similarity index 83%
rename from autotests/testNetconfig/ssidTKIP.conf
rename to autotests/testNetconfig/ap-main.conf
@@ -1,6 +1,6 @@
hw_mode=g
channel=1
-ssid=ssidTKIP
+ssid=ap-main
wpa=1
wpa_pairwise=TKIP
new file mode 100644
@@ -0,0 +1,7 @@
+hw_mode=g
+channel=1
+ssid=ap-ns1
+
+wpa=1
+wpa_pairwise=TKIP
+wpa_passphrase=secret123
@@ -13,6 +13,7 @@ import testutil
from config import ctx
import os
import socket
+import datetime, time
class Test(unittest.TestCase):
@@ -27,6 +28,14 @@ class Test(unittest.TestCase):
return True
+ def get_ll_addrs6(ns, ifname):
+ show_ip = ns.start_process(['ip', 'addr', 'show', ifname])
+ show_ip.wait()
+ for l in show_ip.out.split('\n'):
+ if 'inet6 fe80::' in l:
+ return socket.inet_pton(socket.AF_INET6, l.split(None, 1)[1].split('/', 1)[0])
+ return None
+
wd = IWD(True)
psk_agent = PSKAgent("secret123")
@@ -35,7 +44,7 @@ class Test(unittest.TestCase):
devices = wd.list_devices(1)
device = devices[0]
- ordered_network = device.get_ordered_network('ssidTKIP')
+ ordered_network = device.get_ordered_network('ap-ns1')
self.assertEqual(ordered_network.type, NetworkType.psk)
@@ -46,18 +55,21 @@ class Test(unittest.TestCase):
condition = 'obj.state == DeviceState.connected'
wd.wait_for_object_condition(device, condition)
+ connect_time = time.time()
testutil.test_iface_operstate()
- testutil.test_ifaces_connected()
testutil.test_ip_address_match(device.name, '192.168.1.10', 17, 24)
ctx.non_block_wait(check_addr, 10, device,
exception=Exception("IPv6 address was not set"))
+ # Cannot use test_ifaces_connected() across namespaces (implementation details)
+ testutil.test_ip_connected(('192.168.1.10', ctx), ('192.168.1.1', self.ns1))
+
ifname = str(device.name)
- router_ll_addr = [addr for addr, _, _ in testutil.get_addrs6(self.hapd.ifname) if addr[0:2] == b'\xfe\x80'][0]
+ router_ll_addr = get_ll_addrs6(self.ns1, self.hapd.ifname)
# Since we're in an isolated VM with freshly created interfaces we know any routes
- # will have been created by IWD and don't have to allow for pre-existing routes
+ # will have been created by IWD and we don't have to allow for pre-existing routes
# in the table.
# Flags: 1=RTF_UP, 2=RTF_GATEWAY
expected_routes4 = {
@@ -94,6 +106,67 @@ class Test(unittest.TestCase):
# of our log since we care about the end result here.
self.assertEqual(expected_rclog, entries[-3:])
+ leases_file = self.parse_lease_file('/tmp/dhcpd.leases', socket.AF_INET)
+ lease = leases_file['leases'][socket.inet_pton(socket.AF_INET, '192.168.1.10')]
+ self.assertEqual(lease['state'], 'active')
+ self.assertTrue(lease['starts'] < connect_time)
+ self.assertTrue(lease['ends'] > connect_time)
+ # The T1 is 15 seconds per dhcpd.conf. This is the approximate interval between lease
+ # renewals we should see from the client (+/- 1 second + some jitter). Wait a little
+ # less than twice that time (25s) so that we can expect the lease was renewed strictly
+ # once (not 0 or 2 times) by that time, check that the lease timestamps have changed by
+ # at least 10s so as to leave a lot of margin.
