@@ -27,6 +27,9 @@ struct intel_qgv_info {
u8 num_points;
u8 num_psf_points;
u8 t_bl;
+ u8 max_numchannels;
+ u8 channel_width;
+ u8 deinterleave;
};
static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
@@ -69,6 +72,7 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
int point)
{
u32 val = 0, val2 = 0;
+ u16 dclk;
int ret;
ret = sandybridge_pcode_read(dev_priv,
@@ -78,7 +82,8 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
if (ret)
return ret;
- sp->dclk = val & 0xffff;
+ dclk = val & 0xffff;
+ sp->dclk = DIV_ROUND_UP((16667 * dclk) + (DISPLAY_VER(dev_priv) > 11 ? 500 : 0), 1000);
sp->t_rp = (val & 0xff0000) >> 16;
sp->t_rcd = (val & 0xff000000) >> 24;
@@ -133,7 +138,8 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
}
static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
- struct intel_qgv_info *qi)
+ struct intel_qgv_info *qi,
+ bool is_y_tile)
{
const struct dram_info *dram_info = &dev_priv->dram_info;
int i, ret;
@@ -144,17 +150,41 @@ static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
if (DISPLAY_VER(dev_priv) == 12)
switch (dram_info->type) {
case INTEL_DRAM_DDR4:
- qi->t_bl = 4;
+ qi->t_bl = is_y_tile ? 8 : 4;
+ qi->max_numchannels = 2;
+ qi->channel_width = 64;
+ qi->deinterleave = is_y_tile ? 1 : 2;
break;
case INTEL_DRAM_DDR5:
- qi->t_bl = 8;
+ qi->t_bl = is_y_tile ? 16 : 8;
+ qi->max_numchannels = 4;
+ qi->channel_width = 32;
+ qi->deinterleave = is_y_tile ? 1 : 2;
+ break;
+ case INTEL_DRAM_LPDDR4:
+ if (IS_ROCKETLAKE(dev_priv)) {
+ qi->t_bl = 8;
+ qi->max_numchannels = 4;
+ qi->channel_width = 32;
+ qi->deinterleave = 2;
+ break;
+ }
+ fallthrough;
+ case INTEL_DRAM_LPDDR5:
+ qi->t_bl = 16;
+ qi->max_numchannels = 8;
+ qi->channel_width = 16;
+ qi->deinterleave = is_y_tile ? 2 : 4;
break;
default:
qi->t_bl = 16;
+ qi->max_numchannels = 1;
break;
}
- else if (DISPLAY_VER(dev_priv) == 11)
+ else if (DISPLAY_VER(dev_priv) == 11) {
qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ? 4 : 8;
+ qi->max_numchannels = 1;
+ }
if (drm_WARN_ON(&dev_priv->drm,
qi->num_points > ARRAY_SIZE(qi->points)))
@@ -193,12 +223,6 @@ static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
return 0;
}
-static int icl_calc_bw(int dclk, int num, int den)
-{
- /* multiples of 16.666MHz (100/6) */
- return DIV_ROUND_CLOSEST(num * dclk * 100, den * 6);
-}
-
static int adl_calc_psf_bw(int clk)
{
/*
@@ -240,7 +264,7 @@ static const struct intel_sa_info tgl_sa_info = {
};
static const struct intel_sa_info rkl_sa_info = {
- .deburst = 16,
+ .deburst = 8,
.deprogbwlimit = 20, /* GB/s */
.displayrtids = 128,
.derating = 10,
@@ -263,36 +287,32 @@ static const struct intel_sa_info adlp_sa_info = {
static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa)
{
struct intel_qgv_info qi = {};
- bool is_y_tile = true; /* assume y tile may be used */
int num_channels = max_t(u8, 1, dev_priv->dram_info.num_channels);
- int deinterleave;
- int ipqdepth, ipqdepthpch;
+ int ipqdepth, ipqdepthpch = 16;
int dclk_max;
int maxdebw;
+ int num_groups = ARRAY_SIZE(dev_priv->max_bw);
int i, ret;
- ret = icl_get_qgv_points(dev_priv, &qi);
+ ret = icl_get_qgv_points(dev_priv, &qi, true);
if (ret) {
drm_dbg_kms(&dev_priv->drm,
"Failed to get memory subsystem information, ignoring bandwidth limits");
return ret;
}
- deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
dclk_max = icl_sagv_max_dclk(&qi);
- ipqdepthpch = 16;
+ maxdebw = min(sa->deprogbwlimit * 1000, dclk_max * 16 * 6 / 10);
- maxdebw = min(sa->deprogbwlimit * 1000,
- icl_calc_bw(dclk_max, 16, 1) * 6 / 10); /* 60% */
ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels);
- for (i = 0; i < ARRAY_SIZE(dev_priv->max_bw); i++) {
