| Message ID | 20240219130109.341523-7-john.g.garry@oracle.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | block atomic writes | expand |
> +#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC) > + if (!(request_mask & BDEV_STATX_SUPPORTED_MASK)) > + return; BDEV_STATX_SUPPORTED_MASK is misleading here. bdevs support a lot more fields, these are just the ones needing special attention. I'd do away with the extra define and just open code it. > + /* If this is a block device inode, override the filesystem > + * attributes with the block device specific parameters > + * that need to be obtained from the bdev backing inode > + */ This is not the normal kernel multi-line comment format. > + if (S_ISBLK(d_backing_inode(path.dentry)->i_mode)) > + bdev_statx(path.dentry, stat, request_mask); I know I touched this last, but does anyone remember why we have various random fixups in vfs_statx and not in vfs_getattr_nosec, where they we have more of them and also the inode at hand?
On 20/02/2024 08:29, Christoph Hellwig wrote: >> +#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC) > >> + if (!(request_mask & BDEV_STATX_SUPPORTED_MASK)) >> + return; > > BDEV_STATX_SUPPORTED_MASK is misleading here. bdevs support a lot more > fields, these are just the ones needing special attention. I'd do away > with the extra define and just open code it. ok, fine > >> + /* If this is a block device inode, override the filesystem >> + * attributes with the block device specific parameters >> + * that need to be obtained from the bdev backing inode >> + */ > > This is not the normal kernel multi-line comment format. > will fix >> + if (S_ISBLK(d_backing_inode(path.dentry)->i_mode)) >> + bdev_statx(path.dentry, stat, request_mask); > > I know I touched this last, but does anyone remember why we have > various random fixups in vfs_statx and not in vfs_getattr_nosec, where > they we have more of them and also the inode at hand?
John Garry <john.g.garry@oracle.com> writes: > From: Prasad Singamsetty <prasad.singamsetty@oracle.com> > > Extend statx system call to return additional info for atomic write support > support if the specified file is a block device. > > Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> > Signed-off-by: John Garry <john.g.garry@oracle.com> > --- > block/bdev.c | 37 +++++++++++++++++++++++++++---------- > fs/stat.c | 13 ++++++------- > include/linux/blkdev.h | 5 +++-- > 3 files changed, 36 insertions(+), 19 deletions(-) > > diff --git a/block/bdev.c b/block/bdev.c > index e9f1b12bd75c..0dada9902bd4 100644 > --- a/block/bdev.c > +++ b/block/bdev.c > @@ -1116,24 +1116,41 @@ void sync_bdevs(bool wait) > iput(old_inode); > } > > +#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC) > + > /* > - * Handle STATX_DIOALIGN for block devices. > - * > - * Note that the inode passed to this is the inode of a block device node file, > - * not the block device's internal inode. Therefore it is *not* valid to use > - * I_BDEV() here; the block device has to be looked up by i_rdev instead. > + * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices. > */ > -void bdev_statx_dioalign(struct inode *inode, struct kstat *stat) > +void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask) why change this to dentry? Why not keep it as inode itself? -ritesh > { > struct block_device *bdev; > > - bdev = blkdev_get_no_open(inode->i_rdev); > + if (!