
 	/*
 	 * skl_compute_ddb() will have adjusted the final watermarks
 	 * based on how much ddb is available. Now we can actually
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index 9a6036ab0f90..abefc4205d0b 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -9,6 +9,7 @@ 
 #include <linux/types.h>
 
 #include "i915_reg.h"
+#include "display/intel_bw.h"
 
 struct drm_device;
 struct drm_i915_private;
@@ -41,7 +42,8 @@  void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
 			      struct skl_pipe_wm *out);
 void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
 void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
-bool intel_can_enable_sagv(struct intel_atomic_state *state);
+bool intel_has_sagv(struct drm_i915_private *dev_priv);
+bool intel_can_enable_sagv(const struct intel_bw_state *bw_state);
 int intel_enable_sagv(struct drm_i915_private *dev_priv);
 int intel_disable_sagv(struct drm_i915_private *dev_priv);
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state);