@@ -226,6 +226,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
int i, ret, recv_bytes;
int try, clock = 0;
u32 status;
+ u32 send_ctl;
bool vdd;
ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp);
@@ -273,30 +274,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
* it using the same AUX CH simultaneously
*/
- /* Try to wait for any previous AUX channel activity */
- for (try = 0; try < 3; try++) {
- status = intel_de_read_notrace(i915, ch_ctl);
- if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
- break;
- msleep(1);
- }
- /* just trace the final value */
- trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
-
- if (try == 3) {
- const u32 status = intel_de_read(i915, ch_ctl);
-
- if (status != intel_dp->aux_busy_last_status) {
- drm_WARN(&i915->drm, 1,
- "%s: not started (status 0x%08x)\n",
- intel_dp->aux.name, status);
- intel_dp->aux_busy_last_status = status;
- }
-
- ret = -EBUSY;
- goto out;
- }
-
/* Only 5 data registers! */
if (drm_WARN_ON(&i915->drm, send_bytes > 20 || recv_size > 20)) {
ret = -E2BIG;
@@ -304,14 +281,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
}
while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) {
- u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
- send_bytes,
- aux_clock_divider);
+ /* FIXME: Must try at least 3 times according to DP spec */
+ for (try = 0; try < 5; try++) {
+ send_ctl = intel_dp->get_aux_send_ctl(intel_dp,
+ send_bytes,
+ aux_clock_divider);
+ send_ctl |= aux_send_ctl_flags;
- send_ctl |= aux_send_ctl_flags;
+ /* Try to wait for any previous AUX channel activity */
+ status = intel_dp_aux_wait_done(intel_dp);
+ /* just trace the final value */
+ trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true);
+
+ if (status & DP_AUX_CH_CTL_SEND_BUSY) {
+ drm_WARN(&i915->drm, 1,
+ "%s: not started, previous Tx still in process (status 0x%08x)\n",
+ intel_dp->aux.name, status);
+ intel_dp->aux_busy_last_status = status;
+ if (try > 3) {
+ ret = -EBUSY;
+ goto out;
+ } else {
+ continue;
+ }
+ }
- /* Must try at least 3 times according to DP spec */
- for (try = 0; try < 5; try++) {
/* Load the send data into the aux channel data registers */
for (i = 0; i < send_bytes; i += 4)
intel_de_write(i915, ch_data[i >> 2],
@@ -321,6 +315,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,
/* Send the command and wait for it to complete */
intel_de_write(i915, ch_ctl, send_ctl);
+ /* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for both cases */
status = intel_dp_aux_wait_done(intel_dp);
/* Clear done status and any errors */
At the beginning of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register. On each of these 3 trials a check for busy has to be done so as to start freshly. v2: updated the commit message v4: check for SEND_BUSY after write (Imre) v5: reverted the send_ctl to the while loop (Jani) Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> --- drivers/gpu/drm/i915/display/intel_dp_aux.c | 55 ++++++++++----------- 1 file changed, 25 insertions(+), 30 deletions(-)