| Message ID | 162295952770.1109360.877553895768113895.stgit@dwillia2-desk3.amr.corp.intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | CXL port and decoder enumeration | expand |
On Sat, 5 Jun 2021 23:05:27 -0700 Dan Williams <dan.j.williams@intel.com> wrote: > A cxl_decoder is a child of a cxl_port. It represents a hardware > decoder configuration of an upstream port to one or more of its > downstream ports. The decoder is either represented in standard HDM > decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder > Capability Structure), or it is a static decode configuration > communicated by platform firmware (see the CXL Early Discovery Table: > Fixed Memory Window Structure). > > The firmware described and hardware described decoders differ slightly > leading to 2 different sub-types of decoders, cxl_decoder_root and > cxl_decoder_switch. At the root level the decode capabilities restrict > what can be mapped beneath them. Mid-level switch decoders are > configured for either acclerator (type-2) or memory-expander (type-3) > operation, but they are otherwise agnostic to the type of memory > (volatile vs persistent) being mapped. > > Here is an example topology from a single-ported host-bridge environment > without CFMWS decodes enumerated. > > /sys/bus/cxl/devices/root0 > ├── devtype > ├── dport0 -> ../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 > ├── port1 > │ ├── decoder1.0 > │ │ ├── devtype > │ │ ├── end > │ │ ├── locked > │ │ ├── start > │ │ ├── subsystem -> ../../../../bus/cxl > │ │ ├── target_list > │ │ ├── target_type > │ │ └── uevent > │ ├── devtype > │ ├── dport0 -> ../../pci0000:34/0000:34:00.0 > │ ├── subsystem -> ../../../bus/cxl > │ ├── uevent > │ └── uport -> ../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 > ├── subsystem -> ../../bus/cxl > ├── uevent > └── uport -> ../platform/ACPI0017:00 > > Signed-off-by: Dan Williams <dan.j.williams@intel.com> One trivial docs issue and a suggestion that -2 is a bit too magic. Otherwise looks good to me. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > --- > Documentation/ABI/testing/sysfs-bus-cxl | 70 ++++++++ > drivers/cxl/acpi.c | 21 ++ > drivers/cxl/core.c | 265 +++++++++++++++++++++++++++++++ > drivers/cxl/cxl.h | 48 ++++++ > 4 files changed, 403 insertions(+), 1 deletion(-) > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > index 0cb31b7ad17b..f16f18e77578 100644 > --- a/Documentation/ABI/testing/sysfs-bus-cxl > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > @@ -48,3 +48,73 @@ Description: > decode of CXL memory resources. The 'Y' integer reflects the > hardware port unique-id used in the hardware decoder target > list. > + > +What: /sys/bus/cxl/devices/decoderX.Y > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + CXL decoder objects are enumerated from either a platform > + firmware description, or a CXL HDM decoder register set in a > + PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder > + Capability Structure). The 'X' in decoderX.Y represents the > + cxl_port container of this decoder, and 'Y' represents the > + instance id of a given decoder resource. > + > +What: /sys/bus/cxl/devices/decoderX.Y/{start,end} > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + The 'start' and 'end' attributes together convey the physical > + address base and last addressable byte of the decoder's decode > + window. For decoders of devtype "cxl_decoder_root" the address > + range is fixed. For decoders of devtype "cxl_decoder_switch" the > + address is bounded by the decode range of the cxl_port ancestor > + of the decoder's cxl_port, and dynamically updates based on the > + active memory regions in that address space. > + > +What: /sys/bus/cxl/devices/decoderX.Y/locked > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + CXL HDM decoders have the capability to lock the configuration > + until the next device reset. For decoders of devtype > + "cxl_decoder_root" there is no standard facility to unlock them. > + For decoders of devtype "cxl_decoder_switch" a secondary bus > + reset, of the PCIe bridge that provides the bus for this > + decoders uport, unlocks / resets the decoder. > + > +What: /sys/bus/cxl/devices/decoderX.Y/target_list > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + Display a comma separated list of the current decoder target > + configuration. The list is ordered by the current configured > + interleave order of the decoder's dport instances. Each entry in > + the list is a dport id. > + > +What: /sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3} > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + When a CXL decoder is of devtype "cxl_decoder_root", it > + represents a fixed memory window identified by platform > + firmware. A fixed window may only support a subset of memory > + types. The 'cap_*' attributes indicate whether persistent > + memory, volatile memory, accelerator memory, and / or expander > + memory may be mapped behind this decoder's memory window. > + > +What: /sys/bus/cxl/devices/decoderX.Y/target_type > +Date: June, 2021 > +KernelVersion: v5.14 > +Contact: linux-cxl@vger.kernel.org > +Description: > + When a CXL decoder is of devtype "cxl_decoder_switch", it can > + optionally decode either accelerator memory (type-2) or expander > + memory (type-3). The 'target_type' attribute indicates the > + current setting which may dynamically change based on what > + memory regions are activated in this decode hierarchy. Nice docs. > diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c > index ec324bf063b8..6f203ba7fc1d 100644 > --- a/drivers/cxl/acpi.c > +++ b/drivers/cxl/acpi.c > @@ -70,6 +70,7 @@ static int add_host_bridge_uport(struct device *match, void *arg) > struct device *host = root_port->dev.parent; > struct acpi_pci_root *pci_root; > struct cxl_walk_context ctx; > + struct cxl_decoder *cxld; > struct cxl_port *port; > > if (!bridge) > @@ -94,7 +95,25 @@ static int add_host_bridge_uport(struct device *match, void *arg) > > if (ctx.count == 0) > return -ENODEV; > - return ctx.error; > + if (ctx.error) > + return ctx.error; > + > + /* TODO: Scan CHBCR for HDM Decoder resources */ > + > + /* > + * In the single-port host-bridge case there are no HDM decoders > + * in the CHBCR and a 1:1 passthrough decode is implied. > + */ > + if (ctx.count == 1) { > + cxld = devm_cxl_add_decoder(host, port, 1, 0, -2, 1, 0, -2? I'm guessing that has some special meaning and perhaps warrants a nice define to let us know what that is. Given this interface is a bit long perhaps even wroth a comment here on why the values are what they are? > + CXL_DECODER_EXPANDER, 0); > + if (IS_ERR(cxld)) > + return PTR_ERR(cxld); > + > + dev_dbg(host, "add: %s\n", dev_name(&cxld->dev)); > + } > + > + return 0; > } > > static int add_host_bridge_dport(struct device *match, void *arg) > diff --git a/drivers/cxl/core.c b/drivers/cxl/core.c > index 4418b30cce4f..781efe51f186 100644 > --- a/drivers/cxl/core.c > +++ b/drivers/cxl/core.c > @@ -33,6 +33,168 @@ static struct attribute_group cxl_base_attribute_group = { > .attrs = cxl_base_attributes, > }; > > +static ssize_t start_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); > + > + return sysfs_emit(buf, "%#llx\n", cxld->range.start); > +} > +static DEVICE_ATTR_RO(start); > + > +static ssize_t end_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); > + > + return sysfs_emit(buf, "%#llx\n", cxld->range.end); > +} > +static DEVICE_ATTR_RO(end); > + > +#define CXL_DECODER_FLAG_ATTR(name, flag) \ > +static ssize_t name##_show(struct device *dev, \ > + struct device_attribute *attr, char *buf) \ > +{ \ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); \ > + \ > + return sysfs_emit(buf, "%s\n", \ > + (cxld->flags & (flag)) ? "1" : "0"); \ > +} \ > +static DEVICE_ATTR_RO(name) > + > +CXL_DECODER_FLAG_ATTR(cap_pmem, CXL_DECODER_F_PMEM); > +CXL_DECODER_FLAG_ATTR(cap_ram, CXL_DECODER_F_RAM); > +CXL_DECODER_FLAG_ATTR(cap_type2, CXL_DECODER_F_TYPE2); > +CXL_DECODER_FLAG_ATTR(cap_type3, CXL_DECODER_F_TYPE3); > +CXL_DECODER_FLAG_ATTR(locked, CXL_DECODER_F_LOCK); > + > +static ssize_t target_type_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); > + > + switch (cxld->target_type) { > + case CXL_DECODER_ACCELERATOR: > + return sysfs_emit(buf, "accelerator\n"); > + case CXL_DECODER_EXPANDER: > + return