| Message ID | 20220510144724.3321985-2-seiden@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | s390: Ultravisor device | expand |
On Tue, 10 May 2022 14:47:23 +0000 Steffen Eiden <seiden@linux.ibm.com> wrote: > This patch adds a new miscdevice to expose some Ultravisor functions > to userspace. Userspace can send IOCTLs to the uvdevice that will then > emit a corresponding Ultravisor Call and hands the result over to > userspace. The uvdevice is available if the Ultravisor Call facility is > present. > Userspace can call the Retrieve Attestation Measurement > Ultravisor Call using IOCTLs on the uvdevice. > > The uvdevice will do some sanity checks first. > Then, copy the request data to kernel space, build the UVCB, > perform the UV call, and copy the result back to userspace. > > Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> > Reviewed-by: Janosch Frank <frankja@linux.ibm.com> > --- > MAINTAINERS | 2 + > arch/s390/include/asm/uv.h | 23 ++- > arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ > drivers/s390/char/Kconfig | 10 + > drivers/s390/char/Makefile | 1 + > drivers/s390/char/uvdevice.c | 264 ++++++++++++++++++++++++++ > 6 files changed, 350 insertions(+), 1 deletion(-) > create mode 100644 arch/s390/include/uapi/asm/uvdevice.h > create mode 100644 drivers/s390/char/uvdevice.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e8c52d0192a6..b42ab4a35e18 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -10781,9 +10781,11 @@ F: Documentation/virt/kvm/s390* > F: arch/s390/include/asm/gmap.h > F: arch/s390/include/asm/kvm* > F: arch/s390/include/uapi/asm/kvm* > +F: arch/s390/include/uapi/asm/uvdevice.h > F: arch/s390/kernel/uv.c > F: arch/s390/kvm/ > F: arch/s390/mm/gmap.c > +F: drivers/s390/char/uvdevice.c > F: tools/testing/selftests/kvm/*/s390x/ > F: tools/testing/selftests/kvm/s390x/ > > diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h > index a2d376b8bce3..cfea7b77a5b8 100644 > --- a/arch/s390/include/asm/uv.h > +++ b/arch/s390/include/asm/uv.h > @@ -2,7 +2,7 @@ > /* > * Ultravisor Interfaces > * > - * Copyright IBM Corp. 2019 > + * Copyright IBM Corp. 2019, 2022 > * > * Author(s): > * Vasily Gorbik <gor@linux.ibm.com> > @@ -52,6 +52,7 @@ > #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342 > #define UVC_CMD_SET_SHARED_ACCESS 0x1000 > #define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001 > +#define UVC_CMD_RETR_ATTEST 0x1020 > > /* Bits in installed uv calls */ > enum uv_cmds_inst { > @@ -76,6 +77,7 @@ enum uv_cmds_inst { > BIT_UVC_CMD_UNSHARE_ALL = 20, > BIT_UVC_CMD_PIN_PAGE_SHARED = 21, > BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22, > + BIT_UVC_CMD_RETR_ATTEST = 28, > }; > > enum uv_feat_ind { > @@ -219,6 +221,25 @@ struct uv_cb_share { > u64 reserved28; > } __packed __aligned(8); > > +/* Retrieve Attestation Measurement */ > +struct uv_cb_attest { > + struct uv_cb_header header; /* 0x0000 */ > + u64 reserved08[2]; /* 0x0008 */ > + u64 arcb_addr; /* 0x0018 */ > + u64 cont_token; /* 0x0020 */ > + u8 reserved28[6]; /* 0x0028 */ > + u16 user_data_len; /* 0x002e */ > + u8 user_data[256]; /* 0x0030 */ > + u32 reserved130[3]; /* 0x0130 */ > + u32 meas_len; /* 0x013c */ > + u64 meas_addr; /* 0x0140 */ > + u8 config_uid[16]; /* 0x0148 */ > + u32 reserved158; /* 0x0158 */ > + u32 add_data_len; /* 0x015c */ > + u64 add_data_addr; /* 0x0160 */ > + u64 reserved168[4]; /* 0x0168 */ > +} __packed __aligned(8); > + > static inline int __uv_call(unsigned long r1, unsigned long r2) > { > int cc; > diff --git a/arch/s390/include/uapi/asm/uvdevice.h b/arch/s390/include/uapi/asm/uvdevice.h > new file mode 100644 > index 000000000000..d0bdde4969a1 > --- /dev/null > +++ b/arch/s390/include/uapi/asm/uvdevice.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ > +/* > + * Copyright IBM Corp. 2022 > + * Author(s): Steffen Eiden <seiden@linux.ibm.com> > + */ > +#ifndef __S390_ASM_UVDEVICE_H > +#define __S390_ASM_UVDEVICE_H > + > +#include <linux/types.h> > + > +struct uvio_ioctl_cb { > + __u32 flags; > + __u16 uv_rc; /* UV header rc value */ > + __u16 uv_rrc; /* UV header rrc value */ > + __u64 argument_addr; /* Userspace address of uvio argument */ > + __u32 argument_len; > + __u8 reserved14[0x40 - 0x14]; /* must be zero */ > +}; > + > +#define UVIO_ATT_USER_DATA_LEN 0x100 > +#define UVIO_ATT_UID_LEN 0x10 > +struct uvio_attest { > + __u64 arcb_addr; /* 0x0000 */ > + __u64 meas_addr; /* 0x0008 */ > + __u64 add_data_addr; /* 0x0010 */ > + __u8 user_data[UVIO_ATT_USER_DATA_LEN]; /* 0x0018 */ > + __u8 config_uid[UVIO_ATT_UID_LEN]; /* 0x0118 */ > + __u32 arcb_len; /* 0x0128 */ > + __u32 meas_len; /* 0x012c */ > + __u32 add_data_len; /* 0x0130 */ > + __u16 user_data_len; /* 0x0134 */ > + __u16 reserved136; /* 0x0136 */ > +}; > + > +/* > + * The following max values define an upper length for the IOCTL in/out buffers. > + * However, they do not represent the maximum the Ultravisor allows which is > + * often way smaller. By allowing larger buffer sizes we hopefully do not need > + * to update the code with every machine update. It is therefore possible for > + * userspace to request more memory than actually used by kernel/UV. > + */ > +#define UVIO_ATT_ARCB_MAX_LEN 0x100000 > +#define UVIO_ATT_MEASUREMENT_MAX_LEN 0x8000 > +#define UVIO_ATT_ADDITIONAL_MAX_LEN 0x8000 > + > +#define UVIO_DEVICE_NAME "uv" > +#define UVIO_TYPE_UVC 'u' > + > +#define UVIO_IOCTL_ATT _IOWR(UVIO_TYPE_UVC, 0x01, struct uvio_ioctl_cb) > + > +#endif /* __S390_ASM_UVDEVICE_H */ > diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig > index 6cc4b19acf85..e9b9902abbaf 100644 > --- a/drivers/s390/char/Kconfig > +++ b/drivers/s390/char/Kconfig > @@ -100,6 +100,16 @@ config SCLP_OFB > This option enables the Open-for-Business interface to the s390 > Service Element. > > +config S390_UV_UAPI > + def_tristate y > + prompt "Ultravisor userspace API" > + help > + Selecting exposes parts of the UV interface to userspace > + by providing a misc character device at /dev/uv. > + Using IOCTLs one can interact with the UV. > + The device is only available if the Ultravisor > + Facility (158) is present. > + > config S390_TAPE > def_tristate m > prompt "S/390 tape device support" > diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile > index c6fdb81a068a..ce32270082f5 100644 > --- a/drivers/s390/char/Makefile > +++ b/drivers/s390/char/Makefile > @@ -48,6 +48,7 @@ obj-$(CONFIG_MONREADER) += monreader.o > obj-$(CONFIG_MONWRITER) += monwriter.o > obj-$(CONFIG_S390_VMUR) += vmur.o > obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o > +obj-$(CONFIG_S390_UV_UAPI) += uvdevice.o > > hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o > obj-$(CONFIG_HMC_DRV) += hmcdrv.o > diff --git a/drivers/s390/char/uvdevice.c b/drivers/s390/char/uvdevice.c > new file mode 100644 > index 000000000000..bcada86e8fc4 > --- /dev/null > +++ b/drivers/s390/char/uvdevice.c > @@ -0,0 +1,264 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright IBM Corp. 2022 > + * Author(s): Steffen Eiden <seiden@linux.ibm.com> > + * > + * This file provides a Linux misc device to give userspace access to some > + * Ultravisor (UV) functions. The device only accepts IOCTLs and will only > + * be present if the Ultravisor facility (158) is present. > + * > + * When userspace sends a valid IOCTL uvdevice will copy the input data to > + * kernel space, do some basic validity checks to avoid kernel/system > + * corruption. Any other check that the Ultravisor does will not be done by > + * the uvdevice to keep changes minimal when adding new functionalities > + * to existing UV-calls. > + * After the checks uvdevice builds a corresponding > + * Ultravisor Call Control Block, and sends the request to the Ultravisor. > + * Then, it copies the response, including the return codes, back to userspace. > + * It is the responsibility of the userspace to check for any error issued > + * by UV and to interpret the UV response. The uvdevice acts as a communication > + * channel for userspace to the Ultravisor. > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/miscdevice.h> > +#include <linux/types.h> > +#include <linux/stddef.h> > +#include <linux/vmalloc.h> > +#include <linux/slab.h> > + > +#include <asm/uvdevice.h> > +#include <asm/uv.h> > + > +static int uvio_build_uvcb_attest(struct uv_cb_attest *uvcb_attest, u8 *arcb, > + u8 *meas, u8 *add_data, struct uvio_attest *uvio_attest) > +{ > + void __user *user_buf_arcb = (void __user *)uvio_attest->arcb_addr; > + > + if (copy_from_user(arcb, user_buf_arcb, uvio_attest->arcb_len)) > + return -EFAULT; > + > + uvcb_attest->header.len = sizeof(*uvcb_attest); > + uvcb_attest->header.cmd = UVC_CMD_RETR_ATTEST; > + uvcb_attest->arcb_addr = (u64)arcb; > + uvcb_attest->cont_token = 0; > + uvcb_attest->user_data_len = uvio_attest->user_data_len; > + memcpy(uvcb_attest->user_data, uvio_attest->user_data, sizeof(uvcb_attest->user_data)); > + uvcb_attest->meas_len = uvio_attest->meas_len; > + uvcb_attest->meas_addr = (u64)meas; > + uvcb_attest->add_data_len = uvio_attest->add_data_len; > + uvcb_attest->add_data_addr = (u64)add_data; > + > + return 