diff mbox series

[v3,26/33] KVM: PPC: Book3S HV: Don't access HFSCR, LPIDR or LPCR when running nested

Message ID 1538479892-14835-27-git-send-email-paulus@ozlabs.org (mailing list archive)
State New, archived
Headers show
Series KVM: PPC: Book3S HV: Nested HV virtualization | expand

Commit Message

Paul Mackerras Oct. 2, 2018, 11:31 a.m. UTC 
When running as a nested hypervisor, this avoids reading hypervisor
privileged registers (specifically HFSCR, LPIDR and LPCR) at startup;
instead reasonable default values are used.  This also avoids writing
LPIDR in the single-vcpu entry/exit path.

Also, this removes the check for CPU_FTR_HVMODE in kvmppc_mmu_hv_init()
since its only caller already checks this.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
 arch/powerpc/kvm/book3s_64_mmu_hv.c |  7 +++----
 arch/powerpc/kvm/book3s_hv.c        | 33 +++++++++++++++++++++------------
 2 files changed, 24 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 68e14af..c615617 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -268,14 +268,13 @@  int kvmppc_mmu_hv_init(void)
 {
 	unsigned long host_lpid, rsvd_lpid;
 
-	if (!cpu_has_feature(CPU_FTR_HVMODE))
-		return -EINVAL;
-
 	if (!mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE))
 		return -EINVAL;
 
 	/* POWER7 has 10-bit LPIDs (12-bit in POWER8) */
-	host_lpid = mfspr(SPRN_LPID);
+	host_lpid = 0;
+	if (cpu_has_feature(CPU_FTR_HVMODE))
+		host_lpid = mfspr(SPRN_LPID);
 	rsvd_lpid = LPID_RSVD;
 
 	kvmppc_init_lpid(rsvd_lpid + 1);
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index c87d3d0..120a82c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2197,15 +2197,18 @@  static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm,
 	 * Set the default HFSCR for the guest from the host value.
 	 * This value is only used on POWER9.
 	 * On POWER9, we want to virtualize the doorbell facility, so we
-	 * turn off the HFSCR bit, which causes those instructions to trap.
+	 * don't set the HFSCR_MSGP bit, and that causes those instructions
+	 * to trap and then we emulate them.
 	 */
-	vcpu->arch.hfscr = mfspr(SPRN_HFSCR);
-	if (cpu_has_feature(CPU_FTR_P9_TM_HV_ASSIST))
+	vcpu->arch.hfscr = HFSCR_TAR | HFSCR_EBB | HFSCR_PM | HFSCR_BHRB |
+		HFSCR_DSCR | HFSCR_VECVSX | HFSCR_FP;
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		vcpu->arch.hfscr &= mfspr(SPRN_HFSCR);
+		if (cpu_has_feature(CPU_FTR_P9_TM_HV_ASSIST))
+			vcpu->arch.hfscr |= HFSCR_TM;
+	}
+	if (cpu_has_feature(CPU_FTR_TM_COMP))
 		vcpu->arch.hfscr |= HFSCR_TM;
-	else if (!cpu_has_feature(CPU_FTR_TM_COMP))
-		vcpu->arch.hfscr &= ~HFSCR_TM;
-	if (cpu_has_feature(CPU_FTR_ARCH_300))
-		vcpu->arch.hfscr &= ~HFSCR_MSGP;
 
 	kvmppc_mmu_book3s_hv_init(vcpu);
 
@@ -4024,8 +4027,10 @@  int kvmhv_run_single_vcpu(struct kvm_run *kvm_run,
 
 	srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
 
-	mtspr(SPRN_LPID, vc->kvm->arch.host_lpid);
-	isync();
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		mtspr(SPRN_LPID, vc->kvm->arch.host_lpid);
+		isync();
+	}
 
 	trace_hardirqs_off();
 	set_irq_happened(trap);
@@ -4645,9 +4650,13 @@  static int kvmppc_core_init_vm_hv(struct kvm *kvm)
 		kvm->arch.host_sdr1 = mfspr(SPRN_SDR1);
 
 	/* Init LPCR for virtual RMA mode */
-	kvm->arch.host_lpid = mfspr(SPRN_LPID);
-	kvm->arch.host_lpcr = lpcr = mfspr(SPRN_LPCR);
-	lpcr &= LPCR_PECE | LPCR_LPES;
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		kvm->arch.host_lpid = mfspr(SPRN_LPID);
+		kvm->arch.host_lpcr = lpcr = mfspr(SPRN_LPCR);
+		lpcr &= LPCR_PECE | LPCR_LPES;
+	} else {
+		lpcr = 0;
+	}
 	lpcr |= (4UL << LPCR_DPFD_SH) | LPCR_HDICE |
 		LPCR_VPM0 | LPCR_VPM1;
 	kvm->arch.vrma_slb_v = SLB_VSID_B_1T |