(request_mask & BDEV_STATX_SUPPORTED_MASK)) > + return; > + > + /* > + * Note that d_backing_inode() returns the inode of a block device node > + * file, not the block device's internal inode. Therefore it is *not* > + * valid to use I_BDEV() here; the block device has to be looked up by > + * i_rdev instead. > + */ > + bdev = blkdev_get_no_open(d_backing_inode(dentry)->i_rdev); > if (!bdev) > return; > > - stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; > - stat->dio_offset_align = bdev_logical_block_size(bdev); > - stat->result_mask |= STATX_DIOALIGN; > + if (request_mask & STATX_DIOALIGN) { > + stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; > + stat->dio_offset_align = bdev_logical_block_size(bdev); > + stat->result_mask |= STATX_DIOALIGN; > + } > + > + if (request_mask & STATX_WRITE_ATOMIC && bdev_can_atomic_write(bdev)) { > + struct request_queue *bd_queue = bdev->bd_queue; > + > + generic_fill_statx_atomic_writes(stat, > + queue_atomic_write_unit_min_bytes(bd_queue), > + queue_atomic_write_unit_max_bytes(bd_queue)); > + } > > blkdev_put_no_open(bdev); > } > diff --git a/fs/stat.c b/fs/stat.c > index 522787a4ab6a..bd0618477702 100644 > --- a/fs/stat.c > +++ b/fs/stat.c > @@ -290,13 +290,12 @@ static int vfs_statx(int dfd, struct filename *filename, int flags, > stat->attributes |= STATX_ATTR_MOUNT_ROOT; > stat->attributes_mask |= STATX_ATTR_MOUNT_ROOT; > > - /* Handle STATX_DIOALIGN for block devices. */ > - if (request_mask & STATX_DIOALIGN) { > - struct inode *inode = d_backing_inode(path.dentry); > - > - if (S_ISBLK(inode->i_mode)) > - bdev_statx_dioalign(inode, stat); > - } > + /* If this is a block device inode, override the filesystem > + * attributes with the block device specific parameters > + * that need to be obtained from the bdev backing inode > + */ > + if (S_ISBLK(d_backing_inode(path.dentry)->i_mode)) > + bdev_statx(path.dentry, stat, request_mask); > > path_put(&path); > if (retry_estale(error, lookup_flags)) { > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h > index 40ed56ef4937..4f04456f1250 100644 > --- a/include/linux/blkdev.h > +++ b/include/linux/blkdev.h > @@ -1541,7 +1541,7 @@ int sync_blockdev(struct block_device *bdev); > int sync_blockdev_range(struct block_device *bdev, loff_t lstart, loff_t lend); > int sync_blockdev_nowait(struct block_device *bdev); > void sync_bdevs(bool wait); > -void bdev_statx_dioalign(struct inode *inode, struct kstat *stat); > +void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask); > void printk_all_partitions(void); > int __init early_lookup_bdev(const char *pathname, dev_t *dev); > #else > @@ -1559,7 +1559,8 @@ static inline int sync_blockdev_nowait(struct block_device *bdev) > static inline void sync_bdevs(bool wait) > { > } > -static inline void bdev_statx_dioalign(struct inode *inode, struct kstat *stat) > +static inline void bdev_statx(struct dentry *dentry, struct kstat *stat, > + u32 request_mask) > { > } > static inline void printk_all_partitions(void) > -- > 2.31.1
On 25/02/2024 14:20, Ritesh Harjani (IBM) wrote: > John Garry <john.g.garry@oracle.com> writes: > >> From: Prasad Singamsetty <prasad.singamsetty@oracle.com> >> >> Extend statx system call to return additional info for atomic write support >> support if the specified file is a block device. >> >> Signed-off-by: Prasad Singamsetty <prasad.singamsetty@oracle.com> >> Signed-off-by: John Garry <john.g.garry@oracle.com> >> --- >> block/bdev.c | 37 +++++++++++++++++++++++++++---------- >> fs/stat.c | 13 ++++++------- >> include/linux/blkdev.h | 5 +++-- >> 3 files changed, 36 insertions(+), 19 deletions(-) >> >> diff --git a/block/bdev.c b/block/bdev.c >> index e9f1b12bd75c..0dada9902bd4 100644 >> --- a/block/bdev.c >> +++ b/block/bdev.c >> @@ -1116,24 +1116,41 @@ void sync_bdevs(bool wait) >> iput(old_inode); >> } >> >> +#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC) >> + >> /* >> - * Handle STATX_DIOALIGN for block devices. >> - * >> - * Note that the inode passed to this is the inode of a block device node file, >> - * not the block device's internal inode. Therefore it is *not* valid to use >> - * I_BDEV() here; the block device has to be looked up by i_rdev instead. >> + * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices. >> */ >> -void bdev_statx_dioalign(struct inode *inode, struct kstat *stat) >> +void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask) > > why change this to dentry? Why not keep it as inode itself? I suppose that I could do that. Thanks, John
