@@ -454,13 +454,23 @@ void __init mmu_partition_table_init(void)
void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0,
unsigned long dw1)
{
+ unsigned long old = be64_to_cpu(partition_tb[lpid].patb0);
+
partition_tb[lpid].patb0 = cpu_to_be64(dw0);
partition_tb[lpid].patb1 = cpu_to_be64(dw1);
- /* Global flush of TLBs and partition table caches for this lpid */
+ /*
+ * Global flush of TLBs and partition table caches for this lpid.
+ * The type of flush (hash or radix) depends on what the previous
+ * use of this partition ID was, not the new use.
+ */
asm volatile("ptesync" : : : "memory");
- asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
- "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ if (old & PATB_HR)
+ asm volatile(PPC_TLBIE_5(%0,%1,2,0,1) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ else
+ asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
}
EXPORT_SYMBOL_GPL(mmu_partition_table_set_entry);
When changing a partition table entry on POWER9, we do a particular form of the tlbie instruction which flushes all TLBs and caches of the partition table for a given logical partition ID (LPID). This instruction has a field in the instruction word, labelled R (radix), which should be 1 if the partition was previously a radix partition and 0 if it was a HPT partition. This implements that logic. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> --- arch/powerpc/mm/pgtable_64.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)