mbox series

[RFC,0/4] Added Interrupt controller emulation for loongarch kvm

Message ID cover.1721186636.git.lixianglai@loongson.cn (mailing list archive)
Headers show
Series Added Interrupt controller emulation for loongarch kvm | expand

Message

Xianglai Li July 17, 2024, 3:29 a.m. UTC
Before this, the interrupt controller simulation has been completed
in the user mode program. In order to reduce the loss caused by frequent
switching of the virtual machine monitor from kernel mode to user mode
when the guest accesses the interrupt controller, we add the interrupt
controller simulation in kvm.

In qemu side implementation is simple, just make a new IPI EXTIOI PCH KVM
related several classes, And the interface to access kvm related data is
implemented.

Most of the simulation work of the interrupt controller is done in kvm.
Because KVM the changes have not been the Linux community acceptance,
the patches of this series will have RFC label until KVM patch into the community.

For the implementation of kvm simulation, refer to the following documents.

IPI simulation implementation reference:
https://github.com/loongson/LoongArch-Documentation/tree/main/docs/Loongson-3A5000-usermanual-EN/inter-processor-interrupts-and-communication

EXTIOI simulation implementation reference:
https://github.com/loongson/LoongArch-Documentation/tree/main/docs/Loongson-3A5000-usermanual-EN/io-interrupts/extended-io-interrupts

PCH-PIC simulation implementation reference:
https://github.com/loongson/LoongArch-Documentation/blob/main/docs/Loongson-7A1000-usermanual-EN/interrupt-controller.adoc

For PCH-MSI, we used irqfd mechanism to send the interrupt signal
generated by user state to kernel state and then to EXTIOI without
maintaining PCH-MSI state in kernel state.

You can easily get the code from the link below:
the kernel:
https://github.com/lixianglai/linux
the branch is: interrupt

the qemu:
https://github.com/lixianglai/qemu
the branch is: interrupt

Please note that the code above is regularly updated based on community
reviews.

Cc: Paolo Bonzini <pbonzini@redhat.com> 
Cc: Song Gao <gaosong@loongson.cn> 
Cc: Huacai Chen <chenhuacai@kernel.org> 
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> 
Cc: "Michael S. Tsirkin" <mst@redhat.com> 
Cc: Cornelia Huck <cohuck@redhat.com> 
Cc: kvm@vger.kernel.org 
Cc: Bibo Mao <maobibo@loongson.cn> 

Xianglai Li (4):
  hw/loongarch: Add KVM IPI device support
  hw/loongarch: Add KVM extioi device support
  hw/loongarch: Add KVM pch pic device support
  hw/loongarch: Add KVM pch msi device support

 hw/intc/Kconfig                     |  12 ++
 hw/intc/loongarch_extioi_kvm.c      | 141 +++++++++++++++++++
 hw/intc/loongarch_ipi_kvm.c         | 207 ++++++++++++++++++++++++++++
 hw/intc/loongarch_pch_msi.c         |  42 ++++--
 hw/intc/loongarch_pch_pic.c         |  20 ++-
 hw/intc/loongarch_pch_pic_kvm.c     | 189 +++++++++++++++++++++++++
 hw/intc/meson.build                 |   3 +
 hw/loongarch/virt.c                 | 141 ++++++++++++-------
 include/hw/intc/loongarch_extioi.h  |  34 ++++-
 include/hw/intc/loongarch_pch_msi.h |   2 +-
 include/hw/intc/loongarch_pch_pic.h |  51 ++++++-
 include/hw/intc/loongson_ipi.h      |  22 +++
 include/hw/loongarch/virt.h         |  15 ++
 linux-headers/asm-loongarch/kvm.h   |   7 +
 linux-headers/linux/kvm.h           |   6 +
 15 files changed, 823 insertions(+), 69 deletions(-)
 create mode 100644 hw/intc/loongarch_extioi_kvm.c
 create mode 100644 hw/intc/loongarch_ipi_kvm.c
 create mode 100644 hw/intc/loongarch_pch_pic_kvm.c

Comments

Cornelia Huck July 17, 2024, 7:58 a.m. UTC | #1
On Wed, Jul 17 2024, Xianglai Li <lixianglai@loongson.cn> wrote:

