@@ -630,7 +630,7 @@ static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
return true;
}
-int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
+void intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
int link_rate, u8 lane_count)
{
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
@@ -638,18 +638,23 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
/*
* TODO: Enable fallback on MST links once MST link compute can handle
- * the fallback params.
+ * the fallback params. For now, similar to the SST case, ensure all of
+ * the base connector's modes are pruned in the next connector probe by
+ * effectively reducing its bandwidth to 0 so userspace can ignore it
+ * within the next modeset attempt.
*/
if (intel_dp->is_mst) {
drm_err(&i915->drm, "Link Training Unsuccessful\n");
- return -1;
+ intel_dp->max_link_rate = 0;
+ intel_dp->max_link_lane_count = 0;
+ return;
}
if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) {
drm_dbg_kms(&i915->drm,
"Retrying Link training for eDP with max parameters\n");
intel_dp->use_max_params = true;
- return 0;
+ return;
}
index = intel_dp_rate_index(intel_dp->common_rates,
@@ -662,7 +667,7 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
lane_count)) {
drm_dbg_kms(&i915->drm,
"Retrying Link training for eDP with same parameters\n");
- return 0;
+ return;
}
intel_dp->max_link_rate = intel_dp_common_rate(intel_dp, index - 1);
intel_dp->max_link_lane_count = lane_count;
@@ -673,7 +678,7 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
lane_count >> 1)) {
drm_dbg_kms(&i915->drm,
"Retrying Link training for eDP with same parameters\n");
- return 0;
+ return;
}
intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
intel_dp->max_link_lane_count = lane_count >> 1;
@@ -686,10 +691,7 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
*/
intel_dp->max_link_rate = 0;
intel_dp->max_link_lane_count = 0;
- return 0;
}
-
- return 0;
}
u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
@@ -5310,10 +5312,11 @@ intel_dp_detect(struct drm_connector *connector,
intel_dp_configure_mst(intel_dp);
/*
- * TODO: Reset link params when switching to MST mode, until MST
- * supports link training fallback params.
+ * Note: Even though MST link training fallback is not yet implemented,
+ * do not reset. This is because the base connector needs to have all
+ * its modes pruned when link training for the MST port fails.
*/
- if (intel_dp->reset_link_params || intel_dp->is_mst) {
+ if (intel_dp->reset_link_params) {
intel_dp_reset_max_link_params(intel_dp);
intel_dp->reset_link_params = false;
}
@@ -40,7 +40,7 @@ bool intel_dp_init_connector(struct intel_digital_port *dig_port,
struct intel_connector *intel_connector);
void intel_dp_set_link_params(struct intel_dp *intel_dp,
int link_rate, int lane_count);
-int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
+void intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
int link_rate, u8 lane_count);
int intel_dp_get_active_pipes(struct intel_dp *intel_dp,
struct drm_modeset_acquire_ctx *ctx,
@@ -1075,10 +1075,10 @@ static void intel_dp_schedule_fallback_link_training(struct intel_dp *intel_dp,
lt_dbg(intel_dp, DP_PHY_DPRX,
"Link Training failed with HOBL active, not enabling it from now on\n");
intel_dp->hobl_failed = true;
- } else if (intel_dp_get_link_train_fallback_values(intel_dp,
- crtc_state->port_clock,
- crtc_state->lane_count)) {
- return;
+ } else {
+ intel_dp_get_link_train_fallback_values(intel_dp,
+ crtc_state->port_clock,
+ crtc_state->lane_count);
}
/* Schedule a Hotplug Uevent to userspace to start modeset */
Currently, MST link training has no fallback. This means that if an MST base connector fails to link-train once, the training completely fails, which makes this case significantly more common than a complete SST link training failure. Similar to the final failure state of SST, this patch zeros out both max_link_rate and max_link_lane_count. In addition, it stops resetting MST params so the zeroing of the HBR fields stick. This ensures that the MST base connector's modes will be completely pruned, since it is effectively left with 0Gbps bandwidth. Signed-off-by: Gil Dekel <gildekel@chromium.org> --- drivers/gpu/drm/i915/display/intel_dp.c | 27 ++++++++++--------- drivers/gpu/drm/i915/display/intel_dp.h | 2 +- .../drm/i915/display/intel_dp_link_training.c | 8 +++--- 3 files changed, 20 insertions(+), 17 deletions(-) -- Gil Dekel, Software Engineer, Google / ChromeOS Display and Graphics