new file mode 100644
@@ -0,0 +1,187 @@
+#ifndef _ASM_X86_KVM_HYPERV_H
+#define _ASM_X86_KVM_HYPERV_H
+
+#include <linux/types.h>
+
+/*
+ * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
+ * is set by CPUID(HvCpuIdFunctionVersionAndFeatures).
+ */
+#define HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS 0x40000000
+#define HYPERV_CPUID_INTERFACE 0x40000001
+#define HYPERV_CPUID_VERSION 0x40000002
+#define HYPERV_CPUID_FEATURES 0x40000003
+#define HYPERV_CPUID_ENLIGHTMENT_INFO 0x40000004
+#define HYPERV_CPUID_IMPLEMENT_LIMITS 0x40000005
+
+/*
+ * Feature identification. EAX indicates which features are available
+ * to the partition based upon the current partition privileges.
+ */
+
+/* VP Runtime (HV_X64_MSR_VP_RUNTIME) available */
+#define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0)
+/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
+#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
+/*
+ * Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
+ * and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
+ */
+#define HV_X64_MSR_SYNIC_AVAILABLE (1 << 2)
+/*
+ * Synthetic Timer MSRs (HV_X64_MSR_STIMER0_CONFIG through
+ * HV_X64_MSR_STIMER3_COUNT) available
+ */
+#define HV_X64_MSR_SYNTIMER_AVAILABLE (1 << 3)
+/*
+ * APIC access MSRs (HV_X64_MSR_EOI, HV_X64_MSR_ICR and HV_X64_MSR_TPR)
+ * are available
+ */
+#define HV_X64_MSR_APIC_ACCESS_AVAILABLE (1 << 4)
+/* Hypercall MSRs (HV_X64_MSR_GUEST_OS_ID and HV_X64_MSR_HYPERCALL) available*/
+#define HV_X64_MSR_HYPERCALL_AVAILABLE (1 << 5)
+/* Access virtual processor index MSR (HV_X64_MSR_VP_INDEX) available*/
+#define HV_X64_MSR_VP_INDEX_AVAILABLE (1 << 6)
+/* Virtual system reset MSR (HV_X64_MSR_RESET) is available*/
+#define HV_X64_MSR_RESET_AVAILABLE (1 << 7)
+ /*
+ * Access statistics pages MSRs (HV_X64_MSR_STATS_PARTITION_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_PARTITION_INTERNAL_PAGE, HV_X64_MSR_STATS_VP_RETAIL_PAGE,
+ * HV_X64_MSR_STATS_VP_INTERNAL_PAGE) available
+ */
+#define HV_X64_MSR_STAT_PAGES_AVAILABLE (1 << 8)
+
+/*
+ * Feature identification: EBX indicates which flags were specified at
+ * partition creation. The format is the same as the partition creation
+ * flag structure defined in section Partition Creation Flags.
+ */
+#define HV_X64_CREATE_PARTITIONS (1 << 0)
+#define HV_X64_ACCESS_PARTITION_ID (1 << 1)
+#define HV_X64_ACCESS_MEMORY_POOL (1 << 2)
+#define HV_X64_ADJUST_MESSAGE_BUFFERS (1 << 3)
+#define HV_X64_POST_MESSAGES (1 << 4)
+#define HV_X64_SIGNAL_EVENTS (1 << 5)
+#define HV_X64_CREATE_PORT (1 << 6)
+#define HV_X64_CONNECT_PORT (1 << 7)
+#define HV_X64_ACCESS_STATS (1 << 8)
+#define HV_X64_DEBUGGING (1 << 11)
+#define HV_X64_CPU_POWER_MANAGEMENT (1 << 12)
+#define HV_X64_CONFIGURE_PROFILER (1 << 13)
+
+/*
+ * Feature identification. EDX indicates which miscellaneous features
+ * are available to the partition.
+ */
+/* The MWAIT instruction is available (per section MONITOR / MWAIT) */
+#define HV_X64_MWAIT_AVAILABLE (1 << 0)
+/* Guest debugging support is available */
+#define HV_X64_GUEST_DEBUGGING_AVAILABLE (1 << 1)
+/* Performance Monitor support is available*/
+#define HV_X64_PERF_MONITOR_AVAILABLE (1 << 2)
+/* Support for physical CPU dynamic partitioning events is available*/
+#define HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE (1 << 3)
+/*
+ * Support for passing hypercall input parameter block via XMM
+ * registers is available
+ */
+#define HV_X64_HYPERCALL_PARAMS_XMM_AVAILABLE (1 << 4)
+/* Support for a virtual guest idle state is available */
+#define HV_X64_GUEST_IDLE_STATE_AVAILABLE (1 << 5)
+
+/*
+ * Implementation recommendations. Indicates which behaviors the hypervisor
+ * recommends the OS implement for optimal performance.
