@@ -51,7 +51,7 @@ ACPI_MODULE_NAME("tbfadt")
/* Local prototypes */
static inline void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 byte_width, u64 address);
+ u8 space_id, u8 byte_width, u64 address);
static void acpi_tb_convert_fadt(void);
@@ -125,7 +125,7 @@ static struct acpi_fadt_info fadt_info_table[] = {
static inline void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 byte_width, u64 address)
+ u8 space_id, u8 byte_width, u64 address)
{
/*
@@ -136,10 +136,10 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
/* All other fields are byte-wide */
- generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
- generic_address->bit_width = byte_width << 3;
+ generic_address->space_id = space_id;
+ generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
generic_address->bit_offset = 0;
- generic_address->access_width = 0;
+ generic_address->access_width = 0; /* Access width ANY */
}
/*******************************************************************************
@@ -226,7 +226,8 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
*/
if (length > sizeof(struct acpi_table_fadt)) {
ACPI_WARNING((AE_INFO,
- "FADT (revision %u) is longer than ACPI 2.0 version, truncating length 0x%X to 0x%zX",
+ "FADT (revision %u) is longer than ACPI 2.0 version, "
+ "truncating length 0x%X to 0x%zX",
table->revision, (unsigned)length,
sizeof(struct acpi_table_fadt)));
}
@@ -245,7 +246,6 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* 2) Validate some of the important values within the FADT
*/
acpi_tb_convert_fadt();
- acpi_tb_validate_fadt();
}
/*******************************************************************************
@@ -337,7 +337,11 @@ static void acpi_tb_convert_fadt(void)
/* Expand only if the X target is null */
if (!target->address) {
+
+ /* The space_id is always I/O for the legacy address fields */
+
acpi_tb_init_generic_address(target,
+ ACPI_ADR_SPACE_SYSTEM_IO,
*ACPI_ADD_PTR(u8,
&acpi_gbl_FADT,
fadt_info_table
@@ -350,6 +354,25 @@ static void acpi_tb_convert_fadt(void)
}
}
+ /* Validate FADT values now, before we make any changes */
+
+ acpi_tb_validate_fadt();
+
+ /*
+ * Get the length of the individual PM1 registers. Each register is
+ * defined to be the event block length / 2.
+ */
+ pm1_register_length = (u8)ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
+
+ /*
+ * Adjust the lengths of the PM1 Event Blocks so that they can be used to
+ * access the PM1 status register(s).
+ */
+ acpi_gbl_FADT.xpm1a_event_block.bit_width =
+ (u8)ACPI_MUL_8(pm1_register_length);
+ acpi_gbl_FADT.xpm1b_event_block.bit_width =
+ (u8)ACPI_MUL_8(pm1_register_length);
+
/*
* Calculate separate GAS structs for the PM1 Enable registers.
* These addresses do not appear (directly) in the FADT, so it is
@@ -370,11 +393,11 @@ static void acpi_tb_convert_fadt(void)
" PM1_EVT_LEN (%u)\n",
acpi_gbl_FADT.xpm1a_event_block.bit_width,
acpi_gbl_FADT.pm1_event_length);
- pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
/* The PM1A register block is required */
acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
+ acpi_gbl_FADT.xpm1a_event_block.space_id,
pm1_register_length,
(acpi_gbl_FADT.xpm1a_event_block.address +
pm1_register_length));
@@ -393,6 +416,7 @@ static void acpi_tb_convert_fadt(void)
acpi_gbl_FADT.xpm1b_event_block.bit_width,
acpi_gbl_FADT.pm1_event_length);
acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
+ acpi_gbl_FADT.xpm1b_event_block.space_id,
pm1_register_length,
(acpi_gbl_FADT.xpm1b_event_block.
address + pm1_register_length));
@@ -401,6 +425,30 @@ static void acpi_tb_convert_fadt(void)
acpi_gbl_FADT.xpm1b_event_block.space_id;
}
+
+ if (acpi_gbl_use_default_register_widths) {
+ /*
+ * Optionally, use the default sizes for the ACPI registers.
+ * Some FADTs do not have the correct length(s).
+ *
+ * Note: Xpm1a_event_block and Xpm1b_event_block are used to access the PM1
+ * status registers. The PM1 enable registers are created above.
