| Message ID | 1372743918-12293-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello, On 7/2/2013 7:45 AM, Aneesh Kumar K.V wrote: > From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> > > We want to use CMA for allocating hash page table and real mode area for > PPC64. Hence move DMA contiguous related changes into a seperate config > so that ppc64 can enable CMA without requiring DMA contiguous. > > Acked-by: Michal Nazarewicz <mina86@mina86.com> > Acked-by: Paul Mackerras <paulus@samba.org> > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> OK. It looks that there is not that much that can be easily shared between dma-mapping cma provider and ppc/kvm cma allocator. I would prefer to merge patch 1/4 to my dma-mapping tree, because I plan some significant changes in cma code, see: http://thread.gmane.org/gmane.linux.drivers.devicetree/40013/ I think it is better to keep those changes together. For now I've merged your patch with removed defconfig updates. AFAIK such changes require separate handling to avoid pointless merge conflicts. I've also prepared a topic branch for-v3.12-cma-dma, available at git://git.linaro.org/people/mszyprowski/linux-dma-mapping, which You can merge together with your changes to ppc kernel trees. > --- > arch/arm/configs/omap2plus_defconfig | 2 +- > arch/arm/configs/tegra_defconfig | 2 +- > arch/arm/include/asm/dma-contiguous.h | 2 +- > arch/arm/mm/dma-mapping.c | 6 +++--- > drivers/base/Kconfig | 20 ++++---------------- > drivers/base/Makefile | 2 +- > include/linux/dma-contiguous.h | 2 +- > mm/Kconfig | 24 ++++++++++++++++++++++++ > 8 files changed, 36 insertions(+), 24 deletions(-) > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig > index abbe319..098268f 100644 > --- a/arch/arm/configs/omap2plus_defconfig > +++ b/arch/arm/configs/omap2plus_defconfig > @@ -71,7 +71,7 @@ CONFIG_MAC80211=m > CONFIG_MAC80211_RC_PID=y > CONFIG_MAC80211_RC_DEFAULT_PID=y > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > -CONFIG_CMA=y > +CONFIG_DMA_CMA=y > CONFIG_CONNECTOR=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig > index f7ba3161..34ae8f2 100644 > --- a/arch/arm/configs/tegra_defconfig > +++ b/arch/arm/configs/tegra_defconfig > @@ -79,7 +79,7 @@ CONFIG_RFKILL_GPIO=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > # CONFIG_FIRMWARE_IN_KERNEL is not set > -CONFIG_CMA=y > +CONFIG_DMA_CMA=y > CONFIG_MTD=y > CONFIG_MTD_CHAR=y > CONFIG_MTD_M25P80=y > diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h > index 3ed37b4..e072bb2 100644 > --- a/arch/arm/include/asm/dma-contiguous.h > +++ b/arch/arm/include/asm/dma-contiguous.h > @@ -2,7 +2,7 @@ > #define ASMARM_DMA_CONTIGUOUS_H > > #ifdef __KERNEL__ > -#ifdef CONFIG_CMA > +#ifdef CONFIG_DMA_CMA > > #include <linux/types.h> > #include <asm-generic/dma-contiguous.h> > diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c > index ef3e0f3..1fb40dc 100644 > --- a/arch/arm/mm/dma-mapping.c > +++ b/arch/arm/mm/dma-mapping.c > @@ -358,7 +358,7 @@ static int __init atomic_pool_init(void) > if (!pages) > goto no_pages; > > - if (IS_ENABLED(CONFIG_CMA)) > + if (IS_ENABLED(CONFIG_DMA_CMA)) > ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, > atomic_pool_init); > else > @@ -670,7 +670,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, > addr = __alloc_simple_buffer(dev, size, gfp, &page); > else if (!(gfp & __GFP_WAIT)) > addr = __alloc_from_pool(size, &page); > - else if (!IS_ENABLED(CONFIG_CMA)) > + else if (!IS_ENABLED(CONFIG_DMA_CMA)) > addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); > else > addr = __alloc_from_contiguous(dev, size, prot, &page, caller); > @@ -759,7 +759,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, > __dma_free_buffer(page, size); > } else if (__free_from_pool(cpu_addr, size)) { > return; > - } else if (!IS_ENABLED(CONFIG_CMA)) { > + } else if (!IS_ENABLED(CONFIG_DMA_CMA)) { > __dma_free_remap(cpu_addr, size); > __dma_free_buffer(page, size); > } else { > diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig > index 07abd9d..10cd80a 100644 > --- a/drivers/base/Kconfig > +++ b/drivers/base/Kconfig > @@ -202,11 +202,9 @@ config DMA_SHARED_BUFFER > APIs extension; the file's descriptor can then be passed on to other > driver. > > -config CMA > - bool "Contiguous Memory Allocator" > - depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK > - select MIGRATION > - select MEMORY_ISOLATION > +config DMA_CMA > + bool "DMA Contiguous Memory Allocator" > + depends on HAVE_DMA_CONTIGUOUS && CMA > help > This enables the Contiguous Memory Allocator which allows drivers > to allocate big physically-contiguous blocks of memory for use with > @@ -215,17 +213,7 @@ config CMA > For