+ */
+ /*
+ * Recommend using hypercall for address space switches rather
+ * than MOV to CR3 instruction
+ */
+#define HV_X64_MWAIT_RECOMMENDED (1 << 0)
+/* Recommend using hypercall for local TLB flushes rather
+ * than INVLPG or MOV to CR3 instructions */
+#define HV_X64_LOCAL_TLB_FLUSH_RECOMMENDED (1 << 1)
+/*
+ * Recommend using hypercall for remote TLB flushes rather
+ * than inter-processor interrupts
+ */
+#define HV_X64_REMOTE_TLB_FLUSH_RECOMMENDED (1 << 2)
+/*
+ * Recommend using MSRs for accessing APIC registers
+ * EOI, ICR and TPR rather than their memory-mapped counterparts
+ */
+#define HV_X64_APIC_ACCESS_RECOMMENDED (1 << 3)
+/* Recommend using the hypervisor-provided MSR to initiate a system RESET */
+#define HV_X64_SYSTEM_RESET_RECOMMENDED (1 << 4)
+/*
+ * Recommend using relaxed timing for this partition. If used,
+ * the VM should disable any watchdog timeouts that rely on the
+ * timely delivery of external interrupts
+ */
+#define HV_X64_RELAXED_TIMING_RECOMMENDED (1 << 5)
+
+/* MSR used to identify the guest OS. */
+#define HV_X64_MSR_GUEST_OS_ID 0x40000000
+
+/* MSR used to setup pages used to communicate with the hypervisor. */
+#define HV_X64_MSR_HYPERCALL 0x40000001
+
+/* MSR used to provide vcpu index */
+#define HV_X64_MSR_VP_INDEX 0x40000002
+
+/* Define the virtual APIC registers */
+#define HV_X64_MSR_EOI 0x40000070
+#define HV_X64_MSR_ICR 0x40000071
+#define HV_X64_MSR_TPR 0x40000072
+#define HV_X64_MSR_APIC_ASSIST_PAGE 0x40000073
+
+/* Define synthetic interrupt controller model specific registers. */
+#define HV_X64_MSR_SCONTROL 0x40000080
+#define HV_X64_MSR_SVERSION 0x40000081
+#define HV_X64_MSR_SIEFP 0x40000082
+#define HV_X64_MSR_SIMP 0x40000083
+#define HV_X64_MSR_EOM 0x40000084
+#define HV_X64_MSR_SINT0 0x40000090
+#define HV_X64_MSR_SINT1 0x40000091
+#define HV_X64_MSR_SINT2 0x40000092
+#define HV_X64_MSR_SINT3 0x40000093
+#define HV_X64_MSR_SINT4 0x40000094
+#define HV_X64_MSR_SINT5 0x40000095
+#define HV_X64_MSR_SINT6 0x40000096
+#define HV_X64_MSR_SINT7 0x40000097
+#define HV_X64_MSR_SINT8 0x40000098
+#define HV_X64_MSR_SINT9 0x40000099
+#define HV_X64_MSR_SINT10 0x4000009A
+#define HV_X64_MSR_SINT11 0x4000009B
+#define HV_X64_MSR_SINT12 0x4000009C
+#define HV_X64_MSR_SINT13 0x4000009D
+#define HV_X64_MSR_SINT14 0x4000009E
+#define HV_X64_MSR_SINT15 0x4000009F
+
+
+#define HV_X64_MSR_HYPERCALL_ENABLE 0x00000001
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
+
+/* Declare the various hypercall operations. */
+#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT 0x0008
+
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE 0x00000001
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT 12
+#define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_MASK \
+ (~((1ull << HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT) - 1))
+
+#define HV_PROCESSOR_POWER_STATE_C0 0
+#define HV_PROCESSOR_POWER_STATE_C1 1
+#define HV_PROCESSOR_POWER_STATE_C2 2
+#define HV_PROCESSOR_POWER_STATE_C3 3
+
+/* hypercall status code */
+#define HV_STATUS_SUCCESS 0
+#define HV_STATUS_INVALID_HYPERCALL_CODE 2
+#define HV_STATUS_INVALID_HYPERCALL_INPUT 3
+#define HV_STATUS_INVALID_ALIGNMENT 4
+
+#endif
+