| Message ID | 1498799109.2520.15.camel@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi Rui, 2017-06-30 7:05 GMT+02:00 Zhang Rui <rui.zhang@intel.com>: > On Thu, 2017-06-29 at 18:50 +0200, Enric Balletbo i Serra wrote: >> Under each thermal zone there is a optional file called "mode". >> Writing >> enabled or disabled to this file allows a given thermal zone to be >> enabled >> or disabled, but in current code, the monitoring queue doesn't stops. >> Add >> the code to disable polling when disabling thermal zone and enable >> polling >> when enabling the thermal zone. >> >> This patch is based on the original Sameer Nanda <snanda@chromium.org >> > >> patch that implemented this idea for the ACPI thermal driver. >> > > Before these two patches, only platform thermal driver cares about > "mode", thermal core does nothing but invokes platform .set_mode() > callback upon sysfs I/F write. > But after this patch set, "mode" becomes something that we should > take into account in thermal core as well. > Thus, IMO, we have a couple of things more to do, like the prototype > patch attached, which I have not tested yet. > > From 8bf51fe65bd386b7e8c3c2ca8b9f7d321c92b22f Mon Sep 17 00:00:00 2001 > From: Zhang Rui <rui.zhang@intel.com> > Date: Fri, 30 Jun 2017 11:11:45 +0800 > Subject: [RFC PATCH] Thermal: introduce thermal zone device mode control > > Thermal "mode" sysfs attribute is introduced to enable/disable a thermal zone, > and .get_mode()/.set_mode() callback is introduced for platform thermal driver > to enable/disable the hardware thermal control logic. And thermal core takes > no action upon thermal zone enable/disable. > > Actually, this is not quite right because thermal core still pokes those > disabled thermal zones occasionally, e.g. upon system resume. > > To fix this, a new flag 'mode' is introduced in struct thermal_zone_device > to represent the thermal zone mode, and several decisions have been made > based on this flag, including > 1. check the thermal zone mode right after it's registered. > 2. skip updating thermal zone if the zone is disabled > 3. stop the polling timer when the thermal zone is disabled > > Note: basically, this patch doesn't affect the existing always-enabled > thermal zones much, with just one exception - > thermal zone .get_mode() must be well prepared to reflect the real thermal > zone status upon the thermal zone registration. > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > --- > drivers/thermal/thermal_core.c | 37 +++++++++++++++++++++++++++++++++++-- > drivers/thermal/thermal_sysfs.c | 22 ++++++---------------- > include/linux/thermal.h | 3 +++ > 3 files changed, 44 insertions(+), 18 deletions(-) > > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index 5a51c74..89b2254 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -306,9 +306,9 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz) > { > mutex_lock(&tz->lock); > > - if (tz->passive) > + if (tz->enabled == THERMAL_DEVICE_ENABLED && tz->passive) tz->mode > thermal_zone_device_set_polling(tz, tz->passive_delay); > - else if (tz->polling_delay) > + else if (tz->enabled == THERMAL_DEVICE_ENABLED && tz->polling_delay) tz->mode > thermal_zone_device_set_polling(tz, tz->polling_delay); > else > thermal_zone_device_set_polling(tz, 0); > @@ -464,11 +464,35 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz) > pos->initialized = false; > } > > +int thermal_zone_set_mode(struct thermal_zone_device *tz, > + enum thermal_device_mode mode) > +{ > + int result; > + > + if (!tz->ops->set_mode) > + return -EPERM; > + > + result = tz->ops->set_mode(tz, mode); > + if (result) > + return result; > + > + if (tz->mode != mode) { > + tz->mode = mode; > + monitor_thermal_zone(tz); > + } > + return 0; > +} > +EXPORT_SYMBOL_GPL(thermal_zone_set_mode); > + > void thermal_zone_device_update(struct