@@ -99,8 +99,22 @@ DECLARE_FRED_HANDLER(fred_exc_debug);
DECLARE_FRED_HANDLER(fred_exc_page_fault);
DECLARE_FRED_HANDLER(fred_exc_machine_check);
+/*
+ * The actual assembly entry and exit points
+ */
+extern __visible void fred_entrypoint_user(void);
+
+/*
+ * Initialization
+ */
+void cpu_init_fred_exceptions(void);
+void fred_setup_apic(void);
+
#endif /* __ASSEMBLY__ */
+#else
+#define cpu_init_fred_exceptions() BUG()
+#define fred_setup_apic() BUG()
#endif /* CONFIG_X86_FRED */
#endif /* ASM_X86_FRED_H */
@@ -56,6 +56,8 @@ void __noreturn handle_stack_overflow(struct pt_regs *regs,
void f (struct pt_regs *regs)
typedef DECLARE_SYSTEM_INTERRUPT_HANDLER((*system_interrupt_handler));
+system_interrupt_handler get_system_interrupt_handler(unsigned int i);
+
int exc_raise_irq(struct pt_regs *regs, u32 vector);
int external_interrupt(struct pt_regs *regs, unsigned int vector);
@@ -48,6 +48,7 @@ obj-y += process_$(BITS).o signal.o
obj-$(CONFIG_COMPAT) += signal_compat.o
obj-y += traps.o idt.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time.o ioport.o dumpstack.o nmi.o
+obj-$(CONFIG_X86_FRED) += fred.o
obj-$(CONFIG_MODIFY_LDT_SYSCALL) += ldt.o
obj-y += setup.o x86_init.o i8259.o irqinit.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
@@ -57,6 +57,7 @@
#include <asm/microcode_intel.h>
#include <asm/intel-family.h>
#include <asm/cpu_device_id.h>
+#include <asm/fred.h>
#include <asm/uv/uv.h>
#include <asm/sigframe.h>
#include <asm/traps.h>
@@ -2034,28 +2035,6 @@ static void wrmsrl_cstar(unsigned long val)
/* May not be marked __init: used by software suspend */
void syscall_init(void)
{
- wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
- wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
-
-#ifdef CONFIG_IA32_EMULATION
- wrmsrl_cstar((unsigned long)entry_SYSCALL_compat);
- /*
- * This only works on Intel CPUs.
- * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
- * This does not cause SYSENTER to jump to the wrong location, because
- * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
- */
- wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
- wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
- (unsigned long)(cpu_entry_stack(smp_processor_id()) + 1));
- wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
-#else
- wrmsrl_cstar((unsigned long)ignore_sysret);
- wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
- wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
- wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
-#endif
-
/*
* Flags to clear on syscall; clear as much as possible
* to minimize user space-kernel interference.
@@ -2066,6 +2045,41 @@ void syscall_init(void)
X86_EFLAGS_IF|X86_EFLAGS_DF|X86_EFLAGS_OF|
X86_EFLAGS_IOPL|X86_EFLAGS_NT|X86_EFLAGS_RF|
X86_EFLAGS_AC|X86_EFLAGS_ID);
+
+ /*
+ * The default user and kernel segments
+ */
+ wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
+
+ if (cpu_feature_enabled(X86_FEATURE_FRED)) {
+ /* Both sysexit and sysret cause #UD when FRED is enabled */
+ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
+ wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+ } else {
+ wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
+
+#ifdef CONFIG_IA32_EMULATION
+ wrmsrl_cstar((unsigned long)entry_SYSCALL_compat);
+ /*
+ * This only works on Intel CPUs.
+ * On AMD CPUs these MSRs are 32-bit, CPU truncates
+ * MSR_IA32_SYSENTER_EIP.
+ * This does not cause SYSENTER to jump to the wrong
+ * location, because AMD doesn't allow SYSENTER in
+ * long mode (either 32- or 64-bit).
+ */
+ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
+ wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
+ (unsigned long)(cpu_entry_stack(smp_processor_id()) + 1));
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
+#else
+ wrmsrl_cstar((unsigned long)ignore_sysret);
+ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
+ wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+#endif
+ }
}
#else /* CONFIG_X86_64 */
@@ -2214,18 +2228,24 @@ void cpu_init_exception_handling(void)
/* paranoid_entry() gets the CPU number from the GDT */
setup_getcpu(cpu);
- /* IST vectors need TSS to be set up. */
- tss_setup_ist(tss);
+ /* Set up the TSS */
tss_setup_io_bitmap(tss);
set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
-
load_TR_desc();
/* GHCB needs to be setup to handle #VC. */
setup_ghcb();
- /* Finally load the IDT */
- load_current_idt();
+ if (cpu_feature_enabled(X86_FEATURE_FRED)) {
+ /* Set up FRED exception handling */
+ cpu_init_fred_exceptions();
+ } else {
+ /* IST vectors need TSS to be set up. */
+ tss_setup_ist(tss);
+
+ /* Finally load the IDT */
+ load_current_idt();
+ }
}
/*
new file mode 100644
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/kernel.h>
+#include <asm/desc.h>
+#include <asm/fred.h>
+#include <asm/tlbflush.h> /* For cr4_set_bits() */
+#include <asm/traps.h>
+
+/*
+ * Initialize FRED on this CPU. This cannot be __init as it is called
+ * during CPU hotplug.