+ renew_time = lease['starts'] + 15
+ now = time.time()
+ ctx.non_block_wait(lambda: False, renew_time + 10 - now, exception=False)
+
+ leases_file = self.parse_lease_file('/tmp/dhcpd.leases', socket.AF_INET)
+ new_lease = leases_file['leases'][socket.inet_pton(socket.AF_INET, '192.168.1.10')]
+ self.assertEqual(new_lease['state'], 'active')
+ self.assertTrue(new_lease['starts'] > lease['starts'] + 10)
+ self.assertTrue(new_lease['starts'] < lease['starts'] + 25)
+ self.assertTrue(new_lease['ends'] > lease['ends'] + 10)
+ self.assertTrue(new_lease['ends'] < lease['ends'] + 25)
+
+ # Now wait another T1 seconds but don't let our DHCP client get its REQUEST out this
+ # time so as to test renew timeouts and resends. The retry interval is 60 seconds
+ # since (T2 - T1) / 2 is shorter than 60s. It is now about 10s since the last
+ # renewal or 5s before the next DHCPREQUEST frame that is going to be lost. We'll
+ # wait T1 seconds, so until about 10s after the failed attempt, we'll check that
+ # there was no renewal by that time, just in case, and we'll reenable frame delivery.
+ # We'll then wait another 60s and we should see the lease has been successfully
+ # renewed some 10 seconds earlier on the 1st DHCPREQUEST retransmission.
+ #
+ # We can't use hswim to block the frames from reaching the AP because we'd lose
+ # beacons and get disconnected. We also can't drop our subnet route or IP address
+ # because IWD's sendto() call would synchronously error out and the DHCP client
+ # would just give up. Add a false route to break routing to 192.168.1.1 and delete
+ # it afterwards.
+ os.system('ip route add 192.168.1.1/32 dev ' + ifname + ' via 192.168.1.100 preference 0')
+
+ lease = new_lease
+ renew_time = lease['starts'] + 15
+ now = time.time()
+ ctx.non_block_wait(lambda: False, renew_time + 10 - now, exception=False)
+
+ leases_file = self.parse_lease_file('/tmp/dhcpd.leases', socket.AF_INET)
+ new_lease = leases_file['leases'][socket.inet_pton(socket.AF_INET, '192.168.1.10')]
+ self.assertEqual(new_lease['starts'], lease['starts'])
+
+ os.system('ip route del 192.168.1.1/32 dev ' + ifname + ' via 192.168.1.100 preference 0')
+
+ retry_time = lease['starts'] + 75
+ now = time.time()
+ ctx.non_block_wait(lambda: False, retry_time + 10 - now, exception=False)
+
+ leases_file = self.parse_lease_file('/tmp/dhcpd.leases', socket.AF_INET)
+ new_lease = leases_file['leases'][socket.inet_pton(socket.AF_INET, '192.168.1.10')]
+ self.assertEqual(new_lease['state'], 'active')
+ self.assertTrue(new_lease['starts'] > lease['starts'] + 70)
+ self.assertTrue(new_lease['starts'] < lease['starts'] + 85)
+ self.assertTrue(new_lease['ends'] > lease['ends'] + 70)
+ self.assertTrue(new_lease['ends'] < lease['ends'] + 85)
+
device.disconnect()
condition = 'not obj.connected'
@@ -116,25 +189,27 @@ class Test(unittest.TestCase):
except:
pass
- hapd = HostapdCLI()
- cls.hapd = hapd
+ cls.ns1 = ctx.get_namespace('ns1')
+ cls.hapd = HostapdCLI('ap-ns1.conf')