thermal_zone_device *tz, > enum thermal_notify_event event) > { > int count; > > + /* Do nothing if the thermal zone is disabled */ > + if (tz->mode == THERMAL_DEVICE_DISABLED) > + return; > + > if (atomic_read(&in_suspend)) > return; > > @@ -1287,6 +1311,15 @@ thermal_zone_device_register(const char *type, int trips, int mask, > INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check); > > thermal_zone_device_reset(tz); > + > + if (tz->ops->get_mode()) { remove the () > + enum thermal_device_mode mode; > + > + result = tz->ops->get_mode(tz, &mode); > + tz->mode = result ? THERMAL_DEVICE_ENABLED : mode; > + } else > + tz->mode = THERMAL_DEVICE_ENABLED; > + > /* Update the new thermal zone and mark it as already updated. */ > if (atomic_cmpxchg(&tz->need_update, 1, 0)) > thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); > diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c > index a694de9..95d2587 100644 > --- a/drivers/thermal/thermal_sysfs.c > +++ b/drivers/thermal/thermal_sysfs.c > @@ -51,17 +51,8 @@ static ssize_t > mode_show(struct device *dev, struct device_attribute *attr, char *buf) > { > struct thermal_zone_device *tz = to_thermal_zone(dev); > - enum thermal_device_mode mode; > - int result; > - > - if (!tz->ops->get_mode) > - return -EPERM; > > - result = tz->ops->get_mode(tz, &mode); > - if (result) > - return result; > - > - return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" > + return sprintf(buf, "%s\n", tz->mode == THERMAL_DEVICE_ENABLED ? "enabled" > : "disabled"); > } > > @@ -70,18 +61,17 @@ mode_store(struct device *dev, struct device_attribute *attr, > const char *buf, size_t count) > { > struct thermal_zone_device *tz = to_thermal_zone(dev); > + enum thermal_device_mode mode; > int result; > > - if (!tz->ops->set_mode) > - return -EPERM; > - > if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) > - result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); > + mode = THERMAL_DEVICE_ENABLED; > else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) > - result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); > + mode = THERMAL_DEVICE_DISABLED; > else > - result = -EINVAL; > + return -EINVAL; > > + result = thermal_zone_set_mode(tz, mode) > if (result) > return result; > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index dab11f9..2f427de 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -210,6 +210,7 @@ struct thermal_zone_device { > struct thermal_attr *trip_type_attrs; > struct thermal_attr *trip_hyst_attrs; > void *devdata; > + enum thermal_device_mode mode; > int trips; > unsigned long trips_disabled; /* bitmap for disabled trips */ > int passive_delay; > @@ -465,6 +466,8 @@ struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); > int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); > int thermal_zone_get_slope(struct thermal_zone_device *tz); > int thermal_zone_get_offset(struct thermal_zone_device *tz); > +int thermal_zone_set_mode(struct thermal_zone_device *tz, > + enum thermal_device_mode mode); > > int get_tz_trend(struct thermal_zone_device *, int); > struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, > -- > 2.7.4 > There are some build issues but once fixed the patch works as expected, many thanks. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Rui, do you want I send a fixed version of this patch? Or do you want to fix yourself? Best regards, Enric -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Enric, On Fri, 2017-06-30 at 10:15 +0200, Enric Balletbo Serra wrote: > Hi Rui, > > 2017-06-30 7:05 GMT+02:00 Zhang Rui <rui.zhang@intel.com>: > > > > On Thu, 2017-06-29 at 18:50 +0200, Enric Balletbo i Serra wrote: > > > > > > Under each thermal zone there is a optional file called "mode". > > > Writing > > > enabled or disabled to this file allows a given thermal zone to > > > be > > > enabled > > > or disabled, but in current code, the monitoring queue doesn't > > > stops. > > > Add > > > the code to disable polling when disabling thermal zone and > > > enable > > > polling > > > when enabling the thermal zone. > > > > > > This patch is based on the original Sameer Nanda <snanda@chromium > > > .org > > > > > > > > > > > patch that implemented this idea for the ACPI thermal driver. > > > > > Before these two patches, only platform thermal driver cares about > > "mode", thermal core does nothing but invokes platform .set_mode() > > callback upon sysfs I/F write. > > But after this patch set, "mode" becomes something that we should > > take into account in thermal core as well. > > Thus, IMO, we have a couple of things more to do, like the > > prototype > > patch attached, which I have not tested yet. > > > > From 8bf51fe65bd386b7e8c3c2ca8b9f7d321c92b22f Mon Sep 17 00:00:00 > > 2001 > > From: Zhang Rui <rui.zhang@intel.com> > > Date: Fri, 30 Jun 2017 11:11:45 +0800 > > Subject: [RFC PATCH] Thermal: introduce thermal zone device mode > > control > > > > Thermal "mode" sysfs attribute is introduced to enable/disable a > > thermal zone, > > and .get_mode()/.set_mode() callback is introduced for platform > > thermal driver > > to enable/disable the hardware thermal control logic. And thermal > > core takes > > no action upon thermal zone enable/disable. > > > > Actually, this is not quite right because thermal core still pokes > > those > > disabled thermal zones occasionally, e.g. upon system resume. > > > > To fix this, a new flag 'mode' is introduced in struct > > thermal_zone_device > > to represent the thermal zone mode, and several decisions have been > > made > > based on this flag, including > > 1. check the thermal zone mode right after it's registered. > > 2. skip updating thermal zone if the zone is disabled > > 3. stop the polling timer when the thermal zone is disabled > > > > Note: basically, this patch doesn't affect the existing always- > > enabled > > thermal zones much, with just one exception - > > thermal zone .get_mode() must be well prepared to reflect the real > > thermal > > zone status upon the thermal zone registration. > > > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > > --- > > drivers/thermal/thermal_core.c | 37 > > +++++++++++++++++++++++++++++++++++-- > > drivers/thermal/thermal_sysfs.c | 22 ++++++---------------- > > include/linux/thermal.h | 3 +++ > > 3 files changed, 44 insertions(+), 18 deletions(-) > > > > diff --git a/drivers/thermal/thermal_core.c > > b/drivers/thermal/thermal_core.c > > index 5a51c74..89b2254 100644 > > --- a/drivers/thermal/thermal_core.c > > +++ b/drivers/thermal/thermal_core.c > > @@ -306,9 +306,9 @@ static void monitor_thermal_zone(struct > > thermal_zone_device *tz) > > { > > mutex_lock(&tz->lock); > > > > - if (tz->passive) > > + if (tz->enabled == THERMAL_DEVICE_ENABLED && tz->passive) > tz->mode > > > > > thermal_zone_device_set_polling(tz, tz- > > >passive_delay); > > - else if (tz->polling_delay) > > + else if (tz->enabled == THERMAL_DEVICE_ENABLED && tz- > > >polling_delay) > tz->mode > > > > > thermal_zone_device_set_polling(tz, tz- > > >polling_delay); > > else > > thermal_zone_device_set_polling(tz, 0); > > @@ -464,11 +464,35 @@ static void thermal_zone_device_reset(struct > > thermal_zone_device *tz) > > pos->initialized = false; > > } > > > > +int thermal_zone_set_mode(struct thermal_zone_device *tz, > > + enum thermal_device_mode mode) > > +{ > > + int result; > > + > > + if (!tz->ops->set_mode) > > + return -EPERM; > > + > > + result = tz->ops->set_mode(tz, mode); > > + if (result) > > + return result; > > + > > + if (tz->mode != mode) { > > + tz->mode = mode; > > + monitor_thermal_zone(tz); > > + } > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(thermal_zone_set_mode); > > + > > void