@@ -621,7 +621,8 @@ void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder,
/*
* Same as intel_ddi_enable_transcoder_func(), but it does not set the enable
- * bit.
+ * bit for the DDI function and enables the DP2 configuration. Called for all
+ * transcoder types.
*/
void
intel_ddi_config_transcoder_func(struct intel_encoder *encoder,
@@ -632,12 +633,20 @@ intel_ddi_config_transcoder_func(struct intel_encoder *encoder,
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
u32 ctl;
+ intel_ddi_config_transcoder_dp2(crtc_state, true);
+
ctl = intel_ddi_transcoder_func_reg_val_get(encoder, crtc_state);
ctl &= ~TRANS_DDI_FUNC_ENABLE;
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(dev_priv, cpu_transcoder),
ctl);
}
+/*
+ * Disable the DDI function and port syncing.
+ * For SST, pre-TGL MST, TGL+ MST-slave transcoders: deselect the DDI port,
+ * SST/MST mode and disable the DP2 configuration. For TGL+ MST-master
+ * transcoders these are done later in intel_ddi_post_disable_dp().
+ */
void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state)
{
struct intel_display *display = to_intel_display(crtc_state);
@@ -674,6 +683,9 @@ void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(dev_priv, cpu_transcoder),
ctl);
+ if (intel_dp_mst_is_slave_trans(crtc_state))
+ intel_ddi_config_transcoder_dp2(crtc_state, false);
+
if (intel_has_quirk(display, QUIRK_INCREASE_DDI_DISABLED_TIME) &&
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
drm_dbg_kms(display->drm, "Quirk Increase DDI disabled time\n");
@@ -2552,10 +2564,6 @@ static void mtl_ddi_pre_enable_dp(struct intel_atomic_state *state,
/*
* 6.b If DP v2.0/128b mode - Configure TRANS_DP2_CTL register settings.
- */
- intel_ddi_config_transcoder_dp2(crtc_state, true);
-
- /*
* 6.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
* Transport Select
*/
@@ -2690,8 +2698,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
*/
intel_ddi_enable_transcoder_clock(encoder, crtc_state);
- intel_ddi_config_transcoder_dp2(crtc_state, true);
-
/*
* 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
* Transport Select
On ADLP+ during modeset enabling and disabling, enable and disable the DP2 configuration for MST slave transcoders as required by the specification. Update the documentation of intel_ddi_config_transcoder_func() / intel_ddi_disable_transcoder_func() based on the above. While at it also clarify the programming steps of these functions specific to transcoder types. v2: - Enable/disable the DP2 config from intel_ddi_config_transcoder_func()/intel_ddi_disable_transcoder_func(). (Jani) - Handle all ADLP+ platforms in one patch, instead of doing that separately wrt. PTL. Bspec: 55424, 54128, 65448, 68849 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> --- drivers/gpu/drm/i915/display/intel_ddi.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)