0; > +} > + > +static int uvio_copy_attest_result_to_user(struct uv_cb_attest *uvcb_attest, > + struct uvio_ioctl_cb *uv_ioctl, > + u8 *measurement, u8 *add_data, > + struct uvio_attest *uvio_attest) > +{ > + struct uvio_attest __user *user_uvio_attest = (void __user *)uv_ioctl->argument_addr; > + void __user *user_buf_add = (void __user *)uvio_attest->add_data_addr; > + void __user *user_buf_meas = (void __user *)uvio_attest->meas_addr; > + void __user *user_buf_uid = &user_uvio_attest->config_uid; > + > + if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) > + return -EFAULT; > + if (add_data && copy_to_user(user_buf_add, add_data, uvio_attest->add_data_len)) > + return -EFAULT; > + if (copy_to_user(user_buf_uid, uvcb_attest->config_uid, sizeof(uvcb_attest->config_uid))) > + return -EFAULT; > + return 0; > +} > + > +static int get_uvio_attest(struct uvio_ioctl_cb *uv_ioctl, struct uvio_attest *uvio_attest) > +{ > + u8 __user *user_arg_buf = (u8 __user *)uv_ioctl->argument_addr; > + > + if (copy_from_user(uvio_attest, user_arg_buf, sizeof(*uvio_attest))) > + return -EFAULT; > + > + if (uvio_attest->arcb_len > UVIO_ATT_ARCB_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->arcb_len == 0) > + return -EINVAL; > + if (uvio_attest->meas_len > UVIO_ATT_MEASUREMENT_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->meas_len == 0) > + return -EINVAL; > + if (uvio_attest->add_data_len > UVIO_ATT_ADDITIONAL_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->reserved136) > + return -EINVAL; > + return 0; > +} > + > +/** > + * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC. > + * > + * @uv_ioctl: ioctl control block > + * > + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call. > + * It verifies that the given userspace addresses are valid and request sizes > + * are sane. Every other check is made by the Ultravisor (UV) and won't result > + * in a negative return value. It copies the input to kernelspace, builds the > + * request, sends the UV-call, and copies the result to userspace. > + * > + * The Attestation Request has two input and two outputs. > + * ARCB and User Data are inputs for the UV generated by userspace. > + * Measurement and Additional Data are outputs for userspace generated by UV. > + * > + * The Attestation Request Control Block (ARCB) is a cryptographically verified > + * and secured request to UV and User Data is some plaintext data which is > + * going to be included in the Attestation Measurement calculation. > + * > + * Measurement is a cryptographic measurement of the callers properties, > + * optional data configured by the ARCB and the user data. If specified by the > + * ARCB, UV will add some Additional Data to the measurement calculation. > + * This Additional Data is then returned as well. > + * > + * If the Retrieve Attestation Measurement UV facility is not present, > + * UV will return invalid command rc. This won't be fenced in the driver > + * and does not result in a negative return value. > + * > + * Context: might sleep > + * > + * Return: 0 on success or a negative error code on error. > + */ > +static int uvio_attestation(struct uvio_ioctl_cb *uv_ioctl) > +{ > + struct uv_cb_attest *uvcb_attest = NULL; > + struct uvio_attest *uvio_attest = NULL; > + u8 *measurement = NULL; > + u8 *add_data = NULL; > + u8 *arcb = NULL; > + int ret; > + > + ret = -EINVAL; > + if (uv_ioctl->argument_len != sizeof(*uvio_attest)) > + goto out; > + > + ret = -ENOMEM; > + uvio_attest = kzalloc(sizeof(*uvio_attest), GFP_KERNEL); > + if (!uvio_attest) > + goto out; > + > + ret = get_uvio_attest(uv_ioctl, uvio_attest); > + if (ret) > + goto out; > + > + ret = -ENOMEM; > + arcb = kvzalloc(uvio_attest->arcb_len, GFP_KERNEL); > + measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL); > + if (!arcb || !measurement) > + goto out; > + > + if (uvio_attest->add_data_len) { > + add_data = kvzalloc(uvio_attest->add_data_len, GFP_KERNEL); > + if (!add_data) > + goto out; > + } > + > + uvcb_attest = kzalloc(sizeof(*uvcb_attest), GFP_KERNEL); > + if (!uvcb_attest) > + goto out; > + > + ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest); > + if (ret) > + goto out; > + > + uv_call_sched(0, (u64)uvcb_attest); > + > + uv_ioctl->uv_rc = uvcb_attest->header.rc; > + uv_ioctl->uv_rrc = uvcb_attest->header.rrc; > + > + ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data, > + uvio_attest); > +out: > + kvfree(arcb); > + kvfree(measurement); > + kvfree(add_data); > + kfree(uvio_attest); > + kfree(uvcb_attest); > + return ret; > +} > + > +static int uvio_copy_and_check_ioctl(struct uvio_ioctl_cb *ioctl, void __user *argp) > +{ > + if (copy_from_user(ioctl, argp, sizeof(*ioctl))) > + return -EFAULT; > + if (ioctl->flags != 0) > + return -EINVAL; > + if (memchr_inv(ioctl->reserved14, 0, sizeof(ioctl->reserved14))) > + return -EINVAL; > + > + return 0; > +} > + > +/* > + * IOCTL entry point for the Ultravisor device. > + */ > +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) > +{ > + void __user *argp = (void __user *)arg; > + struct uvio_ioctl_cb *uv_ioctl; > + long ret; > + > + ret = -ENOMEM; > + uv_ioctl = vzalloc(sizeof(*uv_ioctl)); struct uvio_ioctl_cb is rather small, couldn't you just allocate it on the stack? > + if (!uv_ioctl) > + goto out; > + > + switch (cmd) { > + case UVIO_IOCTL_ATT: > + ret = uvio_copy_and_check_ioctl(uv_ioctl, argp); > + if (ret) > + goto out; > + ret = uvio_attestation(uv_ioctl); > + break; > + default: > + ret = -ENOIOCTLCMD; > + break; > + } > + if (ret) > + goto out; > + > + if (copy_to_user(argp, uv_ioctl, sizeof(*uv_ioctl))) > + ret = -EFAULT; > + > + out: > + vfree(uv_ioctl); > + return ret; > +} > + > +static const struct file_operations uvio_dev_fops = { > + .owner = THIS_MODULE, > + .unlocked_ioctl = uvio_ioctl, > + .llseek = no_llseek, > +}; > + > +static struct miscdevice uvio_dev_miscdev = { > + .minor = MISC_DYNAMIC_MINOR, > + .name = UVIO_DEVICE_NAME, > + .fops = &uvio_dev_fops, > +}; > + > +static void __exit uvio_dev_exit(void) > +{ > + misc_deregister(&uvio_dev_miscdev); > +} > + > +static int __init uvio_dev_init(void) > +{ > + if (!test_facility(158)) > + return -ENXIO; > + return misc_register(&uvio_dev_miscdev); > +} > + > +module_init(uvio_dev_init); > +module_exit(uvio_dev_exit); > + > +MODULE_AUTHOR("IBM Corporation"); > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("Ultravisor UAPI driver");
On 5/12/22 16:33, Claudio Imbrenda wrote: [snip] >> +/* >> + * IOCTL entry point for the Ultravisor device. >> + */ >> +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) >> +{ >> + void __user *argp = (void __user *)arg; >> + struct uvio_ioctl_cb *uv_ioctl; >> + long ret; >> + >> + ret = -ENOMEM; >> + uv_ioctl = vzalloc(sizeof(*uv_ioctl)); > struct uvio_ioctl_cb is rather small, couldn't you just allocate it on > the stack? > IIRC it was on stack in some previous version. We then had a discussion earlier about this triggered by the inverse comment and decided to not use the stack. [snip]
On Fri, 13 May 2022 09:45:39 +0200 Steffen Eiden <seiden@linux.ibm.com> wrote: > On 5/12/22 16:33, Claudio Imbrenda wrote: > > [snip] > > >> +/* > >> + * IOCTL entry point for the Ultravisor device. > >> + */ > >> +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) > >> +{ > >> + void __user *argp = (void __user *)arg; > >> + struct uvio_ioctl_cb *uv_ioctl; > >> + long ret; > >> + > >> + ret = -ENOMEM; > >> + uv_ioctl = vzalloc(sizeof(*uv_ioctl)); > > struct uvio_ioctl_cb is rather small, couldn't you just allocate it on > > the stack? > > > IIRC it was on stack in some previous version. We then had a discussion > earlier about this triggered by the inverse comment and decided to not > use the stack. ok fair enough but what's the reason for a vzalloc instead of a kzalloc, when the allocation is surely going to be small? > > [snip] >
On 5/13/22 10:37, Claudio Imbrenda wrote: > On Fri, 13 May 2022 09:45:39 +0200 > Steffen Eiden <seiden@linux.ibm.com> wrote: > >> On 5/12/22 16:33, Claudio Imbrenda wrote: >> >> [snip] >> >>>> +/* >>>> + * IOCTL entry point for the Ultravisor device. >>>> + */ >>>> +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) >>>> +{ >>>> + void __user *argp = (void __user *)arg; >>>> + struct uvio_ioctl_cb *uv_ioctl; >>>> + long ret; >>>> + >>>> + ret = -ENOMEM; >>>> + uv_ioctl = vzalloc(sizeof(*uv_ioctl)); >>> struct uvio_ioctl_cb is rather small, couldn't you just allocate it on >>> the stack? >>> >> IIRC it was on stack in some previous version. We then had a discussion >> earlier about this triggered by the inverse comment and decided to not >> use the stack. > > ok fair enough > > but what's the reason for a vzalloc instead of a kzalloc, when the > allocation is surely going to be small? > We had no strong reasons against or for vzalloc/kzalloc. If you want me to change it to kzalloc I can do it. I still have no strong opinion on that. >> [snip]