thermal_zone_device_update(struct thermal_zone_device *tz, > > enum thermal_notify_event event) > > { > > int count; > > > > + /* Do nothing if the thermal zone is disabled */ > > + if (tz->mode == THERMAL_DEVICE_DISABLED) > > + return; > > + > > if (atomic_read(&in_suspend)) > > return; > > > > @@ -1287,6 +1311,15 @@ thermal_zone_device_register(const char > > *type, int trips, int mask, > > INIT_DELAYED_WORK(&tz->poll_queue, > > thermal_zone_device_check); > > > > thermal_zone_device_reset(tz); > > + > > + if (tz->ops->get_mode()) { > remove the () > > > > > + enum thermal_device_mode mode; > > + > > + result = tz->ops->get_mode(tz, &mode); > > + tz->mode = result ? THERMAL_DEVICE_ENABLED : mode; > > + } else > > + tz->mode = THERMAL_DEVICE_ENABLED; > > + > > /* Update the new thermal zone and mark it as already > > updated. */ > > if (atomic_cmpxchg(&tz->need_update, 1, 0)) > > thermal_zone_device_update(tz, > > THERMAL_EVENT_UNSPECIFIED); > > diff --git a/drivers/thermal/thermal_sysfs.c > > b/drivers/thermal/thermal_sysfs.c > > index a694de9..95d2587 100644 > > --- a/drivers/thermal/thermal_sysfs.c > > +++ b/drivers/thermal/thermal_sysfs.c > > @@ -51,17 +51,8 @@ static ssize_t > > mode_show(struct device *dev, struct device_attribute *attr, char > > *buf) > > { > > struct thermal_zone_device *tz = to_thermal_zone(dev); > > - enum thermal_device_mode mode; > > - int result; > > - > > - if (!tz->ops->get_mode) > > - return -EPERM; > > > > - result = tz->ops->get_mode(tz, &mode); > > - if (result) > > - return result; > > - > > - return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED > > ? "enabled" > > + return sprintf(buf, "%s\n", tz->mode == > > THERMAL_DEVICE_ENABLED ? "enabled" > > : "disabled"); > > } > > > > @@ -70,18 +61,17 @@ mode_store(struct device *dev, struct > > device_attribute *attr, > > const char *buf, size_t count) > > { > > struct thermal_zone_device *tz = to_thermal_zone(dev); > > + enum thermal_device_mode mode; > > int result; > > > > - if (!tz->ops->set_mode) > > - return -EPERM; > > - > > if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) > > - result = tz->ops->set_mode(tz, > > THERMAL_DEVICE_ENABLED); > > + mode = THERMAL_DEVICE_ENABLED; > > else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) > > - result = tz->ops->set_mode(tz, > > THERMAL_DEVICE_DISABLED); > > + mode = THERMAL_DEVICE_DISABLED; > > else > > - result = -EINVAL; > > + return -EINVAL; > > > > + result = thermal_zone_set_mode(tz, mode) > > if (result) > > return result; > > > > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > > index dab11f9..2f427de 100644 > > --- a/include/linux/thermal.h > > +++ b/include/linux/thermal.h > > @@ -210,6 +210,7 @@ struct thermal_zone_device { > > struct thermal_attr *trip_type_attrs; > > struct thermal_attr *trip_hyst_attrs; > > void *devdata; > > + enum thermal_device_mode mode; > > int trips; > > unsigned long trips_disabled; /* bitmap for disabled > > trips */ > > int passive_delay; > > @@ -465,6 +466,8 @@ struct thermal_zone_device > > *thermal_zone_get_zone_by_name(const char *name); > > int thermal_zone_get_temp(struct thermal_zone_device *tz, int > > *temp); > > int thermal_zone_get_slope(struct thermal_zone_device *tz); > > int thermal_zone_get_offset(struct thermal_zone_device *tz); > > +int thermal_zone_set_mode(struct thermal_zone_device *tz, > > + enum thermal_device_mode mode); > > > > int get_tz_trend(struct thermal_zone_device *, int); > > struct thermal_instance *get_thermal_instance(struct > > thermal_zone_device *, > > -- > > 2.7.4 > > > There are some build issues but once fixed the patch works as > expected, many thanks. > > Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > > Rui, do you want I send a fixed version of this patch? Please send out a fixed version. But for this patch, I'd like to leave it in