| Message ID | 1449625686-5594-6-git-send-email-Suravee.Suthikulpanit@amd.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Tue, 8 Dec 2015 17:48:06 -0800 Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> wrote: > This patch introduces gicv2m_acpi_init(), which uses information > in MADT GIC MSI frames structure to initialize GICv2m driver. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> > --- > drivers/irqchip/irq-gic-v2m.c | 95 +++++++++++++++++++++++++++++++++++++++++ > drivers/irqchip/irq-gic.c | 3 ++ > include/linux/irqchip/arm-gic.h | 4 ++ > 3 files changed, 102 insertions(+) > > diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c > index 7e60f7e..4f52e9a 100644 > --- a/drivers/irqchip/irq-gic-v2m.c > +++ b/drivers/irqchip/irq-gic-v2m.c > @@ -15,9 +15,11 @@ > > #define pr_fmt(fmt) "GICv2m: " fmt > > +#include <linux/acpi.h> > #include <linux/irq.h> > #include <linux/irqdomain.h> > #include <linux/kernel.h> > +#include <linux/msi.h> > #include <linux/of_address.h> > #include <linux/of_pci.h> > #include <linux/slab.h> > @@ -138,6 +140,11 @@ static int gicv2m_irq_gic_domain_alloc(struct irq_domain *domain, > fwspec.param[0] = 0; > fwspec.param[1] = hwirq - 32; > fwspec.param[2] = IRQ_TYPE_EDGE_RISING; > + } else if (is_fwnode_irqchip(domain->parent->fwnode)) { > + fwspec.fwnode = domain->parent->fwnode; > + fwspec.param_count = 2; > + fwspec.param[0] = hwirq; > + fwspec.param[1] = IRQ_TYPE_EDGE_RISING; > } else { > return -EINVAL; > } > @@ -255,6 +262,8 @@ static void gicv2m_teardown(void) > kfree(v2m->bm); > iounmap(v2m->base); > of_node_put(to_of_node(v2m->fwnode)); > + if (is_fwnode_irqchip(v2m->fwnode)) > + irq_domain_free_fwnode(v2m->fwnode); > kfree(v2m); > } > } > @@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode, > > if (to_of_node(fwnode)) > name = to_of_node(fwnode)->name; > + else > + name = irq_domain_get_irqchip_fwnode_name(fwnode); Don't bother with that, the name associated with the domain is absolutely meaningless. You are already printing the frame address, which is enough to identify it, should someone need to debug this. Drop the name from the previous patch as well, and that will make one less difference to care about. Patch #3 can die as well. > > pr_info("Frame %s: range[%#lx:%#lx], SPI[%d:%d]\n", name, > (unsigned long)res->start, (unsigned long)res->end, > @@ -415,3 +426,87 @@ int __init gicv2m_of_init(struct device_node *node, struct irq_domain *parent) > gicv2m_teardown(); > return ret; > } > + > +#ifdef CONFIG_ACPI > +static int acpi_num_msi; > + > +static struct fwnode_handle *gicv2m_get_fwnode(struct device *dev) > +{ > + struct v2m_data *data; > + > + if (WARN_ON(acpi_num_msi <= 0)) > + return NULL; > + > + /* We only return the fwnode of the first MSI frame. */ > + data = list_first_entry_or_null(&v2m_nodes, struct v2m_data, entry); > + if (!data) > + return NULL; > + > + return data->fwnode; > +} > + > +static int __init > +acpi_parse_madt_msi(struct acpi_subtable_header *header, > + const unsigned long end) > +{ > + int ret; > + struct resource res; > + u32 spi_start = 0, nr_spis = 0; > + struct acpi_madt_generic_msi_frame *m; > + struct fwnode_handle *fwnode = NULL; You shouldn't need to initialize this to NULL. > + > + m = (struct acpi_madt_generic_msi_frame *)header; > + if (BAD_MADT_ENTRY(m, end)) > + return -EINVAL; > + > + res.start = m->base_address; > + res.end = m->base_address + 0x1000; SZ_4K? > + > + if (m->flags & ACPI_MADT_OVERRIDE_SPI_VALUES) { > + spi_start = m->spi_base; > + nr_spis = m->spi_count; > + > + pr_info("ACPI overriding V2M MSI_TYPER (base:%u, num:%u)\n", > + spi_start, nr_spis); > + } > + > + fwnode = irq_domain_alloc_fwnode((void *)m->base_address); > + if (!fwnode) { > + pr_err("Unable to allocate GICv2m domain token\n"); > + return -EINVAL; > + } > + > + ret = gicv2m_init_one(fwnode, spi_start, nr_spis, &res); > + if (ret) > + irq_domain_free_fwnode(fwnode); > + > + return ret; > +} > + > +int __init gicv2m_acpi_init(struct irq_domain *parent) > +{ > + int ret; > + > + if (acpi_num_msi > 0) > + return 0; > + > + acpi_num_msi = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_MSI_FRAME, > + acpi_parse_madt_msi, 0); > + > + if (acpi_num_msi <= 0) > + goto err_out; > + > + ret = gicv2m_allocate_domains(parent); > + if (ret) > + goto err_out; > + > + pci_msi_register_fwnode_provider(&gicv2m_get_fwnode); > + > + return 0; > + > +err_out: > + gicv2m_teardown(); > + return -EINVAL; > +} > + > +#endif /* CONFIG_ACPI */ > diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c > index fcd327f..e4463f7 100644 > --- a/drivers/irqchip/irq-gic.c > +++ b/drivers/irqchip/irq-gic.c > @@ -1358,6 +1358,9 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header, > > __gic_init_bases(0, -1, dist_base, cpu_base, 0, domain_handle); > > + if (IS_ENABLED(CONFIG_ARM_GIC_V2M)) > + gicv2m_acpi_init(gic_data[0].domain); > + Please move this after the next line. It makes more sense to finish the initialization of the basic GIC before starting to probe other things. > acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); > return 0; > } > diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h > index bae69e5..30b2ccb 100644 > --- a/include/linux/irqchip/arm-gic.h > +++ b/include/linux/irqchip/arm-gic.h > @@ -108,6 +108,10 @@ void gic_init(unsigned int nr, int start, > > int gicv2m_of_init(struct device_node *node, struct irq_domain *parent); > > +#ifdef CONFIG_ACPI > +int gicv2m_acpi_init(struct irq_domain *parent); > +#endif > + How about having a single: int gicv2m_init(struct fwnode_handle *parent_handle, struct irq_domain *parent_domain); which in turn calls either gicv2m_of_init or gicv2m_acpi_init? Saves some #ifdef, and avoids another entry point. > void gic_send_sgi(unsigned int cpu_id, unsigned int irq); > int gic_get_cpu_id(unsigned int cpu); > void gic_migrate_target(unsigned int new_cpu_id); Otherwise, this looks good. Thanks, M.
Hi Marc, On 12/9/2015 4:38 AM, Marc Zyngier wrote: > On Tue, 8 Dec 2015 17:48:06 -0800 > Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> wrote: > >> This patch introduces gicv2m_acpi_init(), which uses information >> in MADT GIC MSI frames structure to initialize GICv2m driver. >> >> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >> --- >> drivers/irqchip/irq-gic-v2m.c | 95 +++++++++++++++++++++++++++++++++++++++++ >> drivers/irqchip/irq-gic.c | 3 ++ >> include/linux/irqchip/arm-gic.h | 4 ++ >> 3 files changed, 102 insertions(+) >> >> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c >> [...] >> @@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode, >> >> if (to_of_node(fwnode)) >> name = to_of_node(fwnode)->name; >> + else >> + name = irq_domain_get_irqchip_fwnode_name(fwnode); > > Don't bother with that, the name associated with the domain is > absolutely meaningless. You are already printing the frame address, > which is enough to identify it, should someone need to debug this. > > Drop the name from the previous patch as well, and that will make one > less difference to care about. Patch #3 can die as well. > Ok. I'll just leave them blank (i.e. const char *name ="") >> [...] >> diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h >> index bae69e5..30b2ccb 100644 >> --- a/include/linux/irqchip/arm-gic.h >> +++ b/include/linux/irqchip/arm-gic.h >> @@ -108,6 +108,10 @@ void gic_init(unsigned int nr, int