diff mbox series

[1/2] drm/i915/display: Do both crawl and squash when changing cdclk

Message ID 20221026232257.281240-1-anusha.srivatsa@intel.com (mailing list archive)
State New, archived
Headers show
Series [1/2] drm/i915/display: Do both crawl and squash when changing cdclk | expand

Commit Message

Srivatsa, Anusha Oct. 26, 2022, 11:22 p.m. UTC 
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

For MTL, changing cdclk from between certain frequencies has
both squash and crawl. Use the current cdclk config and
the new(desired) cdclk config to construtc a mid cdclk config.
Set the cdclk twice:
- Current cdclk -> mid cdclk
- mid cdclk -> desired cdclk

v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk
change via modeset for platforms that support squash_crawl sequences(Ville)

v3: Add checks for:
- scenario where only slow clock is used and
cdclk is actually 0 (bringing up display).
- PLLs are on before looking up the waveform.
- Squash and crawl capability checks.(Ville)

v4: Rebase
- Move checks to be more consistent (Ville)
- Add comments (Bala)

Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 157 +++++++++++++++++----
 1 file changed, 129 insertions(+), 28 deletions(-)

Comments

Ville Syrjälä Oct. 28, 2022, 9:05 a.m. UTC | #1 
On Wed, Oct 26, 2022 at 04:22:56PM -0700, Anusha Srivatsa wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> For MTL, changing cdclk from between certain frequencies has
> both squash and crawl. Use the current cdclk config and
> the new(desired) cdclk config to construtc a mid cdclk config.
> Set the cdclk twice:
> - Current cdclk -> mid cdclk
> - mid cdclk -> desired cdclk
> 
> v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk
> change via modeset for platforms that support squash_crawl sequences(Ville)
> 
> v3: Add checks for:
> - scenario where only slow clock is used and
> cdclk is actually 0 (bringing up display).
> - PLLs are on before looking up the waveform.
> - Squash and crawl capability checks.(Ville)
> 
> v4: Rebase
> - Move checks to be more consistent (Ville)
> - Add comments (Bala)
> 
> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cdclk.c | 157 +++++++++++++++++----
>  1 file changed, 129 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index eada931cb1c8..6a775367f02a 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -1716,37 +1716,74 @@ static void dg2_cdclk_squash_program(struct drm_i915_private *i915,
>  	intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl);
>  }
>  
> -static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> -			  const struct intel_cdclk_config *cdclk_config,
> -			  enum pipe pipe)
> +static int cdclk_squash_divider(u16 waveform)
> +{
> +	return hweight16(waveform ?: 0xffff);
> +}
> +
> +static bool cdclk_crawl_and_squash(struct drm_i915_private *i915,
> +				   const struct intel_cdclk_config *old_cdclk_config,
> +				   const struct intel_cdclk_config *new_cdclk_config,
> +				   struct intel_cdclk_config *mid_cdclk_config)
> +{
> +	u16 old_waveform, new_waveform, mid_waveform;
> +	int size = 16;
> +	int div = 2;
> +
> +	/* Return if both Squash and Crawl are not present */
> +	if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
> +		return false;
> +
> +	/* Return if Squash only or Crawl only is the desired action */
> +	if (old_cdclk_config->vco <= 0 || new_cdclk_config->vco <= 0 ||
> +	    old_cdclk_config->vco == new_cdclk_config->vco ||
> +	    old_waveform == new_waveform)

Those are not yet initialized.

