@@ -386,55 +386,68 @@ variants:
# Exclude jobs that have '(Manual)' in their names
job_filter = ^((?!\(Manual\)).)*$
variants:
- - keyboard:
- # test_device is a regular expression that should match a device's
- # name as it appears in device manager. The first device that matches
- # is used.
- test_device = keyboard
- # Set timeout to 10 hours
- test_timeout = 36000
- dd_data_cat0 = Input\Keyboard
- dd_data_cat1 = Device Fundamentals
- dd_data_cat2 = System Fundamentals\Dynamic Partitioning
- dd_data_prog = InputKbd
- dd_data_desc = Input > Keyboard
- - hdd:
- # Run the tests on a non-system drive
- # (match devices that contain 'QEMU HARDDISK' and do not contain '[C]')
- test_device = ^(?=.*?\bQEMU HARDDISK\b)((?!\[C\]).)*$
- device_data += " ex0 ex1 ex2 ex3"
- dd_data_cat0 = Storage\Device Class\Disk\Disk
- dd_data_cat1 = Storage\Device Class\Disk\Fixed
- dd_data_cat2 = Storage\Device Class\Disk\Bus\ATA
- dd_data_cat3 = Device Fundamentals
- dd_data_prog = StorHDD
- dd_data_desc = Storage > Hard Disk Drive (HDD)
- dd_name_ex0 = Storage_bus_type
- dd_data_ex0 = ATA/ATAPI
- dd_name_ex1 = Hybrid_HDD_Support
- dd_data_ex1 = 0
- dd_name_ex2 = Non_Rotating_Media
- dd_data_ex2 = 0
- dd_name_ex3 = Secure_Storage
- dd_data_ex3 = 0
- # Add a 2nd disk which will become D:
- images += " tmp"
- image_name_tmp = tmp
- image_size_tmp = 4G
- force_create_image_tmp = yes
- # Run diskpart to partition the 2nd disk
- whql_pre_command = "echo select disk=1 > dp.txt && "
- whql_pre_command += "echo create partition primary >> dp.txt && "
- whql_pre_command += "echo assign letter=d >> dp.txt && "
- whql_pre_command += "diskpart /s dp.txt & "
- whql_pre_command += "format d: /fs:ntfs /q /y"
+ - unclassified:
+ dd_data_cat0 = Device Fundamentals
+ dd_data_cat1 = System Fundamentals\Dynamic Partitioning
+ dd_data_prog = Unclassified
+ dd_data_desc = Unclassified
+ dd_data_whqlqual = Unclassified Signature
variants:
- - full:
- # Yes, 100 hours, this is not a mistake
- test_timeout = 360000
- - syscache_test:
- job_filter = syscache test
- test_timeout = 7200
+ - tablet:
+ extra_params += " -usbdevice tablet"
+ test_device = HID-compliant mouse
+ test_timeout = 36000
+ - device:
+ variants:
+ - keyboard:
+ # test_device is a regular expression that should match a device's
+ # name as it appears in device manager. The first device that matches
+ # is used.
