[PULL,2/4] KVM: PPC: Book3S HV: Add missing code for transaction reclaim on guest exit

Commit Message

Alexander Graf May 12, 2014, 8:26 p.m. UTC

From: Paul Mackerras <[e-mail]>

Testing by Michael Neuling revealed that commit e4e38121507a ("KVM:
PPC: Book3S HV: Add transactional memory support") is missing the code
that saves away the checkpointed state of the guest when switching to
the host.  This adds that code, which was in earlier versions of the
patch but went missing somehow.

Reported-by: Michael Neuling <[e-mail]>
Signed-off-by: Paul Mackerras <[e-mail]>
Signed-off-by: Alexander Graf <[e-mail]>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 104 ++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

Patch

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index ffbb871..0ff4701 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1312,6 +1312,110 @@  END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 	mr	r3, r9
 	bl	kvmppc_save_fp
 
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+BEGIN_FTR_SECTION
+	b	2f
+END_FTR_SECTION_IFCLR(CPU_FTR_TM)
+	/* Turn on TM. */
+	mfmsr	r8
+	li	r0, 1
+	rldimi	r8, r0, MSR_TM_LG, 63-MSR_TM_LG
+	mtmsrd	r8
+
+	ld	r5, VCPU_MSR(r9)
+	rldicl. r5, r5, 64 - MSR_TS_S_LG, 62
+	beq	1f	/* TM not active in guest. */
+
+	li	r3, TM_CAUSE_KVM_RESCHED
+
+	/* Clear the MSR RI since r1, r13 are all going to be foobar. */
+	li	r5, 0
+	mtmsrd	r5, 1
+
+	/* All GPRs are volatile at this point. */
+	TRECLAIM(R3)
+
+	/* Temporarily store r13 and r9 so we have some regs to play with */
+	SET_SCRATCH0(r13)
+	GET_PACA(r13)
+	std	r9, PACATMSCRATCH(r13)
+	ld	r9, HSTATE_KVM_VCPU(r13)
+
+	/* Get a few more GPRs free. */
+	std	r29, VCPU_GPRS_TM(29)(r9)
+	std	r30, VCPU_GPRS_TM(30)(r9)
+	std	r31, VCPU_GPRS_TM(31)(r9)
+
+	/* Save away PPR and DSCR soon so don't run with user values. */
+	mfspr	r31, SPRN_PPR
+	HMT_MEDIUM
+	mfspr	r30, SPRN_DSCR
+	ld	r29, HSTATE_DSCR(r13)
+	mtspr	SPRN_DSCR, r29
+
+	/* Save all but r9, r13 & r29-r31 */
+	reg = 0
+	.rept	29
+	.if (reg != 9) && (reg != 13)
+	std	reg, VCPU_GPRS_TM(reg)(r9)
+	.endif
+	reg = reg + 1
+	.endr
+	/* ... now save r13 */
+	GET_SCRATCH0(r4)
+	std	r4, VCPU_GPRS_TM(13)(r9)
+	/* ... and save r9 */
+	ld	r4, PACATMSCRATCH(r13)
+	std	r4, VCPU_GPRS_TM(9)(r9)
+
+	/* Reload stack pointer and TOC. */
+	ld	r1, HSTATE_HOST_R1(r13)
+	ld	r2, PACATOC(r13)
+
+	/* Set MSR RI now we have r1 and r13 back. */
+	li	r5, MSR_RI
+	mtmsrd	r5, 1
+
+	/* Save away checkpinted SPRs. */
+	std	r31, VCPU_PPR_TM(r9)
+	std	r30, VCPU_DSCR_TM(r9)
+	mflr	r5
+	mfcr	r6
+	mfctr	r7
+	mfspr	r8, SPRN_AMR
+	mfspr	r10, SPRN_TAR
+	std	r5, VCPU_LR_TM(r9)
+	stw	r6, VCPU_CR_TM(r9)
+	std	r7, VCPU_CTR_TM(r9)
+	std	r8, VCPU_AMR_TM(r9)
+	std	r10, VCPU_TAR_TM(r9)
+
+	/* Restore r12 as trap number. */
+	lwz	r12, VCPU_TRAP(r9)
+
+	/* Save FP/VSX. */
+	addi	r3, r9, VCPU_FPRS_TM
+	bl	.store_fp_state
+	addi	r3, r9, VCPU_VRS_TM
+	bl	.store_vr_state
+	mfspr	r6, SPRN_VRSAVE
+	stw	r6, VCPU_VRSAVE_TM(r9)
+1:
+	/*
+	 * We need to save these SPRs after the treclaim so that the software
+	 * error code is recorded correctly in the TEXASR.  Also the user may
+	 * change these outside of a transaction, so they must always be
+	 * context switched.
+	 */
+	mfspr	r5, SPRN_TFHAR
+	mfspr	r6, SPRN_TFIAR
+	mfspr	r7, SPRN_TEXASR
+	std	r5, VCPU_TFHAR(r9)
+	std	r6, VCPU_TFIAR(r9)
+	std	r7, VCPU_TEXASR(r9)
+2:
+#endif
+
 	/* Increment yield count if they have a VPA */
 	ld	r8, VCPU_VPA(r9)	/* do they have a VPA? */
 	cmpdi	r8, 0