@@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
Display Refresh Rate Switching (DRRS)
-------------------------------------
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:doc: Display Refresh Rate Switching (DRRS)
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_dp_set_drrs_state
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_edp_drrs_enable
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_edp_drrs_disable
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_edp_drrs_invalidate
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_edp_drrs_flush
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
+.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
:functions: intel_dp_drrs_init
DPIO
@@ -213,6 +213,7 @@ i915-y += \
display/intel_dpll.o \
display/intel_dpll_mgr.o \
display/intel_dpt.o \
+ display/intel_drrs.o \
display/intel_dsb.o \
display/intel_fb.o \
display/intel_fbc.o \
@@ -41,6 +41,7 @@
#include "intel_dp_link_training.h"
#include "intel_dp_mst.h"
#include "intel_dpio_phy.h"
+#include "intel_drrs.h"
#include "intel_dsi.h"
#include "intel_fdi.h"
#include "intel_fifo_underrun.h"
@@ -13,6 +13,7 @@
#include "intel_display_types.h"
#include "intel_dmc.h"
#include "intel_dp.h"
+#include "intel_drrs.h"
#include "intel_fbc.h"
#include "intel_hdcp.h"
#include "intel_hdmi.h"
@@ -56,6 +56,7 @@
#include "intel_dp_mst.h"
#include "intel_dpio_phy.h"
#include "intel_dpll.h"
+#include "intel_drrs.h"
#include "intel_fifo_underrun.h"
#include "intel_hdcp.h"
#include "intel_hdmi.h"
@@ -1676,46 +1677,6 @@ intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
}
-static void
-intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
- struct intel_crtc_state *pipe_config,
- int output_bpp, bool constant_n)
-{
- struct intel_connector *intel_connector = intel_dp->attached_connector;
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- int pixel_clock;
-
- if (pipe_config->vrr.enable)
- return;
-
- /*
- * DRRS and PSR can't be enable together, so giving preference to PSR
- * as it allows more power-savings by complete shutting down display,
- * so to guarantee this, intel_dp_drrs_compute_config() must be called
- * after intel_psr_compute_config().
- */
- if (pipe_config->has_psr)
- return;
-
- if (!intel_connector->panel.downclock_mode ||
- dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
- return;
-
- pipe_config->has_drrs = true;
-
- pixel_clock = intel_connector->panel.downclock_mode->clock;
- if (pipe_config->splitter.enable)
- pixel_clock /= pipe_config->splitter.link_count;
-
- intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
- pipe_config->port_clock, &pipe_config->dp_m2_n2,
- constant_n, pipe_config->fec_enable);
-
- /* FIXME: abstract this better */
- if (pipe_config->splitter.enable)
- pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
-}
-
int
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
@@ -4783,432 +4744,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
drm_connector_attach_vrr_capable_property(connector);
}
-/**
- * intel_dp_set_drrs_state - program registers for RR switch to take effect
- * @dev_priv: i915 device
- * @crtc_state: a pointer to the active intel_crtc_state
- * @refresh_rate: RR to be programmed
- *
- * This function gets called when refresh rate (RR) has to be changed from
- * one frequency to another. Switches can be between high and low RR
- * supported by the panel or to any other RR based on media playback (in
- * this case, RR value needs to be passed from user space).
- *
- * The caller of this function needs to take a lock on dev_priv->drrs.