+ test_device = keyboard
+ # Set timeout to 10 hours
+ test_timeout = 36000
+ dd_data_cat0 = Input\Keyboard
+ dd_data_cat1 = Device Fundamentals
+ dd_data_cat2 = System Fundamentals\Dynamic Partitioning
+ dd_data_prog = InputKbd
+ dd_data_desc = Input > Keyboard
+ - hdd:
+ # Run the tests on a non-system drive
+ # (match device names that contain 'QEMU HARDDISK' and do not contain '[C]')
+ test_device = ^(?=.*?\bQEMU HARDDISK\b)((?!\[C\]).)*$
+ device_data += " ex0 ex1 ex2 ex3"
+ dd_data_cat0 = Storage\Device Class\Disk\Disk
+ dd_data_cat1 = Storage\Device Class\Disk\Fixed
+ dd_data_cat2 = Storage\Device Class\Disk\Bus\ATA
+ dd_data_cat3 = Device Fundamentals
+ dd_data_prog = StorHDD
+ dd_data_desc = Storage > Hard Disk Drive (HDD)
+ dd_name_ex0 = Storage_bus_type
+ dd_data_ex0 = ATA/ATAPI
+ dd_name_ex1 = Hybrid_HDD_Support
+ dd_data_ex1 = 0
+ dd_name_ex2 = Non_Rotating_Media
+ dd_data_ex2 = 0
+ dd_name_ex3 = Secure_Storage
+ dd_data_ex3 = 0
+ # Add a 2nd disk which will become D:
+ images += " tmp"
+ image_name_tmp = tmp
+ image_size_tmp = 4G
+ force_create_image_tmp = yes
+ # Run diskpart to partition the 2nd disk
+ whql_pre_command = "echo select disk=1 > dp.txt && "
+ whql_pre_command += "echo create partition primary >> dp.txt && "
+ whql_pre_command += "echo assign letter=d >> dp.txt && "
+ whql_pre_command += "diskpart /s dp.txt & "
+ whql_pre_command += "format d: /fs:ntfs /q /y"
+ variants:
+ - full:
+ # Yes, 100 hours, this is not a mistake
+ test_timeout = 360000
+ - syscache_test:
+ job_filter = syscache test
+ test_timeout = 7200
- guest_s4: install setup unattended_install.cdrom
type = guest_s4
@@ -1722,7 +1735,8 @@ variants:
dd_data_logoarch = X86
dd_data_logoos = Windows XP
dd_data_whqlos = Windows XP
- dd_data_whqlqual = Basic
+ device:
+ dd_data_whqlqual = Basic
- 64:
image_name += -64
@@ -1752,7 +1766,8 @@ variants:
dd_data_logoarch = AMD64
dd_data_logoos = Windows XP 64-Bit Edition Version 2003
dd_data_whqlos = Windows XP x64
- dd_data_whqlqual = Basic
+ device:
+ dd_data_whqlqual = Basic
- Win2003:
image_name = win2003
@@ -1786,7 +1801,8 @@ variants:
dd_data_logoarch = X86
dd_data_logoos = Windows Server 2003
dd_data_whqlos = Windows Server 2003
- dd_data_whqlqual = Basic
+ device:
+ dd_data_whqlqual = Basic
- 64:
image_name += -64
@@ -1810,13 +1826,13 @@ variants:
virtio_oemsetup_id = WNET64
virtio_network_path = 'F:\NetKVM\2k3\amd64'
#virtio_network_installer_path = 'F:\RHEV-Network64.msi'
-
whql.submission:
desc_path_desc1 = $\WDK\Logo Type\Device Logo\Windows Server 2003
dd_data_logoarch = AMD64
dd_data_logoos = Windows Server 2003
dd_data_whqlos = Windows Server 2003 x64
- dd_data_whqlqual = Basic
+ device:
+ dd_data_whqlqual = Basic
- WinVista:
image_name = winvista
@@ -1832,7 +1848,8 @@ variants:
dd_data_logoarch = X86
dd_data_logoos = Windows Vista
dd_data_whqlos = Windows Vista Client
- dd_data_whqlqual = Premium
+ device:
+ dd_data_whqlqual = Premium
variants:
- sp1:
image_name += -sp1-32
@@ -1878,7 +1895,8 @@ variants:
dd_data_logoarch = AMD64
dd_data_logoos = Windows Vista
dd_data_whqlos = Windows Vista Client x64
- dd_data_whqlqual = Premium
+ device:
+ dd_data_whqlqual = Premium
variants:
- sp1:
image_name += -sp1-64
@@ -2059,7 +2077,8 @@ variants:
dd_data_logoarch = X86
dd_data_logoos = Windows 7
dd_data_whqlos = Windows 7 Client
- dd_data_whqlqual = Logo
+ device:
+ dd_data_whqlqual = Logo
- 64:
image_name += -64
@@ -2089,7 +2108,8 @@ variants:
dd_data_logoarch = AMD64
dd_data_logoos = Windows 7
dd_data_whqlos = Windows 7 Client x64
- dd_data_whqlqual = Logo
+ device:
+ dd_data_whqlqual = Logo
# Unix/BSD section