@@ -279,6 +279,7 @@ i915-y += \
display/icl_dsi.o \
display/intel_backlight.o \
display/intel_crt.o \
+ display/intel_cx0_phy.o \
display/intel_ddi.o \
display/intel_ddi_buf_trans.o \
display/intel_display_trace.o \
new file mode 100644
@@ -0,0 +1,1090 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#include "i915_reg_defs.h"
+#include "intel_cx0_phy.h"
+#include "intel_cx0_reg_defs.h"
+#include "intel_de.h"
+#include "intel_display_types.h"
+#include "intel_dp.h"
+#include "intel_panel.h"
+
+bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy)
+{
+ if (IS_METEORLAKE(dev_priv) && (phy < PHY_C))
+ return true;
+
+ return false;
+}
+
+static void intel_cx0_bus_reset(struct drm_i915_private *i915, enum port port, int lane)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+
+ /* Bring the phy to idle. */
+ intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_RESET);
+
+ /* Wait for Idle Clear. */
+ if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_RESET,
+ XELPDP_MSGBUS_TIMEOUT_SLOW)) {
+ drm_err_once(&i915->drm, "Failed to bring PHY %c to idle.\n", phy_name(phy));
+ return;
+ }
+
+ intel_de_write(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane), ~0);
+}
+
+static int intel_cx0_wait_for_ack(struct drm_i915_private *i915, enum port port, int lane, u32 *val)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+
+ if (__intel_wait_for_register(&i915->uncore,
+ XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane),
+ XELPDP_PORT_P2M_RESPONSE_READY,
+ XELPDP_PORT_P2M_RESPONSE_READY,
+ XELPDP_MSGBUS_TIMEOUT_FAST_US,
+ XELPDP_MSGBUS_TIMEOUT_SLOW, val)) {
+ drm_dbg_kms(&i915->drm, "PHY %c Timeout waiting for message ACK. Status: 0x%x\n", phy_name(phy), *val);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int __intel_cx0_read(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u32 *val)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ int ack;
+
+ /* Wait for pending transactions.*/
+ if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_PENDING,
+ XELPDP_MSGBUS_TIMEOUT_SLOW)) {
+ drm_dbg_kms(&i915->drm, "PHY %c Timeout waiting for previous transaction to complete. Reset the bus and retry.\n", phy_name(phy));
+ intel_cx0_bus_reset(i915, port, lane);
+ return -ETIMEDOUT;
+ }
+
+ /* Issue the read command. */
+ intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_PENDING |
+ XELPDP_PORT_M2P_COMMAND_READ |
+ XELPDP_PORT_M2P_ADDRESS(addr));
+
+ /* Wait for response ready. And read response.*/
+ ack = intel_cx0_wait_for_ack(i915, port, lane, val);
+ if (ack < 0) {
+ intel_cx0_bus_reset(i915, port, lane);
+ return ack;
+ }
+
+ /* Check for error. */
+ if (*val & XELPDP_PORT_P2M_ERROR_SET) {
+ drm_dbg_kms(&i915->drm, "PHY %c Error occurred during read command. Status: 0x%x\n", phy_name(phy), *val);
+ intel_cx0_bus_reset(i915, port, lane);
+ return -EINVAL;
+ }
+
+ /* Check for Read Ack. */
+ if (REG_FIELD_GET(XELPDP_PORT_P2M_COMMAND_TYPE_MASK, *val) !=
+ XELPDP_PORT_P2M_COMMAND_READ_ACK) {
+ drm_dbg_kms(&i915->drm, "PHY %c Not a Read response. MSGBUS Status: 0x%x.\n", phy_name(phy), *val);
+ intel_cx0_bus_reset(i915, port, lane);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static u8 intel_cx0_read(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ int i, status;
+ u32 val;
+
+ for (i = 0; i < 3; i++) {
+ status = __intel_cx0_read(i915, port, lane, addr, &val);
+
+ if (status == 0)
+ break;
+ }
+
+ if (i == 3) {
+ drm_err_once(&i915->drm, "PHY %c Read %04x failed after %d retries.\n", phy_name(phy), addr, i);
+ return 0;
+ }
+
+ /* Clear Response Ready flag.*/
+ intel_de_write(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane), ~0);
+
+ return REG_FIELD_GET(XELPDP_PORT_P2M_DATA_MASK, val);
+}
+
+static int intel_cx0_wait_cwrite_ack(struct drm_i915_private *i915,
+ enum port port, int lane)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ int ack;
+ u32 val = 0;
+
+ /* Check for write ack. */
+ ack = intel_cx0_wait_for_ack(i915, port, lane, &val);
+ if (ack < 0)
+ return ack;
+
+ if ((REG_FIELD_GET(XELPDP_PORT_P2M_COMMAND_TYPE_MASK, val) !=
+ XELPDP_PORT_P2M_COMMAND_WRITE_ACK) || val & XELPDP_PORT_P2M_ERROR_SET) {
+ drm_dbg_kms(&i915->drm, "PHY %c Unexpected ACK received. MSGBUS STATUS: 0x%x.\n", phy_name(phy), val);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __intel_cx0_write_once(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u8 data, bool committed)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+
+ /* Wait for pending transactions.*/
+ if (intel_de_wait_for_clear(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_PENDING,
+ XELPDP_MSGBUS_TIMEOUT_SLOW)) {
+ drm_dbg_kms(&i915->drm, "PHY %c Timeout waiting for previous transaction to complete. Reset the bus and retry.\n", phy_name(phy));
+ intel_cx0_bus_reset(i915, port, lane);
+ return -ETIMEDOUT;
+ }
+
+ /* Issue the write command. */
+ intel_de_write(i915, XELPDP_PORT_M2P_MSGBUS_CTL(port, lane),
+ XELPDP_PORT_M2P_TRANSACTION_PENDING |
+ (committed ? XELPDP_PORT_M2P_COMMAND_WRITE_COMMITTED :
+ XELPDP_PORT_M2P_COMMAND_WRITE_UNCOMMITTED) |
+ XELPDP_PORT_M2P_DATA(data) |
+ XELPDP_PORT_M2P_ADDRESS(addr));
+
+ /* Check for error. */
+ if (committed) {
+ if (intel_cx0_wait_cwrite_ack(i915, port, lane) < 0) {
+ intel_cx0_bus_reset(i915, port, lane);
+ return -EINVAL;
+ }
+ } else if ((intel_de_read(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane)) &
+ XELPDP_PORT_P2M_ERROR_SET)) {
+ drm_dbg_kms(&i915->drm, "PHY %c Error occurred during write command.\n", phy_name(phy));
+ intel_cx0_bus_reset(i915, port, lane);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __intel_cx0_write(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u8 data, bool committed)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ int i, status;
+
+ for (i = 0; i < 3; i++) {
+ status = __intel_cx0_write_once(i915, port, lane, addr, data, committed);
+
+ if (status == 0)
+ break;
+ }
+
+ if (i == 3) {
+ drm_err_once(&i915->drm, "PHY %c Write %04x failed after %d retries.\n", phy_name(phy), addr, i);
+ return;
+ }
+
+ intel_de_write(i915, XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane), ~0);
+}
+
+static void intel_cx0_write(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u8 data, bool committed)
+{
+ if (lane == INTEL_CX0_BOTH_LANES) {
+ __intel_cx0_write(i915, port, INTEL_CX0_LANE0, addr, data, committed);
+ __intel_cx0_write(i915, port, INTEL_CX0_LANE1, addr, data, committed);
+ } else {
+ __intel_cx0_write(i915, port, lane, addr, data, committed);
+ }
+}
+
+static void __intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u8 clear, u8 set, bool committed)
+{
+ u8 old, val;
+
+ old = intel_cx0_read(i915, port, lane, addr);
+ val = (old & ~clear) | set;
+
+ if (val != old)
+ intel_cx0_write(i915, port, lane, addr, val, committed);
+}
+
+static void intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u8 clear, u8 set, bool committed)
+{
+ if (lane == INTEL_CX0_BOTH_LANES) {
+ __intel_cx0_rmw(i915, port, INTEL_CX0_LANE0, addr, clear, set, committed);
+ __intel_cx0_rmw(i915, port, INTEL_CX0_LANE1, addr, clear, set, committed);
+ } else {
+ __intel_cx0_rmw(i915, port, lane, addr, clear, set, committed);
+ }
+}
+
+/*
+ * Basic DP link rates with 38.4 MHz reference clock.
