[v3,02/13] auto-t: add association timeout test

Commit Message

James Prestwood Dec. 6, 2023, 8:17 p.m. UTC

This tests ensures IWD disconnects after receiving an association
timeout event. This exposes a current bug where IWD does not
transition to disconnected after an association timeout when
FT-roaming.
---
 autotests/testPSK-roam/failed_roam_test.py | 56 +++++++++++++++-------
 1 file changed, 38 insertions(+), 18 deletions(-)

Patch

diff --git a/autotests/testPSK-roam/failed_roam_test.py b/autotests/testPSK-roam/failed_roam_test.py
index 90f07f6b..d42002d4 100644
--- a/autotests/testPSK-roam/failed_roam_test.py
+++ b/autotests/testPSK-roam/failed_roam_test.py
@@ -46,11 +46,9 @@  class Test(unittest.TestCase):
         self.rule2.enabled = True
         self.rule3.enabled = True
 
-        wd = IWD(True)
+        device = self.wd.list_devices(1)[0]
 
-        device = wd.list_devices(1)[0]
-
-        self.connect(wd, device, self.bss_hostapd[0])
+        self.connect(self.wd, device, self.bss_hostapd[0])
 
         self.rule0.enabled = True
 
@@ -63,10 +61,25 @@  class Test(unittest.TestCase):
 
         # IWD should then try BSS 2, and succeed
         device.wait_for_event('ft-roam', timeout=60)
-        self.verify_roam(wd, device, self.bss_hostapd[0], self.bss_hostapd[2])
+        self.verify_roam(self.wd, device, self.bss_hostapd[0], self.bss_hostapd[2])
 
         self.bss_hostapd[2].deauthenticate(device.address)
 
+    # Tests that an associate even should cause a disconnect
+    def test_ft_over_air_assoc_timeout(self):
+        self.rule2.enabled = True
+        self.rule3.enabled = True
+        self.assoc_rule.enabled = True
+
+        device = self.wd.list_devices(1)[0]
+
+        self.connect(self.wd, device, self.bss_hostapd[0])
+
+        device.wait_for_event('ft-roam', timeout=60)
+
+        condition = 'obj.state == DeviceState.disconnected'
+        self.wd.wait_for_object_condition(device, condition)
+
     # FT-over-Air failure with Invalid PMKID, should reassociate
     def test_ft_over_air_fallback(self):
         self.rule_bss0.signal = -8000
@@ -81,18 +94,16 @@  class Test(unittest.TestCase):
         self.bss_hostapd[2].set_value('ft_psk_generate_local', '0')
         self.bss_hostapd[2].reload()
 
-        wd = IWD(True)
+        device = self.wd.list_devices(1)[0]
 
-        device = wd.list_devices(1)[0]
-
-        self.connect(wd, device, self.bss_hostapd[0])
+        self.connect(self.wd, device, self.bss_hostapd[0])
 
         # IWD should connect, then attempt a roam to BSS 1, which should
         # fail and cause a fallback to reassociation
         device.wait_for_event('ft-fallback-to-reassoc', timeout=60)
         device.wait_for_event('reassoc-roam', timeout=60)
 
-        self.verify_roam(wd, device, self.bss_hostapd[0], self.bss_hostapd[2])
+        self.verify_roam(self.wd, device, self.bss_hostapd[0], self.bss_hostapd[2])
 
         # Trigger another roam
         self.rule_bss2.signal = -8000
@@ -100,11 +111,11 @@  class Test(unittest.TestCase):
         device.wait_for_event('ft-roam', timeout=60)
 
         # Ensure an FT roam back to a properly configured AP works.
-        self.verify_roam(wd, device, self.bss_hostapd[2], self.bss_hostapd[1])
+        self.verify_roam(self.wd, device, self.bss_hostapd[2], self.bss_hostapd[1])
 
         self.bss_hostapd[1].deauthenticate(device.address)
         condition = 'obj.state == DeviceState.disconnected'
-        wd.wait_for_object_condition(device, condition)
+        self.wd.wait_for_object_condition(device, condition)
 
     # FT-over-Air failure with Invalid PMKID. The ranking is such that other
     # FT candidates are available so it should FT elsewhere rather than
@@ -122,11 +133,9 @@  class Test(unittest.TestCase):
         self.bss_hostapd[2].set_value('ft_psk_generate_local', '0')
         self.bss_hostapd[2].reload()
 
-        wd = IWD(True)
+        device = self.wd.list_devices(1)[0]
 
-        device = wd.list_devices(1)[0]
-
-        self.connect(wd, device, self.bss_hostapd[0])
+        self.connect(self.wd, device, self.bss_hostapd[0])
 
         # IWD should connect, then attempt a roam to BSS 1, which should
         # fail and cause the rank to be re-computed. This should then put
@@ -134,12 +143,14 @@  class Test(unittest.TestCase):
         device.wait_for_event('ft-fallback-to-reassoc', timeout=60)
         device.wait_for_event('ft-roam', timeout=60)
 
-        self.verify_roam(wd, device, self.bss_hostapd[0], self.bss_hostapd[1])
+        self.verify_roam(self.wd, device, self.bss_hostapd[0], self.bss_hostapd[1])
 
         self.bss_hostapd[1].deauthenticate(device.address)
         condition = 'obj.state == DeviceState.disconnected'
-        wd.wait_for_object_condition(device, condition)
+        self.wd.wait_for_object_condition(device, condition)
 
+    def setUp(self):
+        self.wd = IWD(True)
 
     def tearDown(self):
         os.system('ip link set "' + self.bss_hostapd[0].ifname + '" down')
@@ -154,10 +165,14 @@  class Test(unittest.TestCase):
         self.rule_bss0.enabled = False
         self.rule_bss1.enabled = False
         self.rule_bss2.enabled = False
+        self.assoc_rule.enabled = False
 
         for hapd in self.bss_hostapd:
             hapd.default()
 
+        self.wd.stop()
+        self.wd = None
+
     @classmethod
     def setUpClass(cls):
         hwsim = Hwsim()
@@ -178,6 +193,11 @@  class Test(unittest.TestCase):
         cls.rule0.prefix = 'b0'
         cls.rule0.drop = True
 
+        # Drop Associate frames
+        cls.assoc_rule = hwsim.rules.create()
+        cls.assoc_rule.prefix = '20'
+        cls.assoc_rule.drop = True
+
         # Drop Action frames
         cls.rule1 = hwsim.rules.create()
         cls.rule1.bidirectional = True