+ */
+ acpi_gbl_xpm1a_enable.bit_width = ACPI_PM1_REGISTER_WIDTH;
+ acpi_gbl_xpm1b_enable.bit_width = ACPI_PM1_REGISTER_WIDTH;
+
+ acpi_gbl_FADT.xpm1a_event_block.bit_width =
+ ACPI_PM1_REGISTER_WIDTH;
+ acpi_gbl_FADT.xpm1b_event_block.bit_width =
+ ACPI_PM1_REGISTER_WIDTH;
+ acpi_gbl_FADT.xpm1a_control_block.bit_width =
+ ACPI_PM1_REGISTER_WIDTH;
+ acpi_gbl_FADT.xpm1b_control_block.bit_width =
+ ACPI_PM1_REGISTER_WIDTH;
+ acpi_gbl_FADT.xpm2_control_block.bit_width =
+ ACPI_PM2_REGISTER_WIDTH;
+ acpi_gbl_FADT.xpm_timer_block.bit_width = ACPI_PM_TIMER_WIDTH;
+ }
}
/******************************************************************************
@@ -425,26 +473,63 @@ static void acpi_tb_convert_fadt(void)
static void acpi_tb_validate_fadt(void)
{
+ char *name;
u32 *address32;
struct acpi_generic_address *address64;
u8 length;
u32 i;
- /* Examine all of the 64-bit extended address fields (X fields) */
+ /*
+ * Check for FACS and DSDT address mismatches. An address mismatch between
+ * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
+ * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
+ */
+ if (acpi_gbl_FADT.facs &&
+ (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64 FACS address mismatch in FADT - "
+ "two FACS tables! %8.8X/%8.8X%8.8X",
+ acpi_gbl_FADT.facs,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+ }
- for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ if (acpi_gbl_FADT.dsdt &&
+ (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
+ ACPI_WARNING((AE_INFO,
+ "32/64 DSDT address mismatch in FADT - "
+ "two DSDT tables! %8.8X/%8.8X%8.8X",
+ acpi_gbl_FADT.dsdt,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+ }
- /* Generate pointers to the 32-bit and 64-bit addresses and get the length */
+ /* Examine all of the 64-bit extended address fields (X fields) */
- address64 =
- ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
- fadt_info_table[i].target);
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ /*
+ * Generate pointers to the 32-bit and 64-bit addresses, get the
+ * register length (width), and the register name
+ */
+ address64 = ACPI_ADD_PTR(struct acpi_generic_address,
+ &acpi_gbl_FADT,
+ fadt_info_table[i].target);
address32 =
ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
fadt_info_table[i].source);
length =
*ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
fadt_info_table[i].length);
+ name = fadt_info_table[i].name;
+
+ /*
+ * For each extended field, check for length mismatch between the
+ * legacy length field and the corresonding 64-bit X length field.
+ */
+ if (address64 && (address64->bit_width != ACPI_MUL_8(length))) {
+ ACPI_WARNING((AE_INFO,
+ "32/64X bit length mismatch in %s: %d/%d",
+ name, ACPI_MUL_8(length),
+ address64->bit_width));
+ }
if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
/*
@@ -453,8 +538,8 @@ static void acpi_tb_validate_fadt(void)
*/
if (!address64->address || !length) {
ACPI_ERROR((AE_INFO,
- "Required field \"%s\" has zero address and/or length: %8.8X%8.8X/%X",
- fadt_info_table[i].name,
+ "Required field %s has zero address and/or length: %8.8X%8.8X/%X",
+ name,
ACPI_FORMAT_UINT64(address64->
address),
length));
@@ -467,8 +552,8 @@ static void acpi_tb_validate_fadt(void)
if ((address64->address && !length)
|| (!address64->address && length)) {
ACPI_WARNING((AE_INFO,
- "Optional field \"%s\" has zero address or length: %8.8X%8.8X/%X",
- fadt_info_table[i].name,
+ "Optional field %s has zero address or length: %8.8X%8.8X/%X",
+ name,
ACPI_FORMAT_UINT64(address64->
address),
length));
@@ -480,8 +565,8 @@ static void acpi_tb_validate_fadt(void)
if (address64->address && *address32 &&
(address64->address != (u64) * address32)) {
ACPI_ERROR((AE_INFO,
- "32/64X address mismatch in \"%s\": [%8.8X] [%8.8X%8.8X], using 64X",
- fadt_info_table[i].name, *address32,
+ "32/64X address mismatch in %s: [%8.8X] [%8.8X%8.8X], using 64X",
+ name, *address32,
ACPI_FORMAT_UINT64(address64->address)));
}
}
@@ -102,6 +102,12 @@ ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
*/
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
+/*
+ * Optionally use default values for the ACPI register widths. Set this to
+ * TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
+ */
+ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, FALSE);
+
/*****************************************************************************
*
* Debug support
@@ -309,10 +309,16 @@ typedef u32 acpi_physical_address;
*
*****************************************************************************/
-/* Number of distinct GPE register blocks and register width */
+/* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */
#define ACPI_MAX_GPE_BLOCKS 2
+
+/* Default ACPI register widths */
+
#define ACPI_GPE_REGISTER_WIDTH 8
+#define ACPI_PM1_REGISTER_WIDTH 16
+#define ACPI_PM2_REGISTER_WIDTH 8
+#define ACPI_PM_TIMER_WIDTH 32
/* Names within the namespace are 4 bytes long */