- */
-static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
- const struct intel_crtc_state *crtc_state,
- int refresh_rate)
-{
- struct intel_dp *intel_dp = dev_priv->drrs.dp;
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
-
- if (refresh_rate <= 0) {
- drm_dbg_kms(&dev_priv->drm,
- "Refresh rate should be positive non-zero.\n");
- return;
- }
-
- if (intel_dp == NULL) {
- drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
- return;
- }
-
- if (!crtc) {
- drm_dbg_kms(&dev_priv->drm,
- "DRRS: intel_crtc not initialized\n");
- return;
- }
-
- if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
- drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
- return;
- }
-
- if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
- refresh_rate)
- index = DRRS_LOW_RR;
-
- if (index == dev_priv->drrs.refresh_rate_type) {
- drm_dbg_kms(&dev_priv->drm,
- "DRRS requested for previously set RR...ignoring\n");
- return;
- }
-
- if (!crtc_state->hw.active) {
- drm_dbg_kms(&dev_priv->drm,
- "eDP encoder disabled. CRTC not Active\n");
- return;
- }
-
- if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
- switch (index) {
- case DRRS_HIGH_RR:
- intel_dp_set_m_n(crtc_state, M1_N1);
- break;
- case DRRS_LOW_RR:
- intel_dp_set_m_n(crtc_state, M2_N2);
- break;
- case DRRS_MAX_RR:
- default:
- drm_err(&dev_priv->drm,
- "Unsupported refreshrate type\n");
- }
- } else if (DISPLAY_VER(dev_priv) > 6) {
- i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
- u32 val;
-
- val = intel_de_read(dev_priv, reg);
- if (index > DRRS_HIGH_RR) {
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
- else
- val |= PIPECONF_EDP_RR_MODE_SWITCH;
- } else {
- if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
- val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
- else
- val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
- }
- intel_de_write(dev_priv, reg, val);
- }
-
- dev_priv->drrs.refresh_rate_type = index;
-
- drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
- refresh_rate);
-}
-
-static void
-intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- dev_priv->drrs.busy_frontbuffer_bits = 0;
- dev_priv->drrs.dp = intel_dp;
-}
-
-/**
- * intel_edp_drrs_enable - init drrs struct if supported
- * @intel_dp: DP struct
- * @crtc_state: A pointer to the active crtc state.
- *
- * Initializes frontbuffer_bits and drrs.dp
- */
-void intel_edp_drrs_enable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (!crtc_state->has_drrs)
- return;
-
- drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
-
- mutex_lock(&dev_priv->drrs.mutex);
-
- if (dev_priv->drrs.dp) {
- drm_warn(&dev_priv->drm, "DRRS already enabled\n");
- goto unlock;
- }
-
- intel_edp_drrs_enable_locked(intel_dp);
-
-unlock:
- mutex_unlock(&dev_priv->drrs.mutex);
-}
-
-static void
-intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
- int refresh;
-
- refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
- intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
- }
-
- dev_priv->drrs.dp = NULL;
-}
-
-/**
- * intel_edp_drrs_disable - Disable DRRS
- * @intel_dp: DP struct
- * @old_crtc_state: Pointer to old crtc_state.
- *
- */
-void intel_edp_drrs_disable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *old_crtc_state)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (!old_crtc_state->has_drrs)
- return;
-
- mutex_lock(&dev_priv->drrs.mutex);
- if (!dev_priv->drrs.dp) {
- mutex_unlock(&dev_priv->drrs.mutex);
- return;
- }
-
- intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
- mutex_unlock(&dev_priv->drrs.mutex);
-
- cancel_delayed_work_sync(&dev_priv->drrs.work);
-}
-
-/**
- * intel_edp_drrs_update - Update DRRS state
- * @intel_dp: Intel DP
- * @crtc_state: new CRTC state
- *
- * This function will update DRRS states, disabling or enabling DRRS when
- * executing fastsets. For full modeset, intel_edp_drrs_disable() and
- * intel_edp_drrs_enable() should be called instead.
- */
-void
-intel_edp_drrs_update(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-
- if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
- return;
-
- mutex_lock(&dev_priv->drrs.mutex);
-
- /* New state matches current one? */
- if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
- goto unlock;
-
- if (crtc_state->has_drrs)
- intel_edp_drrs_enable_locked(intel_dp);
- else
- intel_edp_drrs_disable_locked(intel_dp, crtc_state);
-
-unlock:
- mutex_unlock(&dev_priv->drrs.mutex);
-}
-
-static void intel_edp_drrs_downclock_work(struct work_struct *work)
-{
- struct drm_i915_private *dev_priv =
- container_of(work, typeof(*dev_priv), drrs.work.work);
- struct intel_dp *intel_dp;
-
- mutex_lock(&dev_priv->drrs.mutex);
-
- intel_dp = dev_priv->drrs.dp;
-
- if (!intel_dp)
- goto unlock;
-
- /*
- * The delayed work can race with an invalidate hence we need to
- * recheck.