# TODO: This could be moved into test-runner itself if other tests ever
# require this functionality (p2p, FILS, etc.). Since its simple
# enough it can stay here for now.
- ctx.start_process(['ip', 'addr','add', '192.168.1.1/255.255.128.0',
- 'dev', hapd.ifname,]).wait()
- ctx.start_process(['touch', '/tmp/dhcpd.leases']).wait()
- cls.dhcpd_pid = ctx.start_process(['dhcpd', '-f', '-cf', '/tmp/dhcpd.conf',
- '-lf', '/tmp/dhcpd.leases',
- hapd.ifname], cleanup=remove_lease4)
-
- ctx.start_process(['ip', 'addr', 'add', '3ffe:501:ffff:100::1/72',
- 'dev', hapd.ifname]).wait()
- ctx.start_process(['touch', '/tmp/dhcpd6.leases']).wait()
- cls.dhcpd6_pid = ctx.start_process(['dhcpd', '-6', '-f', '-cf', '/tmp/dhcpd-v6.conf',
- '-lf', '/tmp/dhcpd6.leases',
- hapd.ifname], cleanup=remove_lease6)
- ctx.start_process(['sysctl', 'net.ipv6.conf.' + hapd.ifname + '.forwarding=1']).wait()
+ cls.ns1.start_process(['ip', 'addr','add', '192.168.1.1/17',
+ 'dev', cls.hapd.ifname]).wait()
+ cls.ns1.start_process(['touch', '/tmp/dhcpd.leases']).wait()
+ cls.dhcpd_pid = cls.ns1.start_process(['dhcpd', '-f', '-d', '-cf', '/tmp/dhcpd.conf',
+ '-lf', '/tmp/dhcpd.leases',
+ cls.hapd.ifname], cleanup=remove_lease4)
+
+ cls.ns1.start_process(['ip', 'addr', 'add', '3ffe:501:ffff:100::1/72',
+ 'dev', cls.hapd.ifname]).wait()
+ cls.ns1.start_process(['touch', '/tmp/dhcpd6.leases']).wait()
+ cls.dhcpd6_pid = cls.ns1.start_process(['dhcpd', '-6', '-f', '-d',
+ '-cf', '/tmp/dhcpd-v6.conf',
+ '-lf', '/tmp/dhcpd6.leases',
+ cls.hapd.ifname], cleanup=remove_lease6)
+ cls.ns1.start_process(['sysctl',
+ 'net.ipv6.conf.' + cls.hapd.ifname + '.forwarding=1']).wait()
# Send out Router Advertisements telling clients to use DHCPv6.
# Note trying to send the RAs from the router's global IPv6 address by adding a
# "AdvRASrcAddress { 3ffe:501:ffff:100::1; };" line will fail because the client
@@ -142,7 +217,7 @@ class Test(unittest.TestCase):
# with a non-link-local gateway address that is present on another interface in the
# same namespace.
config = open('/tmp/radvd.conf', 'w')
- config.write('interface ' + hapd.ifname + ''' {
+ config.write('interface ' + cls.hapd.ifname + ''' {
AdvSendAdvert on;
AdvManagedFlag on;
prefix 3ffe:501:ffff:100::/72 { AdvAutonomous off; };
@@ -151,7 +226,8 @@ class Test(unittest.TestCase):
route 3ffe:501:ffff:500::/66 { AdvRoutePreference high; };
};''')
config.close()
- cls.radvd_pid = ctx.start_process(['radvd', '-n', '-d5', '-p', '/tmp/radvd.pid', '-C', '/tmp/radvd.conf'])
+ cls.radvd_pid = cls.ns1.start_process(['radvd', '-n', '-d5',
+ '-p', '/tmp/radvd.pid', '-C', '/tmp/radvd.conf'])
cls.orig_path = os.environ['PATH']
os.environ['PATH'] = '/tmp/test-bin:' + os.environ['PATH']
@@ -160,14 +236,83 @@ class Test(unittest.TestCase):
@classmethod
def tearDownClass(cls):
IWD.clear_storage()
- ctx.stop_process(cls.dhcpd_pid)
+ cls.ns1.stop_process(cls.dhcpd_pid)
cls.dhcpd_pid = None
- ctx.stop_process(cls.dhcpd6_pid)
+ cls.ns1.stop_process(cls.dhcpd6_pid)
cls.dhcpd6_pid = None
- ctx.stop_process(cls.radvd_pid)
+ cls.ns1.stop_process(cls.radvd_pid)
cls.radvd_pid = None
os.system('rm -rf /tmp/radvd.conf /tmp/resolvconf.log /tmp/test-bin')
os.environ['PATH'] = cls.orig_path
+ @staticmethod
+ def parse_lease_file(path, family):