This patch adds a new miscdevice to expose some Ultravisor functions to userspace. Userspace can send IOCTLs to the uvdevice that will then emit a corresponding Ultravisor Call and hands the result over to userspace. The uvdevice is available if the Ultravisor Call facility is present. Userspace can call the Retrieve Attestation Measurement Ultravisor Call using IOCTLs on the uvdevice. The uvdevice will do some sanity checks first. Then, copy the request data to kernel space, build the UVCB, perform the UV call, and copy the result back to userspace. Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> --- After some private discussion "struct uvio_ioctl_cb uv_ioctl" in "uvio_ioctl()" is now in the stack. MAINTAINERS | 2 + arch/s390/include/asm/uv.h | 23 ++- arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ drivers/s390/char/Kconfig | 10 + drivers/s390/char/Makefile | 1 + drivers/s390/char/uvdevice.c | 257 ++++++++++++++++++++++++++ 6 files changed, 343 insertions(+), 1 deletion(-) create mode 100644 arch/s390/include/uapi/asm/uvdevice.h create mode 100644 drivers/s390/char/uvdevice.c diff --git a/MAINTAINERS b/MAINTAINERS index e8c52d0192a6..b42ab4a35e18 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10781,9 +10781,11 @@ F: Documentation/virt/kvm/s390* F: arch/s390/include/asm/gmap.h F: arch/s390/include/asm/kvm* F: arch/s390/include/uapi/asm/kvm* +F: arch/s390/include/uapi/asm/uvdevice.h F: arch/s390/kernel/uv.c F: arch/s390/kvm/ F: arch/s390/mm/gmap.c +F: drivers/s390/char/uvdevice.c F: tools/testing/selftests/kvm/*/s390x/ F: tools/testing/selftests/kvm/s390x/ diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h index a2d376b8bce3..cfea7b77a5b8 100644 --- a/arch/s390/include/asm/uv.h +++ b/arch/s390/include/asm/uv.h @@ -2,7 +2,7 @@ /* * Ultravisor Interfaces * - * Copyright IBM Corp. 2019 + * Copyright IBM Corp. 2019, 2022 * * Author(s): * Vasily Gorbik <gor@linux.ibm.com> @@ -52,6 +52,7 @@ #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342 #define UVC_CMD_SET_SHARED_ACCESS 0x1000 #define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001 +#define UVC_CMD_RETR_ATTEST 0x1020 /* Bits in installed uv calls */ enum uv_cmds_inst { @@ -76,6 +77,7 @@ enum uv_cmds_inst { BIT_UVC_CMD_UNSHARE_ALL = 20, BIT_UVC_CMD_PIN_PAGE_SHARED = 21, BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22, + BIT_UVC_CMD_RETR_ATTEST = 28, }; enum uv_feat_ind { @@ -219,6 +221,25 @@ struct uv_cb_share { u64 reserved28; } __packed __aligned(8); +/* Retrieve Attestation Measurement */ +struct uv_cb_attest { + struct uv_cb_header header; /* 0x0000 */ + u64 reserved08[2]; /* 0x0008 */ + u64 arcb_addr; /* 0x0018 */ + u64 cont_token; /* 0x0020 */ + u8 reserved28[6]; /* 0x0028 */ + u16 user_data_len; /* 0x002e */ + u8 user_data[256]; /* 0x0030 */ + u32 reserved130[3]; /* 0x0130 */ + u32 meas_len; /* 0x013c */ + u64 meas_addr; /* 0x0140 */ + u8 config_uid[16]; /* 0x0148 */ + u32 reserved158; /* 0x0158 */ + u32 add_data_len; /* 0x015c */ + u64 add_data_addr; /* 0x0160 */ + u64 reserved168[4]; /* 0x0168 */ +} __packed __aligned(8); + static inline int __uv_call(unsigned long r1, unsigned long r2) { int cc; diff --git a/arch/s390/include/uapi/asm/uvdevice.h b/arch/s390/include/uapi/asm/uvdevice.h new file mode 100644 index 000000000000..d0bdde4969a1 --- /dev/null +++ b/arch/s390/include/uapi/asm/uvdevice.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright IBM Corp. 2022 + * Author(s): Steffen Eiden <seiden@linux.ibm.com> + */ +#ifndef __S390_ASM_UVDEVICE_H +#define __S390_ASM_UVDEVICE_H + +#include <linux/types.h> + +struct uvio_ioctl_cb { + __u32 flags; + __u16 uv_rc; /* UV header rc value */ + __u16 uv_rrc; /* UV header rrc value */ + __u64 argument_addr; /* Userspace address of uvio argument */ + __u32 argument_len; + __u8 reserved14[0x40 - 0x14]; /* must be zero */ +}; + +#define UVIO_ATT_USER_DATA_LEN 0x100 +#define UVIO_ATT_UID_LEN 0x10 +struct uvio_attest { + __u64 arcb_addr; /* 0x0000 */ + __u64 meas_addr; /* 0x0008 */ + __u64 add_data_addr; /* 0x0010 */ + __u8 user_data[UVIO_ATT_USER_DATA_LEN]; /* 0x0018 */ + __u8 config_uid[UVIO_ATT_UID_LEN]; /* 0x0118 */ + __u32 arcb_len; /* 0x0128 */ + __u32 meas_len; /* 0x012c */ + __u32 add_data_len; /* 0x0130 */ + __u16 user_data_len; /* 0x0134 */ + __u16 reserved136; /* 0x0136 */ +}; + +/* + * The following max values define an upper length for the IOCTL in/out buffers. + * However, they do not represent the maximum the Ultravisor allows which is + * often way smaller. By allowing larger buffer sizes we hopefully do not need + * to update the code with every machine update. It is therefore possible for + * userspace to request more memory than actually used by kernel/UV. + */ +#define UVIO_ATT_ARCB_MAX_LEN 0x100000 +#define UVIO_ATT_MEASUREMENT_MAX_LEN 0x8000 +#define UVIO_ATT_ADDITIONAL_MAX_LEN 0x8000 + +#define UVIO_DEVICE_NAME "uv" +#define UVIO_TYPE_UVC 'u' + +#define UVIO_IOCTL_ATT _IOWR(UVIO_TYPE_UVC, 0x01, struct uvio_ioctl_cb) + +#endif /* __S390_ASM_UVDEVICE_H */ diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 6cc4b19acf85..e9b9902abbaf 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -100,6 +100,16 @@ config SCLP_OFB This option enables the Open-for-Business interface to the s390 Service Element. +config S390_UV_UAPI + def_tristate y + prompt "Ultravisor userspace API" + help + Selecting exposes parts of the UV interface to userspace + by providing a misc character device at /dev/uv. + Using IOCTLs one can interact with the UV. + The device is only available if the Ultravisor + Facility (158) is present. + config S390_TAPE def_tristate m prompt "S/390 tape device support" diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index c6fdb81a068a..ce32270082f5 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_MONREADER) += monreader.o obj-$(CONFIG_MONWRITER) += monwriter.o obj-$(CONFIG_S390_VMUR) += vmur.o obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o +obj-$(CONFIG_S390_UV_UAPI) += uvdevice.o hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o obj-$(CONFIG_HMC_DRV) += hmcdrv.o diff --git a/drivers/s390/char/uvdevice.c b/drivers/s390/char/uvdevice.c new file mode 100644 index 000000000000..e8e1409df015 --- /dev/null +++ b/drivers/s390/char/uvdevice.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright IBM Corp. 2022 + * Author(s): Steffen Eiden <seiden@linux.ibm.com> + * + * This file provides a Linux misc device to give userspace access to some + * Ultravisor (UV) functions. The device only accepts IOCTLs and will only + * be present if the Ultravisor facility (158) is present. + * + * When userspace sends a valid IOCTL uvdevice will copy the input data to + * kernel space, do some basic validity checks to avoid kernel/system + * corruption. Any other check that the Ultravisor does will not be done by + * the uvdevice to keep changes minimal when adding new functionalities + * to existing UV-calls. + * After the checks uvdevice builds a corresponding + * Ultravisor Call Control Block, and sends the request to the Ultravisor. + * Then, it copies the response, including the return codes, back to userspace. + * It is the responsibility of the userspace to check for any error issued + * by UV and to interpret the UV response. The uvdevice acts as a communication + * channel for userspace to the Ultravisor. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include <asm/uvdevice.h> +#include <asm/uv.h> + +static int uvio_build_uvcb_attest(struct uv_cb_attest *uvcb_attest, u8 *arcb, + u8 *meas, u8 *add_data, struct uvio_attest *uvio_attest) +{ + void __user *user_buf_arcb = (void __user *)uvio_attest->arcb_addr; + + if (copy_from_user(arcb, user_buf_arcb, uvio_attest->arcb_len)) + return -EFAULT; + + uvcb_attest->header.len = sizeof(*uvcb_attest); + uvcb_attest->header.cmd = UVC_CMD_RETR_ATTEST; + uvcb_attest->arcb_addr = (u64)arcb; + uvcb_attest->cont_token = 0; + uvcb_attest->user_data_len = uvio_attest->user_data_len; + memcpy(uvcb_attest->user_data, uvio_attest->user_data, sizeof(uvcb_attest->user_data)); + uvcb_attest->meas_len = uvio_attest->meas_len; + uvcb_attest->meas_addr = (u64)meas; + uvcb_attest->add_data_len = uvio_attest->add_data_len; + uvcb_attest->add_data_addr = (u64)add_data; + + return 0; +} + +static int uvio_copy_attest_result_to_user(struct uv_cb_attest *uvcb_attest, + struct uvio_ioctl_cb *uv_ioctl, + u8 *measurement, u8 *add_data, + struct uvio_attest *uvio_attest) +{ + struct uvio_attest __user *user_uvio_attest = (void __user *)uv_ioctl->argument_addr; + void __user *user_buf_add = (void __user *)uvio_attest->add_data_addr; + void __user *user_buf_meas = (void __user *)uvio_attest->meas_addr; + void __user *user_buf_uid = &user_uvio_attest->config_uid; + + if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) + return -EFAULT; + if (add_data && copy_to_user(user_buf_add, add_data, uvio_attest->add_data_len)) + return -EFAULT; + if (copy_to_user(user_buf_uid, uvcb_attest->config_uid, sizeof(uvcb_attest->config_uid))) + return -EFAULT; + return 0; +} + +static int get_uvio_attest(struct uvio_ioctl_cb *uv_ioctl, struct uvio_attest *uvio_attest) +{ + u8 __user *user_arg_buf = (u8 __user *)uv_ioctl->argument_addr; + + if (copy_from_user(uvio_attest, user_arg_buf, sizeof(*uvio_attest))) + return -EFAULT; + + if (uvio_attest->arcb_len > UVIO_ATT_ARCB_MAX_LEN) + return -EINVAL; + if (uvio_attest->arcb_len == 0) + return -EINVAL; + if (uvio_attest->meas_len > UVIO_ATT_MEASUREMENT_MAX_LEN) + return -EINVAL; + if (uvio_attest->meas_len == 0) + return -EINVAL; + if (uvio_attest->add_data_len > UVIO_ATT_ADDITIONAL_MAX_LEN) + return -EINVAL; + if (uvio_attest->reserved136) + return -EINVAL; + return 0; +} + +/** + * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC. + * + * @uv_ioctl: ioctl control block + * + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call. + * It verifies that the given userspace addresses are valid and request sizes + * are sane. Every other check is made by the Ultravisor (UV) and won't result + * in a negative return value. It copies the input to kernelspace, builds the + * request, sends the UV-call, and copies the result to userspace. + * + * The Attestation Request has two input and two outputs. + * ARCB and User Data are inputs for the UV generated by userspace. + * Measurement and Additional Data are outputs for userspace generated by UV. + * + * The Attestation Request Control Block (ARCB) is a cryptographically verified + * and secured request to UV and User Data is some plaintext data which is + * going to be included in the Attestation Measurement calculation. + * + * Measurement is a cryptographic measurement of the callers properties, + * optional data configured by the ARCB and the user data. If specified by the + * ARCB, UV will add some Additional Data to the measurement calculation. + * This Additional Data is then returned as well. + * + * If the Retrieve Attestation Measurement UV facility is not present, + * UV will return invalid command rc. This won't be fenced in the driver + * and does not result in a negative return value. + * + * Context: might sleep + * + * Return: 0 on success or a negative error code on error. + */ +static int uvio_attestation(struct uvio_ioctl_cb *uv_ioctl) +{ + struct uv_cb_attest *uvcb_attest = NULL; + struct uvio_attest *uvio_attest = NULL; + u8 *measurement = NULL; + u8 *add_data = NULL; + u8 *arcb = NULL; + int ret; + + ret = -EINVAL; + if (uv_ioctl->argument_len != sizeof(*uvio_attest)) + goto out; + + ret = -ENOMEM; + uvio_attest = kzalloc(sizeof(*uvio_attest), GFP_KERNEL); + if (!uvio_attest) + goto out; + + ret = get_uvio_attest(uv_ioctl, uvio_attest); + if (ret) + goto out; + + ret = -ENOMEM; + arcb = kvzalloc(uvio_attest->arcb_len, GFP_KERNEL); + measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL); + if (!arcb || !measurement) + goto out; + + if (uvio_attest->add_data_len) { + add_data = kvzalloc(uvio_attest->add_data_len, GFP_KERNEL); + if (!add_data) + goto out; + } + + uvcb_attest = kzalloc(sizeof(*uvcb_attest), GFP_KERNEL); + if (!uvcb_attest) + goto out; + + ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest); + if (ret) + goto out; + + uv_call_sched(0, (u64)uvcb_attest); + + uv_ioctl->uv_rc = uvcb_attest->header.rc; + uv_ioctl->uv_rrc = uvcb_attest->header.rrc; + + ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data, + uvio_attest); +out: + kvfree(arcb); + kvfree(measurement); + kvfree(add_data); + kfree(uvio_attest); + kfree(uvcb_attest); + return ret; +} + +static int uvio_copy_and_check_ioctl(struct uvio_ioctl_cb *ioctl, void __user *argp) +{ + if (copy_from_user(ioctl, argp, sizeof(*ioctl))) + return -EFAULT; + if (ioctl->flags != 0) + return -EINVAL; + if (memchr_inv(ioctl->reserved14, 0, sizeof(ioctl->reserved14))) + return -EINVAL; + + return 0; +} + +/* + * IOCTL entry point for the Ultravisor device. + */ +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + struct uvio_ioctl_cb uv_ioctl = { }; + long ret; + + switch (cmd) { + case UVIO_IOCTL_ATT: + ret = uvio_copy_and_check_ioctl(&uv_ioctl, argp); + if (ret) + return ret; + ret = uvio_attestation(&uv_ioctl); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + if (ret) + return ret; + + if (copy_to_user(argp, &uv_ioctl, sizeof(uv_ioctl))) + ret = -EFAULT; + + return ret; +} + +static const struct file_operations uvio_dev_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = uvio_ioctl, + .llseek = no_llseek, +}; + +static struct miscdevice uvio_dev_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = UVIO_DEVICE_NAME, + .fops = &uvio_dev_fops, +}; + +static void __exit uvio_dev_exit(void) +{ + misc_deregister(&uvio_dev_miscdev); +} + +static int __init uvio_dev_init(void) +{ + if (!test_facility(158)) + return -ENXIO; + return misc_register(&uvio_dev_miscdev); +} + +module_init(uvio_dev_init); +module_exit(uvio_dev_exit); + +MODULE_AUTHOR("IBM Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Ultravisor UAPI driver");
On Mon, 16 May 2022 11:33:35 +0000 Steffen Eiden <seiden@linux.ibm.com> wrote: > This patch adds a new miscdevice to expose some Ultravisor functions > to userspace. Userspace can send IOCTLs to the uvdevice that will then > emit a corresponding Ultravisor Call and hands the result over to > userspace. The uvdevice is available if the Ultravisor Call facility is > present. > Userspace can call the Retrieve Attestation Measurement > Ultravisor Call using IOCTLs on the uvdevice. > > The uvdevice will do some sanity checks first. > Then, copy the request data to kernel space, build the UVCB, > perform the UV call, and copy the result back to userspace. > > Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> > Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> > --- > After some private discussion "struct uvio_ioctl_cb uv_ioctl" > in "uvio_ioctl()" is now in the stack. > > MAINTAINERS | 2 + > arch/s390/include/asm/uv.h | 23 ++- > arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ > drivers/s390/char/Kconfig | 10 + > drivers/s390/char/Makefile | 1 + > drivers/s390/char/uvdevice.c | 257 ++++++++++++++++++++++++++ > 6 files changed, 343 insertions(+), 1 deletion(-) > create mode 100644 arch/s390/include/uapi/asm/uvdevice.h > create mode 100644 drivers/s390/char/uvdevice.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e8c52d0192a6..b42ab4a35e18 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -10781,9 +10781,11 @@ F: Documentation/virt/kvm/s390* > F: arch/s390/include/asm/gmap.h > F: arch/s390/include/asm/kvm* > F: arch/s390/include/uapi/asm/kvm* > +F: arch/s390/include/uapi/asm/uvdevice.h > F: arch/s390/kernel/uv.c > F: arch/s390/kvm/ > F: arch/s390/mm/gmap.c > +F: drivers/s390/char/uvdevice.c > F: tools/testing/selftests/kvm/*/s390x/ > F: tools/testing/selftests/kvm/s390x/ > > diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h > index a2d376b8bce3..cfea7b77a5b8 100644 > --- a/arch/s390/include/asm/uv.h > +++ b/arch/s390/include/asm/uv.h > @@ -2,7 +2,7 @@ > /* > * Ultravisor Interfaces > * > - * Copyright IBM Corp. 2019 > + * Copyright IBM Corp. 2019, 2022 > * > * Author(s): > * Vasily Gorbik <gor@linux.ibm.com> > @@ -52,6 +52,7 @@ > #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342 > #define UVC_CMD_SET_SHARED_ACCESS 0x1000 > #define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001 > +#define UVC_CMD_RETR_ATTEST 0x1020 > > /* Bits in installed uv calls */ > enum uv_cmds_inst { > @@ -76,6 +77,7 @@ enum uv_cmds_inst { > BIT_UVC_CMD_UNSHARE_ALL = 20, > BIT_UVC_CMD_PIN_PAGE_SHARED = 21, > BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22, > + BIT_UVC_CMD_RETR_ATTEST = 28, > }; > > enum uv_feat_ind { > @@ -219,6 +221,25 @@ struct uv_cb_share { > u64 reserved28; > } __packed __aligned(8); > > +/* Retrieve Attestation Measurement */ > +struct uv_cb_attest { > + struct uv_cb_header header; /* 0x0000 */ > + u64 reserved08[2]; /* 0x0008 */ > + u64 arcb_addr; /* 0x0018 */ > + u64 cont_token; /* 0x0020 */ > + u8 reserved28[6]; /* 0x0028 */ > + u16 user_data_len; /* 0x002e */ > + u8 user_data[256]; /* 0x0030 */ > + u32 reserved130[3]; /* 0x0130 */ > + u32 meas_len; /* 0x013c */ > + u64 meas_addr; /* 0x0140 */ > + u8 config_uid[16]; /* 0x0148 */ > + u32 reserved158; /* 0x0158 */ > + u32 add_data_len; /* 0x015c */ > + u64 add_data_addr; /* 0x0160 */ > + u64 reserved168[4]; /* 0x0168 */ > +} __packed __aligned(8); > + > static inline int __uv_call(unsigned long r1, unsigned long r2) > { > int cc; > diff --git a/arch/s390/include/uapi/asm/uvdevice.h b/arch/s390/include/uapi/asm/uvdevice.h > new file mode 100644 > index 000000000000..d0bdde4969a1 > --- /dev/null > +++ b/arch/s390/include/uapi/asm/uvdevice.