- */
-
- if (dev_priv->drrs.busy_frontbuffer_bits)
- goto unlock;
-
- if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
- struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
-
- intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
- drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
- }
-
-unlock:
- mutex_unlock(&dev_priv->drrs.mutex);
-}
-
-/**
- * intel_edp_drrs_invalidate - Disable Idleness DRRS
- * @dev_priv: i915 device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * This function gets called everytime rendering on the given planes start.
- * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
- *
- * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
- */
-void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
- unsigned int frontbuffer_bits)
-{
- struct intel_dp *intel_dp;
- struct drm_crtc *crtc;
- enum pipe pipe;
-
- if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
- return;
-
- cancel_delayed_work(&dev_priv->drrs.work);
-
- mutex_lock(&dev_priv->drrs.mutex);
-
- intel_dp = dev_priv->drrs.dp;
- if (!intel_dp) {
- mutex_unlock(&dev_priv->drrs.mutex);
- return;
- }
-
- crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
- pipe = to_intel_crtc(crtc)->pipe;
-
- frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
- dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
-
- /* invalidate means busy screen hence upclock */
- if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
- intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
- drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
-
- mutex_unlock(&dev_priv->drrs.mutex);
-}
-
-/**
- * intel_edp_drrs_flush - Restart Idleness DRRS
- * @dev_priv: i915 device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * This function gets called every time rendering on the given planes has
- * completed or flip on a crtc is completed. So DRRS should be upclocked
- * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
- * if no other planes are dirty.
- *
- * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
- */
-void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
- unsigned int frontbuffer_bits)
-{
- struct intel_dp *intel_dp;
- struct drm_crtc *crtc;
- enum pipe pipe;
-
- if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
- return;
-
- cancel_delayed_work(&dev_priv->drrs.work);
-
- mutex_lock(&dev_priv->drrs.mutex);
-
- intel_dp = dev_priv->drrs.dp;
- if (!intel_dp) {
- mutex_unlock(&dev_priv->drrs.mutex);
- return;
- }
-
- crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
- pipe = to_intel_crtc(crtc)->pipe;
-
- frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
- dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
-
- /* flush means busy screen hence upclock */
- if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
- intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
- drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
-
- /*
- * flush also means no more activity hence schedule downclock, if all
- * other fbs are quiescent too
- */
- if (!dev_priv->drrs.busy_frontbuffer_bits)
- schedule_delayed_work(&dev_priv->drrs.work,
- msecs_to_jiffies(1000));
- mutex_unlock(&dev_priv->drrs.mutex);
-}
-
-/**
- * DOC: Display Refresh Rate Switching (DRRS)
- *
- * Display Refresh Rate Switching (DRRS) is a power conservation feature
- * which enables swtching between low and high refresh rates,
- * dynamically, based on the usage scenario. This feature is applicable
- * for internal panels.
- *
- * Indication that the panel supports DRRS is given by the panel EDID, which
- * would list multiple refresh rates for one resolution.
- *
- * DRRS is of 2 types - static and seamless.
- * Static DRRS involves changing refresh rate (RR) by doing a full modeset
- * (may appear as a blink on screen) and is used in dock-undock scenario.
- * Seamless DRRS involves changing RR without any visual effect to the user
- * and can be used during normal system usage. This is done by programming
- * certain registers.
- *
- * Support for static/seamless DRRS may be indicated in the VBT based on
- * inputs from the panel spec.
- *
- * DRRS saves power by switching to low RR based on usage scenarios.
- *
- * The implementation is based on frontbuffer tracking implementation. When
- * there is a disturbance on the screen triggered by user activity or a periodic
- * system activity, DRRS is disabled (RR is changed to high RR). When there is
- * no movement on screen, after a timeout of 1 second, a switch to low RR is
- * made.
