[03/19] drm/i915/ddi: Move all mso related helpers to a new file

Message ID	20240830050950.2528450-4-ankit.k.nautiyal@intel.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <intel-gfx-bounces@lists.freedesktop.org> From: Ankit Nautiyal <ankit.k.nautiyal@intel.com> To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org Cc: jani.nikula@linux.intel.com, suraj.kandpal@intel.com, ville.syrjala@linux.intel.com Subject: [PATCH 03/19] drm/i915/ddi: Move all mso related helpers to a new file Date: Fri, 30 Aug 2024 10:39:33 +0530 Message-ID: <20240830050950.2528450-4-ankit.k.nautiyal@intel.com> In-Reply-To: <20240830050950.2528450-1-ankit.k.nautiyal@intel.com> References: <20240830050950.2528450-1-ankit.k.nautiyal@intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: list Errors-To: intel-gfx-bounces@lists.freedesktop.org Sender: "Intel-gfx" <intel-gfx-bounces@lists.freedesktop.org>
Series	Consolidation of DSS Control in Separate Files \| expand [00/19] Consolidation of DSS Control in Separate Files [01/19] drm/i915/display: Move all DSS control registers to a new file [02/19] drm/i915/dss_regs: Use REG_* macros for the DSS ctl bits [03/19] drm/i915/ddi: Move all mso related helpers to a new file [04/19] drm/i915/dss: Move to struct intel_display [05/19] drm/i915/icl_dsi: Avoid using intel_dsi in configure_dual_link_mode [06/19] drm/i915/icl_dsi: Use intel_display in configure_dual_link_mode [07/19] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss [08/19] drm/i915/vdsc: Rename helper to check if the pipe supports dsc [09/19] drm/i915/vdsc: Move all dss stuff in dss files [10/19] drm/i915/dss: Use struct intel_display in dss dsc helpers [11/19] drm/i915/display: Move dss stuff in intel_dss files [12/19] drm/i915/display: Rename static functions that use joiner [13/19] drm/i915/display: Separate out joiner stuff in a new file [14/19] drm/i915/display: Move intel_crtc_joined_pipe_mask to intel_joiner [15/19] drm/i915/display: Move helpers for primary joiner to intel_joiner [16/19] drm/i915/display: Move intel_crtc_is_joiner_secondary to intel_joiner [17/19] drm/i915/display: Move intel_crtc_joiner_secondary_pipes to intel_joiner [18/19] drm/i915/joiner: Use struct intel_display in intel_joiner_enabled_pipes [19/19] drm/i915/joiner: Use struct intel_display in intel_joiner_supported_pipes