+ for (i = 0; i < num_groups; i++) {
struct intel_bw_info *bi = &dev_priv->max_bw[i];
int clpchgroup;
int j;
- clpchgroup = (sa->deburst * deinterleave / num_channels) << i;
+ clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i;
bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
bi->num_qgv_points = qi.num_points;
@@ -310,7 +330,106 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
*/
ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd +
(clpchgroup - 1) * qi.t_bl + sp->t_rdpre);
- bw = icl_calc_bw(sp->dclk, clpchgroup * 32 * num_channels, ct);
+ bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 * num_channels, ct);
+
+ bi->deratedbw[j] = min(maxdebw,
+ bw * (100 - sa->derating) / 100);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "BW%d / QGV %d: num_planes=%d deratedbw=%u\n",
+ i, j, bi->num_planes, bi->deratedbw[j]);
+ }
+ }
+ /*
+ * In case if SAGV is disabled in BIOS, we always get 1
+ * SAGV point, but we can't send PCode commands to restrict it
+ * as it will fail and pointless anyway.
+ */
+ if (qi.num_points == 1)
+ dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
+ else
+ dev_priv->sagv_status = I915_SAGV_ENABLED;
+
+ return 0;
+}
+
+static int tgl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa)
+{
+ struct intel_qgv_info qi = {};
+ const struct dram_info *dram_info = &dev_priv->dram_info;
+ bool is_y_tile = true; /* assume y tile may be used */
+ int num_channels = max_t(u8, 1, dev_priv->dram_info.num_channels);
+ int ipqdepth, ipqdepthpch = 16;
+ int dclk_max;
+ int maxdebw, peakbw;
+ int clperchgroup;
+ int num_groups = ARRAY_SIZE(dev_priv->max_bw);
+ int i, ret;
+
+ ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile);
+ if (ret) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Failed to get memory subsystem information, ignoring bandwidth limits");
+ return ret;
+ }
+
+ if (dram_info->type == INTEL_DRAM_LPDDR4 || dram_info->type == INTEL_DRAM_LPDDR5)
+ num_channels *= 2;
+
+ qi.deinterleave = qi.deinterleave ? : DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2);
+
+ if (num_channels < qi.max_numchannels && DISPLAY_VER(dev_priv) >= 12)
+ qi.deinterleave = max(DIV_ROUND_UP(qi.deinterleave, 2), 1);
+
+ if (DISPLAY_VER(dev_priv) > 11 && num_channels > qi.max_numchannels)
+ drm_warn(&dev_priv->drm, "Number of channels exceeds max number of channels.");
+ if (qi.max_numchannels != 0)
+ num_channels = min_t(u8, num_channels, qi.max_numchannels);
+
+ dclk_max = icl_sagv_max_dclk(&qi);
+
+ peakbw = num_channels * DIV_ROUND_UP(qi.channel_width, 8) * dclk_max;
+ maxdebw = min(sa->deprogbwlimit * 1000, peakbw * 6 / 10); /* 60% */
+
+ ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels);
+ /*
+ * clperchgroup = 4kpagespermempage * clperchperblock,
+ * clperchperblock = 8 / num_channels * interleave
+ */
+ clperchgroup = 4 * DIV_ROUND_UP(8, num_channels) * qi.deinterleave;
+
+ for (i = 0; i < num_groups; i++) {
+ struct intel_bw_info *bi = &dev_priv->max_bw[i];
+ struct intel_bw_info *bi_next;
+ int clpchgroup;
+ int j;
+
+ if (i < num_groups - 1)
+ bi_next = &dev_priv->max_bw[i + 1];
+
+ clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i;
+
+ if (i < num_groups - 1 && clpchgroup < clperchgroup)
+ bi_next->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1;
+ else
+ bi_next->num_planes = 0;
+
+ bi->num_qgv_points = qi.num_points;
+ bi->num_psf_gv_points = qi.num_psf_points;
+
+ for (j = 0; j < qi.num_points; j++) {
+ const struct intel_qgv_point *sp = &qi.points[j];
+ int ct, bw;
+
+ /*
+ * Max row cycle time
+ *
+ * FIXME what is the logic behind the
+ * assumed burst length?
