| Message ID | 20210811212314.153269-4-juston.li@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/i915/hdcp: HDCP2.2 MST dock fixes | expand |
On 2021-08-11 at 14:23:14 -0700, Juston Li wrote: > On some MST docking stations, rx_info can only be read after > RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set > otherwise the read will return -EIO. > > This behavior causes the mst stream type1 capability test to fail to > read rx_info and determine if the topology supports type1 and fallback > to type0. > > To fix this, check for type1 capability when we receive rx_info within > the AKE flow when we read RepeaterAuth_Send_ReceiverID_List instead > of an explicit read just for type1 capability checking. > > This does require moving where we set stream_types to after > hdcp2_authenticate_sink() when we get rx_info but this occurs before we > do hdcp2_propagate_stream_management_info. > > Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check for > that as well. > > Changes since v2: > - Remove no longer used variables in _intel_hdcp2_enable() > > Signed-off-by: Juston Li <juston.li@intel.com> > Reviewed-by: Ramalingam C <ramalingam.c@intel.com> > --- > .../drm/i915/display/intel_display_types.h | 2 + > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 39 --------------- > drivers/gpu/drm/i915/display/intel_hdcp.c | 49 ++++++++----------- > 3 files changed, 23 insertions(+), 67 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h > index dbdfe54d0340..c8b687ff0374 100644 > --- a/drivers/gpu/drm/i915/display/intel_display_types.h > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h > @@ -516,6 +516,8 @@ struct intel_hdcp { > enum transcoder cpu_transcoder; > /* Only used for DP MST stream encryption */ > enum transcoder stream_transcoder; > + > + bool topology_type1_capable; Topology is not going to be change for each connector in mst topology. IMHO dig_port should contain this, prefix by mst as this is specific to mst usages. > }; > > struct intel_connector { > diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > index fbfb3c4d16bb..540a669e01dd 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct intel_digital_port *dig_port, > return size; > } > > -static int > -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port *dig_port, bool *hdcp_1_x) > -{ > - u8 rx_info[HDCP_2_2_RXINFO_LEN]; > - int ret; > - > - ret = drm_dp_dpcd_read(&dig_port->dp.aux, > - DP_HDCP_2_2_REG_RXINFO_OFFSET, > - (void *)rx_info, HDCP_2_2_RXINFO_LEN); > - > - if (ret != HDCP_2_2_RXINFO_LEN) > - return ret >= 0 ? -EIO : ret; > - > - *hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? true : false; > - return 0; > -} > - > static > ssize_t get_receiver_id_list_rx_info(struct intel_digital_port *dig_port, u32 *dev_cnt, u8 *byte) > { > @@ -665,27 +648,6 @@ int intel_dp_hdcp2_capable(struct intel_digital_port *dig_port, > return 0; > } > > -static > -int intel_dp_mst_streams_type1_capable(struct intel_connector *connector, > - bool *capable) > -{ > - struct intel_digital_port *dig_port = intel_attached_dig_port(connector); > - struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); > - int ret; > - bool hdcp_1_x; > - > - ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, &hdcp_1_x); > - if (ret) { > - drm_dbg_kms(&i915->drm, > - "[%s:%d] failed to read RxInfo ret=%d\n", > - connector->base.name, connector->base.base.id, ret); > - return ret; > - } > - > - *capable = !hdcp_1_x; > - return 0; > -} > - > static const struct intel_hdcp_shim intel_dp_hdcp_shim = { > .write_an_aksv = intel_dp_hdcp_write_an_aksv, > .read_bksv = intel_dp_hdcp_read_bksv, > @@ -834,7 +796,6 @@ static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = { > .stream_2_2_encryption = intel_dp_mst_hdcp2_stream_encryption, > .check_2_2_link = intel_dp_mst_hdcp2_check_link, > .hdcp_2_2_capable = intel_dp_hdcp2_capable, > - .streams_type1_capable = intel_dp_mst_streams_type1_capable, > .protocol = HDCP_PROTOCOL_DP, > }; > > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c > index ebc2e32aec0b..1a2a98e2c6e3 100644 > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c > @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct intel_connector *connector) > return connector->port ? connector->port->vcpi.vcpi : 0; > } > > -static bool > -intel_streams_type1_capable(struct intel_connector *connector) > -{ > - const struct intel_hdcp_shim *shim = connector->hdcp.shim; > - bool capable = false; > - > - if (!shim) > - return capable; > - > - if (shim->streams_type1_capable) > - shim->streams_type1_capable(connector, &capable); > - > - return capable; > -} > - > /* > * intel_hdcp_required_content_stream selects the most highest common possible HDCP > * content_type for all streams in DP MST topology because security f/w doesn't > @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct intel_digital_port *dig_port) > if (conn_dig_port != dig_port) > continue; > > - if (!enforce_type0 && !intel_streams_type1_capable(connector)) > + if (!enforce_type0 && !connector->hdcp.topology_type1_capable) > enforce_type0 = true; > > data->streams[data->k].stream_id = intel_conn_to_vcpi(connector); > @@ -1632,6 +1617,14 @@ int hdcp2_authenticate_repeater_topology(struct intel_connector *connector) > return -EINVAL; > } > > + /* > + * A topology is not Type 1 capable if it contains a downstream device > + * that is HDCP 1.x or Legacy HDCP 2.0/2.1 compliant. > + */ > + hdcp->topology_type1_capable = > + !HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) && > + !HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]); > + > /* Converting and Storing the seq_num_v to local variable as DWORD */ > seq_num_v = > drm_hdcp_be24_to_cpu((const u8 *)msgs.recvid_list.seq_num_v); > @@ -1871,11 +1864,23 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector) > { > struct intel_digital_port *dig_port = intel_attached_dig_port(connector); > struct drm_i915_private *i915 = to_i915(connector->base.dev); > + struct hdcp_port_data *data = &dig_port->hdcp_port_data; > + struct intel_hdcp *hdcp = &connector->hdcp; > int ret = 0, i, tries = 3; > > for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) { > ret = hdcp2_authenticate_sink(connector); > if (!ret) { > + /* Stream which requires encryption */ > + if (!intel_encoder_is_mst(intel_attached_encoder(connector))) { > + data->k = 1; > + data->streams[0].stream_type = hdcp->content_type; > + } else { > + ret = intel_hdcp_required_content_stream(dig_port); > + if (ret) > + return ret; > + } > + It will be good to use helper function to init streams here. Thanks, Anshuman Gupta. > ret = hdcp2_propagate_stream_management_info(connector); > if (ret) { > drm_dbg_kms(&i915->drm, > @@ -1921,9 +1926,7 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector) > > static int _intel_hdcp2_enable(struct intel_connector *connector) > { > - struct intel_digital_port *dig_port = intel_attached_dig_port(connector); > struct drm_i915_private *i915 = to_i915(connector->base.dev); > - struct hdcp_port_data *data = &dig_port->hdcp_port_data; > struct intel_hdcp *hdcp = &connector->hdcp; > int ret; > > @@ -1931,16 +1934,6 @@ static int _intel_hdcp2_enable(struct intel_connector *connector) > connector->base.name, connector->base.base.id, > hdcp->content_type); > > - /* Stream which requires encryption */ > - if (!intel_encoder_is_mst(intel_attached_encoder(connector))) { > - data->k = 1; > - data->streams[0].stream_type = hdcp->content_type; > - } else { > - ret = intel_hdcp_required_content_stream(dig_port); > - if (ret) > - return ret; > - } > - > ret = hdcp2_authenticate_and_encrypt(connector); > if (ret) { > drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed. (%d)\n", > -- > 2.31.1 >
On Thu, 2021-08-12 at 12:40 +0530, Anshuman Gupta wrote: > On 2021-08-11 at 14:23:14 -0700, Juston Li wrote: > > On some MST docking stations, rx_info can only be read after > > RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set > > otherwise the read will return -EIO. > > > > This behavior causes the mst stream type1 capability test to fail > > to > > read rx_info and determine if the topology supports type1 and > > fallback > > to type0. > > > > To fix this, check for type1 capability when we receive rx_info > > within > > the AKE flow when we read RepeaterAuth_Send_ReceiverID_List instead > > of an explicit read just for type1 capability checking. > > > > This does require moving where we set stream_types to after > > hdcp2_authenticate_sink() when we get rx_info but this occurs > > before we > > do hdcp2_propagate_stream_management_info. > > > > Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check > > for > > that as well. > > > > Changes since v2: > > - Remove no longer used variables in _intel_hdcp2_enable() > > > > Signed-off-by: Juston Li <juston.li@intel.com> > > Reviewed-by: Ramalingam C <ramalingam.c@intel.com> > > --- > > .../drm/i915/display/intel_display_types.h | 2 + > > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 39 --------------- > > drivers/gpu/drm/i915/display/intel_hdcp.c | 49 ++++++++------- > > ---- > > 3 files changed, 23 insertions(+), 67 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h > > b/drivers/gpu/drm/i915/display/intel_display_types.h > > index dbdfe54d0340..c8b687ff0374 100644 > > --- a/drivers/gpu/drm/i915/display/intel_display_types.h > > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h > > @@ -516,6 +516,8 @@ struct intel_hdcp { > > enum transcoder cpu_transcoder; > > /* Only used for DP MST stream encryption */ > > enum transcoder stream_transcoder; > > + > > + bool topology_type1_capable; > Topology is not going to be change for each connector in mst > topology. > IMHO dig_port should contain this, prefix by mst as this is specific > to mst usages. Sure, will move to intel_digital_port and I settled on renaming it hdcp_mst_type1_capable > > }; > > > > struct intel_connector { > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > > b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > > index fbfb3c4d16bb..540a669e01dd 100644 > > --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > > +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > > @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct > > intel_digital_port *dig_port, > > return size; > > } > > > > -static int > > -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port > > *dig_port, bool *hdcp_1_x) > > -{ > > - u8 rx_info[HDCP_2_2_RXINFO_LEN]; > > - int ret; > > - > > - ret = drm_dp_dpcd_read(&dig_port->dp.aux, > > - DP_HDCP_2_2_REG_RXINFO_OFFSET, > > - (void *)rx_info, > > HDCP_2_2_RXINFO_LEN); > > - > > - if (ret != HDCP_2_2_RXINFO_LEN) > > - return ret >= 0 ? -EIO : ret; > > - > > - *hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? > > true : false; > > - return 0; > > -} > > - > > static > > ssize_t get_receiver_id_list_rx_info(struct intel_digital_port > > *dig_port, u32 *dev_cnt, u8 *byte) > > { > > @@ -665,27 +648,6 @@ int intel_dp_hdcp2_capable(struct > > intel_digital_port *dig_port, > > return 0; > > } > > > > -static > > -int intel_dp_mst_streams_type1_capable(struct intel_connector > > *connector, > > - bool *capable) > > -{ > > - struct intel_digital_port *dig_port = > > intel_attached_dig_port(connector); > > - struct drm_i915_private *i915 = to_i915(dig_port- > > >base.base.dev); > > - int ret; > > - bool hdcp_1_x; > > - > > - ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, > > &hdcp_1_x); > > - if (ret) { > > - drm_dbg_kms(&i915->drm, > > - "[%s:%d] failed to read RxInfo > > ret=%d\n", > > - connector->base.name, connector- > > >base.base.id, ret); > > - return ret; > > - } > > - > > - *capable = !hdcp_1_x; > > - return 0; > > -} > > - > > static const struct intel_hdcp_shim intel_dp_hdcp_shim = { > > .write_an_aksv = intel_dp_hdcp_write_an_aksv, > > .read_bksv = intel_dp_hdcp_read_bksv, > > @@ -834,7 +796,6 @@ static const struct intel_hdcp_shim > > intel_dp_mst_hdcp_shim = { > > .stream_2_2_encryption = > > intel_dp_mst_hdcp2_stream_encryption, > > .check_2_2_link = intel_dp_mst_hdcp2_check_link, > > .hdcp_2_2_capable = intel_dp_hdcp2_capable, > > - .streams_type1_capable = > > intel_dp_mst_streams_type1_capable, > > .protocol = HDCP_PROTOCOL_DP, > > }; > > > > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c > > b/drivers/gpu/drm/i915/display/intel_hdcp.c > > index ebc2e32aec0b..1a2a98e2c6e3 100644 > > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c > > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c > > @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct > > intel_connector *connector) > > return connector->port ? connector->port->vcpi.vcpi : 0; > > } > > > > -static bool > > -intel_streams_type1_capable(struct intel_connector *connector) > > -{ > > - const struct intel_hdcp_shim *shim = connector->hdcp.shim; > > - bool capable = false; > > - > > - if (!shim) > > - return capable; > > - > > - if (shim->streams_type1_capable) > > - shim->streams_type1_capable(connector, &capable); > > - > > - return capable; > > -} > > - > > /* > > * intel_hdcp_required_content_stream selects the most highest > > common possible HDCP > > * content_type for all streams in DP MST topology because > > security f/w doesn't > > @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct > > intel_digital_port *dig_port) > > if (conn_dig_port != dig_port) > > continue; > > > > - if (!enforce_type0 && > > !intel_streams_type1_capable(connector)) > > + if (!enforce_type0 && !connector- > > >hdcp.topology_type1_capable) > > enforce_type0 = true; > > > > data->streams[data->k].stream_id = > > intel_conn_to_vcpi(connector); > > @@ -1632,6 +1617,14 @@ int > > hdcp2_authenticate_repeater_topology(struct intel_connector > > *connector) > > return -EINVAL; > > } > > > > + /* > > + * A topology is not Type 1 capable if it contains a > > downstream device > > + * that is HDCP 1.x or Legacy HDCP 2.0/2.1 compliant. > > + */ > > + hdcp->topology_type1_capable = > > + !HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) && > > + !HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]); > > + > > /* Converting and Storing the seq_num_v to local variable > > as DWORD */ > > seq_num_v = > > drm_hdcp_be24_to_cpu((const u8 > > *)msgs.recvid_list.seq_num_v); > > @@ -1871,11 +1864,23 @@ static int > > hdcp2_authenticate_and_encrypt(struct intel_connector *connector) > > { > > struct intel_digital_port *dig_port = > > intel_attached_dig_port(connector); > > struct drm_i915_private *i915 = to_i915(connector- > > >base.dev); > > + struct hdcp_port_data *data = &dig_port->hdcp_port_data; > > + struct intel_hdcp *hdcp = &connector->hdcp; > > int ret = 0, i, tries = 3; > > > > for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) > > { > > ret = hdcp2_authenticate_sink(connector); > > if (!ret) { > > + /* Stream which requires encryption */ > > + if > > (!intel_encoder_is_mst(intel_attached_encoder(connector))) { > > + data->k = 1; > > + data->streams[0].stream_type = > > hdcp->content_type; > > + } else { > > + ret = > > intel_hdcp_required_content_stream(dig_port); > > + if (ret) > > + return ret; > > + } > > + > It will be good to use helper function to init streams here. Sure, will move this to a helper function. Also fix shouldn't return here, should break and let loop retry. Thanks! > Thanks, > Anshuman Gupta. > > ret = > > hdcp2_propagate_stream_management_info(connector); > > if (ret) { > > drm_dbg_kms(&i915->drm, > > @@ -1921,9 +1926,7 @@ static int > > hdcp2_authenticate_and_encrypt(struct intel_connector *connector) > > > > static int _intel_hdcp2_enable(struct intel_connector *connector) > > { > > - struct intel_digital_port *dig_port = > > intel_attached_dig_port(connector); > > struct drm_i915_private *i915 = to_i915(connector- > > >base.dev); > > - struct hdcp_port_data *data = &dig_port->hdcp_port_data; > > struct intel_hdcp *hdcp = &connector->hdcp; > > int ret; > > > > @@ -1931,16 +1934,6 @@ static int _intel_hdcp2_enable(struct > > intel_connector *connector) > > connector->base.name, connector->base.base.id, > > hdcp->content_type); > > > > - /* Stream which requires encryption */ > > - if > > (!intel_encoder_is_mst(intel_attached_encoder(connector))) { > > - data->k = 1; > > - data->streams[0].stream_type = hdcp->content_type; > > - } else { > > - ret = intel_hdcp_required_content_stream(dig_port); > > - if (ret) > > - return ret; > > - } > > - > > ret = hdcp2_authenticate_and_encrypt(connector); > > if (ret) { > > drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling > > Failed. (%d)\n", > > -- > > 2.31.1 > >
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index dbdfe54d0340..c8b687ff0374 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -516,6 +516,8 @@ struct intel_hdcp { enum transcoder cpu_transcoder; /* Only used for DP MST stream encryption */ enum transcoder stream_transcoder; + + bool topology_type1_capable; }; struct intel_connector { diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c index fbfb3c4d16bb..540a669e01dd 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct intel_digital_port *dig_port, return size; } -static int -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port *dig_port, bool *hdcp_1_x) -{ - u8 rx_info[HDCP_2_2_RXINFO_LEN]; - int ret; - - ret = drm_dp_dpcd_read(&dig_port->dp.aux, - DP_HDCP_2_2_REG_RXINFO_OFFSET, - (void *)rx_info, HDCP_2_2_RXINFO_LEN); - - if (ret != HDCP_2_2_RXINFO_LEN) - return ret >= 0 ? -EIO : ret; - - *hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? true : false; - return 0; -} - static ssize_t get_receiver_id_list_rx_info(struct intel_digital_port *dig_port, u32 *dev_cnt, u8 *byte) { @@ -665,27 +648,6 @@ int intel_dp_hdcp2_capable(struct intel_digital_port *dig_port, return 0; } -static -int