| Message ID | 20241018200311.67324-2-matthew.s.atwood@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add xe3lpd edp enabling | expand |
Quoting Matt Atwood (2024-10-18 17:03:05-03:00) >From: Matt Roper <matthew.d.roper@intel.com> > >There are some minor changes to pmdemand handling on Xe3: > - Active scalers are no longer tracked. We can simply skip the readout > and programming of this field. > - Active dbuf slices are no longer tracked. We should skip the readout > and programming of this field and also make sure that it stays 0 in > our software bookkeeping so that we won't erroneously return true > from intel_pmdemand_needs_update() due to mismatches. > - Even though there aren't enough pipes to utilize them, the size of > the 'active pipes' field has expanded to four bits, taking over the > register bits previously used for dbuf slices. Since the lower bits > of the mask have moved, we need to update our reads/writes to handle > this properly. > >v2: active pipes is no longer always max 3, add in the ability to go to >4 for PTL. >v3: use intel_display for display_ver check, use INTEL_NUM_PIPES >v4: add a conditional for number of pipes macro vs using 3. > >Bspec: 68883, 69125 >Signed-off-by: Matt Roper <matthew.d.roper@intel.com> >Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> >--- > drivers/gpu/drm/i915/display/intel_pmdemand.c | 68 +++++++++++++------ > drivers/gpu/drm/i915/display/intel_pmdemand.h | 4 +- > drivers/gpu/drm/i915/i915_reg.h | 1 + > 3 files changed, 50 insertions(+), 23 deletions(-) > >diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.c b/drivers/gpu/drm/i915/display/intel_pmdemand.c >index ceaf9e3147da..7cda674fa851 100644 >--- a/drivers/gpu/drm/i915/display/intel_pmdemand.c >+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.c >@@ -258,6 +258,7 @@ intel_pmdemand_connector_needs_update(struct intel_atomic_state *state) > > static bool intel_pmdemand_needs_update(struct intel_atomic_state *state) > { >+ struct intel_display *display = to_intel_display(state); > const struct intel_bw_state *new_bw_state, *old_bw_state; > const struct intel_cdclk_state *new_cdclk_state, *old_cdclk_state; > const struct intel_crtc_state *new_crtc_state, *old_crtc_state; >@@ -274,12 +275,16 @@ static bool intel_pmdemand_needs_update(struct intel_atomic_state *state) > new_dbuf_state = intel_atomic_get_new_dbuf_state(state); > old_dbuf_state = intel_atomic_get_old_dbuf_state(state); > if (new_dbuf_state && >- (new_dbuf_state->active_pipes != >- old_dbuf_state->active_pipes || >- new_dbuf_state->enabled_slices != >- old_dbuf_state->enabled_slices)) >+ new_dbuf_state->active_pipes != old_dbuf_state->active_pipes) > return true; > >+ if (DISPLAY_VER(display) < 30) { >+ if (new_dbuf_state && >+ new_dbuf_state->enabled_slices != >+ old_dbuf_state->enabled_slices) >+ return true; >+ } >+ > new_cdclk_state = intel_atomic_get_new_cdclk_state(state); > old_cdclk_state = intel_atomic_get_old_cdclk_state(state); > if (new_cdclk_state && >@@ -327,10 +332,15 @@ int intel_pmdemand_atomic_check(struct intel_atomic_state *state) > if (IS_ERR(new_dbuf_state)) > return PTR_ERR(new_dbuf_state); > >- new_pmdemand_state->params.active_pipes = >- min_t(u8, hweight8(new_dbuf_state->active_pipes), 3); >- new_pmdemand_state->params.active_dbufs = >- min_t(u8, hweight8(new_dbuf_state->enabled_slices), 3); >+ if (DISPLAY_VER(i915) < 30) { >+ new_pmdemand_state->params.active_dbufs = >+ min_t(u8, hweight8(new_dbuf_state->enabled_slices), 3); >+ new_pmdemand_state->params.active_pipes = >+ min_t(u8, hweight8(new_dbuf_state->active_pipes), INTEL_NUM_PIPES(i915)); It is the other way around: We should use INTEL_NUM_PIPES(i915) for DISPLAY_VER(i915) >= 30 and 3 otherwise. -- Gustavo Sousa >+ } >+ else >+ new_pmdemand_state->params.active_pipes = >+ min_t(u8, hweight8(new_dbuf_state->active_pipes), 3); > > new_cdclk_state = intel_atomic_get_cdclk_state(state); > if (IS_ERR(new_cdclk_state)) >@@ -395,27 +405,32 @@ intel_pmdemand_init_pmdemand_params(struct drm_i915_private *i915, > > reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)); > >- /* Set 1*/ > pmdemand_state->params.qclk_gv_bw = > REG_FIELD_GET(XELPDP_PMDEMAND_QCLK_GV_BW_MASK, reg1); > pmdemand_state->params.voltage_index = > REG_FIELD_GET(XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK, reg1); > pmdemand_state->params.qclk_gv_index = > REG_FIELD_GET(XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK, reg1); >- pmdemand_state->params.active_pipes = >- REG_FIELD_GET(XELPDP_PMDEMAND_PIPES_MASK, reg1); >- pmdemand_state->params.active_dbufs = >- REG_FIELD_GET(XELPDP_PMDEMAND_DBUFS_MASK, reg1); > pmdemand_state->params.active_phys = > REG_FIELD_GET(XELPDP_PMDEMAND_PHYS_MASK, reg1); > >- /* Set 2*/ > pmdemand_state->params.cdclk_freq_mhz = > REG_FIELD_GET(XELPDP_PMDEMAND_CDCLK_FREQ_MASK, reg2); > pmdemand_state->params.ddiclk_max = > REG_FIELD_GET(XELPDP_PMDEMAND_DDICLK_FREQ_MASK, reg2); >- pmdemand_state->params.scalers = >- REG_FIELD_GET(XELPDP_PMDEMAND_SCALERS_MASK, reg2); >+ >+ if (DISPLAY_VER(i915) >= 30) { >+ pmdemand_state->params.active_pipes = >+ REG_FIELD_GET(XE3_PMDEMAND_PIPES_MASK, reg1); >+ } else { >+ pmdemand_state->params.active_pipes = >+ REG_FIELD_GET(XELPDP_PMDEMAND_PIPES_MASK, reg1); >+ pmdemand_state->params.active_dbufs = >+ REG_FIELD_GET(XELPDP_PMDEMAND_DBUFS_MASK, reg1); >+ >+ pmdemand_state->params.scalers = >+ REG_FIELD_GET(XELPDP_PMDEMAND_SCALERS_MASK, reg2); >+ } > > unlock: > mutex_unlock(&i915->display.pmdemand.lock); >@@ -442,6 +457,10 @@ void intel_pmdemand_program_dbuf(struct drm_i915_private *i915, > { > u32 dbufs = min_t(u32, hweight8(dbuf_slices), 3); > >+ /* PM Demand only tracks active dbufs on pre-Xe3 platforms */ >+ if (DISPLAY_VER(i915) >= 30) >+ return; >+ > mutex_lock(&i915->display.pmdemand.lock); > if (drm_WARN_ON(&i915->drm, > !intel_pmdemand_check_prev_transaction(i915))) >@@ -460,7 +479,8 @@ void intel_pmdemand_program_dbuf(struct drm_i915_private *i915, > } > > static void >-intel_pmdemand_update_params(const struct intel_pmdemand_state *new, >+intel_pmdemand_update_params(struct drm_i915_private *i915, >+ const struct intel_pmdemand_state *new, > const struct intel_pmdemand_state *old, > u32 *reg1, u32 *reg2, bool serialized) > { >@@ -495,16 +515,22 @@ intel_pmdemand_update_params(const struct intel_pmdemand_state *new, > update_reg(reg1, qclk_gv_bw, XELPDP_PMDEMAND_QCLK_GV_BW_MASK); > update_reg(reg1, voltage_index, XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK); > update_reg(reg1, qclk_gv_index, XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK); >- update_reg(reg1, active_pipes, XELPDP_PMDEMAND_PIPES_MASK); >- update_reg(reg1, active_dbufs, XELPDP_PMDEMAND_DBUFS_MASK); > update_reg(reg1, active_phys, XELPDP_PMDEMAND_PHYS_MASK); > > /* Set 2*/ > update_reg(reg2, cdclk_freq_mhz, XELPDP_PMDEMAND_CDCLK_FREQ_MASK); > update_reg(reg2, ddiclk_max, XELPDP_PMDEMAND_DDICLK_FREQ_MASK); >- update_reg(reg2, scalers, XELPDP_PMDEMAND_SCALERS_MASK); > update_reg(reg2, plls, XELPDP_PMDEMAND_PLLS_MASK); > >+ if (DISPLAY_VER(i915) >= 30) { >+ update_reg(reg1, active_pipes, XE3_PMDEMAND_PIPES_MASK); >+ } else { >+ update_reg(reg1, active_pipes, XELPDP_PMDEMAND_PIPES_MASK); >+ update_reg(reg1, active_dbufs, XELPDP_PMDEMAND_DBUFS_MASK); >+ >+ update_reg(reg2, scalers, XELPDP_PMDEMAND_SCALERS_MASK); >+ } >+ > #undef update_reg > } > >@@ -529,7 +555,7 @@ intel_pmdemand_program_params(struct drm_i915_private *i915, > reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)); > mod_reg2 = reg2; > >- intel_pmdemand_update_params(new, old, &mod_reg1, &mod_reg2, >+ intel_pmdemand_update_params(i915, new, old, &mod_reg1, &mod_reg2, > serialized); > > if (reg1 != mod_reg1) { >diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.h b/drivers/gpu/drm/i915/display/intel_pmdemand.h >index 128fd61f8f14..a1c49efdc493 100644 >--- a/drivers/gpu/drm/i915/display/intel_pmdemand.h >+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.h >@@ -20,14 +20,14 @@ struct pmdemand_params { > u8 voltage_index; > u8 qclk_gv_index; > u8 active_pipes; >- u8 active_dbufs; >+ u8 active_dbufs; /* pre-Xe3 only */ > /* Total number of non type C active phys from active_phys_mask */ > u8 active_phys; > u8 plls; > u16 cdclk_freq_mhz; > /* max from ddi_clocks[] */ > u16 ddiclk_max; >- u8 scalers; >+ u8 scalers; /* pre-Xe3 only */ > }; > > struct intel_pmdemand_state { >diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h >index 405f409e9761..89e4381f8baa 100644 >--- a/drivers/gpu/drm/i915/i915_reg.h >+++ b/drivers/gpu/drm/i915/i915_reg.h >@@ -2696,6 +2696,7 @@ > #define XELPDP_PMDEMAND_QCLK_GV_BW_MASK REG_GENMASK(31, 16) > #define XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK REG_GENMASK(14, 12) > #define XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK REG_GENMASK(11, 8) >+#define XE3_PMDEMAND_PIPES_MASK REG_GENMASK(7, 4) > #define XELPDP_PMDEMAND_PIPES_MASK REG_GENMASK(7, 6) > #define XELPDP_PMDEMAND_DBUFS_MASK REG_GENMASK(5, 4) > #define XELPDP_PMDEMAND_PHYS_MASK REG_GENMASK(2, 0) >-- >2.45.0 >
diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.c b/drivers/gpu/drm/i915/display/intel_pmdemand.c index ceaf9e3147da..7cda674fa851 100644 --- a/drivers/gpu/drm/i915/display/intel_pmdemand.c +++ b/drivers/gpu/drm/i915/display/intel_pmdemand.c @@ -258,6 +258,7 @@ intel_pmdemand_connector_needs_update(struct intel_atomic_state *state) static bool intel_pmdemand_needs_update(struct intel_atomic_state *state) { + struct intel_display *display = to_intel_display(state); const struct intel_bw_state *new_bw_state, *old_bw_state; const struct intel_cdclk_state *new_cdclk_state, *old_cdclk_state; const