@@ -6804,7 +6804,7 @@ static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder,
max_bpc);
bpp = convert_dc_color_depth_into_bpc(color_depth) * 3;
clock = adjusted_mode->clock;
- dm_new_connector_state->pbn = drm_dp_calc_pbn_mode(clock, bpp, false);
+ dm_new_connector_state->pbn = drm_dp_calc_pbn_mode(clock, bpp << 4);
}
dm_new_connector_state->vcpi_slots =
@@ -1636,7 +1636,7 @@ enum dc_status dm_dp_mst_is_port_support_mode(
} else {
/* check if mode could be supported within full_pbn */
bpp = convert_dc_color_depth_into_bpc(stream->timing.display_color_depth) * 3;
- pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp, false);
+ pbn = drm_dp_calc_pbn_mode(stream->timing.pix_clk_100hz / 10, bpp << 4);
if (pbn > aconnector->mst_output_port->full_pbn)
return DC_FAIL_BANDWIDTH_VALIDATE;
@@ -4719,13 +4719,12 @@ EXPORT_SYMBOL(drm_dp_check_act_status);
/**
* drm_dp_calc_pbn_mode() - Calculate the PBN for a mode.
- * @clock: dot clock for the mode
- * @bpp: bpp for the mode.
- * @dsc: DSC mode. If true, bpp has units of 1/16 of a bit per pixel
+ * @clock: dot clock
+ * @bpp: bpp as .4 binary fixed point
*
* This uses the formula in the spec to calculate the PBN value for a mode.
*/
-int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
+int drm_dp_calc_pbn_mode(int clock, int bpp)
{
/*
* margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
@@ -4736,18 +4735,9 @@ int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
* peak_kbps *= (1006/1000)
* peak_kbps *= (64/54)
* peak_kbps *= 8 convert to bytes
- *
- * If the bpp is in units of 1/16, further divide by 16. Put this
- * factor in the numerator rather than the denominator to avoid
- * integer overflow
*/
-
- if (dsc)
- return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
- 8 * 54 * 1000 * 1000);
-
- return DIV_ROUND_UP_ULL(mul_u32_u32(clock * bpp, 64 * 1006),
- 8 * 54 * 1000 * 1000);
+ return DIV_ROUND_UP_ULL(mul_u32_u32(clock * bpp, 64 * 1006 >> 4),
+ 1000 * 8 * 54 * 1000);
}
EXPORT_SYMBOL(drm_dp_calc_pbn_mode);
@@ -109,8 +109,7 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
continue;
crtc_state->pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock,
- dsc ? bpp << 4 : bpp,
- dsc);
+ bpp << 4);
slots = drm_dp_atomic_find_time_slots(state, &intel_dp->mst_mgr,
connector->port,
@@ -976,7 +975,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
return ret;
if (mode_rate > max_rate || mode->clock > max_dotclk ||
- drm_dp_calc_pbn_mode(mode->clock, min_bpp, false) > port->full_pbn) {
+ drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port->full_pbn) {
*status = MODE_CLOCK_HIGH;
return 0;
}
@@ -967,8 +967,7 @@ nv50_msto_atomic_check(struct drm_encoder *encoder,
const int clock = crtc_state->adjusted_mode.clock;
asyh->or.bpc = connector->display_info.bpc;
- asyh->dp.pbn = drm_dp_calc_pbn_mode(clock, asyh->or.bpc * 3,
- false);
+ asyh->dp.pbn = drm_dp_calc_pbn_mode(clock, asyh->or.bpc * 3 << 4);
}
mst_state = drm_atomic_get_mst_topology_state(state, &mstm->mgr);
@@ -42,13 +42,13 @@ static const struct drm_dp_mst_calc_pbn_mode_test drm_dp_mst_calc_pbn_mode_cases
.clock = 332880,
.bpp = 24,
.dsc = true,
- .expected = 50
+ .expected = 1191
},
{
.clock = 324540,
.bpp = 24,
.dsc = true,
- .expected = 49
+ .expected = 1161
},
};
@@ -56,7 +56,7 @@ static void drm_test_dp_mst_calc_pbn_mode(struct kunit *test)
{
const struct drm_dp_mst_calc_pbn_mode_test *params = test->param_value;
- KUNIT_EXPECT_EQ(test, drm_dp_calc_pbn_mode(params->clock, params->bpp, params->dsc),
+ KUNIT_EXPECT_EQ(test, drm_dp_calc_pbn_mode(params->clock, params->bpp << 4),
params->expected);
}
@@ -842,7 +842,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector,
int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
int link_rate, int link_lane_count);
-int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc);
+int drm_dp_calc_pbn_mode(int clock, int bpp);
void drm_dp_mst_update_slots(struct drm_dp_mst_topology_state *mst_state, uint8_t link_encoding_cap);