+ * Note: The tables below are with SSC. In non-ssc
+ * registers 0xC04 to 0xC08(pll[4] to pll[8]) will be
+ * programmed 0.
+ */
+
+static const struct intel_c10mpllb_state mtl_c10_dp_rbr = {
+ .clock = 162000,
+ .pll[0] = 0xB4,
+ .pll[1] = 0,
+ .pll[2] = 0x30,
+ .pll[3] = 0x1,
+ .pll[4] = 0x26,
+ .pll[5] = 0x0C,
+ .pll[6] = 0x98,
+ .pll[7] = 0x46,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xC0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x2,
+ .pll[16] = 0x84,
+ .pll[17] = 0x4F,
+ .pll[18] = 0xE5,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_edp_r216 = {
+ .clock = 216000,
+ .pll[0] = 0x4,
+ .pll[1] = 0,
+ .pll[2] = 0xA2,
+ .pll[3] = 0x1,
+ .pll[4] = 0x33,
+ .pll[5] = 0x10,
+ .pll[6] = 0x75,
+ .pll[7] = 0xB3,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x2,
+ .pll[16] = 0x85,
+ .pll[17] = 0x0F,
+ .pll[18] = 0xE6,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_edp_r243 = {
+ .clock = 243000,
+ .pll[0] = 0x34,
+ .pll[1] = 0,
+ .pll[2] = 0xDA,
+ .pll[3] = 0x1,
+ .pll[4] = 0x39,
+ .pll[5] = 0x12,
+ .pll[6] = 0xE3,
+ .pll[7] = 0xE9,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0x20,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x2,
+ .pll[16] = 0x85,
+ .pll[17] = 0x8F,
+ .pll[18] = 0xE6,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_dp_hbr1 = {
+ .clock = 270000,
+ .pll[0] = 0xF4,
+ .pll[1] = 0,
+ .pll[2] = 0xF8,
+ .pll[3] = 0x0,
+ .pll[4] = 0x20,
+ .pll[5] = 0x0A,
+ .pll[6] = 0x29,
+ .pll[7] = 0x10,
+ .pll[8] = 0x1, /* Verify */
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xA0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x1,
+ .pll[16] = 0x84,
+ .pll[17] = 0x4F,
+ .pll[18] = 0xE5,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_edp_r324 = {
+ .clock = 324000,
+ .pll[0] = 0xB4,
+ .pll[1] = 0,
+ .pll[2] = 0x30,
+ .pll[3] = 0x1,
+ .pll[4] = 0x26,
+ .pll[5] = 0x0C,
+ .pll[6] = 0x98,
+ .pll[7] = 0x46,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xC0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x1,
+ .pll[16] = 0x85,
+ .pll[17] = 0x4F,
+ .pll[18] = 0xE6,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_edp_r432 = {
+ .clock = 432000,
+ .pll[0] = 0x4,
+ .pll[1] = 0,
+ .pll[2] = 0xA2,
+ .pll[3] = 0x1,
+ .pll[4] = 0x33,
+ .pll[5] = 0x10,
+ .pll[6] = 0x75,
+ .pll[7] = 0xB3,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0x1,
+ .pll[16] = 0x85,
+ .pll[17] = 0x0F,
+ .pll[18] = 0xE6,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_dp_hbr2 = {
+ .clock = 540000,
+ .pll[0] = 0xF4,
+ .pll[1] = 0,
+ .pll[2] = 0xF8,
+ .pll[3] = 0,
+ .pll[4] = 0x20,
+ .pll[5] = 0x0A,
+ .pll[6] = 0x29,
+ .pll[7] = 0x10,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xA0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0,
+ .pll[16] = 0x84,
+ .pll[17] = 0x4F,
+ .pll[18] = 0xE5,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_edp_r675 = {
+ .clock = 675000,
+ .pll[0] = 0xB4,
+ .pll[1] = 0,
+ .pll[2] = 0x3E,
+ .pll[3] = 0x1,
+ .pll[4] = 0xA8,
+ .pll[5] = 0x0C,
+ .pll[6] = 0x33,
+ .pll[7] = 0x54,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xC8,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0,
+ .pll[16] = 0x85,
+ .pll[17] = 0x8F,
+ .pll[18] = 0xE6,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state mtl_c10_dp_hbr3 = {
+ .clock = 810000,
+ .pll[0] = 0x34,
+ .pll[1] = 0,
+ .pll[2] = 0x84,
+ .pll[3] = 0x1,
+ .pll[4] = 0x30,
+ .pll[5] = 0x0F,
+ .pll[6] = 0x3D,
+ .pll[7] = 0x98,
+ .pll[8] = 0x1,
+ .pll[9] = 0x1,
+ .pll[10] = 0,
+ .pll[11] = 0,
+ .pll[12] = 0xF0,
+ .pll[13] = 0,
+ .pll[14] = 0,
+ .pll[15] = 0,
+ .pll[16] = 0x84,
+ .pll[17] = 0x0F,
+ .pll[18] = 0xE5,
+ .pll[19] = 0x23,
+};
+
+static const struct intel_c10mpllb_state * const mtl_c10_dp_tables[] = {
+ &mtl_c10_dp_rbr,
+ &mtl_c10_dp_hbr1,
+ &mtl_c10_dp_hbr2,
+ &mtl_c10_dp_hbr3,
+ NULL,
+};
+
+static const struct intel_c10mpllb_state * const mtl_c10_edp_tables[] = {
+ &mtl_c10_dp_rbr,
+ &mtl_c10_edp_r216,
+ &mtl_c10_edp_r243,
+ &mtl_c10_dp_hbr1,
+ &mtl_c10_edp_r324,
+ &mtl_c10_edp_r432,
+ &mtl_c10_dp_hbr2,
+ &mtl_c10_edp_r675,
+ &mtl_c10_dp_hbr3,
+ NULL,
+};
+
+static const struct intel_c10mpllb_state * const *
+intel_c10_mpllb_tables_get(struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ if (intel_crtc_has_dp_encoder(crtc_state)) {
+ if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
+ return mtl_c10_edp_tables;
+ else
+ return mtl_c10_dp_tables;
+ }
+
+ /* TODO: Add HDMI Support */
+ MISSING_CASE(encoder->type);
+ return NULL;
+}
+
+static int intel_c10mpllb_calc_state(struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ const struct intel_c10mpllb_state * const *tables;
+ int i;
+
+ tables = intel_c10_mpllb_tables_get(crtc_state, encoder);
+ if (!tables)
+ return -EINVAL;
+
+ for (i = 0; tables[i]; i++) {
+ if (crtc_state->port_clock <= tables[i]->clock) {
+ crtc_state->c10mpllb_state = *tables[i];
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+int intel_cx0mpllb_calc_state(struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+
+ return intel_c10mpllb_calc_state(crtc_state, encoder);
+}
+