> +		return false;
> +
> +	old_waveform = cdclk_squash_waveform(i915, old_cdclk_config->cdclk);
> +	new_waveform = cdclk_squash_waveform(i915, new_cdclk_config->cdclk);
> +
> +	*mid_cdclk_config = *new_cdclk_config;
> +
> +	/* Populate the mid_cdclk_config accordingly.
> +	 * - If moving to a higher cdclk, the desired action is squashing.
> +	 * The mid cdclk config should have the new (squash) waveform.
> +	 * - If moving to a lower cdclk, the desired action is crawling.
> +	 * The mid cdclk config should have the new vco.
> +	 */
> +
> +	if (cdclk_squash_divider(new_waveform) > cdclk_squash_divider(old_waveform)) {
> +		mid_cdclk_config->vco = old_cdclk_config->vco;
> +		mid_waveform = new_waveform;
> +	} else {
> +		mid_cdclk_config->vco = new_cdclk_config->vco;
> +		mid_waveform = old_waveform;
> +	}
> +
> +	mid_cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
> +						    mid_cdclk_config->vco, size * div);
> +
> +	/* make sure the mid clock came out sane */
> +
> +	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
> +		    min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
> +	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
> +		    i915->display.cdclk.max_cdclk_freq);
> +	drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915, mid_cdclk_config->cdclk) !=
> +		    mid_waveform);
> +
> +	return true;
> +}
> +
> +static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
> +			   const struct intel_cdclk_config *cdclk_config,
> +			   enum pipe pipe)
>  {
>  	int cdclk = cdclk_config->cdclk;
>  	int vco = cdclk_config->vco;
>  	u32 val;
>  	u16 waveform;
>  	int clock;
> -	int ret;
> -
> -	/* Inform power controller of upcoming frequency change. */
> -	if (DISPLAY_VER(dev_priv) >= 11)
> -		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> -					SKL_CDCLK_PREPARE_FOR_CHANGE,
> -					SKL_CDCLK_READY_FOR_CHANGE,
> -					SKL_CDCLK_READY_FOR_CHANGE, 3);
> -	else
> -		/*
> -		 * BSpec requires us to wait up to 150usec, but that leads to
> -		 * timeouts; the 2ms used here is based on experiment.
> -		 */
> -		ret = snb_pcode_write_timeout(&dev_priv->uncore,
> -					      HSW_PCODE_DE_WRITE_FREQ_REQ,
> -					      0x80000000, 150, 2);
> -	if (ret) {
> -		drm_err(&dev_priv->drm,
> -			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
> -			ret, cdclk);
> -		return;
> -	}
>  
>  	if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco > 0 && vco > 0) {
>  		if (dev_priv->display.cdclk.hw.vco != vco)
> @@ -1781,6 +1818,44 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>  
>  	if (pipe != INVALID_PIPE)
>  		intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
> +}
> +
> +static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> +			  const struct intel_cdclk_config *cdclk_config,
> +			  enum pipe pipe)
> +{
> +	struct intel_cdclk_config mid_cdclk_config;
> +	int cdclk = cdclk_config->cdclk;
> +	int ret;
> +
> +	/* Inform power controller of upcoming frequency change. */
> +	if (DISPLAY_VER(dev_priv) >= 11)
> +		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> +					SKL_CDCLK_PREPARE_FOR_CHANGE,
> +					SKL_CDCLK_READY_FOR_CHANGE,
> +					SKL_CDCLK_READY_FOR_CHANGE, 3);
> +	else
> +		/*
> +		 * BSpec requires us to wait up to 150usec, but that leads to
> +		 * timeouts; the 2ms used here is based on experiment.
> +		 */
> +		ret = snb_pcode_write_timeout(&dev_priv->uncore,
> +					      HSW_PCODE_DE_WRITE_FREQ_REQ,
> +					      0x80000000, 150, 2);
> +	if (ret) {
> +		drm_err(&dev_priv->drm,
> +			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
> +			ret, cdclk);
> +		return;
> +	}
> +
> +	if (cdclk_crawl_and_squash(dev_priv, &dev_priv->display.cdclk.hw,
> +				   cdclk_config, &mid_cdclk_config)) {
> +		_bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
> +		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> +	} else {
> +		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> +	}
>  
>  	if (DISPLAY_VER(dev_priv) >= 11) {
>  		ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> @@ -1953,6 +2028,27 @@ void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
>  		skl_cdclk_uninit_hw(i915);
>  }
>  
> +static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private *i915,
> +					     const struct intel_cdclk_config *a,
> +					     const struct intel_cdclk_config *b)
> +{
> +	u16 old_waveform;
> +	u16 new_waveform;
> +
> +	if (a->vco == 0 || b->vco == 0)
> +		return false;
> +
> +	if (HAS_CDCLK_CRAWL(i915) && HAS_CDCLK_SQUASH(i915)) {
> +		old_waveform = cdclk_squash_waveform(i915, a->cdclk);
> +		new_waveform = cdclk_squash_waveform(i915, b->cdclk);
> +	} else {
> +		return false;
> +	}

Still weird.