- *
- * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
- * and intel_edp_drrs_flush() are called.
- *
- * DRRS can be further extended to support other internal panels and also
- * the scenario of video playback wherein RR is set based on the rate
- * requested by userspace.
- */
-
-/**
- * intel_dp_drrs_init - Init basic DRRS work and mutex.
- * @connector: eDP connector
- * @fixed_mode: preferred mode of panel
- *
- * This function is called only once at driver load to initialize basic
- * DRRS stuff.
- *
- * Returns:
- * Downclock mode if panel supports it, else return NULL.
- * DRRS support is determined by the presence of downclock mode (apart
- * from VBT setting).
- */
-static struct drm_display_mode *
-intel_dp_drrs_init(struct intel_connector *connector,
- struct drm_display_mode *fixed_mode)
-{
- struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
- struct drm_display_mode *downclock_mode = NULL;
-
- INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
- mutex_init(&dev_priv->drrs.mutex);
-
- if (DISPLAY_VER(dev_priv) <= 6) {
- drm_dbg_kms(&dev_priv->drm,
- "DRRS supported for Gen7 and above\n");
- return NULL;
- }
-
- if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
- drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
- return NULL;
- }
-
- downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
- if (!downclock_mode) {
- drm_dbg_kms(&dev_priv->drm,
- "Downclock mode is not found. DRRS not supported\n");
- return NULL;
- }
-
- dev_priv->drrs.type = dev_priv->vbt.drrs_type;
-
- dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
- drm_dbg_kms(&dev_priv->drm,
- "seamless DRRS supported for eDP panel.\n");
- return downclock_mode;
-}
-
static bool intel_edp_init_connector(struct intel_dp *intel_dp,
struct intel_connector *intel_connector)
{
@@ -70,17 +70,6 @@ int intel_dp_max_link_rate(struct intel_dp *intel_dp);
int intel_dp_max_lane_count(struct intel_dp *intel_dp);
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
-void intel_edp_drrs_enable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state);
-void intel_edp_drrs_disable(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state);
-void intel_edp_drrs_update(struct intel_dp *intel_dp,
- const struct intel_crtc_state *crtc_state);
-void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
- unsigned int frontbuffer_bits);
-void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
- unsigned int frontbuffer_bits);
-
void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
u8 *link_bw, u8 *rate_select);
bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);
new file mode 100644
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#include "i915_drv.h"
+#include "intel_atomic.h"
+#include "intel_de.h"
+#include "intel_display_types.h"
+#include "intel_drrs.h"
+#include "intel_panel.h"
+
+/**
+ * DOC: Display Refresh Rate Switching (DRRS)
+ *
+ * Display Refresh Rate Switching (DRRS) is a power conservation feature
+ * which enables swtching between low and high refresh rates,
+ * dynamically, based on the usage scenario. This feature is applicable
+ * for internal panels.
+ *
+ * Indication that the panel supports DRRS is given by the panel EDID, which
+ * would list multiple refresh rates for one resolution.
+ *
+ * DRRS is of 2 types - static and seamless.
+ * Static DRRS involves changing refresh rate (RR) by doing a full modeset
+ * (may appear as a blink on screen) and is used in dock-undock scenario.
+ * Seamless DRRS involves changing RR without any visual effect to the user
+ * and can be used during normal system usage. This is done by programming
+ * certain registers.
+ *
+ * Support for static/seamless DRRS may be indicated in the VBT based on
+ * inputs from the panel spec.
+ *
+ * DRRS saves power by switching to low RR based on usage scenarios.
+ *
+ * The implementation is based on frontbuffer tracking implementation. When
+ * there is a disturbance on the screen triggered by user activity or a periodic
+ * system activity, DRRS is disabled (RR is changed to high RR). When there is
+ * no movement on screen, after a timeout of 1 second, a switch to low RR is
+ * made.
+ *
+ * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
+ * and intel_edp_drrs_flush() are called.