+void intel_c10mpllb_readout_hw_state(struct intel_encoder *encoder,
+ struct intel_c10mpllb_state *pll_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ u8 lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+ int i;
+ u8 cmn, tx0;
+
+ /*
+ * According to C10 VDR Register programming Sequence we need
+ * to do this to read PHY internal registers from MsgBus.
+ */
+ intel_cx0_rmw(i915, encoder->port, lane, PHY_C10_VDR_CONTROL(1), 0,
+ C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
+
+ for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++)
+ pll_state->pll[i] = intel_cx0_read(i915, encoder->port, lane,
+ PHY_C10_VDR_PLL(i));
+
+ cmn = intel_cx0_read(i915, encoder->port, lane, PHY_C10_VDR_CMN(0));
+ tx0 = intel_cx0_read(i915, encoder->port, lane, PHY_C10_VDR_TX(0));
+
+ if (tx0 != C10_TX0_VAL || cmn != C10_CMN0_DP_VAL)
+ drm_warn(&i915->drm, "Unexpected tx: %x or cmn: %x for phy: %c.\n",
+ tx0, cmn, phy_name(phy));
+}
+
+static void intel_c10_pll_program(struct drm_i915_private *i915,
+ const struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ const struct intel_c10mpllb_state *pll_state = &crtc_state->c10mpllb_state;
+ struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ u8 master_lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+ u8 follower_lane = lane_reversal ? INTEL_CX0_LANE0 :
+ INTEL_CX0_LANE1;
+
+ int i;
+ struct intel_dp *intel_dp;
+ bool use_ssc = false;
+ u8 cmn0 = 0;
+
+ if (intel_crtc_has_dp_encoder(crtc_state)) {
+ intel_dp = enc_to_intel_dp(encoder);
+ use_ssc = (intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+ DP_MAX_DOWNSPREAD_0_5);
+
+ if (intel_dp_is_edp(intel_dp) && !intel_panel_use_ssc(i915))
+ use_ssc = false;
+
+ cmn0 = C10_CMN0_DP_VAL;
+ }
+
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
+ /* Custom width needs to be programmed to 0 for both the phy lanes */
+ intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES,
+ PHY_C10_VDR_CUSTOM_WIDTH, 0x3, 0, MB_WRITE_COMMITTED);
+ intel_cx0_rmw(i915, encoder->port, follower_lane, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_MASTER_LANE, C10_VDR_CTRL_UPDATE_CFG,
+ MB_WRITE_COMMITTED);
+
+ /* Program the pll values only for the master lane */
+ for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++)
+ /* If not using ssc pll[4] through pll[8] must be 0*/
+ intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_PLL(i),
+ (!use_ssc && (i > 3 && i < 9)) ? 0 : pll_state->pll[i],
+ (i % 4) ? MB_WRITE_UNCOMMITTED : MB_WRITE_COMMITTED);
+
+ intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_CMN(0), cmn0, MB_WRITE_COMMITTED);
+ intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_TX(0), C10_TX0_VAL, MB_WRITE_COMMITTED);
+ intel_cx0_rmw(i915, encoder->port, master_lane, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_MSGBUS_ACCESS, C10_VDR_CTRL_MASTER_LANE |
+ C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
+}
+
+void intel_c10mpllb_dump_hw_state(struct drm_i915_private *dev_priv,
+ const struct intel_c10mpllb_state *hw_state)
+{
+ bool fracen;
+ int i;
+ unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1;
+ unsigned int multiplier, tx_clk_div;
+
+ fracen = hw_state->pll[0] & C10_PLL0_FRACEN;
+ drm_dbg_kms(&dev_priv->drm, "c10pll_hw_state: fracen: %s, ",
+ str_yes_no(fracen));
+
+ if (fracen) {
+ frac_quot = hw_state->pll[12] << 8 | hw_state->pll[11];
+ frac_rem = hw_state->pll[14] << 8 | hw_state->pll[13];
+ frac_den = hw_state->pll[10] << 8 | hw_state->pll[9];
+ drm_dbg_kms(&dev_priv->drm, "quot: %u, rem: %u, den: %u,\n",
+ frac_quot, frac_rem, frac_den);
+ }
+
+ multiplier = (REG_FIELD_GET8(C10_PLL3_MULTIPLIERH_MASK, hw_state->pll[3]) << 8 |
+ hw_state->pll[2]) / 2 + 16;
+ tx_clk_div = REG_FIELD_GET8(C10_PLL15_TXCLKDIV_MASK, hw_state->pll[15]);
+ drm_dbg_kms(&dev_priv->drm,
+ "multiplier: %u, tx_clk_div: %u.\n", multiplier, tx_clk_div);
+
+ drm_dbg_kms(&dev_priv->drm, "c10pll_rawhw_state:");
+
+ for (i = 0; i < ARRAY_SIZE(hw_state->pll); i = i + 4)
+ drm_dbg_kms(&dev_priv->drm, "pll[%d] = 0x%x, pll[%d] = 0x%x, pll[%d] = 0x%x, pll[%d] = 0x%x\n",
+ i, hw_state->pll[i], i + 1, hw_state->pll[i + 1],
+ i + 2, hw_state->pll[i + 2], i + 3, hw_state->pll[i + 3]);
+}
+
+int intel_c10mpllb_calc_port_clock(struct intel_encoder *encoder,
+ const struct intel_c10mpllb_state *pll_state)
+{
+ unsigned int frac_quot = 0, frac_rem = 0, frac_den = 1;
+ unsigned int multiplier, tx_clk_div, refclk = 38400;
+
+ if (pll_state->pll[0] & C10_PLL0_FRACEN) {
+ frac_quot = pll_state->pll[12] << 8 | pll_state->pll[11];
+ frac_rem = pll_state->pll[14] << 8 | pll_state->pll[13];
+ frac_den = pll_state->pll[10] << 8 | pll_state->pll[9];
+ }
+
+ multiplier = (REG_FIELD_GET8(C10_PLL3_MULTIPLIERH_MASK, pll_state->pll[3]) << 8 |
+ pll_state->pll[2]) / 2 + 16;
+
+ tx_clk_div = REG_FIELD_GET8(C10_PLL15_TXCLKDIV_MASK, pll_state->pll[15]);
+
+ return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, (multiplier << 16) + frac_quot) +
+ DIV_ROUND_CLOSEST(refclk * frac_rem, frac_den),
+ 10 << (tx_clk_div + 16));
+}
+
+static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state,