start, >> >> int gicv2m_of_init(struct device_node *node, struct irq_domain *parent); >> >> +#ifdef CONFIG_ACPI >> +int gicv2m_acpi_init(struct irq_domain *parent); >> +#endif >> + > > How about having a single: > > int gicv2m_init(struct fwnode_handle *parent_handle, > struct irq_domain *parent_domain); > > which in turn calls either gicv2m_of_init or gicv2m_acpi_init? Saves > some #ifdef, and avoids another entry point. Sounds good. I'll take care of this. >> void gic_send_sgi(unsigned int cpu_id, unsigned int irq); >> int gic_get_cpu_id(unsigned int cpu); >> void gic_migrate_target(unsigned int new_cpu_id); > > Otherwise, this looks good. > > Thanks, > > M. > Thanks. Sending out v6 in a little bit. Suravee -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/12/15 18:02, Suravee Suthikulanit wrote: > Hi Marc, > > On 12/9/2015 4:38 AM, Marc Zyngier wrote: >> On Tue, 8 Dec 2015 17:48:06 -0800 >> Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> wrote: >> >>> This patch introduces gicv2m_acpi_init(), which uses information >>> in MADT GIC MSI frames structure to initialize GICv2m driver. >>> >>> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >>> --- >>> drivers/irqchip/irq-gic-v2m.c | 95 +++++++++++++++++++++++++++++++++++++++++ >>> drivers/irqchip/irq-gic.c | 3 ++ >>> include/linux/irqchip/arm-gic.h | 4 ++ >>> 3 files changed, 102 insertions(+) >>> >>> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c >>> [...] >>> @@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode, >>> >>> if (to_of_node(fwnode)) >>> name = to_of_node(fwnode)->name; >>> + else >>> + name = irq_domain_get_irqchip_fwnode_name(fwnode); >> >> Don't bother with that, the name associated with the domain is >> absolutely meaningless. You are already printing the frame address, >> which is enough to identify it, should someone need to debug this. >> >> Drop the name from the previous patch as well, and that will make one >> less difference to care about. Patch #3 can die as well. >> > > Ok. I'll just leave them blank (i.e. const char *name ="") No, just remove name altogether. Nobody reads that anyway, and if they want to find out, there is the address that's clear enough. Thanks, M.
On 12/9/2015 12:16 PM, Marc Zyngier wrote: >>>> diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c >>>> >>>[...] >>>> >>>@@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode, >>>> >>> >>>> >>> if (to_of_node(fwnode)) >>>> >>> name = to_of_node(fwnode)->name; >>>> >>>+ else >>>> >>>+ name = irq_domain_get_irqchip_fwnode_name(fwnode); >>> >> >>> >>Don't bother with that, the name associated with the domain is >>> >>absolutely meaningless. You are already printing the frame address, >>> >>which is enough to identify it, should someone need to debug this. >>> >> >>> >>Drop the name from the previous patch as well, and that will make one >>> >>less difference to care about. Patch #3 can die as well. >>> >> >> > >> >Ok. I'll just leave them blank (i.e. const char *name ="") > No, just remove name altogether. Nobody reads that anyway, and if they > want to find out, there is the address that's clear enough. > > Thanks, > > M. Ok. Suravee -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/irqchip/irq-gic-v2m.c b/drivers/irqchip/irq-gic-v2m.c index 7e60f7e..4f52e9a 100644 --- a/drivers/irqchip/irq-gic-v2m.c +++ b/drivers/irqchip/irq-gic-v2m.c @@ -15,9 +15,11 @@ #define pr_fmt(fmt) "GICv2m: " fmt +#include <linux/acpi.