+ */
+ ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd +
+ (clpchgroup - 1) * qi.t_bl + sp->t_rdpre);
+ bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 * num_channels, ct);
bi->deratedbw[j] = min(maxdebw,
bw * (100 - sa->derating) / 100);
@@ -329,9 +448,6 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
"BW%d / PSF GV %d: num_planes=%d bw=%u\n",
i, j, bi->num_planes, bi->psf_bw[j]);
}
-
- if (bi->num_planes == 1)
- break;
}
/*
@@ -388,13 +504,41 @@ static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
if (qgv_point >= bi->num_qgv_points)
return UINT_MAX;
- if (num_planes >= bi->num_planes)
+ if (num_planes > bi->num_planes)
return bi->deratedbw[qgv_point];
}
return 0;
}
+static unsigned int tgl_max_bw(struct drm_i915_private *dev_priv,
+ int num_planes, int qgv_point)
+{
+ int i;
+
+ /*
+ * Let's return max bw for 0 planes
+ */
+ num_planes = max(1, num_planes);
+
+ for (i = ARRAY_SIZE(dev_priv->max_bw) - 1; i >= 0; i--) {
+ const struct intel_bw_info *bi =
+ &dev_priv->max_bw[i];
+
+ /*
+ * Pcode will not expose all QGV points when
+ * SAGV is forced to off/min/med/max.
+ */
+ if (qgv_point >= bi->num_qgv_points)
+ return UINT_MAX;
+
+ if (num_planes <= bi->num_planes)
+ return bi->deratedbw[qgv_point];
+ }
+
+ return dev_priv->max_bw[0].deratedbw[qgv_point];
+}
+
static unsigned int adl_psf_bw(struct drm_i915_private *dev_priv,
int psf_gv_point)
{
@@ -412,13 +556,13 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
if (IS_DG2(dev_priv))
dg2_get_bw_info(dev_priv);
else if (IS_ALDERLAKE_P(dev_priv))
- icl_get_bw_info(dev_priv, &adlp_sa_info);
+ tgl_get_bw_info(dev_priv, &adlp_sa_info);
else if (IS_ALDERLAKE_S(dev_priv))
- icl_get_bw_info(dev_priv, &adls_sa_info);
+ tgl_get_bw_info(dev_priv, &adls_sa_info);
else if (IS_ROCKETLAKE(dev_priv))
- icl_get_bw_info(dev_priv, &rkl_sa_info);
+ tgl_get_bw_info(dev_priv, &rkl_sa_info);
else if (DISPLAY_VER(dev_priv) == 12)
- icl_get_bw_info(dev_priv, &tgl_sa_info);
+ tgl_get_bw_info(dev_priv, &tgl_sa_info);
else if (DISPLAY_VER(dev_priv) == 11)
icl_get_bw_info(dev_priv, &icl_sa_info);
}
@@ -746,7 +890,10 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
for (i = 0; i < num_qgv_points; i++) {
unsigned int max_data_rate;
- max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+ if (DISPLAY_VER(dev_priv) > 11)
+ max_data_rate = tgl_max_bw(dev_priv, num_active_planes, i);
+ else
+ max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
/*
* We need to know which qgv point gives us
* maximum bandwidth in order to disable SAGV
The formulae has been updated to include more variables. Make sure the code carries the same. Bspec: 64631 v2: Make GEN11 follow the default route and fix calculation of maxdebw(RK) v3: Fix div by zero on default case Correct indent for fallthrough(Jani) v4: Fix div by zero on gen11. v5: Fix 0 max_numchannels case v6: - Split gen11/gen12 algorithms - Fix RKL deburst value - Fix difference b/ween ICL and TGL algorithms - Protect deinterleave from being 0 - Warn when numchannels exceeds max_numchannels - Fix scaling of clk_max from different units - s/deinterleave/channelwidth/ in calculating peakbw - Fix off by one for num_planes TGL+ - Fix SAGV check Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> --- drivers/gpu/drm/i915/display/intel_bw.c | 211 ++++++++++++++++++++---- 1 file changed, 179 insertions(+), 32 deletions(-)