linux-next for sometime before pushing it, as it makes some functional changes. And it will be queued for 4.14 if there is no other problems. thanks, rui > Or do you want > to fix yourself? > > Best regards, > Enric -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 5a51c74..89b2254 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -306,9 +306,9 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz) { mutex_lock(&tz->lock); - if (tz->passive) + if (tz->enabled == THERMAL_DEVICE_ENABLED && tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); - else if (tz->polling_delay) + else if (tz->enabled == THERMAL_DEVICE_ENABLED && tz->polling_delay) thermal_zone_device_set_polling(tz, tz->polling_delay); else thermal_zone_device_set_polling(tz, 0); @@ -464,11 +464,35 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz) pos->initialized = false; } +int thermal_zone_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) +{ + int result; + + if (!tz->ops->set_mode) + return -EPERM; + + result = tz->ops->set_mode(tz, mode); + if (result) + return result; + + if (tz->mode != mode) { + tz->mode = mode; + monitor_thermal_zone(tz); + } + return 0; +} +EXPORT_SYMBOL_GPL(thermal_zone_set_mode); + void thermal_zone_device_update(struct thermal_zone_device *tz, enum thermal_notify_event event) { int count; + /* Do nothing if the thermal zone is disabled */ + if (tz->mode == THERMAL_DEVICE_DISABLED) + return; + if (atomic_read(&in_suspend)) return; @@ -1287,6 +1311,15 @@ thermal_zone_device_register(const char *type, int trips, int mask, INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check); thermal_zone_device_reset(tz); + + if (tz->ops->get_mode()) { + enum thermal_device_mode mode; + + result = tz->ops->get_mode(tz, &mode); + tz->mode = result ? THERMAL_DEVICE_ENABLED : mode; + } else + tz->mode = THERMAL_DEVICE_ENABLED; + /* Update the new thermal zone and mark it as already updated. */ if (atomic_cmpxchg(&tz->need_update, 1, 0)) thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index a694de9..95d2587 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -51,17 +51,8 @@ static ssize_t mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct thermal_zone_device *tz = to_thermal_zone(dev); - enum thermal_device_mode mode; - int result; - - if (!tz->ops->get_mode) - return -EPERM; - result = tz->ops->get_mode(tz, &mode); - if (result) - return result; - - return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" + return sprintf(buf, "%s\n", tz->mode == THERMAL_DEVICE_ENABLED ? "enabled" : "disabled"); } @@ -70,18 +61,17 @@ mode_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct thermal_zone_device *tz = to_thermal_zone(dev); + enum thermal_device_mode mode; int result; - if (!tz->ops->set_mode) - return -EPERM; - if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); + mode = THERMAL_DEVICE_ENABLED; else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); + mode = THERMAL_DEVICE_DISABLED; else - result = -EINVAL; + return -EINVAL; + result = thermal_zone_set_mode(tz, mode) if (result) return result; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index dab11f9..2f427de 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -210,6 +210,7 @@ struct thermal_zone_device { struct thermal_attr *trip_type_attrs; struct thermal_attr *trip_hyst_attrs; void *devdata; + enum thermal_device_mode mode; int trips; unsigned long trips_disabled; /* bitmap for disabled trips */ int passive_delay; @@ -465,6 +466,8 @@ struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); int thermal_zone_get_slope(struct thermal_zone_device *tz); int thermal_zone_get_offset(struct thermal_zone_device *tz); +int thermal_zone_set_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode); int get_tz_trend(struct thermal_zone_device *, int); struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,