more information see <include/linux/dma-contiguous.h>. > If unsure, say "n". > > -if CMA > - > -config CMA_DEBUG > - bool "CMA debug messages (DEVELOPMENT)" > - depends on DEBUG_KERNEL > - help > - Turns on debug messages in CMA. This produces KERN_DEBUG > - messages for every CMA call as well as various messages while > - processing calls such as dma_alloc_from_contiguous(). > - This option does not affect warning and error messages. > - > +if DMA_CMA > comment "Default contiguous memory area size:" > > config CMA_SIZE_MBYTES > diff --git a/drivers/base/Makefile b/drivers/base/Makefile > index 4e22ce3..5d93bb5 100644 > --- a/drivers/base/Makefile > +++ b/drivers/base/Makefile > @@ -6,7 +6,7 @@ obj-y := core.o bus.o dd.o syscore.o \ > attribute_container.o transport_class.o \ > topology.o > obj-$(CONFIG_DEVTMPFS) += devtmpfs.o > -obj-$(CONFIG_CMA) += dma-contiguous.o > +obj-$(CONFIG_DMA_CMA) += dma-contiguous.o > obj-y += power/ > obj-$(CONFIG_HAS_DMA) += dma-mapping.o > obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o > diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h > index 01b5c84..00141d3 100644 > --- a/include/linux/dma-contiguous.h > +++ b/include/linux/dma-contiguous.h > @@ -57,7 +57,7 @@ struct cma; > struct page; > struct device; > > -#ifdef CONFIG_CMA > +#ifdef CONFIG_DMA_CMA > > /* > * There is always at least global CMA area and a few optional device > diff --git a/mm/Kconfig b/mm/Kconfig > index e742d06..26a5f81 100644 > --- a/mm/Kconfig > +++ b/mm/Kconfig > @@ -477,3 +477,27 @@ config FRONTSWAP > and swap data is stored as normal on the matching swap device. > > If unsure, say Y to enable frontswap. > + > +config CMA > + bool "Contiguous Memory Allocator" > + depends on HAVE_MEMBLOCK > + select MIGRATION > + select MEMORY_ISOLATION > + help > + This enables the Contiguous Memory Allocator which allows other > + subsystems to allocate big physically-contiguous blocks of memory. > + CMA reserves a region of memory and allows only movable pages to > + be allocated from it. This way, the kernel can use the memory for > + pagecache and when a subsystem requests for contiguous area, the > + allocated pages are migrated away to serve the contiguous request. > + > + If unsure, say "n". > + > +config CMA_DEBUG > + bool "CMA debug messages (DEVELOPMENT)" > + depends on DEBUG_KERNEL && CMA > + help > + Turns on debug messages in CMA. This produces KERN_DEBUG > + messages for every CMA call as well as various messages while > + processing calls such as dma_alloc_from_contiguous(). > + This option does not affect warning and error messages. Best regards
Marek Szyprowski <m.szyprowski@samsung.com> writes: > Hello, > > On 7/2/2013 7:45 AM, Aneesh Kumar K.V wrote: >> From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> >> >> We want to use CMA for allocating hash page table and real mode area for >> PPC64. Hence move DMA contiguous related changes into a seperate config >> so that ppc64 can enable CMA without requiring DMA contiguous. >> >> Acked-by: Michal Nazarewicz <mina86@mina86.com> >> Acked-by: Paul Mackerras <paulus@samba.org> >> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> > > OK. It looks that there is not that much that can be easily shared between > dma-mapping cma provider and ppc/kvm cma allocator. I would prefer to merge > patch 1/4 to my dma-mapping tree, because I plan some significant changes in > cma code, see: > http://thread.gmane.org/gmane.linux.drivers.devicetree/40013/ > I think it is better to keep those changes together. > > For now I've merged your patch with removed defconfig updates. AFAIK such > changes require separate handling to avoid pointless merge conflicts. How do we get the defconfig changes done ? > I've > also prepared a topic branch for-v3.12-cma-dma, available at > git://git.linaro.org/people/mszyprowski/linux-dma-mapping, which You can > merge > together with your changes to ppc kernel trees. > Thanks. Will update accordingly as other patches get picked into respective trees -aneesh -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02.07.2013, at 07:45, Aneesh Kumar K.V wrote: > From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> > > We want to use CMA for allocating hash page table and real mode area for > PPC64. Hence move DMA contiguous related changes into a seperate config > so that ppc64 can enable CMA without requiring DMA contiguous. > > Acked-by: Michal Nazarewicz <mina86@mina86.com> > Acked-by: Paul Mackerras <paulus@samba.org> > Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Thanks, applied all to kvm-ppc-queue. Please provide a cover letter next time :). Alex -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index