+ *
+ * DRRS can be further extended to support other internal panels and also
+ * the scenario of video playback wherein RR is set based on the rate
+ * requested by userspace.
+ */
+
+void
+intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
+ struct intel_crtc_state *pipe_config,
+ int output_bpp, bool constant_n)
+{
+ struct intel_connector *intel_connector = intel_dp->attached_connector;
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+ int pixel_clock;
+
+ if (pipe_config->vrr.enable)
+ return;
+
+ /*
+ * DRRS and PSR can't be enable together, so giving preference to PSR
+ * as it allows more power-savings by complete shutting down display,
+ * so to guarantee this, intel_dp_drrs_compute_config() must be called
+ * after intel_psr_compute_config().
+ */
+ if (pipe_config->has_psr)
+ return;
+
+ if (!intel_connector->panel.downclock_mode ||
+ dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
+ return;
+
+ pipe_config->has_drrs = true;
+
+ pixel_clock = intel_connector->panel.downclock_mode->clock;
+ if (pipe_config->splitter.enable)
+ pixel_clock /= pipe_config->splitter.link_count;
+
+ intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
+ pipe_config->port_clock, &pipe_config->dp_m2_n2,
+ constant_n, pipe_config->fec_enable);
+
+ /* FIXME: abstract this better */
+ if (pipe_config->splitter.enable)
+ pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
+}
+
+/**
+ * intel_dp_set_drrs_state - program registers for RR switch to take effect
+ * @dev_priv: i915 device
+ * @crtc_state: a pointer to the active intel_crtc_state
+ * @refresh_rate: RR to be programmed
+ *
+ * This function gets called when refresh rate (RR) has to be changed from
+ * one frequency to another. Switches can be between high and low RR
+ * supported by the panel or to any other RR based on media playback (in
+ * this case, RR value needs to be passed from user space).
+ *
+ * The caller of this function needs to take a lock on dev_priv->drrs.
+ */
+static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
+ const struct intel_crtc_state *crtc_state,
+ int refresh_rate)
+{
+ struct intel_dp *intel_dp = dev_priv->drrs.dp;
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
+
+ if (refresh_rate <= 0) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Refresh rate should be positive non-zero.\n");
+ return;
+ }
+
+ if (intel_dp == NULL) {
+ drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
+ return;
+ }
+
+ if (!crtc) {
+ drm_dbg_kms(&dev_priv->drm,
+ "DRRS: intel_crtc not initialized\n");
+ return;
+ }
+
+ if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
+ drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
+ return;
+ }
+
+ if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
+ refresh_rate)
+ index = DRRS_LOW_RR;
+
+ if (index == dev_priv->drrs.refresh_rate_type) {
+ drm_dbg_kms(&dev_priv->drm,
+ "DRRS requested for previously set RR...ignoring\n");
+ return;
+ }
+
+ if (!crtc_state->hw.active) {
+ drm_dbg_kms(&dev_priv->drm,
+ "eDP encoder disabled. CRTC not Active\n");
+ return;
+ }
+
+ if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
+ switch (index) {
+ case DRRS_HIGH_RR:
+ intel_dp_set_m_n(crtc_state, M1_N1);
+ break;
+ case DRRS_LOW_RR:
+ intel_dp_set_m_n(crtc_state, M2_N2);
+ break;
+ case DRRS_MAX_RR:
+ default:
+ drm_err(&dev_priv->drm,
+ "Unsupported refreshrate type\n");
+ }
+ } else if (DISPLAY_VER(dev_priv) > 6) {
+ i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
+ u32 val;
+
+ val = intel_de_read(dev_priv, reg);
+ if (index > DRRS_HIGH_RR) {
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
+ else
+ val |= PIPECONF_EDP_RR_MODE_SWITCH;
+ } else {
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
+ else
+ val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
+ }
+ intel_de_write(dev_priv, reg, val);
+ }
+
+ dev_priv->drrs.refresh_rate_type = index;
+
+ drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
+ refresh_rate);
+}
+
+static void
+intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ dev_priv->drrs.busy_frontbuffer_bits = 0;
+ dev_priv->drrs.dp = intel_dp;
+}
+
+/**
+ * intel_edp_drrs_enable - init drrs struct if supported
+ * @intel_dp: DP struct
+ * @crtc_state: A pointer to the active crtc state.
