diff mbox series

drm/i915: Remove the module parameter 'fastboot'

Message ID 20230926091157.635438-1-arun.r.murthy@intel.com (mailing list archive)
State New, archived
Headers show
Series drm/i915: Remove the module parameter 'fastboot' | expand

Commit Message

Arun R Murthy Sept. 26, 2023, 9:11 a.m. UTC
By default fastboot is enabled on all Display 9+ platforms and disabled
on older platforms. Its not necessary to retain this as a module
parameter.

Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 3 ---
 drivers/gpu/drm/i915/i915_params.c           | 5 -----
 drivers/gpu/drm/i915/i915_params.h           | 1 -
 3 files changed, 9 deletions(-)

Comments

Jani Nikula Sept. 26, 2023, 9:40 a.m. UTC | #1
On Tue, 26 Sep 2023, Arun R Murthy <arun.r.murthy@intel.com> wrote:
> By default fastboot is enabled on all Display 9+ platforms and disabled
> on older platforms. Its not necessary to retain this as a module
> parameter.

Cc: Ville

Acked-by: Jani Nikula <jani.nikula@intel.com>

>
> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 3 ---
>  drivers/gpu/drm/i915/i915_params.c           | 5 -----
>  drivers/gpu/drm/i915/i915_params.h           | 1 -
>  3 files changed, 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index edbcf5968804..9d6e2d19d636 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4986,9 +4986,6 @@ pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
>  
>  static bool fastboot_enabled(struct drm_i915_private *dev_priv)
>  {
> -	if (dev_priv->params.fastboot != -1)
> -		return dev_priv->params.fastboot;
> -
>  	/* Enable fastboot by default on Skylake and newer */
>  	if (DISPLAY_VER(dev_priv) >= 9)
>  		return true;
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index 0a171b57fd8f..036c4c3ed6ed 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -137,11 +137,6 @@ i915_param_named_unsafe(enable_ips, int, 0400, "Enable IPS (default: true)");
>  i915_param_named_unsafe(enable_dpt, bool, 0400,
>  	"Enable display page table (DPT) (default: true)");
>  
> -i915_param_named(fastboot, int, 0400,
> -	"Try to skip unnecessary mode sets at boot time "
> -	"(0=disabled, 1=enabled) "
> -	"Default: -1 (use per-chip default)");
> -
>  i915_param_named_unsafe(load_detect_test, bool, 0400,
>  	"Force-enable the VGA load detect code for testing (default:false). "
>  	"For developers only.");
> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
> index 68abf0ad6c00..d5194b039aab 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -72,7 +72,6 @@ struct drm_printer;
>  	param(int, edp_vswing, 0, 0400) \
>  	param(unsigned int, reset, 3, 0600) \
>  	param(unsigned int, inject_probe_failure, 0, 0) \
> -	param(int, fastboot, -1, 0600) \
>  	param(int, enable_dpcd_backlight, -1, 0600) \
>  	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE, 0400) \
>  	param(unsigned int, request_timeout_ms, CONFIG_DRM_I915_REQUEST_TIMEOUT, CONFIG_DRM_I915_REQUEST_TIMEOUT ? 0600 : 0) \
Ville Syrjala Sept. 27, 2023, 12:58 p.m. UTC | #2
On Tue, Sep 26, 2023 at 02:41:57PM +0530, Arun R Murthy wrote:
> By default fastboot is enabled on all Display 9+ platforms and disabled
> on older platforms. Its not necessary to retain this as a module
> parameter.
> 
> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 3 ---
>  drivers/gpu/drm/i915/i915_params.c           | 5 -----
>  drivers/gpu/drm/i915/i915_params.h           | 1 -
>  3 files changed, 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index edbcf5968804..9d6e2d19d636 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4986,9 +4986,6 @@ pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
>  
>  static bool fastboot_enabled(struct drm_i915_private *dev_priv)
>  {
> -	if (dev_priv->params.fastboot != -1)
> -		return dev_priv->params.fastboot;
> -
>  	/* Enable fastboot by default on Skylake and newer */
>  	if (DISPLAY_VER(dev_priv) >= 9)
>  		return true;

I'd like to see a patch to eliminate fastboot_enabled() and associated
logic entirely. Could be a separate patch I suppose.

> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index 0a171b57fd8f..036c4c3ed6ed 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -137,11 +137,6 @@ i915_param_named_unsafe(enable_ips, int, 0400, "Enable IPS (default: true)");
>  i915_param_named_unsafe(enable_dpt, bool, 0400,
>  	"Enable display page table (DPT) (default: true)");
>  
> -i915_param_named(fastboot, int, 0400,
> -	"Try to skip unnecessary mode sets at boot time "
> -	"(0=disabled, 1=enabled) "
> -	"Default: -1 (use per-chip default)");
> -
>  i915_param_named_unsafe(load_detect_test, bool, 0400,
>  	"Force-enable the VGA load detect code for testing (default:false). "
>  	"For developers only.");
> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
> index 68abf0ad6c00..d5194b039aab 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -72,7 +72,6 @@ struct drm_printer;
>  	param(int, edp_vswing, 0, 0400) \
>  	param(unsigned int, reset, 3, 0600) \
>  	param(unsigned int, inject_probe_failure, 0, 0) \
> -	param(int, fastboot, -1, 0600) \
>  	param(int, enable_dpcd_backlight, -1, 0600) \
>  	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE, 0400) \
>  	param(unsigned int, request_timeout_ms, CONFIG_DRM_I915_REQUEST_TIMEOUT, CONFIG_DRM_I915_REQUEST_TIMEOUT ? 0600 : 0) \
> -- 
> 2.25.1
Arun R Murthy Sept. 27, 2023, 2:30 p.m. UTC | #3
> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Wednesday, September 27, 2023 6:28 PM
> To: Murthy, Arun R <arun.r.murthy@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [Intel-gfx] [PATCH] drm/i915: Remove the module parameter
> 'fastboot'
> 
> On Tue, Sep 26, 2023 at 02:41:57PM +0530, Arun R Murthy wrote:
> > By default fastboot is enabled on all Display 9+ platforms and
> > disabled on older platforms. Its not necessary to retain this as a
> > module parameter.
> >
> > Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 3 ---
> >  drivers/gpu/drm/i915/i915_params.c           | 5 -----
> >  drivers/gpu/drm/i915/i915_params.h           | 1 -
> >  3 files changed, 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index edbcf5968804..9d6e2d19d636 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -4986,9 +4986,6 @@ pipe_config_mismatch(bool fastset, const struct
> > intel_crtc *crtc,
> >
> >  static bool fastboot_enabled(struct drm_i915_private *dev_priv)  {
> > -	if (dev_priv->params.fastboot != -1)
> > -		return dev_priv->params.fastboot;
> > -
> >  	/* Enable fastboot by default on Skylake and newer */
> >  	if (DISPLAY_VER(dev_priv) >= 9)
> >  		return true;
> 
> I'd like to see a patch to eliminate fastboot_enabled() and associated logic
> entirely. Could be a separate patch I suppose.
> 
Sure will take it up separately.

Thanks and Regards,
Arun R Murthy
--------------------
> > diff --git a/drivers/gpu/drm/i915/i915_params.c
> > b/drivers/gpu/drm/i915/i915_params.c
> > index 0a171b57fd8f..036c4c3ed6ed 100644
> > --- a/drivers/gpu/drm/i915/i915_params.c
> > +++ b/drivers/gpu/drm/i915/i915_params.c
> > @@ -137,11 +137,6 @@ i915_param_named_unsafe(enable_ips, int, 0400,
> > "Enable IPS (default: true)");  i915_param_named_unsafe(enable_dpt, bool,
> 0400,
> >  	"Enable display page table (DPT) (default: true)");
> >
> > -i915_param_named(fastboot, int, 0400,
> > -	"Try to skip unnecessary mode sets at boot time "
> > -	"(0=disabled, 1=enabled) "
> > -	"Default: -1 (use per-chip default)");
> > -
> >  i915_param_named_unsafe(load_detect_test, bool, 0400,
> >  	"Force-enable the VGA load detect code for testing (default:false). "
> >  	"For developers only.");
> > diff --git a/drivers/gpu/drm/i915/i915_params.h
> > b/drivers/gpu/drm/i915/i915_params.h
> > index 68abf0ad6c00..d5194b039aab 100644
> > --- a/drivers/gpu/drm/i915/i915_params.h
> > +++ b/drivers/gpu/drm/i915/i915_params.h
> > @@ -72,7 +72,6 @@ struct drm_printer;
> >  	param(int, edp_vswing, 0, 0400) \
> >  	param(unsigned int, reset, 3, 0600) \
> >  	param(unsigned int, inject_probe_failure, 0, 0) \
> > -	param(int, fastboot, -1, 0600) \
> >  	param(int, enable_dpcd_backlight, -1, 0600) \
> >  	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE, 0400) \
> >  	param(unsigned int, request_timeout_ms,
> > CONFIG_DRM_I915_REQUEST_TIMEOUT,
> CONFIG_DRM_I915_REQUEST_TIMEOUT ?
> > 0600 : 0) \
> > --
> > 2.25.1
> 
> --
> Ville Syrjälä
> Intel
Shankar, Uma Oct. 12, 2023, 7:20 a.m. UTC | #4
> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@lists.freedesktop.org> On Behalf Of Arun R
> Murthy
> Sent: Tuesday, September 26, 2023 2:42 PM
> To: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: [Intel-gfx] [PATCH] drm/i915: Remove the module parameter 'fastboot'
> 
> By default fastboot is enabled on all Display 9+ platforms and disabled on older
> platforms. Its not necessary to retain this as a module parameter.