diff --git a/block/bdev.c b/block/bdev.c index e9f1b12bd75c..0dada9902bd4 100644 --- a/block/bdev.c +++ b/block/bdev.c @@ -1116,24 +1116,41 @@ void sync_bdevs(bool wait) iput(old_inode); } +#define BDEV_STATX_SUPPORTED_MASK (STATX_DIOALIGN | STATX_WRITE_ATOMIC) + /* - * Handle STATX_DIOALIGN for block devices. - * - * Note that the inode passed to this is the inode of a block device node file, - * not the block device's internal inode. Therefore it is *not* valid to use - * I_BDEV() here; the block device has to be looked up by i_rdev instead. + * Handle STATX_{DIOALIGN, WRITE_ATOMIC} for block devices. */ -void bdev_statx_dioalign(struct inode *inode, struct kstat *stat) +void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask) { struct block_device *bdev; - bdev = blkdev_get_no_open(inode->i_rdev); + if (!(request_mask & BDEV_STATX_SUPPORTED_MASK)) + return; + + /* + * Note that d_backing_inode() returns the inode of a block device node + * file, not the block device's internal inode. Therefore it is *not* + * valid to use I_BDEV() here; the block device has to be looked up by + * i_rdev instead. + */ + bdev = blkdev_get_no_open(d_backing_inode(dentry)->i_rdev); if (!bdev) return; - stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; - stat->dio_offset_align = bdev_logical_block_size(bdev); - stat->result_mask |= STATX_DIOALIGN; + if (request_mask & STATX_DIOALIGN) { + stat->dio_mem_align = bdev_dma_alignment(bdev) + 1; + stat->dio_offset_align = bdev_logical_block_size(bdev); + stat->result_mask |= STATX_DIOALIGN; + } + + if (request_mask & STATX_WRITE_ATOMIC && bdev_can_atomic_write(bdev)) { + struct request_queue *bd_queue = bdev->bd_queue; + + generic_fill_statx_atomic_writes(stat, + queue_atomic_write_unit_min_bytes(bd_queue), + queue_atomic_write_unit_max_bytes(bd_queue)); + } blkdev_put_no_open(bdev); } diff --git a/fs/stat.c b/fs/stat.c index 522787a4ab6a..bd0618477702 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -290,13 +290,12 @@ static int vfs_statx(int dfd, struct filename *filename, int flags, stat->attributes |= STATX_ATTR_MOUNT_ROOT; stat->attributes_mask |= STATX_ATTR_MOUNT_ROOT; - /* Handle STATX_DIOALIGN for block devices. */ - if (request_mask & STATX_DIOALIGN) { - struct inode *inode = d_backing_inode(path.dentry); - - if (S_ISBLK(inode->i_mode)) - bdev_statx_dioalign(inode, stat); - } + /* If this is a block device inode, override the filesystem + * attributes with the block device specific parameters + * that need to be obtained from the bdev backing inode + */ + if (S_ISBLK(d_backing_inode(path.dentry)->i_mode)) + bdev_statx(path.dentry, stat, request_mask); path_put(&path); if (retry_estale(error, lookup_flags)) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 40ed56ef4937..4f04456f1250 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1541,7 +1541,7 @@ int sync_blockdev(struct block_device *bdev); int sync_blockdev_range(struct block_device *bdev, loff_t lstart, loff_t lend); int sync_blockdev_nowait(struct block_device *bdev); void sync_bdevs(bool wait); -void bdev_statx_dioalign(struct inode *inode, struct kstat *stat); +void bdev_statx(struct dentry *dentry, struct kstat *stat, u32 request_mask); void printk_all_partitions(void); int __init early_lookup_bdev(const char *pathname, dev_t *dev); #else @@ -1559,7 +1559,8 @@ static inline int sync_blockdev_nowait(struct block_device *bdev) static inline void sync_bdevs(bool wait) { } -static inline void bdev_statx_dioalign(struct inode *inode, struct kstat *stat) +static inline void bdev_statx(struct dentry *dentry, struct kstat *stat, + u32 request_mask) { } static inline void printk_all_partitions(void)