> +
> +	return a->vco != b->vco &&
> +	       old_waveform != new_waveform;
> +}
> +
>  static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
>  				  const struct intel_cdclk_config *a,
>  				  const struct intel_cdclk_config *b)
> @@ -2759,9 +2855,14 @@ int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
>  			pipe = INVALID_PIPE;
>  	}
>  
> -	if (intel_cdclk_can_squash(dev_priv,
> -				   &old_cdclk_state->actual,
> -				   &new_cdclk_state->actual)) {
> +	if (intel_cdclk_can_crawl_and_squash(dev_priv,
> +					     &old_cdclk_state->actual,
> +					     &new_cdclk_state->actual)) {
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Can change cdclk via crawling and squashing\n");
> +	} else if (intel_cdclk_can_squash(dev_priv,
> +					&old_cdclk_state->actual,
> +					&new_cdclk_state->actual)) {
>  		drm_dbg_kms(&dev_priv->drm,
>  			    "Can change cdclk via squashing\n");
>  	} else if (intel_cdclk_can_crawl(dev_priv,
> -- 
> 2.25.1
Srivatsa, Anusha Oct. 28, 2022, 9:27 p.m. UTC | #2 
> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Friday, October 28, 2022 2:05 AM
> To: Srivatsa, Anusha <anusha.srivatsa@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Vivekanandan, Balasubramani
> <balasubramani.vivekanandan@intel.com>
> Subject: Re: [PATCH 1/2] drm/i915/display: Do both crawl and squash when
> changing cdclk
> 
> On Wed, Oct 26, 2022 at 04:22:56PM -0700, Anusha Srivatsa wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > For MTL, changing cdclk from between certain frequencies has both
> > squash and crawl. Use the current cdclk config and the new(desired)
> > cdclk config to construtc a mid cdclk config.
> > Set the cdclk twice:
> > - Current cdclk -> mid cdclk
> > - mid cdclk -> desired cdclk
> >
> > v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk change via
> > modeset for platforms that support squash_crawl sequences(Ville)
> >
> > v3: Add checks for:
> > - scenario where only slow clock is used and cdclk is actually 0
> > (bringing up display).
> > - PLLs are on before looking up the waveform.
> > - Squash and crawl capability checks.(Ville)
> >
> > v4: Rebase
> > - Move checks to be more consistent (Ville)
> > - Add comments (Bala)
> >
> > Cc: Balasubramani Vivekanandan
> <balasubramani.vivekanandan@intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_cdclk.c | 157
> > +++++++++++++++++----
> >  1 file changed, 129 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c
> > b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > index eada931cb1c8..6a775367f02a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> > +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > @@ -1716,37 +1716,74 @@ static void dg2_cdclk_squash_program(struct
> drm_i915_private *i915,
> >  	intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl);  }
> >
> > -static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > -			  const struct intel_cdclk_config *cdclk_config,
> > -			  enum pipe pipe)
> > +static int cdclk_squash_divider(u16 waveform) {
> > +	return hweight16(waveform ?: 0xffff); }
> > +
> > +static bool cdclk_crawl_and_squash(struct drm_i915_private *i915,
> > +				   const struct intel_cdclk_config
> *old_cdclk_config,
> > +				   const struct intel_cdclk_config
> *new_cdclk_config,
> > +				   struct intel_cdclk_config *mid_cdclk_config)
> {
> > +	u16 old_waveform, new_waveform, mid_waveform;
> > +	int size = 16;
> > +	int div = 2;
> > +
> > +	/* Return if both Squash and Crawl are not present */
> > +	if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
> > +		return false;
> > +
> > +	/* Return if Squash only or Crawl only is the desired action */
> > +	if (old_cdclk_config->vco <= 0 || new_cdclk_config->vco <= 0 ||
> > +	    old_cdclk_config->vco == new_cdclk_config->vco ||
> > +	    old_waveform == new_waveform)
> 
> Those are not yet initialized.
*facepalm*

