@@ -19,6 +19,15 @@
#define EXPECTED_INSTR 17
#define EXPECTED_BRNCH 5
+#define LOOP_ASM(_wrmsr) \
+ _wrmsr "\n\t" \
+ "mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t" \
+ "1: mov (%1), %2; add $64, %1;\n\t" \
+ "nop; nop; nop; nop; nop; nop; nop;\n\t" \
+ "loop 1b;\n\t" \
+ "mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t" \
+ _wrmsr "\n\t"
+
typedef struct {
uint32_t ctr;
uint32_t idx;
@@ -74,13 +83,43 @@ char *buf;
static struct pmu_event *gp_events;
static unsigned int gp_events_size;
-static inline void loop(void)
+
+static inline void __loop(void)
+{
+ unsigned long tmp, tmp2, tmp3;
+
+ asm volatile(LOOP_ASM("nop")
+ : "=c"(tmp), "=r"(tmp2), "=r"(tmp3)
+ : "0"(N), "1"(buf));
+}
+
+/*
+ * Enable and disable counters in a whole asm blob to ensure
+ * no other instructions are counted in the window between
+ * counters enabling and really LOOP_ASM code executing.
+ * Thus counters can verify instructions and branches events
+ * against precise counts instead of a rough valid count range.
+ */
+static inline void __precise_loop(u64 cntrs)
{
unsigned long tmp, tmp2, tmp3;
+ unsigned int global_ctl = pmu.msr_global_ctl;
+ u32 eax = cntrs & (BIT_ULL(32) - 1);
+ u32 edx = cntrs >> 32;
- asm volatile("1: mov (%1), %2; add $64, %1; nop; nop; nop; nop; nop; nop; nop; loop 1b"
- : "=c"(tmp), "=r"(tmp2), "=r"(tmp3): "0"(N), "1"(buf));
+ asm volatile(LOOP_ASM("wrmsr")
+ : "=b"(tmp), "=r"(tmp2), "=r"(tmp3)
+ : "a"(eax), "d"(edx), "c"(global_ctl),
+ "0"(N), "1"(buf)
+ : "edi");
+}
+static inline void loop(u64 cntrs)
+{
+ if (!this_cpu_has_perf_global_ctrl())
+ __loop();
+ else
+ __precise_loop(cntrs);
}
volatile uint64_t irq_received;
@@ -180,18 +219,17 @@ static void __start_event(pmu_counter_t *evt, uint64_t count)
ctrl = (ctrl & ~(0xf << shift)) | (usrospmi << shift);
wrmsr(MSR_CORE_PERF_FIXED_CTR_CTRL, ctrl);
}
- global_enable(evt);
apic_write(APIC_LVTPC, PMI_VECTOR);
}
static void start_event(pmu_counter_t *evt)
{
__start_event(evt, 0);
+ global_enable(evt);
}
-static void stop_event(pmu_counter_t *evt)
+static void __stop_event(pmu_counter_t *evt)
{
- global_disable(evt);
if (is_gp(evt)) {
wrmsr(MSR_GP_EVENT_SELECTx(event_to_global_idx(evt)),
evt->config & ~EVNTSEL_EN);
@@ -203,14 +241,24 @@ static void stop_event(pmu_counter_t *evt)
evt->count = rdmsr(evt->ctr);
}
+static void stop_event(pmu_counter_t *evt)
+{
+ global_disable(evt);
+ __stop_event(evt);
+}
+
static noinline void measure_many(pmu_counter_t *evt, int count)
{
int i;
+ u64 cntrs = 0;
+
+ for (i = 0; i < count; i++) {
+ __start_event(&evt[i], 0);
+ cntrs |= BIT_ULL(event_to_global_idx(&evt[i]));
+ }
+ loop(cntrs);
for (i = 0; i < count; i++)
- start_event(&evt[i]);
- loop();
- for (i = 0; i < count; i++)
- stop_event(&evt[i]);
+ __stop_event(&evt[i]);
}
static void measure_one(pmu_counter_t *evt)
@@ -220,9 +268,11 @@ static void measure_one(pmu_counter_t *evt)
static noinline void __measure(pmu_counter_t *evt, uint64_t count)
{
+ u64 cntrs = BIT_ULL(event_to_global_idx(evt));
+
__start_event(evt, count);
- loop();
- stop_event(evt);
+ loop(cntrs);
+ __stop_event(evt);
}
static bool verify_event(uint64_t count, struct pmu_event *e)
@@ -485,7 +535,7 @@ static void check_running_counter_wrmsr(void)
report_prefix_push("running counter wrmsr");
start_event(&evt);
- loop();
+ __loop();
wrmsr(MSR_GP_COUNTERx(0), 0);
stop_event(&evt);
report(evt.count < gp_events[instruction_idx].min, "cntr");
@@ -502,7 +552,7 @@ static void check_running_counter_wrmsr(void)
wrmsr(MSR_GP_COUNTERx(0), count);
- loop();
+ __loop();
stop_event(&evt);
if (this_cpu_has_perf_global_status()) {
@@ -643,7 +693,7 @@ static void warm_up(void)
* the real verification.
*/
while (i--)
- loop();
+ loop(0);
}
static void check_counters(void)
Currently enabling PMCs, executing loop() and disabling PMCs are divided 3 separated functions. So there could be other instructions executed between enabling PMCS and running loop() or running loop() and disabling PMCs, e.g. if there are multiple counters enabled in measure_many() function, the instructions which enabling the 2nd and more counters would be counted in by the 1st counter. So current implementation can only verify the correctness of count by an rough range rather than a precise count even for instructions and branches events. Strictly speaking, this verification is meaningless as the test could still pass even though KVM vPMU has something wrong and reports an incorrect instructions or branches count which is in the rough range. Thus, move the PMCs enabling and disabling into the loop() asm blob and ensure only the loop asm instructions would be counted, then the instructions or branches events can be verified with an precise count instead of an rough range. Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> --- x86/pmu.c | 80 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 65 insertions(+), 15 deletions(-)