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ > +/* > + * Copyright IBM Corp. 2022 > + * Author(s): Steffen Eiden <seiden@linux.ibm.com> > + */ > +#ifndef __S390_ASM_UVDEVICE_H > +#define __S390_ASM_UVDEVICE_H > + > +#include <linux/types.h> > + > +struct uvio_ioctl_cb { > + __u32 flags; > + __u16 uv_rc; /* UV header rc value */ > + __u16 uv_rrc; /* UV header rrc value */ > + __u64 argument_addr; /* Userspace address of uvio argument */ > + __u32 argument_len; > + __u8 reserved14[0x40 - 0x14]; /* must be zero */ > +}; > + > +#define UVIO_ATT_USER_DATA_LEN 0x100 > +#define UVIO_ATT_UID_LEN 0x10 > +struct uvio_attest { > + __u64 arcb_addr; /* 0x0000 */ > + __u64 meas_addr; /* 0x0008 */ > + __u64 add_data_addr; /* 0x0010 */ > + __u8 user_data[UVIO_ATT_USER_DATA_LEN]; /* 0x0018 */ > + __u8 config_uid[UVIO_ATT_UID_LEN]; /* 0x0118 */ > + __u32 arcb_len; /* 0x0128 */ > + __u32 meas_len; /* 0x012c */ > + __u32 add_data_len; /* 0x0130 */ > + __u16 user_data_len; /* 0x0134 */ > + __u16 reserved136; /* 0x0136 */ > +}; > + > +/* > + * The following max values define an upper length for the IOCTL in/out buffers. > + * However, they do not represent the maximum the Ultravisor allows which is > + * often way smaller. By allowing larger buffer sizes we hopefully do not need > + * to update the code with every machine update. It is therefore possible for > + * userspace to request more memory than actually used by kernel/UV. > + */ > +#define UVIO_ATT_ARCB_MAX_LEN 0x100000 > +#define UVIO_ATT_MEASUREMENT_MAX_LEN 0x8000 > +#define UVIO_ATT_ADDITIONAL_MAX_LEN 0x8000 > + > +#define UVIO_DEVICE_NAME "uv" > +#define UVIO_TYPE_UVC 'u' > + > +#define UVIO_IOCTL_ATT _IOWR(UVIO_TYPE_UVC, 0x01, struct uvio_ioctl_cb) > + > +#endif /* __S390_ASM_UVDEVICE_H */ > diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig > index 6cc4b19acf85..e9b9902abbaf 100644 > --- a/drivers/s390/char/Kconfig > +++ b/drivers/s390/char/Kconfig > @@ -100,6 +100,16 @@ config SCLP_OFB > This option enables the Open-for-Business interface to the s390 > Service Element. > > +config S390_UV_UAPI > + def_tristate y > + prompt "Ultravisor userspace API" > + help > + Selecting exposes parts of the UV interface to userspace > + by providing a misc character device at /dev/uv. > + Using IOCTLs one can interact with the UV. > + The device is only available if the Ultravisor > + Facility (158) is present. > + > config S390_TAPE > def_tristate m > prompt "S/390 tape device support" > diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile > index c6fdb81a068a..ce32270082f5 100644 > --- a/drivers/s390/char/Makefile > +++ b/drivers/s390/char/Makefile > @@ -48,6 +48,7 @@ obj-$(CONFIG_MONREADER) += monreader.o > obj-$(CONFIG_MONWRITER) += monwriter.o > obj-$(CONFIG_S390_VMUR) += vmur.o > obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o > +obj-$(CONFIG_S390_UV_UAPI) += uvdevice.o > > hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o > obj-$(CONFIG_HMC_DRV) += hmcdrv.o > diff --git a/drivers/s390/char/uvdevice.c b/drivers/s390/char/uvdevice.c > new file mode 100644 > index 000000000000..e8e1409df015 > --- /dev/null > +++ b/drivers/s390/char/uvdevice.c > @@ -0,0 +1,257 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright IBM Corp. 2022 > + * Author(s): Steffen Eiden <seiden@linux.ibm.com> > + * > + * This file provides a Linux misc device to give userspace access to some > + * Ultravisor (UV) functions. The device only accepts IOCTLs and will only > + * be present if the Ultravisor facility (158) is present. > + * > + * When userspace sends a valid IOCTL uvdevice will copy the input data to > + * kernel space, do some basic validity checks to avoid kernel/system > + * corruption. Any other check that the Ultravisor does will not be done by > + * the uvdevice to keep changes minimal when adding new functionalities > + * to existing UV-calls. > + * After the checks uvdevice builds a corresponding > + * Ultravisor Call Control Block, and sends the request to the Ultravisor. > + * Then, it copies the response, including the return codes, back to userspace. > + * It is the responsibility of the userspace to check for any error issued > + * by UV and to interpret the UV response. The uvdevice acts as a communication > + * channel for userspace to the Ultravisor. > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/miscdevice.h> > +#include <linux/types.h> > +#include <linux/stddef.h> > +#include <linux/vmalloc.h> > +#include <linux/slab.h> > + > +#include <asm/uvdevice.h> > +#include <asm/uv.h> > + > +static int uvio_build_uvcb_attest(struct uv_cb_attest *uvcb_attest, u8 *arcb, > + u8 *meas, u8 *add_data, struct uvio_attest *uvio_attest) > +{ > + void __user *user_buf_arcb = (void __user *)uvio_attest->arcb_addr; > + > + if (copy_from_user(arcb, user_buf_arcb, uvio_attest->arcb_len)) > + return -EFAULT; > + > + uvcb_attest->header.len = sizeof(*uvcb_attest); > + uvcb_attest->header.cmd = UVC_CMD_RETR_ATTEST; > + uvcb_attest->arcb_addr = (u64)arcb; > + uvcb_attest->cont_token = 0; > + uvcb_attest->user_data_len = uvio_attest->user_data_len; > + memcpy(uvcb_attest->user_data, uvio_attest->user_data, sizeof(uvcb_attest->user_data)); > + uvcb_attest->meas_len = uvio_attest->meas_len; > + uvcb_attest->meas_addr = (u64)meas; > + uvcb_attest->add_data_len = uvio_attest->add_data_len; > + uvcb_attest->add_data_addr = (u64)add_data; > + > + return 0; > +} > + > +static int uvio_copy_attest_result_to_user(struct uv_cb_attest *uvcb_attest, > + struct uvio_ioctl_cb *uv_ioctl, > + u8 *measurement, u8 *add_data, > + struct uvio_attest *uvio_attest) > +{ > + struct uvio_attest __user *user_uvio_attest = (void __user *)uv_ioctl->argument_addr; > + void __user *user_buf_add = (void __user *)uvio_attest->add_data_addr; > + void __user *user_buf_meas = (void __user *)uvio_attest->meas_addr; > + void __user *user_buf_uid = &user_uvio_attest->config_uid; > + > + if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) > + return -EFAULT; > + if (add_data && copy_to_user(user_buf_add, add_data, uvio_attest->add_data_len)) > + return -EFAULT; > + if (copy_to_user(user_buf_uid, uvcb_attest->config_uid, sizeof(uvcb_attest->config_uid))) > + return -EFAULT; > + return 0; > +} > + > +static int get_uvio_attest(struct uvio_ioctl_cb *uv_ioctl, struct uvio_attest *uvio_attest) > +{ > + u8 __user *user_arg_buf = (u8 __user *)uv_ioctl->argument_addr; > + > + if (copy_from_user(uvio_attest, user_arg_buf, sizeof(*uvio_attest))) > + return -EFAULT; > + > + if (uvio_attest->arcb_len > UVIO_ATT_ARCB_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->arcb_len == 0) > + return -EINVAL; > + if (uvio_attest->meas_len > UVIO_ATT_MEASUREMENT_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->meas_len == 0) > + return -EINVAL; > + if (uvio_attest->add_data_len > UVIO_ATT_ADDITIONAL_MAX_LEN) > + return -EINVAL; > + if (uvio_attest->reserved136) > + return -EINVAL; > + return 0; > +} > + > +/** > + * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC. > + * > + * @uv_ioctl: ioctl control block > + * > + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call. > + * It verifies that the given userspace addresses are valid and request sizes > + * are sane. Every other check is made by the Ultravisor (UV) and won't result > + * in a negative return value. It copies the input to kernelspace, builds the > + * request, sends the UV-call, and copies the result to userspace. > + * > + * The Attestation Request has two input and two outputs. > + * ARCB and User Data are inputs for the UV generated by userspace. > + * Measurement and Additional Data are outputs for userspace generated by UV. > + * > + * The Attestation Request Control Block (ARCB) is a cryptographically verified > + * and secured request to UV and User Data is some plaintext data which is > + * going to be included in the Attestation Measurement calculation. > + * > + * Measurement is a cryptographic measurement of the callers properties, > + * optional data configured by the ARCB and the user data. If specified by the > + * ARCB, UV will add some Additional Data to the measurement calculation. > + * This Additional Data is then returned as well. > + * > + * If the Retrieve Attestation Measurement UV facility is not present, > + * UV will return invalid command rc. This won't be fenced in the driver > + * and does not result in a negative return value. > + * > + * Context: might sleep > + * > + * Return: 0 on success or a negative error code on error. > + */ > +static int uvio_attestation(struct uvio_ioctl_cb *uv_ioctl) > +{ > + struct uv_cb_attest *uvcb_attest = NULL; > + struct uvio_attest *uvio_attest = NULL; > + u8 *measurement = NULL; > + u8 *add_data = NULL; > + u8 *arcb = NULL; > + int ret; > + > + ret = -EINVAL; > + if (uv_ioctl->argument_len != sizeof(*uvio_attest)) > + goto out; > + > + ret = -ENOMEM; > + uvio_attest = kzalloc(sizeof(*uvio_attest), GFP_KERNEL); > + if (!uvio_attest) > + goto out; > + > + ret = get_uvio_attest(uv_ioctl, uvio_attest); > + if (ret) > + goto out; > + > + ret = -ENOMEM; > + arcb = kvzalloc(uvio_attest->arcb_len, GFP_KERNEL); > + measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL); > + if (!arcb || !measurement) > + goto out; > + > + if (uvio_attest->add_data_len) { > + add_data = kvzalloc(uvio_attest->add_data_len, GFP_KERNEL); > + if (!add_data) > + goto out; > + } > + > + uvcb_attest = kzalloc(sizeof(*uvcb_attest), GFP_KERNEL); > + if (!uvcb_attest) > + goto out; > + > + ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest); > + if (ret) > + goto out; > + > + uv_call_sched(0, (u64)uvcb_attest); > + > + uv_ioctl->uv_rc = uvcb_attest->header.rc; > + uv_ioctl->uv_rrc = uvcb_attest->header.rrc; > + > + ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data, > + uvio_attest); > +out: > + kvfree(arcb); > + kvfree(measurement); > + kvfree(add_data); > + kfree(uvio_attest); > + kfree(uvcb_attest); > + return