@@ -40,6 +40,7 @@
#include "intel_psr.h"
#include "intel_vdsc.h"
#include "skl_watermark.h"
+#include "skl_watermark_regs.h"
#include "vlv_sideband.h"
/**
@@ -1683,6 +1684,8 @@ static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
}
out:
+ if (DISPLAY_VER(dev_priv) >= 20)
+ cdclk_config->joined_mbus = intel_de_read(dev_priv, MBUS_CTL) & MBUS_JOIN;
/*
* Can't read this out :( Let's assume it's
* at least what the CDCLK frequency requires.
@@ -1900,6 +1903,14 @@ u8 intel_mdclk_cdclk_ratio(struct drm_i915_private *i915,
return 2;
}
+static void xe2lpd_mdclk_cdclk_ratio_program(struct drm_i915_private *i915,
+ const struct intel_cdclk_config *cdclk_config)
+{
+ intel_dbuf_mdclk_cdclk_ratio_update(i915,
+ intel_mdclk_cdclk_ratio(i915, cdclk_config),
+ cdclk_config->joined_mbus);
+}
+
static bool cdclk_compute_crawl_and_squash_midpoint(struct drm_i915_private *i915,
const struct intel_cdclk_config *old_cdclk_config,
const struct intel_cdclk_config *new_cdclk_config,
@@ -2080,6 +2091,9 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
return;
}
+ if (DISPLAY_VER(dev_priv) >= 20 && cdclk < dev_priv->display.cdclk.hw.cdclk)
+ xe2lpd_mdclk_cdclk_ratio_program(dev_priv, cdclk_config);
+
if (cdclk_compute_crawl_and_squash_midpoint(dev_priv, &dev_priv->display.cdclk.hw,
cdclk_config, &mid_cdclk_config)) {
_bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
@@ -2088,6 +2102,9 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
}
+ if (DISPLAY_VER(dev_priv) >= 20 && cdclk > dev_priv->display.cdclk.hw.cdclk)
+ xe2lpd_mdclk_cdclk_ratio_program(dev_priv, cdclk_config);
+
if (DISPLAY_VER(dev_priv) >= 14)
/*
* NOOP - No Pcode communication needed for
@@ -3170,6 +3187,20 @@ int intel_cdclk_atomic_check(struct intel_atomic_state *state,
return 0;
}
+int intel_cdclk_state_set_joined_mbus(struct intel_atomic_state *state, bool joined_mbus)
+{
+ struct intel_cdclk_state *cdclk_state;
+
+ cdclk_state = intel_atomic_get_cdclk_state(state);
+ if (IS_ERR(cdclk_state))
+ return PTR_ERR(cdclk_state);
+
+ cdclk_state->actual.joined_mbus = joined_mbus;
+ cdclk_state->logical.joined_mbus = joined_mbus;
+
+ return intel_atomic_lock_global_state(&cdclk_state->base);
+}
+
int intel_cdclk_init(struct drm_i915_private *dev_priv)
{
struct intel_cdclk_state *cdclk_state;
@@ -18,6 +18,8 @@ struct intel_crtc_state;
struct intel_cdclk_config {
unsigned int cdclk, vco, ref, bypass;
u8 voltage_level;
+ /* This field is only valid for Xe2LPD and above. */
+ bool joined_mbus;
};
struct intel_cdclk_state {
@@ -74,6 +76,7 @@ void intel_cdclk_get_cdclk(struct drm_i915_private *dev_priv,
struct intel_cdclk_config *cdclk_config);
int intel_cdclk_atomic_check(struct intel_atomic_state *state,
bool *need_cdclk_calc);
+int intel_cdclk_state_set_joined_mbus(struct intel_atomic_state *state, bool joined_mbus);
