| Message ID | 20221124173932.194654-1-yishaih@nvidia.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add migration PRE_COPY support for mlx5 driver | expand |
On 24/11/2022 19:39, Yishai Hadas wrote: > This series adds migration PRE_COPY uAPIs and their implementation as > part of mlx5 driver. > > The uAPIs follow some discussion that was done in the mailing list [1] > in this area. > > By the time the patches were sent, there was no driver implementation > for the uAPIs, now we have it for mlx5 driver. > > The optional PRE_COPY state opens the saving data transfer FD before > reaching STOP_COPY and allows the device to dirty track the internal > state changes with the general idea to reduce the volume of data > transferred in the STOP_COPY stage. > > While in PRE_COPY the device remains RUNNING, but the saving FD is open. > > A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to > query the progress of the precopy operation in the driver with the idea > it will judge to move to STOP_COPY at least once the initial data set is > transferred, and possibly after the dirty size has shrunk appropriately. > > User space can detect whether PRE_COPY is supported for a given device > by checking the VFIO_MIGRATION_PRE_COPY flag once using the > VFIO_DEVICE_FEATURE_MIGRATION ioctl. > > Extra details exist as part of the specific uAPI patch from the series. > > Finally, we come with mlx5 implementation based on its device > specification for PRE_COPY. > > To support PRE_COPY, mlx5 driver is transferring multiple states > (images) of the device. e.g.: the source VF can save and transfer > multiple states, and the target VF will load them by that order. > > The device is saving three kinds of states: > 1) Initial state - when the device moves to PRE_COPY state. > 2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO, > can be multiple such states. > 3) Final state - when the device moves to STOP_COPY state. > > After moving to PRE_COPY state, the user is holding the saving FD and > should use it for transferring the data from the source to the target > while the VM is still running. From user point of view, it's a stream of > data, however, from mlx5 driver point of view it includes multiple > images/states. For that, it sets some headers with metadata on the > source to be parsed on the target. > > At some point, user may switch the device state from PRE_COPY to > STOP_COPY, this will invoke saving of the final state. > > As discussed earlier in the mailing list, the data that is returned as > part of PRE_COPY is not required to have any bearing relative to the > data size available during the STOP_COPY phase. > > For this, we have the VFIO_DEVICE_FEATURE_MIG_DATA_SIZE option. > > In mlx5 driver we could gain with this series about 20-30 percent > improvement in the downtime compared to the previous code when PRE_COPY > wasn't supported. > > The series includes some pre-patches to be ready for managing multiple > images then it comes with the PRE_COPY implementation itself. > > The matching qemu changes can be previewed here [2]. > > They come on top of the v2 migration protocol patches that were sent > already to the mailing list. > > Note: > As this series includes a net/mlx5 patch, we may need to send it as a > pull request format to VFIO to avoid conflicts before acceptance. > > [1] https://lore.kernel.org/kvm/20220302172903.1995-8-shameerali.kolothum.thodi@huawei.com/ > [2] https://github.com/avihai1122/qemu/commits/mig_v2_precopy > > Changes from V0: https://www.spinics.net/lists/kvm/msg294247.html > > Drop the first 2 patches that Alex merged already. > Refactor mlx5 implementation based on Jason's comments on V0, it includes > the below: > * Refactor the PD usage to be aligned with the migration file life cycle. > * Refactor the MKEY usage to be aligned with the migration file life cycle. > * Refactor the migration file state. > * Use queue based data chunks to simplify the driver code. > * Use the FSM model on the target to simplify the driver code. > * Extend the driver pre_copy header for future use. > > Yishai > > > Jason Gunthorpe (1): > vfio: Extend the device migration protocol with PRE_COPY > > Shay Drory (3): > net/mlx5: Introduce ifc bits for pre_copy > vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error > vfio/mlx5: Enable MIGRATION_PRE_COPY flag > > Yishai Hadas (10): > vfio/mlx5: Enforce a single SAVE command at a time > vfio/mlx5: Refactor PD usage > vfio/mlx5: Refactor MKEY usage > vfio/mlx5: Refactor migration file state > vfio/mlx5: Refactor to use queue based data chunks > vfio/mlx5: Introduce device transitions of PRE_COPY > vfio/mlx5: Introduce SW headers for migration states > vfio/mlx5: Introduce vfio precopy ioctl implementation > vfio/mlx5: Consider temporary end of stream as part of PRE_COPY > vfio/mlx5: Introduce multiple loads > > drivers/vfio/pci/mlx5/cmd.c | 408 ++++++++++++++---- > drivers/vfio/pci/mlx5/cmd.h | 93 ++++- > drivers/vfio/pci/mlx5/main.c | 750 ++++++++++++++++++++++++++++------ > drivers/vfio/vfio_main.c | 74 +++- > include/linux/mlx5/mlx5_ifc.h | 14 +- > include/uapi/linux/vfio.h | 122 +++++- > 6 files changed, 1241 insertions(+), 220 deletions(-) > Hi Alex, Any comments on V1 ? I would like to send V2 very soon with a small fix that was found in patch #9 (see my note in the list). As no comments were published on the UAPI patch so far and the other code is mlx5 driver specific, I believe that V2 can be a merge candidate. Let's try to complete review soon so that we can send a PR for the first net/mlx5 patch, the others should go later on via the vfio tree. By that, we can have in kernel 6.2 feature complete for migration V2 in the UAPI area that were in V1 and we can focus on completing the QEMU side. Thanks, Yishai
