@@ -652,6 +652,8 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
if (ret)
goto err_msi;
+ intel_pm_vram_sr_setup(dev_priv);
+
/*
* Fill the dram structure to get the system dram info. This will be
* used for memory latency calculation.
@@ -624,6 +624,8 @@ struct drm_i915_private {
u32 bxt_phy_grc;
u32 suspend_count;
+ bool vram_sr_supported;
+
struct i915_suspend_saved_registers regfile;
struct vlv_s0ix_state *vlv_s0ix_state;
@@ -6766,6 +6766,8 @@
#define DG1_PCODE_STATUS 0x7E
#define DG1_UNCORE_GET_INIT_STATUS 0x0
#define DG1_UNCORE_INIT_STATUS_COMPLETE 0x1
+#define DG1_PCODE_D3_VRAM_SR 0x71
+#define DG1_ENABLE_SR 0x1
#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23
#define XEHPSDV_PCODE_FREQUENCY_CONFIG 0x6e /* xehpsdv, pvc */
/* XEHPSDV_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
@@ -6779,6 +6781,8 @@
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
#define GEN6_PCODE_DATA1 _MMIO(0x13812C)
+#define VRAM_CAPABILITY _MMIO(0x138144)
+#define VRAM_SUPPORTED REG_BIT(0)
/* IVYBRIDGE DPF */
#define GEN7_L3CDERRST1(slice) _MMIO(0xB008 + (slice) * 0x200) /* L3CD Error Status 1 */
@@ -9,6 +9,7 @@
#include <linux/types.h>
struct intel_uncore;
+struct drm_i915_private;
int snb_pcode_read(struct intel_uncore *uncore, u32 mbox, u32 *val, u32 *val1);
int snb_pcode_write_timeout(struct intel_uncore *uncore, u32 mbox, u32 val,
@@ -8287,6 +8287,51 @@ void intel_pm_setup(struct drm_i915_private *dev_priv)
atomic_set(&dev_priv->runtime_pm.wakeref_count, 0);
}
+void intel_pm_vram_sr_setup(struct drm_i915_private *i915)
+{
+ if (!HAS_LMEM_SR(i915))
+ return;
+
+ i915->vram_sr_supported = intel_uncore_read(&i915->uncore,
+ VRAM_CAPABILITY) & VRAM_SUPPORTED;
+ if (intel_opregion_vram_sr_required(i915))
+ i915->vram_sr_supported = i915->vram_sr_supported &&
+ intel_opregion_bios_supports_vram_sr(i915);
+ drm_dbg(&i915->drm, "VRAM Self Refresh supported:%s\n",
+ str_yes_no(i915->vram_sr_supported));
+}
+
+int intel_pcode_enable_vram_sr(struct drm_i915_private *i915)
+{
+ int ret = 0;
+
+ ret = snb_pcode_write(&i915->uncore,
+ REG_FIELD_PREP(GEN6_PCODE_MB_COMMAND,
+ DG1_PCODE_D3_VRAM_SR) |
+ REG_FIELD_PREP(GEN6_PCODE_MB_PARAM1,
+ DG1_ENABLE_SR), 0); /* no data needed for this cmd */
+
+ return ret;
+}
+
+int intel_pm_vram_sr(struct drm_i915_private *i915, bool enable)
+{
+ int ret = 0;
+
+ if (!i915->vram_sr_supported)
+ return ret;
+
+ if (enable)
+ ret = intel_pcode_enable_vram_sr(i915);
+
+ if (ret)
+ return ret;
+
+ intel_opregion_vram_sr(i915, enable);
+
+ return ret;
+}
+
static struct intel_global_state *intel_dbuf_duplicate_state(struct intel_global_obj *obj)
{
struct intel_dbuf_state *dbuf_state;
@@ -31,6 +31,8 @@ int ilk_wm_max_level(const struct drm_i915_private *dev_priv);
void intel_init_pm(struct drm_i915_private *dev_priv);
void intel_init_clock_gating_hooks(struct drm_i915_private *dev_priv);
void intel_pm_setup(struct drm_i915_private *dev_priv);
+void intel_pm_vram_sr_setup(struct drm_i915_private *i915);
+int intel_pm_vram_sr(struct drm_i915_private *i915, bool enable);
void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv);
void vlv_wm_get_hw_state(struct drm_i915_private *dev_priv);
void ilk_wm_get_hw_state(struct drm_i915_private *dev_priv);
Setup VRAM Self Refresh with D3COLD state. VRAM Self Refresh will retain the context of VRAM, driver need to save any corresponding hardware state that needs to be restore on D3COLD exit. v2: - Moved intel_pcode_enable_vram_sr to intel_pm.c. [Jani] - Removed vram_sr.lock. [Jani] - Dropped Redundant !HAS_LMEM_SR(i915). [Jani] Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> --- drivers/gpu/drm/i915/i915_driver.c | 2 ++ drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_reg.h | 4 +++ drivers/gpu/drm/i915/intel_pcode.h | 1 + drivers/gpu/drm/i915/intel_pm.c | 45 ++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_pm.h | 2 ++ 6 files changed, 56 insertions(+)