Pushed to drm-intel-next. Thanks for the patch and reviews.
@Arun R Murthy Please work on the follow-up patch as highlighted by Ville.

Regards,
Uma Shankar

> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 3 ---
>  drivers/gpu/drm/i915/i915_params.c           | 5 -----
>  drivers/gpu/drm/i915/i915_params.h           | 1 -
>  3 files changed, 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index edbcf5968804..9d6e2d19d636 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4986,9 +4986,6 @@ pipe_config_mismatch(bool fastset, const struct
> intel_crtc *crtc,
> 
>  static bool fastboot_enabled(struct drm_i915_private *dev_priv)  {
> -	if (dev_priv->params.fastboot != -1)
> -		return dev_priv->params.fastboot;
> -
>  	/* Enable fastboot by default on Skylake and newer */
>  	if (DISPLAY_VER(dev_priv) >= 9)
>  		return true;
> diff --git a/drivers/gpu/drm/i915/i915_params.c
> b/drivers/gpu/drm/i915/i915_params.c
> index 0a171b57fd8f..036c4c3ed6ed 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -137,11 +137,6 @@ i915_param_named_unsafe(enable_ips, int, 0400,
> "Enable IPS (default: true)");  i915_param_named_unsafe(enable_dpt, bool, 0400,
>  	"Enable display page table (DPT) (default: true)");
> 
> -i915_param_named(fastboot, int, 0400,
> -	"Try to skip unnecessary mode sets at boot time "
> -	"(0=disabled, 1=enabled) "
> -	"Default: -1 (use per-chip default)");
> -
>  i915_param_named_unsafe(load_detect_test, bool, 0400,
>  	"Force-enable the VGA load detect code for testing (default:false). "
>  	"For developers only.");
> diff --git a/drivers/gpu/drm/i915/i915_params.h
> b/drivers/gpu/drm/i915/i915_params.h
> index 68abf0ad6c00..d5194b039aab 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -72,7 +72,6 @@ struct drm_printer;
>  	param(int, edp_vswing, 0, 0400) \
>  	param(unsigned int, reset, 3, 0600) \
>  	param(unsigned int, inject_probe_failure, 0, 0) \
> -	param(int, fastboot, -1, 0600) \
>  	param(int, enable_dpcd_backlight, -1, 0600) \
>  	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE, 0400) \
>  	param(unsigned int, request_timeout_ms,
> CONFIG_DRM_I915_REQUEST_TIMEOUT,
> CONFIG_DRM_I915_REQUEST_TIMEOUT ? 0600 : 0) \
> --
> 2.25.1
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index edbcf5968804..9d6e2d19d636 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4986,9 +4986,6 @@  pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
 
 static bool fastboot_enabled(struct drm_i915_private *dev_priv)
 {
-	if (dev_priv->params.fastboot != -1)
-		return dev_priv->params.fastboot;
-
 	/* Enable fastboot by default on Skylake and newer */
 	if (DISPLAY_VER(dev_priv) >= 9)
 		return true;
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 0a171b57fd8f..036c4c3ed6ed 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -137,11 +137,6 @@  i915_param_named_unsafe(enable_ips, int, 0400, "Enable IPS (default: true)");
 i915_param_named_unsafe(enable_dpt, bool, 0400,
 	"Enable display page table (DPT) (default: true)");
 
-i915_param_named(fastboot, int, 0400,
-	"Try to skip unnecessary mode sets at boot time "
-	"(0=disabled, 1=enabled) "
-	"Default: -1 (use per-chip default)");
-
 i915_param_named_unsafe(load_detect_test, bool, 0400,
 	"Force-enable the VGA load detect code for testing (default:false). "
 	"For developers only.");
diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index 68abf0ad6c00..d5194b039aab 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -72,7 +72,6 @@  struct drm_printer;
 	param(int, edp_vswing, 0, 0400) \
 	param(unsigned int, reset, 3, 0600) \
 	param(unsigned int, inject_probe_failure, 0, 0) \
-	param(int, fastboot, -1, 0600) \
 	param(int, enable_dpcd_backlight, -1, 0600) \
 	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE, 0400) \
 	param(unsigned int, request_timeout_ms, CONFIG_DRM_I915_REQUEST_TIMEOUT, CONFIG_DRM_I915_REQUEST_TIMEOUT ? 0600 : 0) \