[PATCHv2,22/23] KVM: x86 emulator: move interruptibility state tracking out of emulator

Commit Message

Gleb Natapov April 28, 2010, 4:15 p.m. UTC

None

Patch

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 4cc8368..e2def3b 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1843,20 +1843,6 @@  static inline int writeback(struct x86_emulate_ctxt *ctxt,
 	return X86EMUL_CONTINUE;
 }
 
-static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
-{
-	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
-	/*
-	 * an sti; sti; sequence only disable interrupts for the first
-	 * instruction. So, if the last instruction, be it emulated or
-	 * not, left the system with the INT_STI flag enabled, it
-	 * means that the last instruction is an sti. We should not
-	 * leave the flag on in this case. The same goes for mov ss
-	 */
-	if (!(int_shadow & mask))
-		ctxt->interruptibility = mask;
-}
-
 static inline void
 setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
 			struct x86_emulate_ops *ops, struct desc_struct *cs,
@@ -2516,7 +2502,6 @@  x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 	int rc = X86EMUL_CONTINUE;
 	int saved_dst_type = c->dst.type;
 
-	ctxt->interruptibility = 0;
 	ctxt->decode.mem_read.pos = 0;
 
 	if (ctxt->mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
@@ -2789,7 +2774,7 @@  special_insn:
 		}
 
 		if (c->modrm_reg == VCPU_SREG_SS)
-			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_MOV_SS);
+			ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
 
 		rc = load_segment_descriptor(ctxt, ops, sel, c->modrm_reg);
 
@@ -2958,7 +2943,7 @@  special_insn:
 		if (emulator_bad_iopl(ctxt, ops))
 			kvm_inject_gp(ctxt->vcpu, 0);
 		else {
-			toggle_interruptibility(ctxt, KVM_X86_SHADOW_INT_STI);
+			ctxt->interruptibility = KVM_X86_SHADOW_INT_STI;
 			ctxt->eflags |= X86_EFLAGS_IF;
 			c->dst.type = OP_NONE;	/* Disable writeback. */
 		}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5fda84e..f7e8732 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3776,12 +3776,26 @@  static void cache_all_regs(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs_dirty = ~0;
 }
 
+static void toggle_interruptibility(struct kvm_vcpu *vcpu, u32 mask)
+{
+	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(vcpu, mask);
+	/*
+	 * an sti; sti; sequence only disable interrupts for the first
+	 * instruction. So, if the last instruction, be it emulated or
+	 * not, left the system with the INT_STI flag enabled, it
+	 * means that the last instruction is an sti. We should not
+	 * leave the flag on in this case. The same goes for mov ss
+	 */
+	if (!(int_shadow & mask))
+		kvm_x86_ops->set_interrupt_shadow(vcpu, mask);
+}
+
 int emulate_instruction(struct kvm_vcpu *vcpu,
 			unsigned long cr2,
 			u16 error_code,
 			int emulation_type)
 {
-	int r, shadow_mask;
+	int r;
 	struct decode_cache *c = &vcpu->arch.emulate_ctxt.decode;
 
 	kvm_clear_exception_queue(vcpu);
@@ -3809,6 +3823,7 @@  int emulate_instruction(struct kvm_vcpu *vcpu,
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 		memset(c, 0, sizeof(struct decode_cache));
 		memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
+		vcpu->arch.emulate_ctxt.interruptibility = 0;
 
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 		trace_kvm_emulate_insn_start(vcpu);
@@ -3876,8 +3891,7 @@  restart:
 		return EMULATE_FAIL;
 	}
 
-	shadow_mask = vcpu->arch.emulate_ctxt.interruptibility;
-	kvm_x86_ops->set_interrupt_shadow(vcpu, shadow_mask);
+	toggle_interruptibility(vcpu, vcpu->arch.emulate_ctxt.interruptibility);
 	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
 	memcpy(vcpu->arch.regs, c->regs, sizeof c->regs);
 	kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.eip);