ret; > +} > + > +static int uvio_copy_and_check_ioctl(struct uvio_ioctl_cb *ioctl, void __user *argp) > +{ > + if (copy_from_user(ioctl, argp, sizeof(*ioctl))) > + return -EFAULT; > + if (ioctl->flags != 0) > + return -EINVAL; > + if (memchr_inv(ioctl->reserved14, 0, sizeof(ioctl->reserved14))) > + return -EINVAL; > + > + return 0; > +} > + > +/* > + * IOCTL entry point for the Ultravisor device. > + */ > +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) > +{ > + void __user *argp = (void __user *)arg; > + struct uvio_ioctl_cb uv_ioctl = { }; > + long ret; > + > + switch (cmd) { > + case UVIO_IOCTL_ATT: > + ret = uvio_copy_and_check_ioctl(&uv_ioctl, argp); > + if (ret) > + return ret; > + ret = uvio_attestation(&uv_ioctl); > + break; > + default: > + ret = -ENOIOCTLCMD; > + break; > + } > + if (ret) > + return ret; > + > + if (copy_to_user(argp, &uv_ioctl, sizeof(uv_ioctl))) > + ret = -EFAULT; > + > + return ret; > +} > + > +static const struct file_operations uvio_dev_fops = { > + .owner = THIS_MODULE, > + .unlocked_ioctl = uvio_ioctl, > + .llseek = no_llseek, > +}; > + > +static struct miscdevice uvio_dev_miscdev = { > + .minor = MISC_DYNAMIC_MINOR, > + .name = UVIO_DEVICE_NAME, > + .fops = &uvio_dev_fops, > +}; > + > +static void __exit uvio_dev_exit(void) > +{ > + misc_deregister(&uvio_dev_miscdev); > +} > + > +static int __init uvio_dev_init(void) > +{ > + if (!test_facility(158)) > + return -ENXIO; > + return misc_register(&uvio_dev_miscdev); > +} > + > +module_init(uvio_dev_init); > +module_exit(uvio_dev_exit); > + > +MODULE_AUTHOR("IBM Corporation"); > +MODULE_LICENSE("GPL"); > +MODULE_DESCRIPTION("Ultravisor UAPI driver");
On 5/10/22 16:47, Steffen Eiden wrote: > This patch adds a new miscdevice to expose some Ultravisor functions > to userspace. Userspace can send IOCTLs to the uvdevice that will then > emit a corresponding Ultravisor Call and hands the result over to > userspace. The uvdevice is available if the Ultravisor Call facility is > present. > Userspace can call the Retrieve Attestation Measurement > Ultravisor Call using IOCTLs on the uvdevice. > > The uvdevice will do some sanity checks first. > Then, copy the request data to kernel space, build the UVCB, > perform the UV call, and copy the result back to userspace. > > Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> > Reviewed-by: Janosch Frank <frankja@linux.ibm.com> I'd like to pick this if I'm allowed to fix the two white space problems below. > --- > MAINTAINERS | 2 + > arch/s390/include/asm/uv.h | 23 ++- > arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ > drivers/s390/char/Kconfig | 10 + > drivers/s390/char/Makefile | 1 + > drivers/s390/char/uvdevice.c | 264 ++++++++++++++++++++++++++ > 6 files changed, 350 insertions(+), 1 deletion(-) > create mode 100644 arch/s390/include/uapi/asm/uvdevice.h > create mode 100644 drivers/s390/char/uvdevice.c > > +#endif /* __S390_ASM_UVDEVICE_H */ There are two spaces between the "endif" and the "/" > diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig > index 6cc4b19acf85..e9b9902abbaf 100644 > --- a/drivers/s390/char/Kconfig > +++ b/drivers/s390/char/Kconfig > @@ -100,6 +100,16 @@ config SCLP_OFB > This option enables the Open-for-Business interface to the s390 > Service Element. > [...] > + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call. Double space > + * It verifies that the given userspace addresses are valid and request sizes > + * are sane. Every other check is made by the Ultravisor (UV) and won't result > + * in a negative return value. It copies the input to kernelspace, builds the > + * request, sends the UV-call, and copies the result to userspace. > + *
On 5/17/22 10:38, Janosch Frank wrote: > On 5/10/22 16:47, Steffen Eiden wrote: >> This patch adds a new miscdevice to expose some Ultravisor functions >> to userspace. Userspace can send IOCTLs to the uvdevice that will then >> emit a corresponding Ultravisor Call and hands the result over to >> userspace. The uvdevice is available if the Ultravisor Call facility is >> present. >> Userspace can call the Retrieve Attestation Measurement >> Ultravisor Call using IOCTLs on the uvdevice. >> >> The uvdevice will do some sanity checks first. >> Then, copy the request data to kernel space, build the UVCB, >> perform the UV call, and copy the result back to userspace. >> >> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> >> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> > > I'd like to pick this if I'm allowed to fix the two white space problems > below. I am fine with that. Thank you. > >> --- >> MAINTAINERS | 2 + >> arch/s390/include/asm/uv.h | 23 ++- >> arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ >> drivers/s390/char/Kconfig | 10 + >> drivers/s390/char/Makefile | 1 + >> drivers/s390/char/uvdevice.c | 264 ++++++++++++++++++++++++++ >> 6 files changed, 350 insertions(+), 1 deletion(-) >> create mode 100644 arch/s390/include/uapi/asm/uvdevice.h >> create mode 100644 drivers/s390/char/uvdevice.c >> > >> +#endif /* __S390_ASM_UVDEVICE_H */ > > There are two spaces between the "endif" and the "/" > >> diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig >> index 6cc4b19acf85..e9b9902abbaf 100644 >> --- a/drivers/s390/char/Kconfig >> +++ b/drivers/s390/char/Kconfig >> @@ -100,6 +100,16 @@ config SCLP_OFB >> This option enables the Open-for-Business interface to the s390 >> Service Element. > [...] >> + * uvio_attestation() does a Retrieve Attestation Measurement >> Ultravisor Call. > > Double space > >> + * It verifies that the given userspace addresses are valid and >> request sizes >> + * are sane. Every other check is made by the Ultravisor (UV) and >> won't result >> + * in a negative return value. It copies the input to kernelspace, >> builds the >> + * request, sends the UV-call, and copies the result to userspace. >> + * >
On 5/17/22 10:42, Steffen Eiden wrote: > > > On 5/17/22 10:38, Janosch Frank wrote: >> On 5/10/22 16:47, Steffen Eiden wrote: >>> This patch adds a new miscdevice to expose some Ultravisor functions >>> to userspace. Userspace can send IOCTLs to the uvdevice that will then >>> emit a corresponding Ultravisor Call and hands the result over to >>> userspace. The uvdevice is available if the Ultravisor Call facility is >>> present. >>> Userspace can call the Retrieve Attestation Measurement >>> Ultravisor Call using IOCTLs on the uvdevice. >>> >>> The uvdevice will do some sanity checks first. >>> Then, copy the request data to kernel space, build the UVCB, >>> perform the UV call, and copy the result back to userspace. >>> >>> Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> >>> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> >> >> I'd like to pick this if I'm allowed to fix the two white space problems >> below. > I am fine with that. Thanks, picked > > Thank you. > >> >>> --- >>> MAINTAINERS | 2 + >>> arch/s390/include/asm/uv.h | 23 ++- >>> arch/s390/include/uapi/asm/uvdevice.h | 51 +++++ >>> drivers/s390/char/Kconfig | 10 + >>> drivers/s390/char/Makefile | 1 + >>> drivers/s390/char/uvdevice.c | 264 ++++++++++++++++++++++++++ >>> 6 files changed, 350 insertions(+), 1 deletion(-) >>> create mode 100644 arch/s390/include/uapi/asm/uvdevice.h >>> create mode 100644 drivers/s390/char/uvdevice.c >>> >> >>> +#endif /* __S390_ASM_UVDEVICE_H */ >> >> There are two spaces between the "endif" and the "/" >> >>> diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig >>> index 6cc4b19acf85..e9b9902abbaf 100644 >>> --- a/drivers/s390/char/Kconfig >>> +++ b/drivers/s390/char/Kconfig >>> @@ -100,6 +100,16 @@ config SCLP_OFB >>> This option enables the Open-for-Business interface to the s390 >>> Service Element. >> [...] >>> + * uvio_attestation() does a Retrieve Attestation Measurement >>> Ultravisor Call. >> >> Double space >> >>> + * It verifies that the given userspace addresses are valid and >>> request sizes >>> + * are sane. Every other check is made by the Ultravisor (UV) and >>> won't result >>> + * in a negative return value. It copies the input to kernelspace, >>> builds the >>> + * request, sends the UV-call, and copies the result to userspace. >>> + * >>
On Tue, May 10, 2022 at 02:47:23PM +0000, Steffen Eiden wrote: > diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig > index 6cc4b19acf85..e9b9902abbaf 100644 > --- a/drivers/s390/char/Kconfig > +++ b/drivers/s390/char/Kconfig > @@ -100,6 +100,16 @@ config SCLP_OFB > This option enables the Open-for-Business interface to the s390 > Service Element. > > +config S390_UV_UAPI > + def_tristate y > + prompt "Ultravisor userspace API" > + help > + Selecting exposes parts of the UV interface to userspace > + by providing a misc character device at /dev/uv. > + Using IOCTLs one can interact with the UV. > + The device is only available if the Ultravisor > + Facility (158) is present. Is there a reason why this is default "y"? If you think this should be compiled into the kernel if used, then why allow to make it a module at all? Instead you could get rid of a couple if lines of code.