+ bool lane_reversal)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ struct intel_dp *intel_dp;
+ bool ssc_enabled;
+ u32 val = 0;
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL1(encoder->port), XELPDP_PORT_REVERSAL,
+ lane_reversal ? XELPDP_PORT_REVERSAL : 0);
+
+ if (lane_reversal)
+ val |= XELPDP_LANE1_PHY_CLOCK_SELECT;
+
+ val |= XELPDP_FORWARD_CLOCK_UNGATE;
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
+
+ if (intel_crtc_has_dp_encoder(crtc_state)) {
+ intel_dp = enc_to_intel_dp(encoder);
+ ssc_enabled = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+ DP_MAX_DOWNSPREAD_0_5;
+
+ /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
+ val |= ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
+ }
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ XELPDP_LANE1_PHY_CLOCK_SELECT |
+ XELPDP_FORWARD_CLOCK_UNGATE |
+ XELPDP_DDI_CLOCK_SELECT_MASK |
+ XELPDP_SSC_ENABLE_PLLB, val);
+}
+
+static u32 intel_cx0_get_powerdown_update(u8 lane)
+{
+ if (lane & INTEL_CX0_LANE0)
+ return XELPDP_LANE0_POWERDOWN_UPDATE;
+ else if (lane & INTEL_CX0_LANE1)
+ return XELPDP_LANE1_POWERDOWN_UPDATE;
+ else
+ return XELPDP_LANE0_POWERDOWN_UPDATE |
+ XELPDP_LANE1_POWERDOWN_UPDATE;
+}
+
+static void intel_cx0_powerdown_change_sequence(struct drm_i915_private *i915,
+ enum port port,
+ u8 lane, u8 state)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_POWERDOWN_NEW_STATE_MASK | XELPDP_LANE1_POWERDOWN_NEW_STATE_MASK,
+ XELPDP_LANE0_POWERDOWN_NEW_STATE(state) | XELPDP_LANE1_POWERDOWN_NEW_STATE(state));
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_POWERDOWN_UPDATE | XELPDP_LANE1_POWERDOWN_UPDATE,
+ intel_cx0_get_powerdown_update(lane));
+
+ /* Update Timeout Value */
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL2(port),
+ intel_cx0_get_powerdown_update(lane), 0,
+ XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dus.\n",
+ phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US);
+}
+
+static void intel_cx0_setup_powerdown(struct drm_i915_private *i915, enum port port)
+{
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_POWER_STATE_READY_MASK,
+ XELPDP_POWER_STATE_READY(CX0_P2_STATE_READY));
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL3(port),
+ XELPDP_POWER_STATE_ACTIVE_MASK |
+ XELPDP_PLL_LANE_STAGGERING_DELAY_MASK,
+ XELPDP_POWER_STATE_ACTIVE(CX0_P0_STATE_ACTIVE) |
+ XELPDP_PLL_LANE_STAGGERING_DELAY(0));
+}
+
+static u32 intel_cx0_get_pclk_refclk_request(u8 lane)
+{
+ if (lane & INTEL_CX0_LANE0)
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST;
+ else if (lane & INTEL_CX0_LANE1)
+ return XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+ else
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST |
+ XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+}
+
+static u32 intel_cx0_get_pclk_refclk_ack(u8 lane)
+{
+ if (lane & INTEL_CX0_LANE0)
+ return XELPDP_LANE0_PCLK_REFCLK_ACK;
+ else if (lane & INTEL_CX0_LANE1)
+ return XELPDP_LANE1_PCLK_REFCLK_ACK;
+ else
+ return XELPDP_LANE0_PCLK_REFCLK_ACK |
+ XELPDP_LANE1_PCLK_REFCLK_ACK;
+}
+
+/* FIXME: Some Type-C cases need not reset both the lanes. Handle those cases. */
+static void intel_cx0_phy_lane_reset(struct drm_i915_private *i915, enum port port,
+ bool lane_reversal)
+{
+ enum phy phy = intel_port_to_phy(i915, port);
+ u8 lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL1(port),
+ XELPDP_PORT_BUF_SOC_PHY_READY,
+ XELPDP_PORT_BUF_SOC_PHY_READY,
+ XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of SOC reset after %dus.\n",
+ phy_name(phy), XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_PIPE_RESET | XELPDP_LANE1_PIPE_RESET,
+ XELPDP_LANE0_PIPE_RESET | XELPDP_LANE1_PIPE_RESET);
+
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_PHY_CURRENT_STATUS | XELPDP_LANE1_PHY_CURRENT_STATUS,
+ XELPDP_LANE0_PHY_CURRENT_STATUS | XELPDP_LANE1_PHY_CURRENT_STATUS,
+ XELPDP_PORT_RESET_START_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dus.\n",
+ phy_name(phy), XELPDP_PORT_RESET_START_TIMEOUT_US);
+
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(port),
+ intel_cx0_get_pclk_refclk_request(INTEL_CX0_BOTH_LANES),
+ intel_cx0_get_pclk_refclk_request(lane));
+
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_CLOCK_CTL(port),
+ intel_cx0_get_pclk_refclk_ack(INTEL_CX0_BOTH_LANES),
+ intel_cx0_get_pclk_refclk_ack(lane),
+ XELPDP_REFCLK_ENABLE_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "PHY %c failed to request refclk after %dus.\n",
+ phy_name(phy), XELPDP_REFCLK_ENABLE_TIMEOUT_US);
+
+ intel_cx0_powerdown_change_sequence(i915, port, INTEL_CX0_BOTH_LANES,
+ CX0_P2_STATE_RESET);
+ intel_cx0_setup_powerdown(i915, port);
+
+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_PIPE_RESET | XELPDP_LANE1_PIPE_RESET, 0);
+
+ if (intel_de_wait_for_clear(i915, XELPDP_PORT_BUF_CTL2(port),
+ XELPDP_LANE0_PHY_CURRENT_STATUS |
+ XELPDP_LANE1_PHY_CURRENT_STATUS,
+ XELPDP_PORT_RESET_END_TIMEOUT))
+ drm_warn(&i915->drm, "PHY %c failed to bring out of Lane reset after %dms.\n",
+ phy_name(phy), XELPDP_PORT_RESET_END_TIMEOUT);
+}
+
+static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