> Before this, the interrupt controller simulation has been completed
> in the user mode program. In order to reduce the loss caused by frequent
> switching of the virtual machine monitor from kernel mode to user mode
> when the guest accesses the interrupt controller, we add the interrupt
> controller simulation in kvm.
>
> In qemu side implementation is simple, just make a new IPI EXTIOI PCH KVM
> related several classes, And the interface to access kvm related data is
> implemented.
>
> Most of the simulation work of the interrupt controller is done in kvm.
> Because KVM the changes have not been the Linux community acceptance,
> the patches of this series will have RFC label until KVM patch into the community.
>
> For the implementation of kvm simulation, refer to the following documents.
>
> IPI simulation implementation reference:
> https://github.com/loongson/LoongArch-Documentation/tree/main/docs/Loongson-3A5000-usermanual-EN/inter-processor-interrupts-and-communication
>
> EXTIOI simulation implementation reference:
> https://github.com/loongson/LoongArch-Documentation/tree/main/docs/Loongson-3A5000-usermanual-EN/io-interrupts/extended-io-interrupts
>
> PCH-PIC simulation implementation reference:
> https://github.com/loongson/LoongArch-Documentation/blob/main/docs/Loongson-7A1000-usermanual-EN/interrupt-controller.adoc
>
> For PCH-MSI, we used irqfd mechanism to send the interrupt signal
> generated by user state to kernel state and then to EXTIOI without
> maintaining PCH-MSI state in kernel state.
>
> You can easily get the code from the link below:
> the kernel:
> https://github.com/lixianglai/linux
> the branch is: interrupt
>
> the qemu:
> https://github.com/lixianglai/qemu
> the branch is: interrupt
>
> Please note that the code above is regularly updated based on community
> reviews.
>
> Cc: Paolo Bonzini <pbonzini@redhat.com> 
> Cc: Song Gao <gaosong@loongson.cn> 
> Cc: Huacai Chen <chenhuacai@kernel.org> 
> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> 
> Cc: "Michael S. Tsirkin" <mst@redhat.com> 
> Cc: Cornelia Huck <cohuck@redhat.com> 
> Cc: kvm@vger.kernel.org 
> Cc: Bibo Mao <maobibo@loongson.cn> 
>
> Xianglai Li (4):
>   hw/loongarch: Add KVM IPI device support
>   hw/loongarch: Add KVM extioi device support
>   hw/loongarch: Add KVM pch pic device support
>   hw/loongarch: Add KVM pch msi device support
>
>  hw/intc/Kconfig                     |  12 ++
>  hw/intc/loongarch_extioi_kvm.c      | 141 +++++++++++++++++++
>  hw/intc/loongarch_ipi_kvm.c         | 207 ++++++++++++++++++++++++++++
>  hw/intc/loongarch_pch_msi.c         |  42 ++++--
>  hw/intc/loongarch_pch_pic.c         |  20 ++-
>  hw/intc/loongarch_pch_pic_kvm.c     | 189 +++++++++++++++++++++++++
>  hw/intc/meson.build                 |   3 +
>  hw/loongarch/virt.c                 | 141 ++++++++++++-------
>  include/hw/intc/loongarch_extioi.h  |  34 ++++-
>  include/hw/intc/loongarch_pch_msi.h |   2 +-
>  include/hw/intc/loongarch_pch_pic.h |  51 ++++++-
>  include/hw/intc/loongson_ipi.h      |  22 +++
>  include/hw/loongarch/virt.h         |  15 ++
>  linux-headers/asm-loongarch/kvm.h   |   7 +
>  linux-headers/linux/kvm.h           |   6 +

Please split out any headers changes into a separate patch -- just put
them into a placeholder patch at the beginning of the series as long as
the changes are not yet upstream (and replace that with a full headers
sync later.)

>  15 files changed, 823 insertions(+), 69 deletions(-)
>  create mode 100644 hw/intc/loongarch_extioi_kvm.c
>  create mode 100644 hw/intc/loongarch_ipi_kvm.c
>  create mode 100644 hw/intc/loongarch_pch_pic_kvm.c