sysfs_emit(buf, "expander\n"); > + } > + return -ENXIO; > +} > +DEVICE_ATTR_RO(target_type); > + > +static ssize_t target_list_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); > + ssize_t offset = 0; > + int i, rc = 0; > + > + device_lock(dev); > + for (i = 0; i < cxld->interleave_ways; i++) { > + struct cxl_dport *dport = cxld->target[i]; > + struct cxl_dport *next = NULL; > + > + if (!dport) > + break; > + > + if (i + 1 < cxld->interleave_ways) > + next = cxld->target[i + 1]; > + rc = sysfs_emit_at(buf, offset, "%d%s", dport->port_id, > + next ? "," : ""); > + if (rc < 0) > + break; > + offset += rc; > + } > + device_unlock(dev); > + > + if (rc < 0) > + return rc; > + > + rc = sysfs_emit_at(buf, offset, "\n"); > + if (rc < 0) > + return rc; > + > + return offset + rc; > +} > +DEVICE_ATTR_RO(target_list); > + > +static struct attribute *cxl_decoder_base_attrs[] = { > + &dev_attr_start.attr, > + &dev_attr_end.attr, > + &dev_attr_locked.attr, > + &dev_attr_target_list.attr, > + NULL, > +}; > + > +static struct attribute_group cxl_decoder_base_attribute_group = { > + .attrs = cxl_decoder_base_attrs, > +}; > + > +static struct attribute *cxl_decoder_root_attrs[] = { > + &dev_attr_cap_pmem.attr, > + &dev_attr_cap_ram.attr, > + &dev_attr_cap_type2.attr, > + &dev_attr_cap_type3.attr, > + NULL, > +}; > + > +static struct attribute_group cxl_decoder_root_attribute_group = { > + .attrs = cxl_decoder_root_attrs, > +}; > + > +static const struct attribute_group *cxl_decoder_root_attribute_groups[] = { > + &cxl_decoder_root_attribute_group, > + &cxl_decoder_base_attribute_group, > + &cxl_base_attribute_group, > + NULL, > +}; > + > +static struct attribute *cxl_decoder_switch_attrs[] = { > + &dev_attr_target_type.attr, > + NULL, > +}; > + > +static struct attribute_group cxl_decoder_switch_attribute_group = { > + .attrs = cxl_decoder_switch_attrs, > +}; > + > +static const struct attribute_group *cxl_decoder_switch_attribute_groups[] = { > + &cxl_decoder_switch_attribute_group, > + &cxl_decoder_base_attribute_group, > + &cxl_base_attribute_group, > + NULL, > +}; > + > +static void cxl_decoder_release(struct device *dev) > +{ > + struct cxl_decoder *cxld = to_cxl_decoder(dev); > + struct cxl_port *port = to_cxl_port(dev->parent); > + > + ida_free(&port->decoder_ida, cxld->id); > + kfree(cxld); > +} > + > +static const struct device_type cxl_decoder_switch_type = { > + .name = "cxl_decoder_switch", > + .release = cxl_decoder_release, > + .groups = cxl_decoder_switch_attribute_groups, > +}; > + > +static const struct device_type cxl_decoder_root_type = { > + .name = "cxl_decoder_root", > + .release = cxl_decoder_release, > + .groups = cxl_decoder_root_attribute_groups, > +}; > + > +struct cxl_decoder *to_cxl_decoder(struct device *dev) > +{ > + if (dev_WARN_ONCE(dev, dev->type->release != cxl_decoder_release, > + "not a cxl_decoder device\n")) > + return NULL; > + return container_of(dev, struct cxl_decoder, dev); > +} > + > static void cxl_dport_release(struct cxl_dport *dport) > { > put_device(dport->dport); > @@ -138,6 +300,7 @@ static struct cxl_port *cxl_port_alloc(struct device *uport, > > port->uport = uport; > port->component_reg_phys = component_reg_phys; > + ida_init(&port->decoder_ida); > INIT_LIST_HEAD(&port->dports); > > device_initialize(dev); > @@ -262,6 +425,108 @@ int cxl_add_dport(struct cxl_port *port, struct device *dport_dev, int port_id, > } > EXPORT_SYMBOL_GPL(cxl_add_dport); > > +static struct cxl_decoder * > +cxl_decoder_alloc(struct cxl_port *port, int nr_targets, resource_size_t base, > + resource_size_t len, int interleave_ways, > + int interleave_granularity, enum cxl_decoder_type type, > + unsigned long flags) > +{ > + struct cxl_decoder *cxld; > + struct device *dev; > + int rc = 0; > + > + if (interleave_ways < 1) > + return ERR_PTR(-EINVAL); > + > + device_lock(&port->dev); > + if (list_empty(&port->dports)) > + rc = -EINVAL; > + device_unlock(&port->dev); > + if (rc) > + return ERR_PTR(rc); > + > + cxld = kzalloc(struct_size(cxld, target, nr_targets), GFP_KERNEL); > + if (!cxld) > + return ERR_PTR(-ENOMEM); > + > + rc = ida_alloc(&port->decoder_ida, GFP_KERNEL); > + if (rc < 0) > + goto err; > + > + *cxld = (struct cxl_decoder) { > + .id = rc, > + .range = { > + .start = base, > + .end = base + len - 1, > + }, > + .flags = flags, > + .interleave_ways = interleave_ways, > + .interleave_granularity = interleave_granularity, > + .target_type = type, > + }; > + > + /* handle implied target_list */ > + if (interleave_ways == 1) > + cxld->target[0] = > + list_first_entry(&port->dports, struct cxl_dport, list); > + dev = &cxld->dev; > + device_initialize(dev); > + device_set_pm_not_required(dev); > + dev->parent = &port->dev; > + dev->bus = &cxl_bus_type; > + > + /* root ports do not have a cxl_port_type parent */ > + if (port->dev.parent->type == &cxl_port_type) > + dev->type = &cxl_decoder_switch_type; > + else > + dev->type = &cxl_decoder_root_type; > + > + return cxld; > +err: > + kfree(cxld); > + return ERR_PTR(rc); > +} > + > +static void unregister_dev(void *dev) > +{ > + device_unregister(dev); > +} > + > +struct cxl_decoder * > +devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets, > + resource_size_t base, resource_size_t len, > + int interleave_ways, int interleave_granularity, > + enum cxl_decoder_type type, unsigned long flags) > +{ > + struct cxl_decoder *cxld; > + struct device *dev; > + int rc; > + > + cxld = cxl_decoder_alloc(port, nr_targets, base, len, interleave_ways, > + interleave_granularity, type, flags); > + if (IS_ERR(cxld)) > + return cxld; > + > + dev = &cxld->dev; > + rc = dev_set_name(dev, "decoder%d.%d", port->id, cxld->id); > + if (rc) > + goto err; > + > + rc = device_add(dev); > + if (rc) > + goto err; > + > + rc = devm_add_action_or_reset(host, unregister_dev, dev); > + if (rc) > + return ERR_PTR(rc); > + return cxld; > + > +err: > + put_device(dev); > + return ERR_PTR(rc); > +} > +EXPORT_SYMBOL_GPL(devm_cxl_add_decoder); > + > /** > * cxl_probe_component_regs() - Detect CXL Component register blocks > * @dev: Host device of the @base mapping > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h > index 0b89fcfe728a..f350c92d37d2 100644 > --- a/drivers/cxl/cxl.h > +++ b/drivers/cxl/cxl.h > @@ -148,6 +148,44 @@ int cxl_map_device_regs(struct pci_dev *pdev, > #define CXL_RESOURCE_NONE ((resource_size_t) -1) > #define CXL_TARGET_STRLEN 20 > > +/* > + * cxl_decoder flags that define the type of memory / devices this > + * decoder supports as well as configuration lock status See "CXL 2.0 > + * 8.2.5.12.7 CXL HDM Decoder 0 Control Register" for details. > + */ > +#define CXL_DECODER_F_RAM BIT(0) > +#define CXL_DECODER_F_PMEM BIT(1) > +#define CXL_DECODER_F_TYPE2 BIT(2) > +#define CXL_DECODER_F_TYPE3 BIT(3) > +#define CXL_DECODER_F_LOCK BIT(4) > +#define CXL_DECODER_F_MASK GENMASK(4, 0) > + > +enum cxl_decoder_type { > + CXL_DECODER_ACCELERATOR = 2, > + CXL_DECODER_EXPANDER = 3, > +}; > + > +/** > + * struct cxl_decoder - CXL address range decode configuration Parameters in different order from in structure and not all there. > + * @range: address range considered by this decoder > + * @id: kernel device name id > + * @interleave_ways: number of cxl_dports in this decode > + * @interleave_granularity: data stride per dport > + * @target_type: accelerator vs expander (type2 vs type3) selector > + * @flags: memory type capabilities and locking > + * @target: active ordered target list in current decoder configuration > + */ > +struct cxl_decoder { > + struct device dev; > + int id; > + struct range range; > + int interleave_ways; > + int interleave_granularity; > + enum cxl_decoder_type target_type; > + unsigned long flags; > + struct cxl_dport *target[]; > +}; > + > /** > * struct cxl_port - logical collection of upstream port devices and > * downstream port devices to construct a CXL memory > @@ -156,6 +194,7 @@ int cxl_map_device_regs(struct pci_dev *pdev, > * @uport: PCI or platform device implementing the upstream port capability > * @id: id for port device-name > * @dports: cxl_dport instances referenced by decoders > + * @decoder_ida: allocator for decoder ids > * @component_regs_phys: component register capability base address (optional) > */ > struct cxl_port { > @@ -163,6 +202,7 @@ struct cxl_port { > struct device *uport; > int id; > struct list_head dports; > + struct ida decoder_ida; > resource_size_t component_reg_phys; > }; > > @@ -189,5 +229,13 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport, > > int cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id, > resource_size_t component_reg_phys); > + > +struct cxl_decoder *to_cxl_decoder(struct device *dev); > +struct cxl_decoder * > +devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets, > + resource_size_t base, resource_size_t len, > + int interleave_ways, int interleave_granularity, > + enum cxl_decoder_type type, unsigned long flags); > + > extern struct bus_type cxl_bus_type; > #endif /* __CXL_H__ */ >
