new file mode 100644
@@ -0,0 +1,138 @@
+KVM Paravirtual Clocksource driver
+Glauber Costa, Red Hat Inc.
+==================================
+
+1. General Description
+=======================
+
+Keeping time in virtual machine is acknowledged as a hard problem. The most
+basic mode of operation, usually done by older guests, assumes a fixed length
+between timer interrupts. It then counts the number of interrupts and
+calculates elapsed time. This method fails easily in virtual machines, since
+we can't guarantee that the virtual interrupt will be delivered in time.
+
+Another possibility is to emulate modern devices like HPET, or any other we
+see fit. A modern guest which implements something like the clocksource
+infrastructure, can then ask this virtual device about current time when it
+needs to. The problem with this approach, is that it bumps the guest out
+of guest mode operation, and in some cases, even to userspace very frequently.
+
+In this context, the best approach is to provide the guest with a
+virtualization-aware (paravirtual) clock device. It the asks the hypervisor
+about current time, guaranteeing both stable and accurate timekeeping.
+
+2. kvmclock basics
+===========================
+
+When supported by the hypervisor, guests can register a memory page
+to contain kvmclock data. This page has to be present in guest's address space
+throughout its whole life. The hypervisor continues to write to it until it is
+explicitly disabled or the guest is turned off.
+
+2.1 kvmclock availability
+-------------------------
+
+Guests that want to take advantage of kvmclock should first check its
+availability through cpuid.
+
+kvm features are presented to the guest in leaf 0x40000001. Bit 3 indicates
+the present of kvmclock. Bit 0 indicates that kvmclock is present, but the
+old MSR set must be used. See section 2.3 for details.
+
+2.2 kvmclock functionality
+--------------------------
+
+Two MSRs are provided by the hypervisor, controlling kvmclock operation:
+
+ * MSR_KVM_WALL_CLOCK, value 0x4b564d00 and
+ * MSR_KVM_SYSTEM_TIME, value 0x4b564d01.
+
+The first one is only used in rare situations, like boot-time and a
+suspend-resume cycle. Data is disposable, and after used, the guest
+may use it for something else. This is hardly a hot path for anything.
+The Hypervisor fills in the address provided through this MSR with the
+following structure:
+
+struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+} __attribute__((__packed__));
+
+Guest should only trust data to be valid when version haven't changed before
+and after reads of sec and nsec. Besides not changing, it has to be an even
+number. Hypervisor may write an odd number to version field to indicate that
+an update is in progress.
+
+MSR_KVM_SYSTEM_TIME, on the other hand, has persistent data, and is
+constantly updated by the hypervisor with time information. The data
+written in this MSR contains two pieces of information: the address in which
+the guests expects time data to be present 4-byte aligned or'ed with an
+enabled bit. If one wants to shutdown kvmclock, it just needs to write
+anything that has 0 as its last bit.
+
+Time information presented by the hypervisor follows the structure:
+
+struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 pad[3];
+} __attribute__((__packed__));
+
+The version field plays the same role as with the one in struct
+pvclock_wall_clock. The other fields, are:
+
+ a. tsc_timestamp: the guest-visible tsc (result of rdtsc + tsc_offset) of
+ this cpu at the moment we recorded system_time. Note that some time is
+ inevitably spent between system_time and tsc_timestamp measurements.
+ Guests can subtract this quantity from the current value of tsc to obtain
+ a delta to be added to system_time
+
+ b. system_time: this is the most recent host-time we could be provided with.
+ host gets it through ktime_get_ts, using whichever clocksource is
+ registered at the moment
+
+ c. tsc_to_system_mul: this is the number that tsc delta has to be multiplied
+ by in order to obtain time in nanoseconds. Hypervisor is free to change
+ this value in face of events like cpu frequency change, pcpu migration,
+ etc.
+
+ d. tsc_shift: guests must shift
+
+With this information available, guest calculates current time as:
+
+ T = kt + to_nsec(tsc - tsc_0)
+
+2.3 Compatibility MSRs
+----------------------
+
+Guests running on top of older hypervisors may have to use a different set of
+MSRs. This is because originally, kvmclock MSRs were exported within a
+reserved range by accident. Guests should check cpuid leaf 0x40000001 for the
+presence of kvmclock. If bit 3 is disabled, but bit 0 is enabled, guests can
+have access to kvmclock functionality through
+
+ * MSR_KVM_WALL_CLOCK_OLD, value 0x11 and
+ * MSR_KVM_SYSTEM_TIME_OLD, value 0x12.
+
+Note, however, that this is deprecated.
+
+3. Migration
+============
+
+Two ioctls are provided to aid the task of migration:
+
+ * KVM_GET_CLOCK and
+ * KVM_SET_CLOCK
+
+Their aim is to control an offset that can be summed to system_time, in order
+to guarantee monotonicity on the time over guest migration. Source host
+executes KVM_GET_CLOCK, obtaining the last valid timestamp in this host, while
+destination sets it with KVM_SET_CLOCK. It's the destination responsibility to
+never return time that is less than that.
+
+