| Message ID | 1346622458-30595-2-git-send-email-yinghai@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 13b2eaf..7cee8db 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -631,6 +631,8 @@ int pciehp_power_off_slot(struct slot * slot) slot_cmd = POWER_OFF; cmd_mask = PCI_EXP_SLTCTL_PCC; retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask); + /* need to enable link again for present bit report */ + pciehp_link_enable(ctrl); if (retval) { ctrl_err(ctrl, "Write command failed!\n"); return retval;
During debugging hotplug surpise support, found slot status reg does not report present status anymore after removing the card. That present bit does not get cleared even that card is removed. So no interrupt is generated later after reinsert the card. That problem is caused by commit: | commit 2debd9289997fc5d1c0043b41201a8b40d5e11d0 | | PCI: pciehp: Disable/enable link during slot power off/on Try turn on link after power off. With the fix present bit will report correctly, also still avoid the aer during the power off. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: stable@vger.kernel.org --- drivers/pci/hotplug/pciehp_hpc.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)