> > +		return false;
> > +
> > +	old_waveform = cdclk_squash_waveform(i915, old_cdclk_config-
> >cdclk);
> > +	new_waveform = cdclk_squash_waveform(i915, new_cdclk_config-
> >cdclk);
> > +
> > +	*mid_cdclk_config = *new_cdclk_config;
> > +
> > +	/* Populate the mid_cdclk_config accordingly.
> > +	 * - If moving to a higher cdclk, the desired action is squashing.
> > +	 * The mid cdclk config should have the new (squash) waveform.
> > +	 * - If moving to a lower cdclk, the desired action is crawling.
> > +	 * The mid cdclk config should have the new vco.
> > +	 */
> > +
> > +	if (cdclk_squash_divider(new_waveform) >
> cdclk_squash_divider(old_waveform)) {
> > +		mid_cdclk_config->vco = old_cdclk_config->vco;
> > +		mid_waveform = new_waveform;
> > +	} else {
> > +		mid_cdclk_config->vco = new_cdclk_config->vco;
> > +		mid_waveform = old_waveform;
> > +	}
> > +
> > +	mid_cdclk_config->cdclk =
> DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
> > +						    mid_cdclk_config->vco, size
> * div);
> > +
> > +	/* make sure the mid clock came out sane */
> > +
> > +	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
> > +		    min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
> > +	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
> > +		    i915->display.cdclk.max_cdclk_freq);
> > +	drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915,
> mid_cdclk_config->cdclk) !=
> > +		    mid_waveform);
> > +
> > +	return true;
> > +}
> > +
> > +static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > +			   const struct intel_cdclk_config *cdclk_config,
> > +			   enum pipe pipe)
> >  {
> >  	int cdclk = cdclk_config->cdclk;
> >  	int vco = cdclk_config->vco;
> >  	u32 val;
> >  	u16 waveform;
> >  	int clock;
> > -	int ret;
> > -
> > -	/* Inform power controller of upcoming frequency change. */
> > -	if (DISPLAY_VER(dev_priv) >= 11)
> > -		ret = skl_pcode_request(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > -					SKL_CDCLK_PREPARE_FOR_CHANGE,
> > -					SKL_CDCLK_READY_FOR_CHANGE,
> > -					SKL_CDCLK_READY_FOR_CHANGE, 3);
> > -	else
> > -		/*
> > -		 * BSpec requires us to wait up to 150usec, but that leads to
> > -		 * timeouts; the 2ms used here is based on experiment.
> > -		 */
> > -		ret = snb_pcode_write_timeout(&dev_priv->uncore,
> > -
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> > -					      0x80000000, 150, 2);
> > -	if (ret) {
> > -		drm_err(&dev_priv->drm,
> > -			"Failed to inform PCU about cdclk change (err %d,
> freq %d)\n",
> > -			ret, cdclk);
> > -		return;
> > -	}
> >
> >  	if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco
> > 0 && vco > 0) {
> >  		if (dev_priv->display.cdclk.hw.vco != vco) @@ -1781,6
> +1818,44 @@
> > static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> >
> >  	if (pipe != INVALID_PIPE)
> >
> 	intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv,
> > pipe));
> > +}
> > +
> > +static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > +			  const struct intel_cdclk_config *cdclk_config,
> > +			  enum pipe pipe)
> > +{
> > +	struct intel_cdclk_config mid_cdclk_config;
> > +	int cdclk = cdclk_config->cdclk;
> > +	int ret;
> > +
> > +	/* Inform power controller of upcoming frequency change. */
> > +	if (DISPLAY_VER(dev_priv) >= 11)
> > +		ret = skl_pcode_request(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > +					SKL_CDCLK_PREPARE_FOR_CHANGE,
> > +					SKL_CDCLK_READY_FOR_CHANGE,
> > +					SKL_CDCLK_READY_FOR_CHANGE, 3);
> > +	else
> > +		/*
> > +		 * BSpec requires us to wait up to 150usec, but that leads to
> > +		 * timeouts; the 2ms used here is based on experiment.
> > +		 */
> > +		ret = snb_pcode_write_timeout(&dev_priv->uncore,
> > +
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> > +					      0x80000000, 150, 2);
> > +	if (ret) {
> > +		drm_err(&dev_priv->drm,
> > +			"Failed to inform PCU about cdclk change (err %d,
> freq %d)\n",
> > +			ret, cdclk);
> > +		return;
> > +	}
> > +
> > +	if (cdclk_crawl_and_squash(dev_priv, &dev_priv->display.cdclk.hw,
> > +				   cdclk_config, &mid_cdclk_config)) {
> > +		_bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
> > +		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> > +	} else {
> > +		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> > +	}
> >
> >  	if (DISPLAY_VER(dev_priv) >= 11) {
> >  		ret = snb_pcode_write(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > @@ -1953,6 +2028,27 @@ void intel_cdclk_uninit_hw(struct
> drm_i915_private *i915)
> >  		skl_cdclk_uninit_hw(i915);
> >  }
> >
> > +static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private
> *i915,
> > +					     const struct intel_cdclk_config *a,
> > +					     const struct intel_cdclk_config *b) {
> > +	u16 old_waveform;
> > +	u16 new_waveform;
> > +
> > +	if (a->vco == 0 || b->vco == 0)
> > +		return false;
> > +
> > +	if (HAS_CDCLK_CRAWL(i915) && HAS_CDCLK_SQUASH(i915)) {
> > +		old_waveform = cdclk_squash_waveform(i915, a->cdclk);
> > +		new_waveform = cdclk_squash_waveform(i915, b->cdclk);
> > +	} else {
> > +		return false;
> > +	}
> 
> Still weird.
Agreed. Changing this.