struct intel_crtc_state *new_crtc_state, *old_crtc_state; @@ -274,12 +275,16 @@ static bool intel_pmdemand_needs_update(struct intel_atomic_state *state) new_dbuf_state = intel_atomic_get_new_dbuf_state(state); old_dbuf_state = intel_atomic_get_old_dbuf_state(state); if (new_dbuf_state && - (new_dbuf_state->active_pipes != - old_dbuf_state->active_pipes || - new_dbuf_state->enabled_slices != - old_dbuf_state->enabled_slices)) + new_dbuf_state->active_pipes != old_dbuf_state->active_pipes) return true; + if (DISPLAY_VER(display) < 30) { + if (new_dbuf_state && + new_dbuf_state->enabled_slices != + old_dbuf_state->enabled_slices) + return true; + } + new_cdclk_state = intel_atomic_get_new_cdclk_state(state); old_cdclk_state = intel_atomic_get_old_cdclk_state(state); if (new_cdclk_state && @@ -327,10 +332,15 @@ int intel_pmdemand_atomic_check(struct intel_atomic_state *state) if (IS_ERR(new_dbuf_state)) return PTR_ERR(new_dbuf_state); - new_pmdemand_state->params.active_pipes = - min_t(u8, hweight8(new_dbuf_state->active_pipes), 3); - new_pmdemand_state->params.active_dbufs = - min_t(u8, hweight8(new_dbuf_state->enabled_slices), 3); + if (DISPLAY_VER(i915) < 30) { + new_pmdemand_state->params.active_dbufs = + min_t(u8, hweight8(new_dbuf_state->enabled_slices), 3); + new_pmdemand_state->params.active_pipes = + min_t(u8, hweight8(new_dbuf_state->active_pipes), INTEL_NUM_PIPES(i915)); + } + else + new_pmdemand_state->params.active_pipes = + min_t(u8, hweight8(new_dbuf_state->active_pipes), 3); new_cdclk_state = intel_atomic_get_cdclk_state(state); if (IS_ERR(new_cdclk_state)) @@ -395,27 +405,32 @@ intel_pmdemand_init_pmdemand_params(struct drm_i915_private *i915, reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)); - /* Set 1*/ pmdemand_state->params.qclk_gv_bw = REG_FIELD_GET(XELPDP_PMDEMAND_QCLK_GV_BW_MASK, reg1); pmdemand_state->params.voltage_index = REG_FIELD_GET(XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK, reg1); pmdemand_state->params.qclk_gv_index = REG_FIELD_GET(XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK, reg1); - pmdemand_state->params.active_pipes = - REG_FIELD_GET(XELPDP_PMDEMAND_PIPES_MASK, reg1); - pmdemand_state->params.active_dbufs = - REG_FIELD_GET(XELPDP_PMDEMAND_DBUFS_MASK, reg1); pmdemand_state->params.active_phys = REG_FIELD_GET(XELPDP_PMDEMAND_PHYS_MASK, reg1); - /* Set 2*/ pmdemand_state->params.cdclk_freq_mhz = REG_FIELD_GET(XELPDP_PMDEMAND_CDCLK_FREQ_MASK, reg2); pmdemand_state->params.ddiclk_max = REG_FIELD_GET(XELPDP_PMDEMAND_DDICLK_FREQ_MASK, reg2); - pmdemand_state->params.scalers = - REG_FIELD_GET(XELPDP_PMDEMAND_SCALERS_MASK, reg2); + + if (DISPLAY_VER(i915) >= 30) { + pmdemand_state->params.active_pipes = + REG_FIELD_GET(XE3_PMDEMAND_PIPES_MASK, reg1); + } else { + pmdemand_state->params.active_pipes = + REG_FIELD_GET(XELPDP_PMDEMAND_PIPES_MASK, reg1); + pmdemand_state->params.active_dbufs = + REG_FIELD_GET(XELPDP_PMDEMAND_DBUFS_MASK, reg1); + + pmdemand_state->params.scalers = + REG_FIELD_GET(XELPDP_PMDEMAND_SCALERS_MASK, reg2); + } unlock: mutex_unlock(&i915->display.pmdemand.lock); @@ -442,6 +457,10 @@ void intel_pmdemand_program_dbuf(struct drm_i915_private *i915, { u32 dbufs = min_t(u32, hweight8(dbuf_slices), 