@@ -549,11 +549,9 @@ static u64 mmu_spte_update_no_track(u64 *sptep, u64 new_spte)
/* Rules for using mmu_spte_update:
* Update the state bits, it means the mapped pfn is not changed.
*
- * Whenever we overwrite a writable spte with a read-only one we
- * should flush remote TLBs. Otherwise rmap_write_protect
- * will find a read-only spte, even though the writable spte
- * might be cached on a CPU's TLB, the return value indicates this
- * case.
+ * Whenever an MMU-writable SPTE is overwritten with a read-only SPTE, remote
+ * TLBs must be flushed. Otherwise rmap_write_protect will find a read-only
+ * spte, even though the writable spte might be cached on a CPU's TLB.
*
* Returns true if the TLB needs to be flushed
*/
@@ -5847,7 +5845,7 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
* will clear a separate software-only bit (MMU-writable) and skip the
* flush if-and-only-if this bit was already clear.
*
- * See DEFAULT_SPTE_MMU_WRITABLE for more details.
+ * See is_writable_pte() for more details.
*/
if (flush)
kvm_arch_flush_remote_tlbs_memslot(kvm, memslot);
@@ -75,28 +75,8 @@ static_assert(SPTE_TDP_AD_ENABLED_MASK == 0);
static_assert(!(SPTE_TDP_AD_MASK & SHADOW_ACC_TRACK_SAVED_MASK));
/*
- * *_SPTE_HOST_WRITABLE (aka Host-writable) indicates whether the host permits
- * writes to the guest page mapped by the SPTE. This bit is cleared on SPTEs
- * that map guest pages in read-only memslots and read-only VMAs.
- *
- * Invariants:
- * - If Host-writable is clear, PT_WRITABLE_MASK must be clear.
- *
- *
- * *_SPTE_MMU_WRITABLE (aka MMU-writable) indicates whether the shadow MMU
- * allows writes to the guest page mapped by the SPTE. This bit is cleared when
- * the guest page mapped by the SPTE contains a page table that is being
- * monitored for shadow paging. In this case the SPTE can only be made writable
- * by unsyncing the shadow page under the mmu_lock.
- *
- * Invariants:
- * - If MMU-writable is clear, PT_WRITABLE_MASK must be clear.
- * - If MMU-writable is set, Host-writable must be set.
- *
- * If MMU-writable is set, PT_WRITABLE_MASK is normally set but can be cleared
- * to track writes for dirty logging. For such SPTEs, KVM will locklessly set
- * PT_WRITABLE_MASK upon the next write from the guest and record the write in
- * the dirty log (see fast_page_fault()).
+ * {DEFAULT,EPT}_SPTE_{HOST,MMU}_WRITABLE are used to keep track of why a given
+ * SPTE is write-protected. See is_writable_pte() for details.
*/
/* Bits 9 and 10 are ignored by all non-EPT PTEs. */
@@ -340,37 +320,64 @@ static __always_inline bool is_rsvd_spte(struct rsvd_bits_validate *rsvd_check,
}
/*
- * Currently, we have two sorts of write-protection, a) the first one
- * write-protects guest page to sync the guest modification, b) another one is
- * used to sync dirty bitmap when we do KVM_GET_DIRTY_LOG. The differences
- * between these two sorts are:
- * 1) the first case clears MMU-writable bit.
- * 2) the first case requires flushing tlb immediately avoiding corrupting
- * shadow page table between all vcpus so it should be in the protection of
- * mmu-lock. And the another case does not need to flush tlb until returning
- * the dirty bitmap to userspace since it only write-protects the page
- * logged in the bitmap, that means the page in the dirty bitmap is not
- * missed, so it can flush tlb out of mmu-lock.
+ * An shadow-present leaf SPTE may be non-writable for 3 possible reasons:
+ *
+ * 1. To intercept writes for dirty logging. KVM write-protects huge pages
+ * so that they can be split be split down into the dirty logging
+ * granularity (4KiB) whenever the guest writes to them. KVM also
+ * write-protects 4KiB pages so that writes can be recorded in the dirty log
+ * (e.g. if not using PML). SPTEs are write-protected for dirty logging
+ * during the VM-iotcls that enable dirty logging.