On Tue, Jun 8, 2021 at 6:06 AM Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote: > > On Sat, 5 Jun 2021 23:05:27 -0700 > Dan Williams <dan.j.williams@intel.com> wrote: > > > A cxl_decoder is a child of a cxl_port. It represents a hardware > > decoder configuration of an upstream port to one or more of its > > downstream ports. The decoder is either represented in standard HDM > > decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder > > Capability Structure), or it is a static decode configuration > > communicated by platform firmware (see the CXL Early Discovery Table: > > Fixed Memory Window Structure). > > > > The firmware described and hardware described decoders differ slightly > > leading to 2 different sub-types of decoders, cxl_decoder_root and > > cxl_decoder_switch. At the root level the decode capabilities restrict > > what can be mapped beneath them. Mid-level switch decoders are > > configured for either acclerator (type-2) or memory-expander (type-3) > > operation, but they are otherwise agnostic to the type of memory > > (volatile vs persistent) being mapped. > > > > Here is an example topology from a single-ported host-bridge environment > > without CFMWS decodes enumerated. > > > > /sys/bus/cxl/devices/root0 > > ├── devtype > > ├── dport0 -> ../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 > > ├── port1 > > │ ├── decoder1.0 > > │ │ ├── devtype > > │ │ ├── end > > │ │ ├── locked > > │ │ ├── start > > │ │ ├── subsystem -> ../../../../bus/cxl > > │ │ ├── target_list > > │ │ ├── target_type > > │ │ └── uevent > > │ ├── devtype > > │ ├── dport0 -> ../../pci0000:34/0000:34:00.0 > > │ ├── subsystem -> ../../../bus/cxl > > │ ├── uevent > > │ └── uport -> ../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 > > ├── subsystem -> ../../bus/cxl > > ├── uevent > > └── uport -> ../platform/ACPI0017:00 > > > > Signed-off-by: Dan Williams <dan.j.williams@intel.com> > > One trivial docs issue and a suggestion that -2 is a bit too magic. > Otherwise looks good to me. > > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > --- > > Documentation/ABI/testing/sysfs-bus-cxl | 70 ++++++++ > > drivers/cxl/acpi.c | 21 ++ > > drivers/cxl/core.c | 265 +++++++++++++++++++++++++++++++ > > drivers/cxl/cxl.h | 48 ++++++ > > 4 files changed, 403 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl > > index 0cb31b7ad17b..f16f18e77578 100644 > > --- a/Documentation/ABI/testing/sysfs-bus-cxl > > +++ b/Documentation/ABI/testing/sysfs-bus-cxl > > @@ -48,3 +48,73 @@ Description: > > decode of CXL memory resources. The 'Y' integer reflects the > > hardware port unique-id used in the hardware decoder target > > list. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + CXL decoder objects are enumerated from either a platform > > + firmware description, or a CXL HDM decoder register set in a > > + PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder > > + Capability Structure). The 'X' in decoderX.Y represents the > > + cxl_port container of this decoder, and 'Y' represents the > > + instance id of a given decoder resource. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y/{start,end} > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + The 'start' and 'end' attributes together convey the physical > > + address base and last addressable byte of the decoder's decode > > + window. For decoders of devtype "cxl_decoder_root" the address > > + range is fixed. For decoders of devtype "cxl_decoder_switch" the > > + address is bounded by the decode range of the cxl_port ancestor > > + of the decoder's cxl_port, and dynamically updates based on the > > + active memory regions in that address space. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y/locked > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + CXL HDM decoders have the capability to lock the configuration > > + until the next device reset. For decoders of devtype > > + "cxl_decoder_root" there is no standard facility to unlock them. > > + For decoders of devtype "cxl_decoder_switch" a secondary bus > > + reset, of the PCIe bridge that provides the bus for this > > + decoders uport, unlocks / resets the decoder. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y/target_list > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + Display a comma separated list of the current decoder target > > + configuration. The list is ordered by the current configured > > + interleave order of the decoder's dport instances. Each entry in > > + the list is a dport id. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3} > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + When a CXL decoder is of devtype "cxl_decoder_root", it > > + represents a fixed memory window identified by platform > > + firmware. A fixed window may only support a subset of memory > > + types. The 'cap_*' attributes indicate whether persistent > > + memory, volatile memory, accelerator memory, and / or expander > > + memory may be mapped behind this decoder's memory window. > > + > > +What: /sys/bus/cxl/devices/decoderX.Y/target_type > > +Date: June, 2021 > > +KernelVersion: v5.14 > > +Contact: linux-cxl@vger.kernel.org > > +Description: > > + When a CXL decoder is of devtype "cxl_decoder_switch", it can > > + optionally decode either accelerator memory (type-2) or expander > > + memory (type-3). The 'target_type' attribute indicates the > > + current setting which may dynamically change based on what > > + memory regions are activated in this decode hierarchy. > > Nice docs. > > > diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c > > index ec324bf063b8..6f203ba7fc1d 100644 > > --- a/drivers/cxl/acpi.c > > +++ b/drivers/cxl/acpi.c > > @@ -70,6 +70,7 @@ static int add_host_bridge_uport(struct device *match, void *arg) > > struct device *host = root_port->dev.parent; > > struct acpi_pci_root *pci_root; > > struct cxl_walk_context ctx; > > + struct cxl_decoder *cxld; > > struct cxl_port *port; > > > > if (!bridge) > > @@ -94,7 +95,25 @@ static int add_host_bridge_uport(struct device *match, void *arg) > > > > if (ctx.count == 0) > > return -ENODEV; > > - return ctx.error; > > + if (ctx.error) > > + return ctx.error; > > + > > + /* TODO: Scan CHBCR for HDM Decoder resources */ > > + > > + /* > > + * In the single-port host-bridge case there are no HDM decoders > > + * in the CHBCR and a 1:1 passthrough decode is implied. > > + */ > > + if (ctx.count == 1) { > > + cxld = devm_cxl_add_decoder(host, port, 1, 0, -2, 1, 0, > > -2? I'm guessing that has some special meaning and perhaps warrants > a nice define to let us know what that is. Um, yes, I think I went back and forth on whether this should be a zero-length range starting at zero or a zero-length range starting at UINT64_MAX, and I ended up botching it with a range of 0 to UINT64_MAX - 1. I'll fix this up to provide a "passthrough" version of devm_cxl_add_decoder() for the cases like this where a port does not adjust the decode from the parent port down to the next level. > > Given this interface is a bit long perhaps even wroth a comment here on > why the values are what they are? The passthrough helper will address this.