+ enum port port, int lane_count,
+ bool lane_reversal)
+{
+ u8 l0t1, l0t2, l1t1, l1t2;
+
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_MSGBUS_ACCESS, C10_VDR_CTRL_MSGBUS_ACCESS,
+ MB_WRITE_COMMITTED);
+
+ l0t1 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(1, 2));
+ l0t2 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2));
+ l1t1 = intel_cx0_read(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2));
+ l1t2 = intel_cx0_read(i915, port, 1, PHY_CX0_TX_CONTROL(2, 2));
+
+ if (lane_reversal) {
+ switch (lane_count) {
+ case 1:
+ /* Disable MLs 1(lane0), 2(lane0), 3(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2),
+ l1t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 2:
+ /* Disable MLs 1(lane0), 2(lane0) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2),
+ l0t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 3:
+ /* Disable MLs 1(lane0) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(1, 2),
+ l0t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ break;
+ }
+ } else {
+ switch (lane_count) {
+ case 1:
+ /* Disable MLs 2(lane0), 3(lane1), 4(lane1) */
+ intel_cx0_write(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2),
+ l0t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 2:
+ /* Disable MLs 3(lane1), 4(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(1, 2),
+ l1t1 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ fallthrough;
+ case 3:
+ /* Disable MLs 4(lane1) */
+ intel_cx0_write(i915, port, 1, PHY_CX0_TX_CONTROL(2, 2),
+ l1t2 | CONTROL2_DISABLE_SINGLE_TX,
+ MB_WRITE_COMMITTED);
+ break;
+ }
+ }
+
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+ C10_VDR_CTRL_UPDATE_CFG, C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
+}
+
+static u32 intel_cx0_get_pclk_pll_request(u8 lane)
+{
+ if (lane & INTEL_CX0_LANE0)
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST;
+ else if (lane & INTEL_CX0_LANE1)
+ return XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+ else
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST |
+ XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+}
+
+static u32 intel_cx0_get_pclk_pll_ack(u8 lane)
+{
+ if (lane & INTEL_CX0_LANE0)
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST;
+ else if (lane & INTEL_CX0_LANE1)
+ return XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+ else
+ return XELPDP_LANE0_PCLK_REFCLK_REQUEST |
+ XELPDP_LANE1_PCLK_REFCLK_REQUEST;
+}
+
+static void intel_c10pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+ struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+ bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
+ INTEL_CX0_LANE0;
+
+ /*
+ * 1. Program PORT_CLOCK_CTL REGISTER to configure
+ * clock muxes, gating and SSC
+ */
+ intel_program_port_clock_ctl(encoder, crtc_state, lane_reversal);
+
+ /* 2. Bring PHY out of reset. */
+ intel_cx0_phy_lane_reset(i915, encoder->port, lane_reversal);
+
+ /*
+ * 3. Change Phy power state to Ready.
+ * TODO: For DP alt mode use only one lane.
+ */
+ intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES,
+ CX0_P2_STATE_READY);
+
+ /* 4. Program PHY internal PLL internal registers. */
+ intel_c10_pll_program(i915, crtc_state, encoder);
+
+ /*
+ * 5. Program the enabled and disabled owned PHY lane
+ * transmitters over message bus
+ */
+ intel_c10_program_phy_lane(i915, encoder->port, crtc_state->lane_count, lane_reversal);
+
+ /*
+ * 6. Follow the Display Voltage Frequency Switching - Sequence
+ * Before Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /*
+ * 7. Program DDI_CLK_VALFREQ to match intended DDI
+ * clock frequency.
+ */
+ intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port),
+ crtc_state->port_clock);
+ /*
+ * 8. Set PORT_CLOCK_CTL register PCLK PLL Request
+ * LN<Lane for maxPCLK> to "1" to enable PLL.
+ */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ intel_cx0_get_pclk_pll_request(INTEL_CX0_BOTH_LANES),
+ intel_cx0_get_pclk_pll_request(maxpclk_lane));
+
+ /* 9. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK> == "1". */
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ intel_cx0_get_pclk_pll_ack(INTEL_CX0_BOTH_LANES),
+ intel_cx0_get_pclk_pll_ack(maxpclk_lane),
+ XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "Port %c PLL not locked after %dus.\n",
+ phy_name(phy), XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US);
+
+ /*
+ * 10. Follow the Display Voltage Frequency Switching Sequence After
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+}
+
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+ intel_c10pll_enable(encoder, crtc_state);
+}
+
+static void intel_c10pll_disable(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ /* 1. Change owned PHY lane power to Disable state. */
+ intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES,
+ CX0_P2PG_STATE_DISABLE);
+
+ /*
+ * 2. Follow the Display Voltage Frequency Switching Sequence Before
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /*
+ * 3. Set PORT_CLOCK_CTL register PCLK PLL Request LN<Lane for maxPCLK>
+ * to "0" to disable PLL.
