Message ID | b486cb75-4b8e-c847-a019-81e822223fb6@web.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | kvm: arm: Promote KVM_ARM_TARGET_CORTEX_A7 to generic V7 core | expand |
On 30.06.19 17:19, Jan Kiszka wrote: > From: Jan Kiszka <jan.kiszka@siemens.com> > > The only difference between the currently supported A15 and A7 target > cores is the reset state of bit 11 in SCTLR. This bit is RES1 or RAO/WI > in other ARM cores, including ARMv8 ones. By promoting A7 to a generic > default target, this allows to use yet unsupported core types. E.g., > this enables KVM on the A72 of the RPi4. > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> > --- > arch/arm/include/uapi/asm/kvm.h | 1 + > arch/arm/kvm/Makefile | 2 +- > arch/arm/kvm/{coproc_a7.c => coproc_generic.c} | 18 +++++++++--------- > arch/arm/kvm/guest.c | 4 +--- > arch/arm/kvm/reset.c | 5 +---- > 5 files changed, 13 insertions(+), 17 deletions(-) > rename arch/arm/kvm/{coproc_a7.c => coproc_generic.c} (70%) > > diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h > index 4602464ebdfb..e0c5bbec3d3d 100644 > --- a/arch/arm/include/uapi/asm/kvm.h > +++ b/arch/arm/include/uapi/asm/kvm.h > @@ -70,6 +70,7 @@ struct kvm_regs { > /* Supported Processor Types */ > #define KVM_ARM_TARGET_CORTEX_A15 0 > #define KVM_ARM_TARGET_CORTEX_A7 1 > +#define KVM_ARM_TARGET_GENERIC_V7 KVM_ARM_TARGET_CORTEX_A7 > #define KVM_ARM_NUM_TARGETS 2 > > /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ > diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile > index 531e59f5be9c..d959f89135d6 100644 > --- a/arch/arm/kvm/Makefile > +++ b/arch/arm/kvm/Makefile > @@ -21,7 +21,7 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/ > > obj-y += kvm-arm.o init.o interrupts.o > obj-y += handle_exit.o guest.o emulate.o reset.o > -obj-y += coproc.o coproc_a15.o coproc_a7.o vgic-v3-coproc.o > +obj-y += coproc.o coproc_a15.o coproc_generic.o vgic-v3-coproc.o > obj-y += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o > obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o > obj-y += $(KVM)/arm/aarch32.o > diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_generic.c > similarity index 70% > rename from arch/arm/kvm/coproc_a7.c > rename to arch/arm/kvm/coproc_generic.c > index 40f643e1e05c..b32a541ad7bf 100644 > --- a/arch/arm/kvm/coproc_a7.c > +++ b/arch/arm/kvm/coproc_generic.c > @@ -15,28 +15,28 @@ > #include "coproc.h" > > /* > - * Cortex-A7 specific CP15 registers. > + * Generic CP15 registers. > * CRn denotes the primary register number, but is copied to the CRm in the > * user space API for 64-bit register access in line with the terminology used > * in the ARM ARM. > * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit > * registers preceding 32-bit ones. > */ > -static const struct coproc_reg a7_regs[] = { > +static const struct coproc_reg generic_regs[] = { > /* SCTLR: swapped by interrupt.S. */ > { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, > access_vm_reg, reset_val, c1_SCTLR, 0x00C50878 }, > }; > > -static struct kvm_coproc_target_table a7_target_table = { > - .target = KVM_ARM_TARGET_CORTEX_A7, > - .table = a7_regs, > - .num = ARRAY_SIZE(a7_regs), > +static struct kvm_coproc_target_table generic_target_table = { > + .target = KVM_ARM_TARGET_GENERIC_V7, > + .table = generic_regs, > + .num = ARRAY_SIZE(generic_regs), > }; > > -static int __init coproc_a7_init(void) > +static int __init coproc_generic_init(void) > { > - kvm_register_target_coproc_table(&a7_target_table); > + kvm_register_target_coproc_table(&generic_target_table); > return 0; > } > -late_initcall(coproc_a7_init); > +late_initcall(coproc_generic_init); > diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c > index 684cf64b4033..d33a24e70f49 100644 > --- a/arch/arm/kvm/guest.c > +++ b/arch/arm/kvm/guest.c > @@ -275,12 +275,10 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, > int __attribute_const__ kvm_target_cpu(void) > { > switch (read_cpuid_part()) { > - case ARM_CPU_PART_CORTEX_A7: > - return KVM_ARM_TARGET_CORTEX_A7; > case ARM_CPU_PART_CORTEX_A15: > return KVM_ARM_TARGET_CORTEX_A15; > default: > - return -EINVAL; > + return KVM_ARM_TARGET_GENERIC_V7; > } > } > > diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c > index eb4174f6ebbd..d6e07500bab4 100644 > --- a/arch/arm/kvm/reset.c > +++ b/arch/arm/kvm/reset.c > @@ -43,13 +43,10 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) > struct kvm_regs *reset_regs; > > switch (vcpu->arch.target) { > - case KVM_ARM_TARGET_CORTEX_A7: > - case KVM_ARM_TARGET_CORTEX_A15: > + default: > reset_regs = &cortexa_regs_reset; > vcpu->arch.midr = read_cpuid_id(); > break; > - default: > - return -ENODEV; > } > > /* Reset core registers */ > -- > 2.16.4 > Any comments on this one now? Vladimir, you had some concerns in the other thread. I'm not sure if I got them correctly, if they apply here. Jan