abbe319..098268f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -71,7 +71,7 @@ CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_CONNECTOR=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index f7ba3161..34ae8f2 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -79,7 +79,7 @@ CONFIG_RFKILL_GPIO=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_CMA=y +CONFIG_DMA_CMA=y CONFIG_MTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y diff --git a/arch/arm/include/asm/dma-contiguous.h b/arch/arm/include/asm/dma-contiguous.h index 3ed37b4..e072bb2 100644 --- a/arch/arm/include/asm/dma-contiguous.h +++ b/arch/arm/include/asm/dma-contiguous.h @@ -2,7 +2,7 @@ #define ASMARM_DMA_CONTIGUOUS_H #ifdef __KERNEL__ -#ifdef CONFIG_CMA +#ifdef CONFIG_DMA_CMA #include <linux/types.h> #include <asm-generic/dma-contiguous.h> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ef3e0f3..1fb40dc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ static int __init atomic_pool_init(void) if (!pages) goto no_pages; - if (IS_ENABLED(CONFIG_CMA)) + if (IS_ENABLED(CONFIG_DMA_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else @@ -670,7 +670,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, addr = __alloc_simple_buffer(dev, size, gfp, &page); else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); - else if (!IS_ENABLED(CONFIG_CMA)) + else if (!IS_ENABLED(CONFIG_DMA_CMA)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page, caller); @@ -759,7 +759,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, __dma_free_buffer(page, size); } else if (__free_from_pool(cpu_addr, size)) { return; - } else if (!IS_ENABLED(CONFIG_CMA)) { + } else if (!IS_ENABLED(CONFIG_DMA_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 07abd9d..10cd80a 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -202,11 +202,9 @@ config DMA_SHARED_BUFFER APIs extension; the file's descriptor can then be passed on to other driver. -config CMA - bool "Contiguous Memory Allocator" - depends on HAVE_DMA_CONTIGUOUS && HAVE_MEMBLOCK - select MIGRATION - select MEMORY_ISOLATION +config DMA_CMA + bool "DMA Contiguous Memory Allocator" + depends on HAVE_DMA_CONTIGUOUS && CMA help This enables the Contiguous Memory Allocator which allows drivers to allocate big physically-contiguous blocks of memory for use with @@ -215,17 +213,7 @@ config CMA For more information see <include/linux/dma-contiguous.h>. If unsure, say "n". -if CMA - -config CMA_DEBUG - bool "CMA debug messages (DEVELOPMENT)" - depends on DEBUG_KERNEL - help - Turns on debug messages in CMA. This produces KERN_DEBUG - messages for every CMA call as well as various messages while - processing calls such as dma_alloc_from_contiguous(). - This option does not affect warning and error messages. - +if DMA_CMA comment "Default contiguous memory area size:" config CMA_SIZE_MBYTES diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 4e22ce3..5d93bb5 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -6,7 +6,7 @@ obj-y := core.o bus.o dd.o syscore.o \ attribute_container.o transport_class.o \ topology.o obj-$(CONFIG_DEVTMPFS) += devtmpfs.o -obj-$(CONFIG_CMA) += dma-contiguous.o +obj-$(CONFIG_DMA_CMA) += dma-contiguous.o obj-y += power/ obj-$(CONFIG_HAS_DMA) += dma-mapping.o obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index 01b5c84..00141d3 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -57,7 +57,7 @@ struct cma; struct page; struct device; -#ifdef CONFIG_CMA +#ifdef CONFIG_DMA_CMA /* * There is always at least global CMA area and a few optional device diff --git a/mm/Kconfig b/mm/Kconfig index e742d06..26a5f81 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -477,3 +477,27 @@ config FRONTSWAP and swap data is stored as normal on the matching swap device. If unsure, say Y to enable frontswap. + +config CMA + bool "Contiguous Memory Allocator" + depends on HAVE_MEMBLOCK + select MIGRATION + select MEMORY_ISOLATION + help + This enables the Contiguous Memory Allocator which allows other + subsystems to allocate big physically-contiguous blocks of memory. + CMA reserves a region of memory and allows only movable pages to + be allocated from it. This way, the kernel can use the memory for + pagecache and when a subsystem requests for contiguous area, the + allocated pages are migrated away to serve the contiguous request. + + If unsure, say "n". + +config CMA_DEBUG + bool "CMA debug messages (DEVELOPMENT)" + depends on DEBUG_KERNEL && CMA + help + Turns on debug messages in CMA. This produces KERN_DEBUG + messages for every CMA call as well as various messages while + processing calls such as dma_alloc_from_contiguous(). + This option does not affect warning and error messages.