===============
[ Upstream commit b45bacd2d048f405c7760e5cc9b60dd67708734f ]
Writing CP0_Compare clears the timer interrupt pending bit
(CP0_Cause.TI), but this wasn't being done atomically. If a timer
interrupt raced with the write of the guest CP0_Compare, the timer
interrupt could end up being pending even though the new CP0_Compare is
nowhere near CP0_Count.
We were already updating the hrtimer expiry with
kvm_mips_update_hrtimer(), which used both kvm_mips_freeze_hrtimer() and
kvm_mips_resume_hrtimer(). Close the race window by expanding out
kvm_mips_update_hrtimer(), and clearing CP0_Cause.TI and setting
CP0_Compare between the freeze and resume. Since the pending timer
interrupt should not be cleared when CP0_Compare is written via the KVM
user API, an ack argument is added to distinguish the source of the
write.
Fixes: e30492bbe95a ("MIPS: KVM: Rewrite count/compare timer emulation")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim KrÄmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.16.x-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
arch/mips/include/asm/kvm_host.h | 2 +-
arch/mips/kvm/emulate.c | 61 ++++++++++++++++++----------------------
arch/mips/kvm/trap_emul.c | 2 +-
3 files changed, 29 insertions(+), 36 deletions(-)
@@ -717,7 +717,7 @@ extern enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu);
void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count);
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare);
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack);
void kvm_mips_init_count(struct kvm_vcpu *vcpu);
int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl);
int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume);
@@ -438,32 +438,6 @@ static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu,
}
/**
- * kvm_mips_update_hrtimer() - Update next expiry time of hrtimer.
- * @vcpu: Virtual CPU.
- *
- * Recalculates and updates the expiry time of the hrtimer. This can be used
- * after timer parameters have been altered which do not depend on the time that
- * the change occurs (in those cases kvm_mips_freeze_hrtimer() and
- * kvm_mips_resume_hrtimer() are used directly).
- *
- * It is guaranteed that no timer interrupts will be lost in the process.
- *
- * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running).
- */
-static void kvm_mips_update_hrtimer(struct kvm_vcpu *vcpu)
-{
- ktime_t now;
- uint32_t count;
-
- /*
- * freeze_hrtimer takes care of a timer interrupts <= count, and
- * resume_hrtimer the hrtimer takes care of a timer interrupts > count.
- */
- now = kvm_mips_freeze_hrtimer(vcpu, &count);
- kvm_mips_resume_hrtimer(vcpu, now, count);
-}
-
-/**
* kvm_mips_write_count() - Modify the count and update timer.
* @vcpu: Virtual CPU.
* @count: Guest CP0_Count value to set.
@@ -558,23 +532,42 @@ int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz)
* kvm_mips_write_compare() - Modify compare and update timer.
* @vcpu: Virtual CPU.
* @compare: New CP0_Compare value.
+ * @ack: Whether to acknowledge timer interrupt.
*
* Update CP0_Compare to a new value and update the timeout.
+ * If @ack, atomically acknowledge any pending timer interrupt, otherwise ensure
+ * any pending timer interrupt is preserved.
*/
-void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare)
+void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare, bool ack)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
+ int dc;
+ u32 old_compare = kvm_read_c0_guest_compare(cop0);
+ ktime_t now;
+ uint32_t count;
/* if unchanged, must just be an ack */
- if (kvm_read_c0_guest_compare(cop0) == compare)
+ if (old_compare == compare) {
+ if (!ack)
+ return;
+ kvm_mips_callbacks->dequeue_timer_int(vcpu);
+ kvm_write_c0_guest_compare(cop0, compare);
return;
+ }
+
+ /* freeze_hrtimer() takes care of timer interrupts <= count */
+ dc = kvm_mips_count_disabled(vcpu);
+ if (!dc)
+ now = kvm_mips_freeze_hrtimer(vcpu, &count);
+
+ if (ack)
+ kvm_mips_callbacks->dequeue_timer_int(vcpu);
- /* Update compare */
kvm_write_c0_guest_compare(cop0, compare);
- /* Update timeout if count enabled */
- if (!kvm_mips_count_disabled(vcpu))
- kvm_mips_update_hrtimer(vcpu);
+ /* resume_hrtimer() takes care of timer interrupts > count */
+ if (!dc)
+ kvm_mips_resume_hrtimer(vcpu, now, count);
}
/**
@@ -1035,9 +1028,9 @@ enum emulation_result kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc,
/* If we are writing to COMPARE */
/* Clear pending timer interrupt, if any */
- kvm_mips_callbacks->dequeue_timer_int(vcpu);
kvm_mips_write_compare(vcpu,
- vcpu->arch.gprs[rt]);
+ vcpu->arch.gprs[rt],
+ true);
} else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) {
kvm_write_c0_guest_status(cop0,
vcpu->arch.gprs[rt]);
@@ -449,7 +449,7 @@ static int kvm_trap_emul_set_one_reg(struct kvm_vcpu *vcpu,
kvm_mips_write_count(vcpu, v);
break;
case KVM_REG_MIPS_CP0_COMPARE:
- kvm_mips_write_compare(vcpu, v);
+ kvm_mips_write_compare(vcpu, v, false);
break;
case KVM_REG_MIPS_CP0_CAUSE:
/*
From: James Hogan <james.hogan@imgtec.com> This patch has been added to the 3.18 stable tree. If you have any objections, please let us know.