+ */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ intel_cx0_get_pclk_pll_request(INTEL_CX0_BOTH_LANES) |
+ intel_cx0_get_pclk_refclk_request(INTEL_CX0_BOTH_LANES), 0);
+
+ /* 4. Program DDI_CLK_VALFREQ to 0. */
+ intel_de_write(i915, DDI_CLK_VALFREQ(encoder->port), 0);
+
+ /*
+ * 5. Poll on PORT_CLOCK_CTL PCLK PLL Ack LN<Lane for maxPCLK**> == "0".
+ */
+ if (__intel_wait_for_register(&i915->uncore, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ intel_cx0_get_pclk_pll_ack(INTEL_CX0_BOTH_LANES) |
+ intel_cx0_get_pclk_refclk_ack(INTEL_CX0_BOTH_LANES), 0,
+ XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US, 0, NULL))
+ drm_warn(&i915->drm, "Port %c PLL not unlocked after %dus.\n",
+ phy_name(phy), XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US);
+
+ /*
+ * 6. Follow the Display Voltage Frequency Switching Sequence After
+ * Frequency Change. We handle this step in bxt_set_cdclk().
+ */
+
+ /* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */
+ intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
+ XELPDP_DDI_CLOCK_SELECT_MASK |
+ XELPDP_FORWARD_CLOCK_UNGATE, 0);
+}
+
+void intel_cx0pll_disable(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+ intel_c10pll_disable(encoder);
+}
+
+void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
+ struct intel_crtc_state *new_crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ struct intel_c10mpllb_state mpllb_hw_state = { 0 };
+ struct intel_c10mpllb_state *mpllb_sw_state = &new_crtc_state->c10mpllb_state;
+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+ struct intel_encoder *encoder;
+ struct intel_dp *intel_dp;
+ enum phy phy;
+ int i;
+ bool use_ssc = false;
+
+ if (DISPLAY_VER(i915) < 14)
+ return;
+
+ if (!new_crtc_state->hw.active)
+ return;
+
+ encoder = intel_get_crtc_new_encoder(state, new_crtc_state);
+ phy = intel_port_to_phy(i915, encoder->port);
+
+ if (intel_crtc_has_dp_encoder(new_crtc_state)) {
+ intel_dp = enc_to_intel_dp(encoder);
+ use_ssc = (intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+ DP_MAX_DOWNSPREAD_0_5);
+
+ if (intel_dp_is_edp(intel_dp) && !intel_panel_use_ssc(i915))
+ use_ssc = false;
+ }
+
+ if (!intel_is_c10phy(i915, phy))
+ return;
+
+ intel_c10mpllb_readout_hw_state(encoder, &mpllb_hw_state);
+
+ for (i = 0; i < ARRAY_SIZE(mpllb_sw_state->pll); i++) {
+ u8 expected;
+
+ if (!use_ssc && i > 3 && i < 9)
+ expected = 0;
+ else
+ expected = mpllb_sw_state->pll[i];
+
+ I915_STATE_WARN(mpllb_hw_state.pll[i] != expected,
+ "[CRTC:%d:%s] mismatch in C10MPLLB: Register[%d] (expected 0x%02x, found 0x%02x)",
+ crtc->base.base.id, crtc->base.name,
+ i, expected, mpllb_hw_state.pll[i]);
+ }
+}
new file mode 100644
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#ifndef __INTEL_CX0_PHY_H__
+#define __INTEL_CX0_PHY_H__
+
+#include <linux/types.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+#include "i915_drv.h"
+#include "intel_display_types.h"
+
+struct drm_i915_private;
+struct intel_encoder;
+struct intel_crtc_state;
+enum phy;
+
+#define INTEL_CX0_LANE0 0x1
+#define INTEL_CX0_LANE1 0x2
+#define INTEL_CX0_BOTH_LANES 0x3
+
+#define MB_WRITE_COMMITTED 1
+#define MB_WRITE_UNCOMMITTED 0
+
+bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy);
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state);
+void intel_cx0pll_disable(struct intel_encoder *encoder);
+void intel_c10mpllb_readout_hw_state(struct intel_encoder *encoder,
+ struct intel_c10mpllb_state *pll_state);
+int intel_cx0mpllb_calc_state(struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder);
+void intel_c10mpllb_dump_hw_state(struct drm_i915_private *dev_priv,
+ const struct intel_c10mpllb_state *hw_state);
+int intel_c10mpllb_calc_port_clock(struct intel_encoder *encoder,
+ const struct intel_c10mpllb_state *pll_state);
+void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
+ struct intel_crtc_state *new_crtc_state);
+
+#endif /* __INTEL_CX0_PHY_H__ */
new file mode 100644
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __INTEL_CX0_REG_DEFS_H__
+#define __INTEL_CX0_REG_DEFS_H__
+
+/* C10 Vendor Registers */
+#define PHY_C10_VDR_PLL(idx) (0xC00 + (idx))
+#define C10_PLL0_FRACEN REG_BIT8(4)
+#define C10_PLL3_MULTIPLIERH_MASK REG_GENMASK8(3, 0)
