diff mbox

[17/30] ACPI: Skip the first two elements in the _BCL package

Message ID 0a3db1cec5d476804185114ff5d1845aed3936b3.1233988825.git.len.brown@intel.com (mailing list archive)
State Accepted
Headers show

Commit Message

Len Brown Feb. 7, 2009, 6:41 a.m. UTC 
From: Zhao Yakui <yakui.zhao@intel.com>

According to the Spec the first two elements in the _BCL package won't be

regarded as the available brightness level. The first is the brightness when
full power is connected to the box(It means that the AC adapter is plugged).
The second is the brightness level when the box is on battery.
    If the first two elements are still used while finding the next brightness
level, it will fall back to the lowest level when keeping on pressing
hotkey. (On some boxes the brightness will be changed twice when hotkey is
pressed once. One is in the ACPI video driver. The other is changed by sys I/F.
In the ACPI video driver the first two elements will be used while changing
the brightness. But the first two elements is skipped while using sys I/F.
In such case there exists the inconsistency).
    So he first two elements had better be skipped while showing the available
brightness or finding the next brightness level.

http://bugzilla.kernel.org/show_bug.cgi?id=12450

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index f261737..c9bfca0 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1020,7 +1020,7 @@  acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset)
 	}
 
 	seq_printf(seq, "levels: ");
-	for (i = 0; i < dev->brightness->count; i++)
+	for (i = 2; i < dev->brightness->count; i++)
 		seq_printf(seq, " %d", dev->brightness->levels[i]);
 	seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr);
 
@@ -1059,7 +1059,7 @@  acpi_video_device_write_brightness(struct file *file,
 		return -EFAULT;
 
 	/* validate through the list of available levels */
-	for (i = 0; i < dev->brightness->count; i++)
+	for (i = 2; i < dev->brightness->count; i++)
 		if (level == dev->brightness->levels[i]) {
 			if (ACPI_SUCCESS
 			    (acpi_video_device_lcd_set_level(dev, level)))
@@ -1712,7 +1712,7 @@  acpi_video_get_next_level(struct acpi_video_device *device,
 	max = max_below = 0;
 	min = min_above = 255;
 	/* Find closest level to level_current */
-	for (i = 0; i < device->brightness->count; i++) {
+	for (i = 2; i < device->brightness->count; i++) {
 		l = device->brightness->levels[i];
 		if (abs(l - level_current) < abs(delta)) {
 			delta = l - level_current;
@@ -1722,7 +1722,7 @@  acpi_video_get_next_level(struct acpi_video_device *device,
 	}
 	/* Ajust level_current to closest available level */
 	level_current += delta;
-	for (i = 0; i < device->brightness->count; i++) {
+	for (i = 2; i < device->brightness->count; i++) {
 		l = device->brightness->levels[i];
 		if (l < min)
 			min = l;