Anusha 
> > +
> > +	return a->vco != b->vco &&
> > +	       old_waveform != new_waveform; }
> > +
> >  static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
> >  				  const struct intel_cdclk_config *a,
> >  				  const struct intel_cdclk_config *b) @@ -
> 2759,9 +2855,14 @@ int
> > intel_modeset_calc_cdclk(struct intel_atomic_state *state)
> >  			pipe = INVALID_PIPE;
> >  	}
> >
> > -	if (intel_cdclk_can_squash(dev_priv,
> > -				   &old_cdclk_state->actual,
> > -				   &new_cdclk_state->actual)) {
> > +	if (intel_cdclk_can_crawl_and_squash(dev_priv,
> > +					     &old_cdclk_state->actual,
> > +					     &new_cdclk_state->actual)) {
> > +		drm_dbg_kms(&dev_priv->drm,
> > +			    "Can change cdclk via crawling and squashing\n");
> > +	} else if (intel_cdclk_can_squash(dev_priv,
> > +					&old_cdclk_state->actual,
> > +					&new_cdclk_state->actual)) {
> >  		drm_dbg_kms(&dev_priv->drm,
> >  			    "Can change cdclk via squashing\n");
> >  	} else if (intel_cdclk_can_crawl(dev_priv,
> > --
> > 2.25.1
> 
> --
> Ville Syrjälä
> Intel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index eada931cb1c8..6a775367f02a 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1716,37 +1716,74 @@  static void dg2_cdclk_squash_program(struct drm_i915_private *i915,
 	intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl);
 }
 
-static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_config *cdclk_config,
-			  enum pipe pipe)
+static int cdclk_squash_divider(u16 waveform)
+{
+	return hweight16(waveform ?: 0xffff);
+}
+
+static bool cdclk_crawl_and_squash(struct drm_i915_private *i915,
+				   const struct intel_cdclk_config *old_cdclk_config,
+				   const struct intel_cdclk_config *new_cdclk_config,
+				   struct intel_cdclk_config *mid_cdclk_config)
+{
+	u16 old_waveform, new_waveform, mid_waveform;
+	int size = 16;
+	int div = 2;
+
+	/* Return if both Squash and Crawl are not present */
+	if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
+		return false;
+
+	/* Return if Squash only or Crawl only is the desired action */
+	if (old_cdclk_config->vco <= 0 || new_cdclk_config->vco <= 0 ||
+	    old_cdclk_config->vco == new_cdclk_config->vco ||
+	    old_waveform == new_waveform)
+		return false;
+
+	old_waveform = cdclk_squash_waveform(i915, old_cdclk_config->cdclk);
+	new_waveform = cdclk_squash_waveform(i915, new_cdclk_config->cdclk);
+
+	*mid_cdclk_config = *new_cdclk_config;
+
+	/* Populate the mid_cdclk_config accordingly.
+	 * - If moving to a higher cdclk, the desired action is squashing.
+	 * The mid cdclk config should have the new (squash) waveform.
+	 * - If moving to a lower cdclk, the desired action is crawling.
+	 * The mid cdclk config should have the new vco.
+	 */
+
+	if (cdclk_squash_divider(new_waveform) > cdclk_squash_divider(old_waveform)) {
+		mid_cdclk_config->vco = old_cdclk_config->vco;
+		mid_waveform = new_waveform;
+	} else {
+		mid_cdclk_config->vco = new_cdclk_config->vco;
+		mid_waveform = old_waveform;
+	}
+
+	mid_cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
+						    mid_cdclk_config->vco, size * div);
+
+	/* make sure the mid clock came out sane */
+
+	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
+		    min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
+	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
+		    i915->display.cdclk.max_cdclk_freq);
+	drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915, mid_cdclk_config->cdclk) !=
+		    mid_waveform);
+
+	return true;
+}
+
+static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
+			   const struct intel_cdclk_config *cdclk_config,
+			   enum pipe pipe)
 {
 	int cdclk = cdclk_config->cdclk;
 	int vco = cdclk_config->vco;
 	u32 val;
 	u16 waveform;
 	int clock;
-	int ret;
-
-	/* Inform power controller of upcoming frequency change. */
-	if (DISPLAY_VER(dev_priv) >= 11)
-		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
-					SKL_CDCLK_PREPARE_FOR_CHANGE,
-					SKL_CDCLK_READY_FOR_CHANGE,
-					SKL_CDCLK_READY_FOR_CHANGE, 3);
-	else
-		/*
-		 * BSpec requires us to wait up to 150usec, but that leads to
-		 * timeouts; the 2ms used here is based on experiment.
-		 */
-		ret = snb_pcode_write_timeout(&dev_priv->uncore,
-					      HSW_PCODE_DE_WRITE_FREQ_REQ,
-					      0x80000000, 150, 2);
-	if (ret) {
-		drm_err(&dev_priv->drm,
-			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
-			ret, cdclk);
-		return;
-	}
 
