diff mbox series

[v3,08/15] KVM: arm64: Spin off helper for programming CPTR traps

Message ID 20240620164653.1130714-9-oliver.upton@linux.dev (mailing list archive)
State New, archived
Headers show
Series KVM: arm64: nv: FPSIMD/SVE, plus some other CPTR goodies | expand

Commit Message

Oliver Upton June 20, 2024, 4:46 p.m. UTC 
A subsequent change to KVM will add preliminary support for merging a
guest hypervisor's CPTR traps with that of KVM. Prepare by spinning off
a new helper for managing CPTR traps.

Avoid reading CPACR_EL1 for the baseline trap config, and start off with
the most restrictive set of traps that is subsequently relaxed.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
---
 arch/arm64/kvm/hyp/vhe/switch.c | 49 ++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index d7af5f46f22a..697253673d7b 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -65,6 +65,29 @@  static u64 __compute_hcr(struct kvm_vcpu *vcpu)
 	return hcr | (__vcpu_sys_reg(vcpu, HCR_EL2) & ~NV_HCR_GUEST_EXCLUDE);
 }
 
+static void __activate_cptr_traps(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
+	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
+	 * except for some missing controls, such as TAM.
+	 * In this case, CPTR_EL2.TAM has the same position with or without
+	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
+	 * shift value for trapping the AMU accesses.
+	 */
+	u64 val = CPACR_ELx_TTA | CPTR_EL2_TAM;
+
+	if (guest_owns_fp_regs()) {
+		val |= CPACR_ELx_FPEN;
+		if (vcpu_has_sve(vcpu))
+			val |= CPACR_ELx_ZEN;
+	} else {
+		__activate_traps_fpsimd32(vcpu);
+	}
+
+	write_sysreg(val, cpacr_el1);
+}
+
 static void __activate_traps(struct kvm_vcpu *vcpu)
 {
 	u64 val;
@@ -91,31 +114,7 @@  static void __activate_traps(struct kvm_vcpu *vcpu)
 		}
 	}
 
-	val = read_sysreg(cpacr_el1);
-	val |= CPACR_ELx_TTA;
-	val &= ~(CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN |
-		 CPACR_EL1_SMEN_EL0EN | CPACR_EL1_SMEN_EL1EN);
-
-	/*
-	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
-	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
-	 * except for some missing controls, such as TAM.
-	 * In this case, CPTR_EL2.TAM has the same position with or without
-	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
-	 * shift value for trapping the AMU accesses.
-	 */
-
-	val |= CPTR_EL2_TAM;
-
-	if (guest_owns_fp_regs()) {
-		if (vcpu_has_sve(vcpu))
-			val |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
-	} else {
-		val &= ~(CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN);
-		__activate_traps_fpsimd32(vcpu);
-	}
-
-	write_sysreg(val, cpacr_el1);
+	__activate_cptr_traps(vcpu);
 
 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el1);
 }