struct intel_cdclk_state *
intel_atomic_get_cdclk_state(struct intel_atomic_state *state);
@@ -12,6 +12,7 @@
#include "intel_atomic.h"
#include "intel_atomic_plane.h"
#include "intel_bw.h"
+#include "intel_cdclk.h"
#include "intel_crtc.h"
#include "intel_de.h"
#include "intel_display.h"
@@ -2601,10 +2602,17 @@ skl_compute_ddb(struct intel_atomic_state *state)
return ret;
}
- if (HAS_MBUS_JOINING(i915))
+ if (HAS_MBUS_JOINING(i915)) {
new_dbuf_state->joined_mbus =
adlp_check_mbus_joined(new_dbuf_state->active_pipes);
+ if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
+ ret = intel_cdclk_state_set_joined_mbus(state, new_dbuf_state->joined_mbus);
+ if (ret)
+ return ret;
+ }
+ }
+
for_each_intel_crtc(&i915->drm, crtc) {
enum pipe pipe = crtc->pipe;
@@ -3545,12 +3553,14 @@ int intel_dbuf_state_set_mdclk_cdclk_ratio(struct intel_atomic_state *state, u8
return intel_atomic_lock_global_state(&dbuf_state->base);
}
-static void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915,
- u8 ratio,
- bool joined_mbus)
+void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915, u8 ratio, bool joined_mbus)
{
enum dbuf_slice slice;
+ if (DISPLAY_VER(i915) >= 20)
+ intel_de_rmw(i915, MBUS_CTL, MBUS_TRANSLATION_THROTTLE_MIN_MASK,
+ MBUS_TRANSLATION_THROTTLE_MIN(ratio - 1));
+
if (joined_mbus)
ratio *= 2;
@@ -3568,7 +3578,9 @@ static void update_mbus_pre_enable(struct intel_atomic_state *state)
{
struct drm_i915_private *i915 = to_i915(state->base.dev);
u32 mbus_ctl;
- const struct intel_dbuf_state *dbuf_state =
+ const struct intel_dbuf_state *old_dbuf_state =
+ intel_atomic_get_old_dbuf_state(state);
+ const struct intel_dbuf_state *new_dbuf_state =
intel_atomic_get_new_dbuf_state(state);
if (!HAS_MBUS_JOINING(i915))
@@ -3578,7 +3590,7 @@ static void update_mbus_pre_enable(struct intel_atomic_state *state)
* TODO: Implement vblank synchronized MBUS joining changes.
* Must be properly coordinated with dbuf reprogramming.
*/
- if (dbuf_state->joined_mbus)
+ if (new_dbuf_state->joined_mbus)
mbus_ctl = MBUS_HASHING_MODE_1x4 | MBUS_JOIN |
MBUS_JOIN_PIPE_SELECT_NONE;
else
@@ -3589,8 +3601,20 @@ static void update_mbus_pre_enable(struct intel_atomic_state *state)
MBUS_HASHING_MODE_MASK | MBUS_JOIN |
MBUS_JOIN_PIPE_SELECT_MASK, mbus_ctl);
- intel_dbuf_mdclk_cdclk_ratio_update(i915, dbuf_state->mdclk_cdclk_ratio,
- dbuf_state->joined_mbus);
+ if (DISPLAY_VER(i915) >= 20 &&
+ old_dbuf_state->mdclk_cdclk_ratio != new_dbuf_state->mdclk_cdclk_ratio) {
+ /*
+ * For Xe2LPD and beyond, when there is a change in the ratio
+ * between MDCLK and CDCLK, updates to related registers need to
+ * happen at a specific point in the CDCLK change sequence. In
+ * that case, we defer to the call to
+ * intel_dbuf_mdclk_cdclk_ratio_update() to the CDCLK logic.