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/kernel.h> +#include <linux/msi.h> #include <linux/of_address.h> #include <linux/of_pci.h> #include <linux/slab.h> @@ -138,6 +140,11 @@ static int gicv2m_irq_gic_domain_alloc(struct irq_domain *domain, fwspec.param[0] = 0; fwspec.param[1] = hwirq - 32; fwspec.param[2] = IRQ_TYPE_EDGE_RISING; + } else if (is_fwnode_irqchip(domain->parent->fwnode)) { + fwspec.fwnode = domain->parent->fwnode; + fwspec.param_count = 2; + fwspec.param[0] = hwirq; + fwspec.param[1] = IRQ_TYPE_EDGE_RISING; } else { return -EINVAL; } @@ -255,6 +262,8 @@ static void gicv2m_teardown(void) kfree(v2m->bm); iounmap(v2m->base); of_node_put(to_of_node(v2m->fwnode)); + if (is_fwnode_irqchip(v2m->fwnode)) + irq_domain_free_fwnode(v2m->fwnode); kfree(v2m); } } @@ -359,6 +368,8 @@ static int __init gicv2m_init_one(struct fwnode_handle *fwnode, if (to_of_node(fwnode)) name = to_of_node(fwnode)->name; + else + name = irq_domain_get_irqchip_fwnode_name(fwnode); pr_info("Frame %s: range[%#lx:%#lx], SPI[%d:%d]\n", name, (unsigned long)res->start, (unsigned long)res->end, @@ -415,3 +426,87 @@ int __init gicv2m_of_init(struct device_node *node, struct irq_domain *parent) gicv2m_teardown(); return ret; } + +#ifdef CONFIG_ACPI +static int acpi_num_msi; + +static struct fwnode_handle *gicv2m_get_fwnode(struct device *dev) +{ + struct v2m_data *data; + + if (WARN_ON(acpi_num_msi <= 0)) + return NULL; + + /* We only return the fwnode of the first MSI frame. */ + data = list_first_entry_or_null(&v2m_nodes, struct v2m_data, entry); + if (!data) + return NULL; + + return data->fwnode; +} + +static int __init +acpi_parse_madt_msi(struct acpi_subtable_header *header, + const unsigned long end) +{ + int ret; + struct resource res; + u32 spi_start = 0, nr_spis = 0; + struct acpi_madt_generic_msi_frame *m; + struct fwnode_handle *fwnode = NULL; + + m = (struct acpi_madt_generic_msi_frame *)header; + if (BAD_MADT_ENTRY(m, end)) + return -EINVAL; + + res.start = m->base_address; + res.end = m->base_address + 0x1000; + + if (m->flags & ACPI_MADT_OVERRIDE_SPI_VALUES) { + spi_start = m->spi_base; + nr_spis = m->spi_count; + + pr_info("ACPI overriding V2M MSI_TYPER (base:%u, num:%u)\n", + spi_start, nr_spis); + } + + fwnode = irq_domain_alloc_fwnode((void *)m->base_address); + if (!fwnode) { + pr_err("Unable to allocate GICv2m domain token\n"); + return -EINVAL; + } + + ret = gicv2m_init_one(fwnode, spi_start, nr_spis, &res); + if (ret) + irq_domain_free_fwnode(fwnode); + + return ret; +} + +int __init gicv2m_acpi_init(struct irq_domain *parent) +{ + int ret; + + if (acpi_num_msi > 0) + return 0; + + acpi_num_msi = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_MSI_FRAME, + acpi_parse_madt_msi, 0); + + if (acpi_num_msi <= 0) + goto err_out; + + ret = gicv2m_allocate_domains(parent); + if (ret) + goto err_out; + + pci_msi_register_fwnode_provider(&gicv2m_get_fwnode); + + return 0; + +err_out: + gicv2m_teardown(); + return -EINVAL; +} + +#endif /* CONFIG_ACPI */ diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index fcd327f..e4463f7 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -1358,6 +1358,9 @@ static int __init gic_v2_acpi_init(struct acpi_subtable_header *header, __gic_init_bases(0, -1, dist_base, cpu_base, 0, domain_handle); + if (IS_ENABLED(CONFIG_ARM_GIC_V2M)) + gicv2m_acpi_init(gic_data[0].domain); + acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); return 0; } diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index bae69e5..30b2ccb 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -108,6 +108,10 @@ void gic_init(unsigned int nr, int start, int gicv2m_of_init(struct device_node *node, struct irq_domain *parent); +#ifdef CONFIG_ACPI +int gicv2m_acpi_init(struct irq_domain *parent); +#endif + void gic_send_sgi(unsigned int cpu_id, unsigned int irq); int gic_get_cpu_id(unsigned int cpu); void gic_migrate_target(unsigned int new_cpu_id);