@@ -216,6 +216,10 @@
#define C20_MPLLA_TX_CLK_DIV_MASK REG_GENMASK(10, 8)
#define C20_FB_CLK_DIV4_EN REG_BIT(13)
+/* C20 Phy VSwing Masks */
+#define C20_PHY_VSWING_PREEMPH_MASK REG_GENMASK8(5, 0)
+#define C20_PHY_VSWING_PREEMPH(val) REG_FIELD_PREP8(C20_PHY_VSWING_PREEMPH_MASK, val)
+
#define RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(idx) (0x303D + (idx))
#endif /* __INTEL_CX0_PHY_REGS_H__ */
@@ -9,6 +9,7 @@
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_dp.h"
+#include "intel_cx0_phy.h"
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
@@ -1059,6 +1060,46 @@ static const struct intel_ddi_buf_trans mtl_cx0_trans = {
.hdmi_default_entry = ARRAY_SIZE(_mtl_c10_trans_dp14) - 1,
};
+/* HDMI2.0 */
+static const union intel_ddi_buf_trans_entry _mtl_c20_trans_hdmi[] = {
+ { .snps = { 48, 0, 0 } }, /* preset 0 */
+ { .snps = { 38, 4, 6 } }, /* preset 1 */
+ { .snps = { 36, 4, 8 } }, /* preset 2 */
+ { .snps = { 34, 4, 10 } }, /* preset 3 */
+ { .snps = { 32, 4, 12 } }, /* preset 4 */
+};
+
+static const struct intel_ddi_buf_trans mtl_c20_trans_hdmi = {
+ .entries = _mtl_c20_trans_hdmi,
+ .num_entries = ARRAY_SIZE(_mtl_c20_trans_hdmi),
+ .hdmi_default_entry = 0,
+};
+
+/* DP2.0 */
+static const union intel_ddi_buf_trans_entry _mtl_c20_trans_uhbr[] = {
+ { .snps = { 48, 0, 0 } }, /* preset 0 */
+ { .snps = { 43, 0, 5 } }, /* preset 1 */
+ { .snps = { 40, 0, 8 } }, /* preset 2 */
+ { .snps = { 37, 0, 11 } }, /* preset 3 */
+ { .snps = { 33, 0, 15 } }, /* preset 4 */
+ { .snps = { 46, 2, 0 } }, /* preset 5 */
+ { .snps = { 42, 2, 4 } }, /* preset 6 */
+ { .snps = { 38, 2, 8 } }, /* preset 7 */
+ { .snps = { 35, 2, 11 } }, /* preset 8 */
+ { .snps = { 33, 2, 13 } }, /* preset 9 */
+ { .snps = { 44, 4, 0 } }, /* preset 10 */
+ { .snps = { 40, 4, 4 } }, /* preset 11 */
+ { .snps = { 37, 4, 7 } }, /* preset 12 */
+ { .snps = { 33, 4, 11 } }, /* preset 13 */
+ { .snps = { 40, 8, 0 } }, /* preset 14 */
+ { .snps = { 28, 2, 2 } }, /* preset 15 */
+};
+
+static const struct intel_ddi_buf_trans mtl_c20_trans_uhbr = {
+ .entries = _mtl_c20_trans_uhbr,
+ .num_entries = ARRAY_SIZE(_mtl_c20_trans_uhbr),
+};
+
bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)
{
return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
@@ -1635,7 +1676,15 @@ mtl_get_cx0_buf_trans(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
int *n_entries)
{
- return intel_get_buf_trans(&mtl_cx0_trans, n_entries);
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+ enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+ if (intel_crtc_has_dp_encoder(crtc_state) && crtc_state->port_clock > 1000000)
+ return intel_get_buf_trans(&mtl_c20_trans_uhbr, n_entries);
+ else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) && !(intel_is_c10phy(i915, phy)))
+ return intel_get_buf_trans(&mtl_c20_trans_hdmi, n_entries);
+ else
+ return intel_get_buf_trans(&mtl_cx0_trans, n_entries);
}
void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
DP1.4 and DP20 voltage swing sequence for C20 phy. Bspec: 65449, 67636, 67610 v2: DP2.0 Tx Eq tables has been updated in BSpec. Update also the driver code as per BSpec 65449 Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> --- .../gpu/drm/i915/display/intel_cx0_phy_regs.h | 4 ++ .../drm/i915/display/intel_ddi_buf_trans.c | 51 ++++++++++++++++++- 2 files changed, 54 insertions(+), 1 deletion(-)