 	if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco > 0 && vco > 0) {
 		if (dev_priv->display.cdclk.hw.vco != vco)
@@ -1781,6 +1818,44 @@  static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 
 	if (pipe != INVALID_PIPE)
 		intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
+}
+
+static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
+			  const struct intel_cdclk_config *cdclk_config,
+			  enum pipe pipe)
+{
+	struct intel_cdclk_config mid_cdclk_config;
+	int cdclk = cdclk_config->cdclk;
+	int ret;
+
+	/* Inform power controller of upcoming frequency change. */
+	if (DISPLAY_VER(dev_priv) >= 11)
+		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
+					SKL_CDCLK_PREPARE_FOR_CHANGE,
+					SKL_CDCLK_READY_FOR_CHANGE,
+					SKL_CDCLK_READY_FOR_CHANGE, 3);
+	else
+		/*
+		 * BSpec requires us to wait up to 150usec, but that leads to
+		 * timeouts; the 2ms used here is based on experiment.
+		 */
+		ret = snb_pcode_write_timeout(&dev_priv->uncore,
+					      HSW_PCODE_DE_WRITE_FREQ_REQ,
+					      0x80000000, 150, 2);
+	if (ret) {
+		drm_err(&dev_priv->drm,
+			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
+			ret, cdclk);
+		return;
+	}
+
+	if (cdclk_crawl_and_squash(dev_priv, &dev_priv->display.cdclk.hw,
+				   cdclk_config, &mid_cdclk_config)) {
+		_bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
+		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+	} else {
+		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+	}
 
 	if (DISPLAY_VER(dev_priv) >= 11) {
 		ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
@@ -1953,6 +2028,27 @@  void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
 		skl_cdclk_uninit_hw(i915);
 }
 
+static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private *i915,
+					     const struct intel_cdclk_config *a,
+					     const struct intel_cdclk_config *b)
+{
+	u16 old_waveform;
+	u16 new_waveform;
+
+	if (a->vco == 0 || b->vco == 0)
+		return false;
+
+	if (HAS_CDCLK_CRAWL(i915) && HAS_CDCLK_SQUASH(i915)) {
+		old_waveform = cdclk_squash_waveform(i915, a->cdclk);
+		new_waveform = cdclk_squash_waveform(i915, b->cdclk);
+	} else {
+		return false;
+	}
+
+	return a->vco != b->vco &&
+	       old_waveform != new_waveform;
+}
+
 static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
 				  const struct intel_cdclk_config *a,
 				  const struct intel_cdclk_config *b)
@@ -2759,9 +2855,14 @@  int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
 			pipe = INVALID_PIPE;
 	}
 
-	if (intel_cdclk_can_squash(dev_priv,
-				   &old_cdclk_state->actual,
-				   &new_cdclk_state->actual)) {
+	if (intel_cdclk_can_crawl_and_squash(dev_priv,
+					     &old_cdclk_state->actual,
+					     &new_cdclk_state->actual)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "Can change cdclk via crawling and squashing\n");
+	} else if (intel_cdclk_can_squash(dev_priv,
+					&old_cdclk_state->actual,
+					&new_cdclk_state->actual)) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "Can change cdclk via squashing\n");
 	} else if (intel_cdclk_can_crawl(dev_priv,