+ */
+void cpu_init_fred_exceptions(void)
+{
+ wrmsrl(MSR_IA32_FRED_CONFIG,
+ FRED_CONFIG_ENTRYPOINT(fred_entrypoint_user) |
+ FRED_CONFIG_REDZONE(8) | /* Reserve for CALL emulation */
+ FRED_CONFIG_INT_STKLVL(0));
+
+ wrmsrl(MSR_IA32_FRED_STKLVLS,
+ FRED_STKLVL(X86_TRAP_DB, 1) |
+ FRED_STKLVL(X86_TRAP_NMI, 2) |
+ FRED_STKLVL(X86_TRAP_MC, 2) |
+ FRED_STKLVL(X86_TRAP_DF, 3));
+
+ /* The FRED equivalents to IST stacks... */
+ wrmsrl(MSR_IA32_FRED_RSP1, __this_cpu_ist_top_va(DB));
+ wrmsrl(MSR_IA32_FRED_RSP2, __this_cpu_ist_top_va(NMI));
+ wrmsrl(MSR_IA32_FRED_RSP3, __this_cpu_ist_top_va(DF));
+
+ /* Not used with FRED */
+ wrmsrl(MSR_LSTAR, 0ULL);
+ wrmsrl(MSR_CSTAR, 0ULL);
+ wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)GDT_ENTRY_INVALID_SEG);
+ wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL);
+ wrmsrl_safe(MSR_IA32_SYSENTER_EIP, 0ULL);
+
+ /* Enable FRED */
+ cr4_set_bits(X86_CR4_FRED);
+ idt_invalidate(); /* Any further IDT use is a bug */
+
+ /* Use int $0x80 for 32-bit system calls in FRED mode */
+ setup_clear_cpu_cap(X86_FEATURE_SYSENTER32);
+ setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
+}
+
+/*
+ * Initialize system vectors from a FRED perspective, so
+ * lapic_assign_system_vectors() can do its job.
+ */
+void __init fred_setup_apic(void)
+{
+ int i;
+
+ for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
+ set_bit(i, system_vectors);
+
+ /*
+ * Don't set the non assigned system vectors in the
+ * system_vectors bitmap. Otherwise they show up in
+ * /proc/interrupts.
+ */
+#ifdef CONFIG_SMP
+ set_bit(IRQ_MOVE_CLEANUP_VECTOR, system_vectors);
+#endif
+
+ for (i = 0; i < NR_SYSTEM_VECTORS; i++) {
+ if (get_system_interrupt_handler(i) != NULL) {
+ set_bit(i + FIRST_SYSTEM_VECTOR, system_vectors);
+ }
+ }
+
+ /* The rest are fair game... */
+}
@@ -28,6 +28,7 @@
#include <asm/setup.h>
#include <asm/i8259.h>
#include <asm/traps.h>
+#include <asm/fred.h>
#include <asm/prom.h>
/*
@@ -94,7 +95,11 @@ void __init native_init_IRQ(void)
/* Execute any quirks before the call gates are initialised: */
x86_init.irqs.pre_vector_init();
- idt_setup_apic_and_irq_gates();
+ if (cpu_feature_enabled(X86_FEATURE_FRED))
+ fred_setup_apic();
+ else
+ idt_setup_apic_and_irq_gates();
+
lapic_assign_system_vectors();
if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) {
@@ -1517,12 +1517,21 @@ static system_interrupt_handler system_interrupt_handlers[NR_SYSTEM_VECTORS] = {
#undef SYSV
+system_interrupt_handler get_system_interrupt_handler(unsigned int i)
+{
+ if (i >= NR_SYSTEM_VECTORS)
+ return NULL;
+
+ return system_interrupt_handlers[i];
+}
+
void __init install_system_interrupt_handler(unsigned int n, const void *asm_addr, const void *addr)
{
BUG_ON(n < FIRST_SYSTEM_VECTOR);
system_interrupt_handlers[n - FIRST_SYSTEM_VECTOR] = (system_interrupt_handler)addr;
- alloc_intr_gate(n, asm_addr);
+ if (!cpu_feature_enabled(X86_FEATURE_FRED))
+ alloc_intr_gate(n, asm_addr);
}
#ifndef CONFIG_X86_LOCAL_APIC
@@ -1590,7 +1599,10 @@ void __init trap_init(void)
/* Initialize TSS before setting up traps so ISTs work */
cpu_init_exception_handling();
+
/* Setup traps as cpu_init() might #GP */
- idt_setup_traps();
+ if (!cpu_feature_enabled(X86_FEATURE_FRED))
+ idt_setup_traps();
+
cpu_init();
}