+ *
+ * Initializes frontbuffer_bits and drrs.dp
+ */
+void intel_edp_drrs_enable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (!crtc_state->has_drrs)
+ return;
+
+ drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
+
+ mutex_lock(&dev_priv->drrs.mutex);
+
+ if (dev_priv->drrs.dp) {
+ drm_warn(&dev_priv->drm, "DRRS already enabled\n");
+ goto unlock;
+ }
+
+ intel_edp_drrs_enable_locked(intel_dp);
+
+unlock:
+ mutex_unlock(&dev_priv->drrs.mutex);
+}
+
+static void
+intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
+ int refresh;
+
+ refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
+ intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
+ }
+
+ dev_priv->drrs.dp = NULL;
+}
+
+/**
+ * intel_edp_drrs_disable - Disable DRRS
+ * @intel_dp: DP struct
+ * @old_crtc_state: Pointer to old crtc_state.
+ *
+ */
+void intel_edp_drrs_disable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *old_crtc_state)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (!old_crtc_state->has_drrs)
+ return;
+
+ mutex_lock(&dev_priv->drrs.mutex);
+ if (!dev_priv->drrs.dp) {
+ mutex_unlock(&dev_priv->drrs.mutex);
+ return;
+ }
+
+ intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
+ mutex_unlock(&dev_priv->drrs.mutex);
+
+ cancel_delayed_work_sync(&dev_priv->drrs.work);
+}
+
+/**
+ * intel_edp_drrs_update - Update DRRS state
+ * @intel_dp: Intel DP
+ * @crtc_state: new CRTC state
+ *
+ * This function will update DRRS states, disabling or enabling DRRS when
+ * executing fastsets. For full modeset, intel_edp_drrs_disable() and
+ * intel_edp_drrs_enable() should be called instead.
+ */
+void
+intel_edp_drrs_update(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
+
+ if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
+ return;
+
+ mutex_lock(&dev_priv->drrs.mutex);
+
+ /* New state matches current one? */
+ if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
+ goto unlock;
+
+ if (crtc_state->has_drrs)
+ intel_edp_drrs_enable_locked(intel_dp);
+ else
+ intel_edp_drrs_disable_locked(intel_dp, crtc_state);
+
+unlock:
+ mutex_unlock(&dev_priv->drrs.mutex);
+}
+
+static void intel_edp_drrs_downclock_work(struct work_struct *work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(work, typeof(*dev_priv), drrs.work.work);
+ struct intel_dp *intel_dp;
+
+ mutex_lock(&dev_priv->drrs.mutex);
+
+ intel_dp = dev_priv->drrs.dp;
+
+ if (!intel_dp)
+ goto unlock;
+
+ /*
+ * The delayed work can race with an invalidate hence we need to
+ * recheck.
+ */
+
+ if (dev_priv->drrs.busy_frontbuffer_bits)
+ goto unlock;
+
+ if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
+ struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
+ }
+
+unlock:
+ mutex_unlock(&dev_priv->drrs.mutex);
+}
+
+/**
+ * intel_edp_drrs_invalidate - Disable Idleness DRRS
+ * @dev_priv: i915 device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called everytime rendering on the given planes start.
+ * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
+ *
+ * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
+ */
+void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
+ unsigned int frontbuffer_bits)
+{
+ struct intel_dp *intel_dp;
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+
+ if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
+ return;
+
+ cancel_delayed_work(&dev_priv->drrs.work);
+
+ mutex_lock(&dev_priv->drrs.mutex);
+
+ intel_dp = dev_priv->drrs.dp;
+ if (!intel_dp) {
+ mutex_unlock(&dev_priv->drrs.mutex);
+ return;
+ }
+
+ crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+ pipe = to_intel_crtc(crtc)->pipe;
+
+ frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
+ dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
+
+ /* invalidate means busy screen hence upclock */
+ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
+
+ mutex_unlock(&dev_priv->drrs.mutex);
+}
+
+/**
+ * intel_edp_drrs_flush - Restart Idleness DRRS
+ * @dev_priv: i915 device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called every time rendering on the given planes has
+ * completed or flip on a crtc is completed. So DRRS should be upclocked
+ * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
+ * if no other planes are dirty.