+#define C10_PLL15_TXCLKDIV_MASK REG_GENMASK8(2, 0)
+#define PHY_C10_VDR_CMN(idx) (0xC20 + (idx))
+#define C10_CMN0_DP_VAL 0x21
+#define C10_CMN3_TXVBOOST_MASK REG_GENMASK8(7, 5)
+#define C10_CMN3_TXVBOOST(val) REG_FIELD_PREP8(C10_CMN3_TXVBOOST_MASK, val)
+#define PHY_C10_VDR_TX(idx) (0xC30 + (idx))
+#define C10_TX0_VAL 0x10
+#define PHY_C10_VDR_CONTROL(idx) (0xC70 + (idx) - 1)
+#define C10_VDR_CTRL_MSGBUS_ACCESS REG_BIT8(2)
+#define C10_VDR_CTRL_MASTER_LANE REG_BIT8(1)
+#define C10_VDR_CTRL_UPDATE_CFG REG_BIT8(0)
+#define PHY_C10_VDR_CUSTOM_WIDTH 0xD02
+
+#endif /* __INTEL_CX0_REG_DEFS_H__ */
@@ -133,4 +133,34 @@
#define XELPDP_SSC_ENABLE_PLLA REG_BIT(1)
#define XELPDP_SSC_ENABLE_PLLB REG_BIT(0)
+/* C10 Vendor Registers */
+#define PHY_C10_VDR_PLL(idx) (0xC00 + (idx))
+#define C10_PLL0_FRACEN REG_BIT8(4)
+#define C10_PLL3_MULTIPLIERH_MASK REG_GENMASK8(3, 0)
+#define C10_PLL15_TXCLKDIV_MASK REG_GENMASK8(2, 0)
+#define PHY_C10_VDR_CMN(idx) (0xC20 + (idx))
+#define C10_CMN0_DP_VAL 0x21
+#define C10_CMN3_TXVBOOST_MASK REG_GENMASK8(7, 5)
+#define C10_CMN3_TXVBOOST(val) REG_FIELD_PREP8(C10_CMN3_TXVBOOST_MASK, val)
+#define PHY_C10_VDR_TX(idx) (0xC30 + (idx))
+#define C10_TX0_VAL 0x10
+#define PHY_C10_VDR_CONTROL(idx) (0xC70 + (idx) - 1)
+#define C10_VDR_CTRL_MSGBUS_ACCESS REG_BIT8(2)
+#define C10_VDR_CTRL_MASTER_LANE REG_BIT8(1)
+#define C10_VDR_CTRL_UPDATE_CFG REG_BIT8(0)
+#define PHY_C10_VDR_CUSTOM_WIDTH 0xD02
+
+#define CX0_P0_STATE_ACTIVE 0x0
+#define CX0_P2_STATE_READY 0x2
+#define CX0_P2PG_STATE_DISABLE 0x9
+#define CX0_P4PG_STATE_DISABLE 0xC
+#define CX0_P2_STATE_RESET 0x2
+
+/* PHY_C10_VDR_PLL0 */
+#define PLL_C10_MPLL_SSC_EN REG_BIT8(0)
+
+/* PIPE SPEC Defined Registers */
+#define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 + (control))
+#define CONTROL2_DISABLE_SINGLE_TX REG_BIT(6)
+
#endif /* __INTEL_CX0_REG_DEFS_H__ */
@@ -38,6 +38,7 @@
#include "intel_combo_phy_regs.h"
#include "intel_connector.h"
#include "intel_crtc.h"
+#include "intel_cx0_phy.h"
#include "intel_ddi.h"
#include "intel_ddi_buf_trans.h"
#include "intel_de.h"
@@ -3487,6 +3488,21 @@ void intel_ddi_get_clock(struct intel_encoder *encoder,
&crtc_state->dpll_hw_state);
}
+static void mtl_ddi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
+
+ intel_c10mpllb_readout_hw_state(encoder, &crtc_state->c10mpllb_state);
+ intel_c10mpllb_dump_hw_state(i915, &crtc_state->c10mpllb_state);
+ crtc_state->port_clock = intel_c10mpllb_calc_port_clock(encoder, &crtc_state->c10mpllb_state);
+
+ intel_ddi_get_config(encoder, crtc_state);
+}
+
static void dg2_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state)
{
@@ -4367,7 +4383,11 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
encoder->cloneable = 0;
encoder->pipe_mask = ~0;
- if (IS_DG2(dev_priv)) {
+ if (DISPLAY_VER(dev_priv) >= 14) {
+ encoder->enable_clock = intel_cx0pll_enable;
+ encoder->disable_clock = intel_cx0pll_disable;
+ encoder->get_config = mtl_ddi_get_config;
+ } else if (IS_DG2(dev_priv)) {
encoder->enable_clock = intel_mpllb_enable;
encoder->disable_clock = intel_mpllb_disable;
encoder->get_config = dg2_ddi_get_config;
@@ -47,6 +47,7 @@
#include "display/intel_audio.h"
#include "display/intel_crt.h"
+#include "display/intel_cx0_phy.h"
#include "display/intel_ddi.h"
#include "display/intel_display_debugfs.h"
#include "display/intel_display_power.h"
@@ -1625,7 +1625,8 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
return;
/* 2. Initialize all combo phys */
- intel_combo_phy_init(dev_priv);
+ if (DISPLAY_VER(dev_priv) < 14)
+ intel_combo_phy_init(dev_priv);
/*
* 3. Enable Power Well 1 (PG1).
@@ -980,7 +980,7 @@ void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
bxt_verify_ddi_phy_power_wells(dev_priv);
- if (DISPLAY_VER(dev_priv) >= 11)
+ if (DISPLAY_VER(dev_priv) >= 11 && DISPLAY_VER(dev_priv) < 14)
/*
* DMC retains HW context only for port A, the other combo
* PHY's HW context for port B is lost after DC transitions,
@@ -969,6 +969,11 @@ struct intel_mpllb_state {
u32 mpllb_sscstep;
};
+struct intel_c10mpllb_state {
+ u32 clock; /* in KHz */
+ u8 pll[20];
+};
+
struct intel_crtc_state {
/*
* uapi (drm) state. This is the software state shown to userspace.