On 5/18/22 13:47, Heiko Carstens wrote: > On Tue, May 10, 2022 at 02:47:23PM +0000, Steffen Eiden wrote: >> diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig >> index 6cc4b19acf85..e9b9902abbaf 100644 >> --- a/drivers/s390/char/Kconfig >> +++ b/drivers/s390/char/Kconfig >> @@ -100,6 +100,16 @@ config SCLP_OFB >> This option enables the Open-for-Business interface to the s390 >> Service Element. >> >> +config S390_UV_UAPI >> + def_tristate y >> + prompt "Ultravisor userspace API" >> + help >> + Selecting exposes parts of the UV interface to userspace >> + by providing a misc character device at /dev/uv. >> + Using IOCTLs one can interact with the UV. >> + The device is only available if the Ultravisor >> + Facility (158) is present. > > Is there a reason why this is default "y"? If you think this should be > compiled into the kernel if used, then why allow to make it a module > at all? > Instead you could get rid of a couple if lines of code. There was a lot of discussion around this already and the "Y" was chosen as auto-loading this is a pain and therefore the SCLP and CHSC-Misc set it to Y and we took that as an example (Steffen spoke to Peter to get guidance). I'm sure that we want the possibility to have this as a module. Personally I'd choose "m" over "y" since the module is only useful for a very small amount of users.
On 5/18/22 15:45, Janosch Frank wrote: > On 5/18/22 13:47, Heiko Carstens wrote: >> On Tue, May 10, 2022 at 02:47:23PM +0000, Steffen Eiden wrote: >>> diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig >>> index 6cc4b19acf85..e9b9902abbaf 100644 >>> --- a/drivers/s390/char/Kconfig >>> +++ b/drivers/s390/char/Kconfig >>> @@ -100,6 +100,16 @@ config SCLP_OFB >>> This option enables the Open-for-Business interface to the s390 >>> Service Element. >>> +config S390_UV_UAPI >>> + def_tristate y >>> + prompt "Ultravisor userspace API" >>> + help >>> + Selecting exposes parts of the UV interface to userspace >>> + by providing a misc character device at /dev/uv. >>> + Using IOCTLs one can interact with the UV. >>> + The device is only available if the Ultravisor >>> + Facility (158) is present. >> >> Is there a reason why this is default "y"? If you think this should be >> compiled into the kernel if used, then why allow to make it a module >> at all? >> Instead you could get rid of a couple if lines of code. > > There was a lot of discussion around this already and the "Y" was chosen > as auto-loading this is a pain and therefore the SCLP and CHSC-Misc set > it to Y and we took that as an example (Steffen spoke to Peter to get > guidance). > > I'm sure that we want the possibility to have this as a module. > Personally I'd choose "m" over "y" since the module is only useful for a > very small amount of users. I am fine with changing "y" to "m". Steffen
On Wed, May 18, 2022 at 03:45:27PM +0200, Janosch Frank wrote: > > > + The device is only available if the Ultravisor > > > + Facility (158) is present. > > > > Is there a reason why this is default "y"? If you think this should be > > compiled into the kernel if used, then why allow to make it a module > > at all? > > Instead you could get rid of a couple if lines of code. > > There was a lot of discussion around this already and the "Y" was chosen as > auto-loading this is a pain and therefore the SCLP and CHSC-Misc set it to Y > and we took that as an example (Steffen spoke to Peter to get guidance). > > I'm sure that we want the possibility to have this as a module. Personally > I'd choose "m" over "y" since the module is only useful for a very small > amount of users. Why not simply use module_cpu_feature_match() to implement auto module loading like we do it for the crypto modules? That would require that either the uv facility is represented within elf hwcaps, or alternatively the s390 implementation of cpu_feature() needs to be changed to work with cpu facilities instead of hwcap bits. (see arch/s390/include/asm/cpufeature.h) This doesn't look too difficult. Or was there a reason not to go this route?
On 5/19/22 07:37, Heiko Carstens wrote: > On Wed, May 18, 2022 at 03:45:27PM +0200, Janosch Frank wrote: >>>> + The device is only available if the Ultravisor >>>> + Facility (158) is present. >>> >>> Is there a reason why this is default "y"? If you think this should be >>> compiled into the kernel if used, then why allow to make it a module >>> at all? >>> Instead you could get rid of a couple if lines of code. >> >> There was a lot of discussion around this already and the "Y" was chosen as >> auto-loading this is a pain and therefore the SCLP and CHSC-Misc set it to Y >> and we took that as an example (Steffen spoke to Peter to get guidance). >> >> I'm sure that we want the possibility to have this as a module. Personally >> I'd choose "m" over "y" since the module is only useful for a very small >> amount of users. > > Why not simply use module_cpu_feature_match() to implement auto module > loading like we do it for the crypto modules? That would require that > either the uv facility is represented within elf hwcaps, or > alternatively the s390 implementation of cpu_feature() needs to be > changed to work with cpu facilities instead of hwcap bits. > (see arch/s390/include/asm/cpufeature.h) > > This doesn't look too difficult. Or was there a reason not to go this route? I'd guess we looked into the wrong direction for auto-load. We'll look into that for 5.20 but we'll take this patch with the "m" tristate for 5.19. Thanks for the pointer and review.
diff --git a/MAINTAINERS b/MAINTAINERS index e8c52d0192a6..b42ab4a35e18 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10781,9 +10781,11 @@ F: Documentation/virt/kvm/s390* F: arch/s390/include/asm/gmap.h F: arch/s390/include/asm/kvm* F: arch/s390/include/uapi/asm/kvm* +F: arch/s390/include/uapi/asm/uvdevice.h F: arch/s390/kernel/uv.c F: arch/s390/kvm/ F: arch/s390/mm/gmap.c +F: drivers/s390/char/uvdevice.c F: tools/testing/selftests/kvm/*/s390x/ F: tools/testing/selftests/kvm/s390x/ diff --git a/arch/s390/include/asm/uv.h b/arch/s390/include/asm/uv.h index a2d376b8bce3..cfea7b77a5b8 100644 --- a/arch/s390/include/asm/uv.h +++ b/arch/s390/include/asm/uv.h @@ -2,7 +2,7 @@ /* * Ultravisor Interfaces * - * Copyright IBM Corp. 2019 + * Copyright IBM Corp. 2019, 2022 * * Author(s): * Vasily Gorbik <gor@linux.ibm.com> @@ -52,6 +52,7 @@ #define UVC_CMD_UNPIN_PAGE_SHARED 0x0342 #define UVC_CMD_SET_SHARED_ACCESS 0x1000 #define UVC_CMD_REMOVE_SHARED_ACCESS 0x1001 +#define UVC_CMD_RETR_ATTEST 0x1020 /* Bits in installed uv calls */ enum uv_cmds_inst { @@ -76,6 +77,7 @@ enum uv_cmds_inst { BIT_UVC_CMD_UNSHARE_ALL = 20, BIT_UVC_CMD_PIN_PAGE_SHARED = 21, BIT_UVC_CMD_UNPIN_PAGE_SHARED = 22, + BIT_UVC_CMD_RETR_ATTEST = 28, }; enum uv_feat_ind { @@ -219,6 +221,25 @@ struct uv_cb_share { u64 reserved28; } __packed __aligned(8); +/* Retrieve Attestation Measurement */ +struct uv_cb_attest { + struct uv_cb_header header; /* 0x0000 */ + u64 reserved08[2]; /* 0x0008 */ + u64 arcb_addr; /* 0x0018 */ + u64 cont_token; /* 0x0020 */ + u8 reserved28[6]; /* 0x0028 */ + u16 user_data_len; /* 0x002e */ + u8 user_data[256]; /* 0x0030 */ + u32 reserved130[3]; /* 0x0130 */ + u32 meas_len; /* 0x013c */ + u64 meas_addr; /* 0x0140 */ + u8 config_uid[16]; /* 0x0148 */ + u32 reserved158; /* 0x0158 */ + u32 add_data_len; /* 0x015c */ + u64 add_data_addr; /* 0x0160 */ + u64 reserved168[4]; /* 0x0168 */ +} __packed __aligned(8); + static inline int __uv_call(unsigned long r1, unsigned long r2) { int cc; diff --git a/arch/s390/include/uapi/asm/uvdevice.h b/arch/s390/include/uapi/asm/uvdevice.h new file mode 100644 index 000000000000..d0bdde4969a1 --- /dev/null +++ b/arch/s390/include/uapi/asm/uvdevice.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright IBM Corp. 2022 + * Author(s): Steffen Eiden <seiden@linux.ibm.com> + */ +#ifndef __S390_ASM_UVDEVICE_H +#define __S390_ASM_UVDEVICE_H + +#include <linux/types.h> + +struct uvio_ioctl_cb { + __u32 flags; + __u16 uv_rc; /* UV header rc value */ + __u16 uv_rrc; /* UV header rrc value */ + __u64 argument_addr; /* Userspace address of uvio argument */ + __u32 argument_len; + __u8 reserved14[0x40 - 0x14]; /* must be zero */ +}; + +#define UVIO_ATT_USER_DATA_LEN 0x100 +#define UVIO_ATT_UID_LEN 0x10 +struct uvio_attest { + __u64 arcb_addr; /* 0x0000 */ + __u64 meas_addr; /* 0x0008 */ + __u64 add_data_addr; /* 0x0010 */ + __u8 user_data[UVIO_ATT_USER_DATA_LEN]; /* 0x0018 */ + __u8 config_uid[UVIO_ATT_UID_LEN]; /* 0x0118 */ + __u32 arcb_len; /* 0x0128 */ + __u32 meas_len; /* 0x012c */ + __u32 add_data_len; /* 0x0130 */ + __u16 user_data_len; /* 0x0134 */ + __u16 reserved136; /* 0x0136 */ +}; + +/* + * The following max values define an upper length for the IOCTL in/out buffers. + * However, they do not represent the maximum the Ultravisor allows which is + * often way smaller. By allowing larger buffer sizes we hopefully do not need + * to update the code with every machine update. It is therefore possible for + * userspace to request more memory than actually used by kernel/UV. + */ +#define UVIO_ATT_ARCB_MAX_LEN 0x100000 +#define UVIO_ATT_MEASUREMENT_MAX_LEN 0x8000 +#define UVIO_ATT_ADDITIONAL_MAX_LEN 0x8000 + +#define UVIO_DEVICE_NAME "uv" +#define UVIO_TYPE_UVC 'u' + +#define UVIO_IOCTL_ATT _IOWR(UVIO_TYPE_UVC, 0x01, struct uvio_ioctl_cb) + +#endif /* __S390_ASM_UVDEVICE_H */ diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 6cc4b19acf85..e9b9902abbaf 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -100,6 +100,16 @@ config SCLP_OFB This option enables the Open-for-Business interface to the s390 Service Element. +config S390_UV_UAPI + def_tristate y + prompt "Ultravisor userspace API" + help + Selecting exposes parts of the UV interface to userspace + by providing a misc character device at /dev/uv. + Using IOCTLs one can interact with the UV. + The device is only available if the Ultravisor + Facility (158) is present. + config S390_TAPE def_tristate m prompt "S/390 tape device support" diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index c6fdb81a068a..ce32270082f5 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_MONREADER) += monreader.o obj-$(CONFIG_MONWRITER) += monwriter.o obj-$(CONFIG_S390_VMUR) += vmur.o obj-$(CONFIG_CRASH_DUMP) += sclp_sdias.o zcore.o +obj-$(CONFIG_S390_UV_UAPI) += uvdevice.o hmcdrv-objs := hmcdrv_mod.o hmcdrv_dev.o hmcdrv_ftp.o hmcdrv_cache.o diag_ftp.o sclp_ftp.o obj-$(CONFIG_HMC_DRV) += hmcdrv.o diff --git a/drivers/s390/char/uvdevice.c b/drivers/s390/char/uvdevice.c new file mode 100644 index 000000000000..bcada86e8fc4 --- /dev/null +++ b/drivers/s390/char/uvdevice.