3); + /* PM Demand only tracks active dbufs on pre-Xe3 platforms */ + if (DISPLAY_VER(i915) >= 30) + return; + mutex_lock(&i915->display.pmdemand.lock); if (drm_WARN_ON(&i915->drm, !intel_pmdemand_check_prev_transaction(i915))) @@ -460,7 +479,8 @@ void intel_pmdemand_program_dbuf(struct drm_i915_private *i915, } static void -intel_pmdemand_update_params(const struct intel_pmdemand_state *new, +intel_pmdemand_update_params(struct drm_i915_private *i915, + const struct intel_pmdemand_state *new, const struct intel_pmdemand_state *old, u32 *reg1, u32 *reg2, bool serialized) { @@ -495,16 +515,22 @@ intel_pmdemand_update_params(const struct intel_pmdemand_state *new, update_reg(reg1, qclk_gv_bw, XELPDP_PMDEMAND_QCLK_GV_BW_MASK); update_reg(reg1, voltage_index, XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK); update_reg(reg1, qclk_gv_index, XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK); - update_reg(reg1, active_pipes, XELPDP_PMDEMAND_PIPES_MASK); - update_reg(reg1, active_dbufs, XELPDP_PMDEMAND_DBUFS_MASK); update_reg(reg1, active_phys, XELPDP_PMDEMAND_PHYS_MASK); /* Set 2*/ update_reg(reg2, cdclk_freq_mhz, XELPDP_PMDEMAND_CDCLK_FREQ_MASK); update_reg(reg2, ddiclk_max, XELPDP_PMDEMAND_DDICLK_FREQ_MASK); - update_reg(reg2, scalers, XELPDP_PMDEMAND_SCALERS_MASK); update_reg(reg2, plls, XELPDP_PMDEMAND_PLLS_MASK); + if (DISPLAY_VER(i915) >= 30) { + update_reg(reg1, active_pipes, XE3_PMDEMAND_PIPES_MASK); + } else { + update_reg(reg1, active_pipes, XELPDP_PMDEMAND_PIPES_MASK); + update_reg(reg1, active_dbufs, XELPDP_PMDEMAND_DBUFS_MASK); + + update_reg(reg2, scalers, XELPDP_PMDEMAND_SCALERS_MASK); + } + #undef update_reg } @@ -529,7 +555,7 @@ intel_pmdemand_program_params(struct drm_i915_private *i915, reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)); mod_reg2 = reg2; - intel_pmdemand_update_params(new, old, &mod_reg1, &mod_reg2, + intel_pmdemand_update_params(i915, new, old, &mod_reg1, &mod_reg2, serialized); if (reg1 != mod_reg1) { diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.h b/drivers/gpu/drm/i915/display/intel_pmdemand.h index 128fd61f8f14..a1c49efdc493 100644 --- a/drivers/gpu/drm/i915/display/intel_pmdemand.h +++ b/drivers/gpu/drm/i915/display/intel_pmdemand.h @@ -20,14 +20,14 @@ struct pmdemand_params { u8 voltage_index; u8 qclk_gv_index; u8 active_pipes; - u8 active_dbufs; + u8 active_dbufs; /* pre-Xe3 only */ /* Total number of non type C active phys from active_phys_mask */ u8 active_phys; u8 plls; u16 cdclk_freq_mhz; /* max from ddi_clocks[] */ u16 ddiclk_max; - u8 scalers; + u8 scalers; /* pre-Xe3 only */ }; struct intel_pmdemand_state { diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 405f409e9761..89e4381f8baa 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2696,6 +2696,7 @@ #define XELPDP_PMDEMAND_QCLK_GV_BW_MASK REG_GENMASK(31, 16) #define XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK REG_GENMASK(14, 12) #define XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK REG_GENMASK(11, 8) +#define XE3_PMDEMAND_PIPES_MASK REG_GENMASK(7, 4) #define XELPDP_PMDEMAND_PIPES_MASK REG_GENMASK(7, 6) #define XELPDP_PMDEMAND_DBUFS_MASK REG_GENMASK(5, 4) #define XELPDP_PMDEMAND_PHYS_MASK REG_GENMASK(2, 0)