@@ -1108,6 +1113,7 @@ struct intel_crtc_state {
union {
struct intel_dpll_hw_state dpll_hw_state;
struct intel_mpllb_state mpllb_state;
+ struct intel_c10mpllb_state c10mpllb_state;
};
/*
@@ -7,6 +7,7 @@
#include <linux/string_helpers.h>
#include "intel_crtc.h"
+#include "intel_cx0_phy.h"
#include "intel_de.h"
#include "intel_display.h"
#include "intel_display_types.h"
@@ -993,6 +994,17 @@ static int dg2_crtc_compute_clock(struct intel_atomic_state *state,
return 0;
}
+static int mtl_crtc_compute_clock(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
+{
+ struct intel_crtc_state *crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
+ struct intel_encoder *encoder =
+ intel_get_crtc_new_encoder(state, crtc_state);
+
+ return intel_cx0mpllb_calc_state(crtc_state, encoder);
+}
+
static bool ilk_needs_fb_cb_tune(const struct dpll *dpll, int factor)
{
return dpll->m < factor * dpll->n;
@@ -1421,6 +1433,10 @@ static int i8xx_crtc_compute_clock(struct intel_atomic_state *state,
return 0;
}
+static const struct intel_dpll_funcs mtl_dpll_funcs = {
+ .crtc_compute_clock = mtl_crtc_compute_clock,
+};
+
static const struct intel_dpll_funcs dg2_dpll_funcs = {
.crtc_compute_clock = dg2_crtc_compute_clock,
};
@@ -1515,7 +1531,11 @@ int intel_dpll_crtc_get_shared_dpll(struct intel_atomic_state *state,
void
intel_dpll_init_clock_hook(struct drm_i915_private *dev_priv)
{
- if (IS_DG2(dev_priv))
+ if (DISPLAY_VER(dev_priv) >= 14)
+ dev_priv->display.funcs.dpll = &mtl_dpll_funcs;
+ else if (DISPLAY_VER(dev_priv) >= 14)
+ dev_priv->display.funcs.dpll = &mtl_dpll_funcs;
+ else if (IS_DG2(dev_priv))
dev_priv->display.funcs.dpll = &dg2_dpll_funcs;
else if (DISPLAY_VER(dev_priv) >= 9 || HAS_DDI(dev_priv))
dev_priv->display.funcs.dpll = &hsw_dpll_funcs;
@@ -4173,7 +4173,7 @@ void intel_shared_dpll_init(struct drm_i915_private *dev_priv)
mutex_init(&dev_priv->display.dpll.lock);
- if (IS_DG2(dev_priv))
+ if (DISPLAY_VER(dev_priv) >= 14 || IS_DG2(dev_priv))
/* No shared DPLLs on DG2; port PLLs are part of the PHY */
dpll_mgr = NULL;
else if (IS_ALDERLAKE_P(dev_priv))
@@ -11,6 +11,7 @@
#include "intel_atomic.h"
#include "intel_crtc.h"
#include "intel_crtc_state_dump.h"
+#include "intel_cx0_phy.h"
#include "intel_display.h"
#include "intel_display_types.h"
#include "intel_fdi.h"
@@ -235,6 +236,7 @@ void intel_modeset_verify_crtc(struct intel_crtc *crtc,
verify_crtc_state(crtc, old_crtc_state, new_crtc_state);
intel_shared_dpll_state_verify(crtc, old_crtc_state, new_crtc_state);
intel_mpllb_state_verify(state, new_crtc_state);
+ intel_c10mpllb_state_verify(state, new_crtc_state);
}
void intel_modeset_verify_disabled(struct drm_i915_private *dev_priv,
@@ -2121,6 +2121,11 @@
#define TRANS_PUSH_EN REG_BIT(31)
#define TRANS_PUSH_SEND REG_BIT(30)
+/* DDI Buffer Control */
+#define _DDI_CLK_VALFREQ_A 0x64030
+#define _DDI_CLK_VALFREQ_B 0x64130
+#define DDI_CLK_VALFREQ(port) _MMIO_PORT(port, _DDI_CLK_VALFREQ_A, _DDI_CLK_VALFREQ_B)
+
/*
* HSW+ eDP PSR registers
*
@@ -22,6 +22,19 @@
BUILD_BUG_ON_ZERO(__is_constexpr(__n) && \
((__n) < 0 || (__n) > 31))))
+/**
+ * REG_BIT8() - Prepare a u8 bit value
+ * @__n: 0-based bit number
+ *
+ * Local wrapper for BIT() to force u8, with compile time checks.
+ *
+ * @return: Value with bit @__n set.
+ */
+#define REG_BIT8(__n) \
+ ((u8)(BIT(__n) + \
+ BUILD_BUG_ON_ZERO(__is_constexpr(__n) && \
+ ((__n) < 0 || (__n) > 7))))
+
/**
* REG_GENMASK() - Prepare a continuous u32 bitmask
* @__high: 0-based high bit
@@ -52,6 +65,21 @@
__is_constexpr(__low) && \
((__low) < 0 || (__high) > 63 || (__low) > (__high)))))
+/**
+ * REG_GENMASK8() - Prepare a continuous u8 bitmask
+ * @__high: 0-based high bit
+ * @__low: 0-based low bit
+ *
+ * Local wrapper for GENMASK() to force u8, with compile time checks.
+ *
+ * @return: Continuous bitmask from @__high to @__low, inclusive.
+ */
+#define REG_GENMASK8(__high, __low) \
+ ((u8)(GENMASK(__high, __low) + \
+ BUILD_BUG_ON_ZERO(__is_constexpr(__high) && \
+ __is_constexpr(__low) && \
+ ((__low) < 0 || (__high) > 7 || (__low) > (__high)))))
+
/*
* Local integer constant expression version of is_power_of_2().
*/
@@ -74,6 +102,23 @@
BUILD_BUG_ON_ZERO(!IS_POWER_OF_2((__mask) + (1ULL << __bf_shf(__mask)))) + \
BUILD_BUG_ON_ZERO(__builtin_choose_expr(__is_constexpr(__val), (~((__mask) >> __bf_shf(__mask)) & (__val)), 0))))
+/**
+ * REG_FIELD_PREP8() - Prepare a u8 bitfield value
+ * @__mask: shifted mask defining the field's length and position
+ * @__val: value to put in the field
+ *
+ * Local copy of FIELD_PREP8() to generate an integer constant expression, force
+ * u8 and for consistency with REG_FIELD_GET8(), REG_BIT8() and REG_GENMASK8().
+ *
+ * @return: @__val masked and shifted into the field defined by @__mask.
+ */
+#define REG_FIELD_PREP8(__mask, __val) \
+ ((u8)((((typeof(__mask))(__val) << __bf_shf(__mask)) & (__mask)) + \
+ BUILD_BUG_ON_ZERO(!__is_constexpr(__mask)) + \
+ BUILD_BUG_ON_ZERO((__mask) == 0 || (__mask) > U8_MAX) + \
+ BUILD_BUG_ON_ZERO(!IS_POWER_OF_2((__mask) + (1ULL << __bf_shf(__mask)))) + \
+ BUILD_BUG_ON_ZERO(__builtin_choose_expr(__is_constexpr(__val), (~((__mask) >> __bf_shf(__mask)) & (__val)), 0))))
+
/**
* REG_FIELD_GET() - Extract a u32 bitfield value
* @__mask: shifted mask defining the field's length and position
@@ -98,6 +143,18 @@
*/
#define REG_FIELD_GET64(__mask, __val) ((u64)FIELD_GET(__mask, __val))
+/**
+ * REG_FIELD_GET8() - Extract a u8 bitfield value
+ * @__mask: shifted mask defining the field's length and position
+ * @__val: value to extract the bitfield value from
+ *
+ * Local wrapper for FIELD_GET() to force u8 and for consistency with
+ * REG_FIELD_PREP(), REG_BIT() and REG_GENMASK().
+ *
+ * @return: Masked and shifted value of the field defined by @__mask in @__val.
+ */
+#define REG_FIELD_GET8(__mask, __val) ((u8)FIELD_GET(__mask, __val))
+
typedef struct {
u32 reg;
} i915_reg_t;