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index c63fa2133ccb..e55ce8ba123c 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -328,6 +328,7 @@ i915-y += \ display/intel_dsi.o \ display/intel_dsi_dcs_backlight.o \ display/intel_dsi_vbt.o \ + display/intel_dss.o \ display/intel_dvo.o \ display/intel_encoder.o \ display/intel_gmbus.o \ diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 4566a60c981c..7cc766043a5b 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -57,7 +57,7 @@ #include "intel_dp_tunnel.h" #include "intel_dpio_phy.h" #include "intel_dsi.h" -#include "intel_dss_regs.h" +#include "intel_dss.h" #include "intel_encoder.h" #include "intel_fdi.h" #include "intel_fifo_underrun.h" @@ -2349,82 +2349,6 @@ static void intel_ddi_power_up_lanes(struct intel_encoder *encoder, } } -/* - * Splitter enable for eDP MSO is limited to certain pipes, on certain - * platforms. - */ -static u8 intel_ddi_splitter_pipe_mask(struct drm_i915_private *i915) -{ - if (DISPLAY_VER(i915) > 20) - return ~0; - else if (IS_ALDERLAKE_P(i915)) - return BIT(PIPE_A) | BIT(PIPE_B); - else - return BIT(PIPE_A); -} - -static void intel_ddi_mso_get_config(struct intel_encoder *encoder, - struct intel_crtc_state *pipe_config) -{ - struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); - struct drm_i915_private *i915 = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - u32 dss1; - - if (!HAS_MSO(i915)) - return; - - dss1 = intel_de_read(i915, ICL_PIPE_DSS_CTL1(pipe)); - - pipe_config->splitter.enable = dss1 & SPLITTER_ENABLE; - if (!pipe_config->splitter.enable) - return; - - if (drm_WARN_ON(&i915->drm, !(intel_ddi_splitter_pipe_mask(i915) & BIT(pipe)))) { - pipe_config->splitter.enable = false; - return; - } - - switch (dss1 & SPLITTER_CONFIGURATION_MASK) { - default: - drm_WARN(&i915->drm, true, - "Invalid splitter configuration, dss1=0x%08x\n", dss1); - fallthrough; - case SPLITTER_CONFIGURATION_2_SEGMENT: - pipe_config->splitter.link_count = 2; - break; - case SPLITTER_CONFIGURATION_4_SEGMENT: - pipe_config->splitter.link_count = 4; - break; - } - - pipe_config->splitter.pixel_overlap = REG_FIELD_GET(OVERLAP_PIXELS_MASK, dss1); -} - -static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state) -{ - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); - struct drm_i915_private *i915 = to_i915(crtc->base.dev); - enum pipe pipe = crtc->pipe; - u32 dss1 = 0; - - if (!HAS_MSO(i915)) - return; - - if (crtc_state->splitter.enable) { - dss1 |= SPLITTER_ENABLE; - dss1 |= OVERLAP_PIXELS(crtc_state->splitter.pixel_overlap); - if (crtc_state->splitter.link_count == 2) - dss1 |= SPLITTER_CONFIGURATION_2_SEGMENT; - else - dss1 |= SPLITTER_CONFIGURATION_4_SEGMENT; - } - - intel_de_rmw(i915, ICL_PIPE_DSS_CTL1(pipe), - SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK | - OVERLAP_PIXELS_MASK, dss1); -} - static u8 mtl_get_port_width(u8 lane_count) { switch (lane_count) { @@ -2559,7 +2483,7 @@ static void mtl_ddi_pre_enable_dp(struct intel_atomic_state *state, /* * 6.e Program CoG/MSO configuration bits in DSS_CTL1 if selected. */ - intel_ddi_mso_configure(crtc_state); + intel_dss_mso_configure(crtc_state); if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0); @@ -2714,7 +2638,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, /* * 7.g Program CoG/MSO configuration bits in DSS_CTL1 if selected. */ - intel_ddi_mso_configure(crtc_state); + intel_dss_mso_configure(crtc_state); if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0); @@ -3959,7 +3883,7 @@ static void intel_ddi_get_config(struct intel_encoder *encoder, intel_ddi_read_func_ctl(encoder, pipe_config); - intel_ddi_mso_get_config(encoder, pipe_config); + intel_dss_mso_get_config(encoder, pipe_config); pipe_config->has_audio = intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder); @@ -5191,7 +5115,7 @@ void intel_ddi_init(struct intel_display *display, dig_port->hpd_pulse = intel_dp_hpd_pulse; if (dig_port->dp.mso_link_count) - encoder->pipe_mask = intel_ddi_splitter_pipe_mask(dev_priv); + encoder->pipe_mask = intel_dss_mso_pipe_mask(dev_priv); } /* diff --git a/drivers/gpu/drm/i915/display/intel_dss.c b/drivers/gpu/drm/i915/display/intel_dss.c new file mode 100644 index 000000000000..e774f55f7008 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_dss.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2024 Intel Corporation + */ + +#include "i915_drv.h" +#include "i915_reg_defs.h" +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_dss.h" +#include "intel_dss_regs.h" + +/* + * Splitter enable for eDP MSO is limited to certain pipes, on certain + * platforms. + */ +u8 intel_dss_mso_pipe_mask(struct drm_i915_private *i915) +{ + if (DISPLAY_VER(i915) > 20) + return ~0; + else if (IS_ALDERLAKE_P(i915)) + return BIT(PIPE_A) | BIT(PIPE_B); + else + return BIT(PIPE_A); +} + +void intel_dss_mso_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); + struct drm_i915_private *i915 = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + u32 dss1; + + if (!HAS_MSO(i915)) + return; + + dss1 = intel_de_read(i915, ICL_PIPE_DSS_CTL1(pipe)); + + pipe_config->splitter.enable = dss1 & SPLITTER_ENABLE; + if (!pipe_config->splitter.enable) + return; + + if (drm_WARN_ON(&i915->drm, !(intel_dss_mso_pipe_mask(i915) & BIT(pipe)))) { + pipe_config->splitter.enable = false; + return; + } + + switch (dss1 & SPLITTER_CONFIGURATION_MASK) { + default: + drm_WARN(&i915->drm, true, + "Invalid splitter configuration, dss1=0x%08x\n", dss1); + fallthrough; + case SPLITTER_CONFIGURATION_2_SEGMENT: + pipe_config->splitter.link_count = 2; + break; + case SPLITTER_CONFIGURATION_4_SEGMENT: + pipe_config->splitter.link_count = 4; + break; + } + + pipe_config->splitter.pixel_overlap = REG_FIELD_GET(OVERLAP_PIXELS_MASK, dss1); +} + +void intel_dss_mso_configure(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *i915 = to_i915(crtc->base.dev); + enum pipe pipe = crtc->pipe; + u32 dss1 = 0; + + if (!HAS_MSO(i915)) + return; + + if (crtc_state->splitter.enable) { + dss1 |= SPLITTER_ENABLE; + dss1 |= OVERLAP_PIXELS(crtc_state->splitter.pixel_overlap); + if (crtc_state->splitter.link_count == 2) + dss1 |= SPLITTER_CONFIGURATION_2_SEGMENT; + else + dss1 |= SPLITTER_CONFIGURATION_4_SEGMENT; + } + + intel_de_rmw(i915, ICL_PIPE_DSS_CTL1(pipe), + SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK | + OVERLAP_PIXELS_MASK, dss1); +} diff --git a/drivers/gpu/drm/i915/display/intel_dss.h b/drivers/gpu/drm/i915/display/intel_dss.h new file mode 100644 index 000000000000..95302d061205 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_dss.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright © 2024 Intel Corporation + */ + +#ifndef __INTEL_DSS_H__ +#define __INTEL_DSS_H__ + +#include "linux/types.h" + +struct drm_i915_private; +struct intel_crtc_state; +struct intel_encoder; + +u8 intel_dss_mso_pipe_mask(struct drm_i915_private *i915); +void intel_dss_mso_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config); +void intel_dss_mso_configure(const struct intel_crtc_state *crtc_state); + +#endif /* __INTEL_DSS_H__ */ diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile index edfd812e0f41..ff1c0ce6da86 100644 --- a/drivers/gpu/drm/xe/Makefile +++ b/drivers/gpu/drm/xe/Makefile @@ -228,6 +228,7 @@ xe-$(CONFIG_DRM_XE_DISPLAY) += \ i915-display/intel_dsi.o \ i915-display/intel_dsi_dcs_backlight.o \ i915-display/intel_dsi_vbt.o \ + i915-display/intel_dss.o \ i915-display/intel_encoder.o \ i915-display/intel_fb.o \ i915-display/intel_fbc.o \

[03/19] drm/i915/ddi: Move all mso related helpers to a new file

Commit Message

Patch