+ */
+ return;
+ }
+
+ intel_dbuf_mdclk_cdclk_ratio_update(i915, new_dbuf_state->mdclk_cdclk_ratio,
+ new_dbuf_state->joined_mbus);
}
void intel_dbuf_pre_plane_update(struct intel_atomic_state *state)
@@ -76,6 +76,7 @@ int intel_dbuf_state_set_mdclk_cdclk_ratio(struct intel_atomic_state *state, u8
void intel_dbuf_pre_plane_update(struct intel_atomic_state *state);
void intel_dbuf_post_plane_update(struct intel_atomic_state *state);
+void intel_dbuf_mdclk_cdclk_ratio_update(struct drm_i915_private *i915, u8 ratio, bool joined_mbus);
void intel_mbus_dbox_update(struct intel_atomic_state *state);
#endif /* __SKL_WATERMARK_H__ */
@@ -32,14 +32,16 @@
#define MBUS_BBOX_CTL_S1 _MMIO(0x45040)
#define MBUS_BBOX_CTL_S2 _MMIO(0x45044)
-#define MBUS_CTL _MMIO(0x4438C)
-#define MBUS_JOIN REG_BIT(31)
-#define MBUS_HASHING_MODE_MASK REG_BIT(30)
-#define MBUS_HASHING_MODE_2x2 REG_FIELD_PREP(MBUS_HASHING_MODE_MASK, 0)
-#define MBUS_HASHING_MODE_1x4 REG_FIELD_PREP(MBUS_HASHING_MODE_MASK, 1)
-#define MBUS_JOIN_PIPE_SELECT_MASK REG_GENMASK(28, 26)
-#define MBUS_JOIN_PIPE_SELECT(pipe) REG_FIELD_PREP(MBUS_JOIN_PIPE_SELECT_MASK, pipe)
-#define MBUS_JOIN_PIPE_SELECT_NONE MBUS_JOIN_PIPE_SELECT(7)
+#define MBUS_CTL _MMIO(0x4438C)
+#define MBUS_JOIN REG_BIT(31)
+#define MBUS_HASHING_MODE_MASK REG_BIT(30)
+#define MBUS_HASHING_MODE_2x2 REG_FIELD_PREP(MBUS_HASHING_MODE_MASK, 0)
+#define MBUS_HASHING_MODE_1x4 REG_FIELD_PREP(MBUS_HASHING_MODE_MASK, 1)
+#define MBUS_JOIN_PIPE_SELECT_MASK REG_GENMASK(28, 26)
+#define MBUS_JOIN_PIPE_SELECT(pipe) REG_FIELD_PREP(MBUS_JOIN_PIPE_SELECT_MASK, pipe)
+#define MBUS_JOIN_PIPE_SELECT_NONE MBUS_JOIN_PIPE_SELECT(7)
+#define MBUS_TRANSLATION_THROTTLE_MIN_MASK REG_GENMASK(15, 13)
+#define MBUS_TRANSLATION_THROTTLE_MIN(val) REG_FIELD_PREP(MBUS_TRANSLATION_THROTTLE_MIN_MASK, val)
/* Watermark register definitions for SKL */
#define _CUR_WM_A_0 0x70140
Commit 394b4b7df9f7 ("drm/i915/lnl: Add CDCLK table") and commit 3d3696c0fed1 ("drm/i915/lnl: Start using CDCLK through PLL") started adding support for CDCLK programming support for Xe2LPD. One final piece is missing, which is the programming necessary for changed in the ratio between MDCLK and CDCLK. Let's do that now. BSpec instructs us to update MBUS_CTL and DBUF_CTL_S* registers when the ratio between MDCLK and CDCLK changes. The updates must be done before changing the CDCLK when decreasing the frequency; or after it when increasing the frequency. Ratio-related updates to MBUS_CTL also depend on the state of MBus joining, so they are performed by either CDCLK change sequence or by changes in MBus joining. Since one might happen independently of the other, we need to make sure that both logics see the necessary state values when programming that register. MBus joining logic needs to know the MDCLK:CDCLK ratio and that's already provided via mdclk_cdclk_ratio field of struct intel_dbuf_state. For the CDCLK logic, we need to have something similar: we need to propagate the status of MBus joining to struct intel_cdclk_state. Do that by adding the field joined_mbus to struct intel_cdclk_config. (Preferably, that field would be added to intel_cdclk_state, however currently only intel_cdclk_config is passed down to the functions that do the register programming. We might revisit this decision if we find that refactoring the code to pass the whole intel_cdclk_state is worth it.) Bspec: 68864, 68868, 69090, 69482 Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> --- drivers/gpu/drm/i915/display/intel_cdclk.c | 31 ++++++++++++++ drivers/gpu/drm/i915/display/intel_cdclk.h | 3 ++ drivers/gpu/drm/i915/display/skl_watermark.c | 40 +++++++++++++++---- drivers/gpu/drm/i915/display/skl_watermark.h | 1 + .../gpu/drm/i915/display/skl_watermark_regs.h | 18 +++++---- 5 files changed, 77 insertions(+), 16 deletions(-)