@@ -19,6 +19,7 @@
#include <asm/cpu.h>
#include <asm/irq_remapping.h>
#include <asm/pci-direct.h>
+#include <asm/posted_intr.h>
#include "iommu.h"
#include "../irq_remapping.h"
@@ -49,6 +50,7 @@ struct irq_2_iommu {
u16 sub_handle;
u8 irte_mask;
enum irq_mode mode;
+ bool posted_msi;
};
struct intel_ir_data {
@@ -1118,6 +1120,14 @@ static void prepare_irte(struct irte *irte, int vector, unsigned int dest)
irte->redir_hint = 1;
}
+static void prepare_irte_posted(struct irte *irte)
+{
+ memset(irte, 0, sizeof(*irte));
+
+ irte->present = 1;
+ irte->p_pst = 1;
+}
+
struct irq_remap_ops intel_irq_remap_ops = {
.prepare = intel_prepare_irq_remapping,
.enable = intel_enable_irq_remapping,
@@ -1126,6 +1136,47 @@ struct irq_remap_ops intel_irq_remap_ops = {
.enable_faulting = enable_drhd_fault_handling,
};
+#ifdef CONFIG_X86_POSTED_MSI
+
+static phys_addr_t get_pi_desc_addr(struct irq_data *irqd)
+{
+ int cpu = cpumask_first(irq_data_get_effective_affinity_mask(irqd));
+
+ if (WARN_ON(cpu >= nr_cpu_ids))
+ return 0;
+
+ return __pa(per_cpu_ptr(&posted_msi_pi_desc, cpu));
+}
+
+static void intel_ir_reconfigure_irte_posted(struct irq_data *irqd)
+{
+ struct intel_ir_data *ir_data = irqd->chip_data;
+ struct irte *irte = &ir_data->irte_entry;
+ struct irte irte_pi;
+ u64 pid_addr;
+
+ pid_addr = get_pi_desc_addr(irqd);
+
+ if (!pid_addr) {
+ pr_warn("Failed to setup IRQ %d for posted mode", irqd->irq);
+ return;
+ }
+
+ memset(&irte_pi, 0, sizeof(irte_pi));
+
+ /* The shared IRTE already be set up as posted during alloc_irte */
+ dmar_copy_shared_irte(&irte_pi, irte);
+
+ irte_pi.pda_l = (pid_addr >> (32 - PDA_LOW_BIT)) & ~(-1UL << PDA_LOW_BIT);
+ irte_pi.pda_h = (pid_addr >> 32) & ~(-1UL << PDA_HIGH_BIT);
+
+ modify_irte(&ir_data->irq_2_iommu, &irte_pi);
+}
+
+#else
+static inline void intel_ir_reconfigure_irte_posted(struct irq_data *irqd) {}
+#endif
+
static void intel_ir_reconfigure_irte(struct irq_data *irqd, bool force)
{
struct intel_ir_data *ir_data = irqd->chip_data;
@@ -1139,8 +1190,9 @@ static void intel_ir_reconfigure_irte(struct irq_data *irqd, bool force)
irte->vector = cfg->vector;
irte->dest_id = IRTE_DEST(cfg->dest_apicid);
- /* Update the hardware only if the interrupt is in remapped mode. */
- if (force || ir_data->irq_2_iommu.mode == IRQ_REMAPPING)
+ if (ir_data->irq_2_iommu.posted_msi)
+ intel_ir_reconfigure_irte_posted(irqd);
+ else if (force || ir_data->irq_2_iommu.mode == IRQ_REMAPPING)
modify_irte(&ir_data->irq_2_iommu, irte);
}
@@ -1194,7 +1246,7 @@ static int intel_ir_set_vcpu_affinity(struct irq_data *data, void *info)
struct intel_ir_data *ir_data = data->chip_data;
struct vcpu_data *vcpu_pi_info = info;
- /* stop posting interrupts, back to remapping mode */
+ /* stop posting interrupts, back to the default mode */
if (!vcpu_pi_info) {
modify_irte(&ir_data->irq_2_iommu, &ir_data->irte_entry);
} else {
@@ -1233,6 +1285,50 @@ static struct irq_chip intel_ir_chip = {
.irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity,
};
+static void dummy(struct irq_data *d)
+{
+}
+
+/*
+ * With posted MSIs, all vectors are multiplexed into a single notification
+ * vector. Devices MSIs are then dispatched in a demux loop where
+ * EOIs can be coalesced as well.
