@@ -1721,14 +1721,43 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
enum transcoder cpu_transcoder = intel_dp->psr.transcoder;
struct intel_psr *psr = &intel_dp->psr;
+ u32 alpm_ctl;
if (DISPLAY_VER(dev_priv) < 20)
return;
- intel_de_write(dev_priv, ALPM_CTL(cpu_transcoder),
- ALPM_CTL_EXTENDED_FAST_WAKE_ENABLE |
- ALPM_CTL_ALPM_ENTRY_CHECK(psr->alpm_parameters.check_entry_lines) |
- ALPM_CTL_EXTENDED_FAST_WAKE_TIME(psr->alpm_parameters.fast_wake_lines));
+ /*
+ * Panel Replay on eDP is always using ALPM aux less. I.e. no need to
+ * check panel support at this point.
+ */
+ if (intel_dp->psr.panel_replay_enabled && intel_dp_is_edp(intel_dp)) {
+ alpm_ctl = ALPM_CTL_ALPM_ENABLE |
+ ALPM_CTL_ALPM_AUX_LESS_ENABLE |
+ ALPM_CTL_AUX_LESS_SLEEP_HOLD_TIME_50_SYMBOLS;
+
+ intel_de_write(dev_priv, PORT_ALPM_CTL(cpu_transcoder),
+ PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
+ PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
+ PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
+ PORT_ALPM_CTL_SILENCE_PERIOD(
+ psr->alpm_parameters.silence_period_sym_clocks));
+
+ intel_de_write(dev_priv, PORT_ALPM_LFPS_CTL(cpu_transcoder),
+ PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
+ PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
+ psr->alpm_parameters.lfps_half_cycle_num_of_syms) |
+ PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION(
+ psr->alpm_parameters.lfps_half_cycle_num_of_syms) |
+ PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION(
+ psr->alpm_parameters.lfps_half_cycle_num_of_syms));
+ } else {
+ alpm_ctl = ALPM_CTL_EXTENDED_FAST_WAKE_ENABLE |
+ ALPM_CTL_EXTENDED_FAST_WAKE_TIME(psr->alpm_parameters.fast_wake_lines);
+ }
+
+ alpm_ctl |= ALPM_CTL_ALPM_ENTRY_CHECK(psr->alpm_parameters.check_entry_lines);
+
+ intel_de_write(dev_priv, ALPM_CTL(cpu_transcoder), alpm_ctl);
}
static void intel_psr_enable_source(struct intel_dp *intel_dp,
@@ -1996,6 +2025,16 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp)
intel_snps_phy_update_psr_power_state(&dp_to_dig_port(intel_dp)->base, false);
+ /* Panel Replay on eDP is always using ALPM aux less. */
+ if (intel_dp->psr.panel_replay_enabled && intel_dp_is_edp(intel_dp)) {
+ intel_de_rmw(dev_priv, ALPM_CTL(cpu_transcoder),
+ ALPM_CTL_ALPM_ENABLE |
+ ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0);
+
+ intel_de_rmw(dev_priv, PORT_ALPM_CTL(cpu_transcoder),
+ PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0);
+ }
+
/* Disable PSR on Sink */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
Enable ALPM AUX-Less on source side for Panel Replay eDP. Also write all calculated AUX-Less configuration values accordingly. Enabling it on sink side is in upcoming patch. Bspec: 71477 v5: - mention enable is only on source side in commit message v4: - add comment explaining why AUX less is enabled on eDP panel replay without any extra checks v3: - do not use alpm_ctl as uninitialized variable v2: - do not set AUX-Wake related bits for AUX-Less case - drop switch to active latency - add SLEEP_HOLD_TIME_50_SYMBOLS - add PORT_ALPM_CTL_MAX_PHY_SWING_HOLD Signed-off-by: Jouni Högander <jouni.hogander@intel.com> --- drivers/gpu/drm/i915/display/intel_psr.c | 47 ++++++++++++++++++++++-- 1 file changed, 43 insertions(+), 4 deletions(-)