+ *
+ * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
+ */
+void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
+ unsigned int frontbuffer_bits)
+{
+ struct intel_dp *intel_dp;
+ struct drm_crtc *crtc;
+ enum pipe pipe;
+
+ if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
+ return;
+
+ cancel_delayed_work(&dev_priv->drrs.work);
+
+ mutex_lock(&dev_priv->drrs.mutex);
+
+ intel_dp = dev_priv->drrs.dp;
+ if (!intel_dp) {
+ mutex_unlock(&dev_priv->drrs.mutex);
+ return;
+ }
+
+ crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+ pipe = to_intel_crtc(crtc)->pipe;
+
+ frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
+ dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
+
+ /* flush means busy screen hence upclock */
+ if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
+
+ /*
+ * flush also means no more activity hence schedule downclock, if all
+ * other fbs are quiescent too
+ */
+ if (!dev_priv->drrs.busy_frontbuffer_bits)
+ schedule_delayed_work(&dev_priv->drrs.work,
+ msecs_to_jiffies(1000));
+ mutex_unlock(&dev_priv->drrs.mutex);
+}
+
+/**
+ * intel_dp_drrs_init - Init basic DRRS work and mutex.
+ * @connector: eDP connector
+ * @fixed_mode: preferred mode of panel
+ *
+ * This function is called only once at driver load to initialize basic
+ * DRRS stuff.
+ *
+ * Returns:
+ * Downclock mode if panel supports it, else return NULL.
+ * DRRS support is determined by the presence of downclock mode (apart
+ * from VBT setting).
+ */
+struct drm_display_mode *
+intel_dp_drrs_init(struct intel_connector *connector,
+ struct drm_display_mode *fixed_mode)
+{
+ struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
+ struct drm_display_mode *downclock_mode = NULL;
+
+ INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
+ mutex_init(&dev_priv->drrs.mutex);
+
+ if (DISPLAY_VER(dev_priv) <= 6) {
+ drm_dbg_kms(&dev_priv->drm,
+ "DRRS supported for Gen7 and above\n");
+ return NULL;
+ }
+
+ if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
+ drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
+ return NULL;
+ }
+
+ downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
+ if (!downclock_mode) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Downclock mode is not found. DRRS not supported\n");
+ return NULL;
+ }
+
+ dev_priv->drrs.type = dev_priv->vbt.drrs_type;
+
+ dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
+ drm_dbg_kms(&dev_priv->drm,
+ "seamless DRRS supported for eDP panel.\n");
+ return downclock_mode;
+}
new file mode 100644
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#ifndef __INTEL_DRRS_H__
+#define __INTEL_DRRS_H__
+
+#include <linux/types.h>
+
+struct drm_i915_private;
+struct intel_crtc_state;
+struct intel_connector;
+struct intel_dp;
+
+void intel_edp_drrs_enable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state);
+void intel_edp_drrs_disable(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state);
+void intel_edp_drrs_update(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state);
+void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
+ unsigned int frontbuffer_bits);
+void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
+ unsigned int frontbuffer_bits);
+void intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
+ struct intel_crtc_state *pipe_config,
+ int output_bpp, bool constant_n);
+struct drm_display_mode *intel_dp_drrs_init(struct intel_connector *connector,
+ struct drm_display_mode *fixed_mode);
+
+#endif /* __INTEL_DRRS_H__ */
@@ -62,6 +62,7 @@
#include "intel_display_types.h"
#include "intel_fbc.h"
#include "intel_frontbuffer.h"
+#include "intel_drrs.h"
#include "intel_psr.h"
/**