+ *
+ * "INTEL-IR-POST" IRQ chip does not do EOI on ACK, thus the dummy irq_ack()
+ * function. Instead EOI is performed by the posted interrupt notification
+ * handler.
+ *
+ * For the example below, 3 MSIs are coalesced into one CPU notification. Only
+ * one apic_eoi() is needed.
+ *
+ * __sysvec_posted_msi_notification()
+ * irq_enter();
+ * handle_edge_irq()
+ * irq_chip_ack_parent()
+ * dummy(); // No EOI
+ * handle_irq_event()
+ * driver_handler()
+ * handle_edge_irq()
+ * irq_chip_ack_parent()
+ * dummy(); // No EOI
+ * handle_irq_event()
+ * driver_handler()
+ * handle_edge_irq()
+ * irq_chip_ack_parent()
+ * dummy(); // No EOI
+ * handle_irq_event()
+ * driver_handler()
+ * apic_eoi()
+ * irq_exit()
+ */
+static struct irq_chip intel_ir_chip_post_msi = {
+ .name = "INTEL-IR-POST",
+ .irq_ack = dummy,
+ .irq_set_affinity = intel_ir_set_affinity,
+ .irq_compose_msi_msg = intel_ir_compose_msi_msg,
+ .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity,
+};
+
static void fill_msi_msg(struct msi_msg *msg, u32 index, u32 subhandle)
{
memset(msg, 0, sizeof(*msg));
@@ -1274,6 +1370,11 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
break;
case X86_IRQ_ALLOC_TYPE_PCI_MSI:
case X86_IRQ_ALLOC_TYPE_PCI_MSIX:
+ if (posted_msi_supported()) {
+ prepare_irte_posted(irte);
+ data->irq_2_iommu.posted_msi = 1;
+ }
+
set_msi_sid(irte,
pci_real_dma_dev(msi_desc_to_pci_dev(info->desc)));
break;
@@ -1361,7 +1462,11 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
irq_data->hwirq = (index << 16) + i;
irq_data->chip_data = ird;
- irq_data->chip = &intel_ir_chip;
+ if (posted_msi_supported() &&
+ ((info->type == X86_IRQ_ALLOC_TYPE_PCI_MSI) || (info->type == X86_IRQ_ALLOC_TYPE_PCI_MSIX)))
+ irq_data->chip = &intel_ir_chip_post_msi;
+ else
+ irq_data->chip = &intel_ir_chip;
intel_irq_remapping_prepare_irte(ird, irq_cfg, info, index, i);
irq_set_status_flags(virq + i, IRQ_MOVE_PCNTXT);
}
With posted MSI feature enabled on the CPU side, iommu interrupt remapping table entries (IRTEs) for device MSI/x can be allocated, activated, and programed in posted mode. This means that IRTEs are linked with their respective PIDs of the target CPU. Handlers for the posted MSI notification vector will de-multiplex device MSI handlers. CPU notifications are coalesced if interrupts arrive at a high frequency. Excluding the following: - legacy devices IOAPIC, HPET (may be needed for booting, not a source of high MSIs) A new irq_chip for posted MSIs is introduced, the key difference is in irq_ack where EOI is performed by the notification handler. When posted MSI is enabled, MSI domain/chip hierarchy will look like this example: domain: IR-PCI-MSIX-0000:50:00.0-12 hwirq: 0x29 chip: IR-PCI-MSIX-0000:50:00.0 flags: 0x430 IRQCHIP_SKIP_SET_WAKE IRQCHIP_ONESHOT_SAFE parent: domain: INTEL-IR-10-13 hwirq: 0x2d0000 chip: INTEL-IR-POST flags: 0x0 parent: domain: VECTOR hwirq: 0x77 chip: APIC VT-d's own IRQs (not remappable). Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> --- v3: - Remove extra irq_enter() in comments - Fold in the introduction of posted MSI IRQ chip patch v2: Fold in helper function for retrieving PID address v1: Added a warning if the effective affinity mask is not set up --- drivers/iommu/intel/irq_remapping.c | 113 +++++++++++++++++++++++++++- 1 file changed, 109 insertions(+), 4 deletions(-)