intel_dp_mst_streams_type1_capable(struct intel_connector *connector, - bool *capable) -{ - struct intel_digital_port *dig_port = intel_attached_dig_port(connector); - struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); - int ret; - bool hdcp_1_x; - - ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, &hdcp_1_x); - if (ret) { - drm_dbg_kms(&i915->drm, - "[%s:%d] failed to read RxInfo ret=%d\n", - connector->base.name, connector->base.base.id, ret); - return ret; - } - - *capable = !hdcp_1_x; - return 0; -} - static const struct intel_hdcp_shim intel_dp_hdcp_shim = { .write_an_aksv = intel_dp_hdcp_write_an_aksv, .read_bksv = intel_dp_hdcp_read_bksv, @@ -834,7 +796,6 @@ static const struct intel_hdcp_shim intel_dp_mst_hdcp_shim = { .stream_2_2_encryption = intel_dp_mst_hdcp2_stream_encryption, .check_2_2_link = intel_dp_mst_hdcp2_check_link, .hdcp_2_2_capable = intel_dp_hdcp2_capable, - .streams_type1_capable = intel_dp_mst_streams_type1_capable, .protocol = HDCP_PROTOCOL_DP, }; diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c index ebc2e32aec0b..1a2a98e2c6e3 100644 --- a/drivers/gpu/drm/i915/display/intel_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct intel_connector *connector) return connector->port ? connector->port->vcpi.vcpi : 0; } -static bool -intel_streams_type1_capable(struct intel_connector *connector) -{ - const struct intel_hdcp_shim *shim = connector->hdcp.shim; - bool capable = false; - - if (!shim) - return capable; - - if (shim->streams_type1_capable) - shim->streams_type1_capable(connector, &capable); - - return capable; -} - /* * intel_hdcp_required_content_stream selects the most highest common possible HDCP * content_type for all streams in DP MST topology because security f/w doesn't @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct intel_digital_port *dig_port) if (conn_dig_port != dig_port) continue; - if (!enforce_type0 && !intel_streams_type1_capable(connector)) + if (!enforce_type0 && !connector->hdcp.topology_type1_capable) enforce_type0 = true; data->streams[data->k].stream_id = intel_conn_to_vcpi(connector); @@ -1632,6 +1617,14 @@ int hdcp2_authenticate_repeater_topology(struct intel_connector *connector) return -EINVAL; } + /* + * A topology is not Type 1 capable if it contains a downstream device + * that is HDCP 1.x or Legacy HDCP 2.0/2.1 compliant. + */ + hdcp->topology_type1_capable = + !HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) && + !HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]); + /* Converting and Storing the seq_num_v to local variable as DWORD */ seq_num_v = drm_hdcp_be24_to_cpu((const u8 *)msgs.recvid_list.seq_num_v); @@ -1871,11 +1864,23 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector) { struct intel_digital_port *dig_port = intel_attached_dig_port(connector); struct drm_i915_private *i915 = to_i915(connector->base.dev); + struct hdcp_port_data *data = &dig_port->hdcp_port_data; + struct intel_hdcp *hdcp = &connector->hdcp; int ret = 0, i, tries = 3; for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) { ret = hdcp2_authenticate_sink(connector); if (!ret) { + /* Stream which requires encryption */ + if (!intel_encoder_is_mst(intel_attached_encoder(connector))) { + data->k = 1; + data->streams[0].stream_type = hdcp->content_type; + } else { + ret = intel_hdcp_required_content_stream(dig_port); + if (ret) + return ret; + } + ret = hdcp2_propagate_stream_management_info(connector); if (ret) { drm_dbg_kms(&i915->drm, @@ -1921,9 +1926,7 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector) static int _intel_hdcp2_enable(struct intel_connector *connector) { - struct intel_digital_port *dig_port = intel_attached_dig_port(connector); struct drm_i915_private *i915 = to_i915(connector->base.dev); - struct hdcp_port_data *data = &dig_port->hdcp_port_data; struct intel_hdcp *hdcp = &connector->hdcp; int ret; @@ -1931,16 +1934,6 @@ static int _intel_hdcp2_enable(struct intel_connector *connector) connector->base.name, connector->base.base.id, hdcp->content_type); - /* Stream which requires encryption */ - if (!intel_encoder_is_mst(intel_attached_encoder(connector))) { - data->k = 1; - data->streams[0].stream_type = hdcp->content_type; - } else { - ret = intel_hdcp_required_content_stream(dig_port); - if (ret) - return ret; - } - ret = hdcp2_authenticate_and_encrypt(connector); if (ret) { drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed. (%d)\n",