+ file = open(path, 'r')
+ lines = file.readlines()
+ file.close()
+
+ stack = [[]]
+ statement = []
+ token = ''
+ for line in lines:
+ whitespace = False
+ quote = False
+ for ch in line:
+ if not quote and ch in ' \t\r\n;{}=#':
+ if len(token):
+ statement.append(token)
+ token = ''
+ if not quote and ch in ';{}':
+ if len(statement):
+ stack[-1].append(statement)
+ statement = []
+ if ch == '"':
+ quote = not quote
+ elif quote or ch not in ' \t\r\n;{}#':
+ token += ch
+ if ch == '#':
+ break
+ elif ch == '{':
+ stack.append([])
+ elif ch == '}':
+ statements = stack.pop()
+ stack[-1][-1].append(statements)
+ if len(token):
+ statement.append(token)
+ token = ''
+ if len(statement):
+ stack[-1].append(statement)
+ statements = stack.pop(0)
+ if len(stack):
+ raise Exception('Unclosed block(s)')
+
+ contents = {'leases':{}}
+ for s in statements:
+ if s[0] == 'lease':
+ ip = socket.inet_pton(family, s[1])
+ lease = {}
+ for param in s[2]:
+ if param[0] in ('starts', 'ends', 'tstp', 'tsfp', 'atsfp', 'cltt'):
+ weekday = param[1]
+ year, month, day = param[2].split('/')
+ hour, minute, second = param[3].split(':')
+ dt = datetime.datetime(
+ int(year), int(month), int(day),
+ int(hour), int(minute), int(second),
+ tzinfo=datetime.timezone.utc)
+ lease[param[0]] = dt.timestamp()
+ elif param[0:2] == ['binding', 'state']:
+ lease['state'] = param[2]
+ elif param[0:2] == ['hardware', 'ethernet']:
+ lease['hwaddr'] = bytes([int(v, 16) for v in param[2].split(':')])
+ elif param[0] in ('preferred-life', 'max-life'):
+ lease[param[0]] = int(param[1])
+ elif param[0] in ('client-hostname'):
+ lease[param[0]] = param[1]
+ contents['leases'][ip] = lease # New entries overwrite older ones
+ elif s[0] == 'server-duid':
+ contents[s[0]] = s[1]
+ return contents
+
if __name__ == '__main__':
unittest.main(exit=True)
@@ -1,5 +1,15 @@
-default-lease-time 600; # 10 minutes
-max-lease-time 7200; # 2 hours
+default-lease-time 120; # 2 minutes
+min-lease-time 120; # 2 minutes
+max-lease-time 120; # 2 minutes
+option dhcp-renewal-time 15; # 15 secs for T1
+# We set a relatively low lease lifetime of 2 minutes but our renewal interval
+# (T1) is still unproportionally low to speed the test up -- 12% instead of the
+# default 50% lifetime value. We need a lifetime in the order of minutes
+# because minimum lease renewal retry interval is 60s per spec. However by
+# default dhcpd will not renew leases that are newer than 25% their lifetime.
+# Set that threshold to 1% so that we can verify that the lease is renewed
+# without waiting too long.
+dhcp-cache-threshold 1;
option broadcast-address 192.168.127.255;
option routers 192.168.1.254;
@@ -1,9 +1,11 @@
[SETUP]
-num_radios=3
+num_radios=4
start_iwd=0
[HOSTAPD]
-rad0=ssidTKIP.conf
+rad2=ap-main.conf
+rad3=ap-ns1.conf
[NameSpaces]
-ns0=rad2
+ns0=rad0
+ns1=rad3
similarity index 100%
rename from autotests/testNetconfig/ssidTKIP.psk
rename to autotests/testNetconfig/static.psk
@@ -32,7 +32,7 @@ class Test(unittest.TestCase):
dev1 = wd.list_devices(1)[0]
dev2 = wd_ns0.list_devices(1)[0]
- ordered_network = dev1.get_ordered_network('ssidTKIP')
+ ordered_network = dev1.get_ordered_network('ap-main')
self.assertEqual(ordered_network.type, NetworkType.psk)
@@ -80,7 +80,7 @@ class Test(unittest.TestCase):