+ *
+ * 2. To intercept writes to guest page tables that KVM is shadowing. When a
+ * guest writes to its page table the corresponding shadow page table will
+ * be marked "unsync". That way KVM knows which shadow page tables need to
+ * be updated on the next TLB flush, INVLPG, etc. and which do not.
+ *
+ * 3. To prevent guest writes to read-only memory, such as for memory in a
+ * read-only memslot or guest memory backed by a read-only VMA. Writes to
+ * such pages are disallowed entirely.
+ *
+ * To keep track of why a given SPTE is write-protected, KVM uses 2
+ * software-only bits in the SPTE:
+ *
+ * shadow_mmu_writable_mask, aka MMU-writable -
+ * Cleared on SPTEs that KVM is currently write-protecting for shadow paging
+ * purposes (case 2 above).
+ *
+ * shadow_host_writable_mask, aka Host-writable -
+ * Cleared on SPTEs that are not host-writable (case 3 above)
+ *
+ * Note, not all possible combinations of PT_WRITABLE_MASK,
+ * shadow_mmu_writable_mask, and shadow_host_writable_mask are valid. A given
+ * SPTE can be in only one of the following states, which map to the
+ * aforementioned 3 cases:
+ *
+ * shadow_host_writable_mask | shadow_mmu_writable_mask | PT_WRITABLE_MASK
+ * ------------------------- | ------------------------ | ----------------
+ * 1 | 1 | 1 (writable)
+ * 1 | 1 | 0 (case 1)
+ * 1 | 0 | 0 (case 2)
+ * 0 | 0 | 0 (case 3)
*
- * So, there is the problem: the first case can meet the corrupted tlb caused
- * by another case which write-protects pages but without flush tlb
- * immediately. In order to making the first case be aware this problem we let
- * it flush tlb if we try to write-protect a spte whose MMU-writable bit
- * is set, it works since another case never touches MMU-writable bit.
+ * The valid combinations of these bits are checked by
+ * check_spte_writable_invariants() whenever an SPTE is modified.
*
- * Anyway, whenever a spte is updated (only permission and status bits are
- * changed) we need to check whether the spte with MMU-writable becomes
- * readonly, if that happens, we need to flush tlb. Fortunately,
- * mmu_spte_update() has already handled it perfectly.
+ * Clearing the MMU-writable bit is always done under the MMU lock and always
+ * accompanied by a TLB flush before dropping the lock to avoid corrupting the
+ * shadow page tables between vCPUs. Write-protecting an SPTE for dirty logging
+ * (which does not clear the MMU-writable bit), does not flush TLBs before
+ * dropping the lock, as it only needs to synchronize guest writes with the
+ * dirty bitmap.
*
- * The rules to use MMU-writable and PT_WRITABLE_MASK:
- * - if we want to see if it has writable tlb entry or if the spte can be
- * writable on the mmu mapping, check MMU-writable, this is the most
- * case, otherwise
- * - if we fix page fault on the spte or do write-protection by dirty logging,
- * check PT_WRITABLE_MASK.
+ * So, there is the problem: clearing the MMU-writable bit can encounter a
+ * write-protected SPTE while CPUs still have writable mappings for that SPTE
+ * cached in their TLB. To address this, KVM always flushes TLBs when
+ * write-protecting SPTEs if the MMU-writable bit is set on the old SPTE.
*
- * TODO: introduce APIs to split these two cases.
+ * The Host-writable bit is not modified on present SPTEs, it is only set or
+ * cleared when an SPTE is first faulted in from non-present and then remains
+ * immutable.
*/
static inline bool is_writable_pte(unsigned long pte)
{
Consolidate the large comment above DEFAULT_SPTE_HOST_WRITABLE with the large comment above is_writable_pte() into one comment. This comment explains the different reasons why an SPTE may be non-writable and KVM keeps track of that with the {Host,MMU}-writable bits. No functional change intended. Signed-off-by: David Matlack <dmatlack@google.com> --- arch/x86/kvm/mmu/mmu.c | 10 ++-- arch/x86/kvm/mmu/spte.h | 105 +++++++++++++++++++++------------------- 2 files changed, 60 insertions(+), 55 deletions(-)