On Wed, Jul 31, 2019 at 10:17:53AM +0200, Jan Kiszka wrote: > On 30.06.19 17:19, Jan Kiszka wrote: > > From: Jan Kiszka <jan.kiszka@siemens.com> > > > > The only difference between the currently supported A15 and A7 target > > cores is the reset state of bit 11 in SCTLR. This bit is RES1 or RAO/WI > > in other ARM cores, including ARMv8 ones. By promoting A7 to a generic > > default target, this allows to use yet unsupported core types. E.g., > > this enables KVM on the A72 of the RPi4. > > > > Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> > > --- > > arch/arm/include/uapi/asm/kvm.h | 1 + > > arch/arm/kvm/Makefile | 2 +- > > arch/arm/kvm/{coproc_a7.c => coproc_generic.c} | 18 +++++++++--------- > > arch/arm/kvm/guest.c | 4 +--- > > arch/arm/kvm/reset.c | 5 +---- > > 5 files changed, 13 insertions(+), 17 deletions(-) > > rename arch/arm/kvm/{coproc_a7.c => coproc_generic.c} (70%) > > > > diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h > > index 4602464ebdfb..e0c5bbec3d3d 100644 > > --- a/arch/arm/include/uapi/asm/kvm.h > > +++ b/arch/arm/include/uapi/asm/kvm.h > > @@ -70,6 +70,7 @@ struct kvm_regs { > > /* Supported Processor Types */ > > #define KVM_ARM_TARGET_CORTEX_A15 0 > > #define KVM_ARM_TARGET_CORTEX_A7 1 > > +#define KVM_ARM_TARGET_GENERIC_V7 KVM_ARM_TARGET_CORTEX_A7 > > #define KVM_ARM_NUM_TARGETS 2 > > > > /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ > > diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile > > index 531e59f5be9c..d959f89135d6 100644 > > --- a/arch/arm/kvm/Makefile > > +++ b/arch/arm/kvm/Makefile > > @@ -21,7 +21,7 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/ > > > > obj-y += kvm-arm.o init.o interrupts.o > > obj-y += handle_exit.o guest.o emulate.o reset.o > > -obj-y += coproc.o coproc_a15.o coproc_a7.o vgic-v3-coproc.o > > +obj-y += coproc.o coproc_a15.o coproc_generic.o vgic-v3-coproc.o > > obj-y += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o > > obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o > > obj-y += $(KVM)/arm/aarch32.o > > diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_generic.c > > similarity index 70% > > rename from arch/arm/kvm/coproc_a7.c > > rename to arch/arm/kvm/coproc_generic.c > > index 40f643e1e05c..b32a541ad7bf 100644 > > --- a/arch/arm/kvm/coproc_a7.c > > +++ b/arch/arm/kvm/coproc_generic.c > > @@ -15,28 +15,28 @@ > > #include "coproc.h" > > > > /* > > - * Cortex-A7 specific CP15 registers. > > + * Generic CP15 registers. > > * CRn denotes the primary register number, but is copied to the CRm in the > > * user space API for 64-bit register access in line with the terminology used > > * in the ARM ARM. > > * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit > > * registers preceding 32-bit ones. > > */ > > -static const struct coproc_reg a7_regs[] = { > > +static const struct coproc_reg generic_regs[] = { > > /* SCTLR: swapped by interrupt.S. */ > > { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, > > access_vm_reg, reset_val, c1_SCTLR, 0x00C50878 }, > > }; > > > > -static struct kvm_coproc_target_table a7_target_table = { > > - .target = KVM_ARM_TARGET_CORTEX_A7, > > - .table = a7_regs, > > - .num = ARRAY_SIZE(a7_regs), > > +static struct kvm_coproc_target_table generic_target_table = { > > + .target = KVM_ARM_TARGET_GENERIC_V7, > > + .table = generic_regs, > > + .num = ARRAY_SIZE(generic_regs), > > }; > > > > -static int __init coproc_a7_init(void) > > +static int __init coproc_generic_init(void) > > { > > - kvm_register_target_coproc_table(&a7_target_table); > > + kvm_register_target_coproc_table(&generic_target_table); > > return 0; > > } > > -late_initcall(coproc_a7_init); > > +late_initcall(coproc_generic_init); > > diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c > > index 684cf64b4033..d33a24e70f49 100644 > > --- a/arch/arm/kvm/guest.c > > +++ b/arch/arm/kvm/guest.c > > @@ -275,12 +275,10 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, > > int __attribute_const__ kvm_target_cpu(void) > > { > > switch (read_cpuid_part()) { > > - case ARM_CPU_PART_CORTEX_A7: > > - return KVM_ARM_TARGET_CORTEX_A7; > > case ARM_CPU_PART_CORTEX_A15: > > return KVM_ARM_TARGET_CORTEX_A15; > > default: > > - return -EINVAL; > > + return KVM_ARM_TARGET_GENERIC_V7; > > } > > } > > > > diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c > > index eb4174f6ebbd..d6e07500bab4 100644 > > --- a/arch/arm/kvm/reset.c > > +++ b/arch/arm/kvm/reset.c > > @@ -43,13 +43,10 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) > > struct kvm_regs *reset_regs; > > > > switch (vcpu->arch.target) { > > - case KVM_ARM_TARGET_CORTEX_A7: > > - case KVM_ARM_TARGET_CORTEX_A15: > > + default: > > reset_regs = &cortexa_regs_reset; > > vcpu->arch.midr = read_cpuid_id(); > > break; > > - default: > > - return -ENODEV; > > } > > > > /* Reset core registers */ > > -- > > 2.16.4 > > > > Any comments on this one now? Vladimir, you had some concerns in the other > thread. I'm not sure if I got them correctly, if they apply here. > The concern was, if we try to model a versatile express as a generic v7, the guest may end up poking a register which doesn't exist or behave as expected on the underlying CPU and generate some kind of exception. However, I can't see this hurting existing configurations or the host, so I think this patch looks fine, and we can fix issues as we progress. Although, I second Marc in that we should be removing the 32-bit KVM support to lighten maintenance, and have a way to run a 64-bit kernel on the RPi4. Of course, if we hear about *actual users* of the 32-bit KVM, then we can reconsider. Thanks, Christoffer
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index 4602464ebdfb..e0c5bbec3d3d 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -70,6 +70,7 @@ struct kvm_regs { /* Supported Processor Types */ #define KVM_ARM_TARGET_CORTEX_A15 0 #define KVM_ARM_TARGET_CORTEX_A7 1 +#define KVM_ARM_TARGET_GENERIC_V7 KVM_ARM_TARGET_CORTEX_A7 #define KVM_ARM_NUM_TARGETS 2 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 531e59f5be9c..d959f89135d6 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += handle_exit.o guest.o emulate.o reset.o -obj-y += coproc.o coproc_a15.o coproc_a7.o vgic-v3-coproc.o +obj-y += coproc.o coproc_a15.o coproc_generic.o vgic-v3-coproc.o obj-y += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o obj-y += $(KVM)/arm/psci.o $(KVM)/arm/perf.o obj-y += $(KVM)/arm/aarch32.o diff --git a/arch/arm/kvm/coproc_a7.c b/arch/arm/kvm/coproc_generic.c similarity index 70% rename from arch/arm/kvm/coproc_a7.c rename to arch/arm/kvm/coproc_generic.c index 40f643e1e05c..b32a541ad7bf 100644 --- a/arch/arm/kvm/coproc_a7.c +++ b/arch/arm/kvm/coproc_generic.c @@ -15,28 +15,28 @@ #include "coproc.h" /* - * Cortex-A7 specific CP15 registers. + * Generic CP15 registers. * CRn denotes the primary register number, but is copied to the CRm in the * user space API for 64-bit register access in line with the terminology used * in the ARM ARM. * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit * registers preceding 32-bit ones. */ -static const struct coproc_reg a7_regs[] = { +static const struct coproc_reg generic_regs[] = { /* SCTLR: swapped by interrupt.S. */ { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32, access_vm_reg, reset_val, c1_SCTLR, 0x00C50878 }, }; -static struct kvm_coproc_target_table a7_target_table = { - .target = KVM_ARM_TARGET_CORTEX_A7, - .table = a7_regs, - .num = ARRAY_SIZE(a7_regs), +static struct kvm_coproc_target_table generic_target_table = { + .target = KVM_ARM_TARGET_GENERIC_V7, + .table = generic_regs, + .num = ARRAY_SIZE(generic_regs), }; -static int __init coproc_a7_init(void) +static int __init coproc_generic_init(void) { - kvm_register_target_coproc_table(&a7_target_table); + kvm_register_target_coproc_table(&generic_target_table); return 0; } -late_initcall(coproc_a7_init); +late_initcall(coproc_generic_init); diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 684cf64b4033..d33a24e70f49 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -275,12 +275,10 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, int __attribute_const__ kvm_target_cpu(void) { switch (read_cpuid_part()) { - case ARM_CPU_PART_CORTEX_A7: - return KVM_ARM_TARGET_CORTEX_A7; case ARM_CPU_PART_CORTEX_A15: return KVM_ARM_TARGET_CORTEX_A15; default: - return -EINVAL; + return KVM_ARM_TARGET_GENERIC_V7; } } diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index eb4174f6ebbd..d6e07500bab4 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -43,13 +43,10 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) struct kvm_regs *reset_regs; switch (vcpu->arch.target) { - case KVM_ARM_TARGET_CORTEX_A7: - case KVM_ARM_TARGET_CORTEX_A15: + default: reset_regs = &cortexa_regs_reset; vcpu->arch.midr = read_cpuid_id(); break; - default: - return -ENODEV; } /* Reset core registers */