This series adds migration PRE_COPY uAPIs and their implementation as part of mlx5 driver. The uAPIs follow some discussion that was done in the mailing list [1] in this area. By the time the patches were sent, there was no driver implementation for the uAPIs, now we have it for mlx5 driver. The optional PRE_COPY state opens the saving data transfer FD before reaching STOP_COPY and allows the device to dirty track the internal state changes with the general idea to reduce the volume of data transferred in the STOP_COPY stage. While in PRE_COPY the device remains RUNNING, but the saving FD is open. A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to query the progress of the precopy operation in the driver with the idea it will judge to move to STOP_COPY at least once the initial data set is transferred, and possibly after the dirty size has shrunk appropriately. User space can detect whether PRE_COPY is supported for a given device by checking the VFIO_MIGRATION_PRE_COPY flag once using the VFIO_DEVICE_FEATURE_MIGRATION ioctl. Extra details exist as part of the specific uAPI patch from the series. Finally, we come with mlx5 implementation based on its device specification for PRE_COPY. To support PRE_COPY, mlx5 driver is transferring multiple states (images) of the device. e.g.: the source VF can save and transfer multiple states, and the target VF will load them by that order. The device is saving three kinds of states: 1) Initial state - when the device moves to PRE_COPY state. 2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO, can be multiple such states. 3) Final state - when the device moves to STOP_COPY state. After moving to PRE_COPY state, the user is holding the saving FD and should use it for transferring the data from the source to the target while the VM is still running. From user point of view, it's a stream of data, however, from mlx5 driver point of view it includes multiple images/states. For that, it sets some headers with metadata on the source to be parsed on the target. At some point, user may switch the device state from PRE_COPY to STOP_COPY, this will invoke saving of the final state. As discussed earlier in the mailing list, the data that is returned as part of PRE_COPY is not required to have any bearing relative to the data size available during the STOP_COPY phase. For this, we have the VFIO_DEVICE_FEATURE_MIG_DATA_SIZE option. In mlx5 driver we could gain with this series about 20-30 percent improvement in the downtime compared to the previous code when PRE_COPY wasn't supported. The series includes some pre-patches to be ready for managing multiple images then it comes with the PRE_COPY implementation itself. The matching qemu changes can be previewed here [2]. They come on top of the v2 migration protocol patches that were sent already to the mailing list. Note: As this series includes a net/mlx5 patch, we may need to send it as a pull request format to VFIO to avoid conflicts before acceptance. [1] https://lore.kernel.org/kvm/20220302172903.1995-8-shameerali.kolothum.thodi@huawei.com/ [2] https://github.com/avihai1122/qemu/commits/mig_v2_precopy Changes from V0: https://www.spinics.net/lists/kvm/msg294247.html Drop the first 2 patches that Alex merged already. Refactor mlx5 implementation based on Jason's comments on V0, it includes the below: * Refactor the PD usage to be aligned with the migration file life cycle. * Refactor the MKEY usage to be aligned with the migration file life cycle. * Refactor the migration file state. * Use queue based data chunks to simplify the driver code. * Use the FSM model on the target to simplify the driver code. * Extend the driver pre_copy header for future use. Yishai Jason Gunthorpe (1): vfio: Extend the device migration protocol with PRE_COPY Shay Drory (3): net/mlx5: Introduce ifc bits for pre_copy vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error vfio/mlx5: Enable MIGRATION_PRE_COPY flag Yishai Hadas (10): vfio/mlx5: Enforce a single SAVE command at a time vfio/mlx5: Refactor PD usage vfio/mlx5: Refactor MKEY usage vfio/mlx5: Refactor migration file state vfio/mlx5: Refactor to use queue based data chunks vfio/mlx5: Introduce device transitions of PRE_COPY vfio/mlx5: Introduce SW headers for migration states vfio/mlx5: Introduce vfio precopy ioctl implementation vfio/mlx5: Consider temporary end of stream as part of PRE_COPY vfio/mlx5: Introduce multiple loads drivers/vfio/pci/mlx5/cmd.c | 408 ++++++++++++++---- drivers/vfio/pci/mlx5/cmd.h | 93 ++++- drivers/vfio/pci/mlx5/main.c | 750 ++++++++++++++++++++++++++++------ drivers/vfio/vfio_main.c | 74 +++- include/linux/mlx5/mlx5_ifc.h | 14 +- include/uapi/linux/vfio.h | 122 +++++- 6 files changed, 1241 insertions(+), 220 deletions(-)