# of the log since we care about the end result here.
self.assertEqual(expected_rclog, entries[-3:])
- ordered_network = dev2.get_ordered_network('ssidTKIP')
+ ordered_network = dev2.get_ordered_network('ap-main')
condition = 'not obj.connected'
wd_ns0.wait_for_object_condition(ordered_network.network_object, condition)
@@ -117,7 +117,7 @@ class Test(unittest.TestCase):
except:
pass
- hapd = HostapdCLI()
+ hapd = HostapdCLI('ap-main.conf')
# TODO: This could be moved into test-runner itself if other tests ever
# require this functionality (p2p, FILS, etc.). Since it's simple
# enough it can stay here for now.
@@ -127,7 +127,7 @@ class Test(unittest.TestCase):
cls.dhcpd_pid = ctx.start_process(['dhcpd', '-f', '-cf', '/tmp/dhcpd.conf',
'-lf', '/tmp/dhcpd.leases',
hapd.ifname], cleanup=remove_lease)
- IWD.copy_to_storage('ssidTKIP.psk', '/tmp/storage')
+ IWD.copy_to_storage('static.psk', '/tmp/storage', 'ap-main.psk')
cls.orig_path = os.environ['PATH']
os.environ['PATH'] = '/tmp/test-bin:' + os.environ['PATH']
@@ -33,7 +33,7 @@ class HostapdCLI(object):
_instances = WeakValueDictionary()
def __new__(cls, config=None, *args, **kwargs):
- hapd = ctx.hostapd[config]
+ hapd = ctx.get_hapd_instance(config)
if not config:
config = hapd.config
@@ -58,10 +58,10 @@ class HostapdCLI(object):
if not ctx.hostapd:
raise Exception("No hostapd instances are configured")
- if not config and len(ctx.hostapd.instances) > 1:
+ if not config and sum([len(hapd.instances) for hapd in ctx.hostapd]) > 1:
raise Exception('config must be provided if more than one hostapd instance exists')
- hapd = ctx.hostapd[config]
+ hapd = ctx.get_hapd_instance(config)
self.interface = hapd.intf
self.config = hapd.config
Test that the DHCPv4 lease got renewed after the T1 timer runs out. Then also simulate the DHCPREQUEST during renew being lost and retransmitted and the lease eventually getting renewed T1 + 60s later. The main downside is that this test will inevitably take a while if running in Qemu without the time travel ability. Update the test and some utility code to run hostapd in an isolated net namespace for connection_test.py. We now need a second hostapd instance though because in static_test.py we test ACD and we need to produce an IP conflict. Moving the hostapd instance unexpectedly fixes dhcpd's internal mechanism to avoid IP conflicts and it would no longer assign 192.168.1.10 to the second client, it'd notice that address was already in use and assign the next free address, or fail if there was none. So add a second hostapd instance that runs in the main namespace together with the statically-configured client, it turns out the test relies on the kernel being unable to deliver IP traffic to interfaces on the same system. --- .../{ssidTKIP.conf => ap-main.conf} | 2 +- autotests/testNetconfig/ap-ns1.conf | 7 + autotests/testNetconfig/connection_test.py | 195 +++++++++++++++--- autotests/testNetconfig/dhcpd.conf | 14 +- autotests/testNetconfig/hw.conf | 8 +- .../{ssidTKIP.psk => static.psk} | 0 autotests/testNetconfig/static_test.py | 8 +- autotests/util/hostapd.py | 6 +- 8 files changed, 202 insertions(+), 38 deletions(-) rename autotests/testNetconfig/{ssidTKIP.conf => ap-main.conf} (83%) create mode 100644 autotests/testNetconfig/ap-ns1.conf rename autotests/testNetconfig/{ssidTKIP.psk => static.psk} (100%)