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright IBM Corp. 2022 + * Author(s): Steffen Eiden <seiden@linux.ibm.com> + * + * This file provides a Linux misc device to give userspace access to some + * Ultravisor (UV) functions. The device only accepts IOCTLs and will only + * be present if the Ultravisor facility (158) is present. + * + * When userspace sends a valid IOCTL uvdevice will copy the input data to + * kernel space, do some basic validity checks to avoid kernel/system + * corruption. Any other check that the Ultravisor does will not be done by + * the uvdevice to keep changes minimal when adding new functionalities + * to existing UV-calls. + * After the checks uvdevice builds a corresponding + * Ultravisor Call Control Block, and sends the request to the Ultravisor. + * Then, it copies the response, including the return codes, back to userspace. + * It is the responsibility of the userspace to check for any error issued + * by UV and to interpret the UV response. The uvdevice acts as a communication + * channel for userspace to the Ultravisor. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/types.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include <asm/uvdevice.h> +#include <asm/uv.h> + +static int uvio_build_uvcb_attest(struct uv_cb_attest *uvcb_attest, u8 *arcb, + u8 *meas, u8 *add_data, struct uvio_attest *uvio_attest) +{ + void __user *user_buf_arcb = (void __user *)uvio_attest->arcb_addr; + + if (copy_from_user(arcb, user_buf_arcb, uvio_attest->arcb_len)) + return -EFAULT; + + uvcb_attest->header.len = sizeof(*uvcb_attest); + uvcb_attest->header.cmd = UVC_CMD_RETR_ATTEST; + uvcb_attest->arcb_addr = (u64)arcb; + uvcb_attest->cont_token = 0; + uvcb_attest->user_data_len = uvio_attest->user_data_len; + memcpy(uvcb_attest->user_data, uvio_attest->user_data, sizeof(uvcb_attest->user_data)); + uvcb_attest->meas_len = uvio_attest->meas_len; + uvcb_attest->meas_addr = (u64)meas; + uvcb_attest->add_data_len = uvio_attest->add_data_len; + uvcb_attest->add_data_addr = (u64)add_data; + + return 0; +} + +static int uvio_copy_attest_result_to_user(struct uv_cb_attest *uvcb_attest, + struct uvio_ioctl_cb *uv_ioctl, + u8 *measurement, u8 *add_data, + struct uvio_attest *uvio_attest) +{ + struct uvio_attest __user *user_uvio_attest = (void __user *)uv_ioctl->argument_addr; + void __user *user_buf_add = (void __user *)uvio_attest->add_data_addr; + void __user *user_buf_meas = (void __user *)uvio_attest->meas_addr; + void __user *user_buf_uid = &user_uvio_attest->config_uid; + + if (copy_to_user(user_buf_meas, measurement, uvio_attest->meas_len)) + return -EFAULT; + if (add_data && copy_to_user(user_buf_add, add_data, uvio_attest->add_data_len)) + return -EFAULT; + if (copy_to_user(user_buf_uid, uvcb_attest->config_uid, sizeof(uvcb_attest->config_uid))) + return -EFAULT; + return 0; +} + +static int get_uvio_attest(struct uvio_ioctl_cb *uv_ioctl, struct uvio_attest *uvio_attest) +{ + u8 __user *user_arg_buf = (u8 __user *)uv_ioctl->argument_addr; + + if (copy_from_user(uvio_attest, user_arg_buf, sizeof(*uvio_attest))) + return -EFAULT; + + if (uvio_attest->arcb_len > UVIO_ATT_ARCB_MAX_LEN) + return -EINVAL; + if (uvio_attest->arcb_len == 0) + return -EINVAL; + if (uvio_attest->meas_len > UVIO_ATT_MEASUREMENT_MAX_LEN) + return -EINVAL; + if (uvio_attest->meas_len == 0) + return -EINVAL; + if (uvio_attest->add_data_len > UVIO_ATT_ADDITIONAL_MAX_LEN) + return -EINVAL; + if (uvio_attest->reserved136) + return -EINVAL; + return 0; +} + +/** + * uvio_attestation() - Perform a Retrieve Attestation Measurement UVC. + * + * @uv_ioctl: ioctl control block + * + * uvio_attestation() does a Retrieve Attestation Measurement Ultravisor Call. + * It verifies that the given userspace addresses are valid and request sizes + * are sane. Every other check is made by the Ultravisor (UV) and won't result + * in a negative return value. It copies the input to kernelspace, builds the + * request, sends the UV-call, and copies the result to userspace. + * + * The Attestation Request has two input and two outputs. + * ARCB and User Data are inputs for the UV generated by userspace. + * Measurement and Additional Data are outputs for userspace generated by UV. + * + * The Attestation Request Control Block (ARCB) is a cryptographically verified + * and secured request to UV and User Data is some plaintext data which is + * going to be included in the Attestation Measurement calculation. + * + * Measurement is a cryptographic measurement of the callers properties, + * optional data configured by the ARCB and the user data. If specified by the + * ARCB, UV will add some Additional Data to the measurement calculation. + * This Additional Data is then returned as well. + * + * If the Retrieve Attestation Measurement UV facility is not present, + * UV will return invalid command rc. This won't be fenced in the driver + * and does not result in a negative return value. + * + * Context: might sleep + * + * Return: 0 on success or a negative error code on error. + */ +static int uvio_attestation(struct uvio_ioctl_cb *uv_ioctl) +{ + struct uv_cb_attest *uvcb_attest = NULL; + struct uvio_attest *uvio_attest = NULL; + u8 *measurement = NULL; + u8 *add_data = NULL; + u8 *arcb = NULL; + int ret; + + ret = -EINVAL; + if (uv_ioctl->argument_len != sizeof(*uvio_attest)) + goto out; + + ret = -ENOMEM; + uvio_attest = kzalloc(sizeof(*uvio_attest), GFP_KERNEL); + if (!uvio_attest) + goto out; + + ret = get_uvio_attest(uv_ioctl, uvio_attest); + if (ret) + goto out; + + ret = -ENOMEM; + arcb = kvzalloc(uvio_attest->arcb_len, GFP_KERNEL); + measurement = kvzalloc(uvio_attest->meas_len, GFP_KERNEL); + if (!arcb || !measurement) + goto out; + + if (uvio_attest->add_data_len) { + add_data = kvzalloc(uvio_attest->add_data_len, GFP_KERNEL); + if (!add_data) + goto out; + } + + uvcb_attest = kzalloc(sizeof(*uvcb_attest), GFP_KERNEL); + if (!uvcb_attest) + goto out; + + ret = uvio_build_uvcb_attest(uvcb_attest, arcb, measurement, add_data, uvio_attest); + if (ret) + goto out; + + uv_call_sched(0, (u64)uvcb_attest); + + uv_ioctl->uv_rc = uvcb_attest->header.rc; + uv_ioctl->uv_rrc = uvcb_attest->header.rrc; + + ret = uvio_copy_attest_result_to_user(uvcb_attest, uv_ioctl, measurement, add_data, + uvio_attest); +out: + kvfree(arcb); + kvfree(measurement); + kvfree(add_data); + kfree(uvio_attest); + kfree(uvcb_attest); + return ret; +} + +static int uvio_copy_and_check_ioctl(struct uvio_ioctl_cb *ioctl, void __user *argp) +{ + if (copy_from_user(ioctl, argp, sizeof(*ioctl))) + return -EFAULT; + if (ioctl->flags != 0) + return -EINVAL; + if (memchr_inv(ioctl->reserved14, 0, sizeof(ioctl->reserved14))) + return -EINVAL; + + return 0; +} + +/* + * IOCTL entry point for the Ultravisor device. + */ +static long uvio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + struct uvio_ioctl_cb *uv_ioctl; + long ret; + + ret = -ENOMEM; + uv_ioctl = vzalloc(sizeof(*uv_ioctl)); + if (!uv_ioctl) + goto out; + + switch (cmd) { + case UVIO_IOCTL_ATT: + ret = uvio_copy_and_check_ioctl(uv_ioctl, argp); + if (ret) + goto out; + ret = uvio_attestation(uv_ioctl); + break; + default: + ret = -ENOIOCTLCMD; + break; + } + if (ret) + goto out; + + if (copy_to_user(argp, uv_ioctl, sizeof(*uv_ioctl))) + ret = -EFAULT; + + out: + vfree(uv_ioctl); + return ret; +} + +static const struct file_operations uvio_dev_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = uvio_ioctl, + .llseek = no_llseek, +}; + +static struct miscdevice uvio_dev_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = UVIO_DEVICE_NAME, + .fops = &uvio_dev_fops, +}; + +static void __exit uvio_dev_exit(void) +{ + misc_deregister(&uvio_dev_miscdev); +} + +static int __init uvio_dev_init(void) +{ + if (!test_facility(158)) + return -ENXIO; + return misc_register(&uvio_dev_miscdev); +} + +module_init(uvio_dev_init); +module_exit(uvio_dev_exit); + +MODULE_AUTHOR("IBM Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Ultravisor UAPI driver");