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 0cb31b7ad17b..f16f18e77578 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -48,3 +48,73 @@ Description: decode of CXL memory resources. The 'Y' integer reflects the hardware port unique-id used in the hardware decoder target list. + +What: /sys/bus/cxl/devices/decoderX.Y +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + CXL decoder objects are enumerated from either a platform + firmware description, or a CXL HDM decoder register set in a + PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder + Capability Structure). The 'X' in decoderX.Y represents the + cxl_port container of this decoder, and 'Y' represents the + instance id of a given decoder resource. + +What: /sys/bus/cxl/devices/decoderX.Y/{start,end} +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + The 'start' and 'end' attributes together convey the physical + address base and last addressable byte of the decoder's decode + window. For decoders of devtype "cxl_decoder_root" the address + range is fixed. For decoders of devtype "cxl_decoder_switch" the + address is bounded by the decode range of the cxl_port ancestor + of the decoder's cxl_port, and dynamically updates based on the + active memory regions in that address space. + +What: /sys/bus/cxl/devices/decoderX.Y/locked +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + CXL HDM decoders have the capability to lock the configuration + until the next device reset. For decoders of devtype + "cxl_decoder_root" there is no standard facility to unlock them. + For decoders of devtype "cxl_decoder_switch" a secondary bus + reset, of the PCIe bridge that provides the bus for this + decoders uport, unlocks / resets the decoder. + +What: /sys/bus/cxl/devices/decoderX.Y/target_list +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + Display a comma separated list of the current decoder target + configuration. The list is ordered by the current configured + interleave order of the decoder's dport instances. Each entry in + the list is a dport id. + +What: /sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3} +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + When a CXL decoder is of devtype "cxl_decoder_root", it + represents a fixed memory window identified by platform + firmware. A fixed window may only support a subset of memory + types. The 'cap_*' attributes indicate whether persistent + memory, volatile memory, accelerator memory, and / or expander + memory may be mapped behind this decoder's memory window. + +What: /sys/bus/cxl/devices/decoderX.Y/target_type +Date: June, 2021 +KernelVersion: v5.14 +Contact: linux-cxl@vger.kernel.org +Description: + When a CXL decoder is of devtype "cxl_decoder_switch", it can + optionally decode either accelerator memory (type-2) or expander + memory (type-3). The 'target_type' attribute indicates the + current setting which may dynamically change based on what + memory regions are activated in this decode hierarchy. diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c index ec324bf063b8..6f203ba7fc1d 100644 --- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -70,6 +70,7 @@ static int add_host_bridge_uport(struct device *match, void *arg) struct device *host = root_port->dev.parent; struct acpi_pci_root *pci_root; struct cxl_walk_context ctx; + struct cxl_decoder *cxld; struct cxl_port *port; if (!bridge) @@ -94,7 +95,25 @@ static int add_host_bridge_uport(struct device *match, void *arg) if (ctx.count == 0) return -ENODEV; - return ctx.error; + if (ctx.error) + return ctx.error; + + /* TODO: Scan CHBCR for HDM Decoder resources */ + + /* + * In the single-port host-bridge case there are no HDM decoders + * in the CHBCR and a 1:1 passthrough decode is implied. + */ + if (ctx.count == 1) { + cxld = devm_cxl_add_decoder(host, port, 1, 0, -2, 1, 0, + CXL_DECODER_EXPANDER, 0); + if (IS_ERR(cxld)) + return PTR_ERR(cxld); + + dev_dbg(host, "add: %s\n", dev_name(&cxld->dev)); + } + + return 0; } static int add_host_bridge_dport(struct device *match, void *arg) diff --git a/drivers/cxl/core.c b/drivers/cxl/core.c index 4418b30cce4f..781efe51f186 100644 --- a/drivers/cxl/core.c +++ b/drivers/cxl/core.c @@ -33,6 +33,168 @@ static struct attribute_group cxl_base_attribute_group = { .attrs = cxl_base_attributes, }; +static ssize_t start_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct cxl_decoder *cxld = to_cxl_decoder(dev); + + return sysfs_emit(buf, "%#llx\n", cxld->range.start); +} +static DEVICE_ATTR_RO(start); + +static ssize_t end_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct cxl_decoder *cxld = to_cxl_decoder(dev); + + return sysfs_emit(buf, "%#llx\n", cxld->range.end); +} +static DEVICE_ATTR_RO(end); + +#define CXL_DECODER_FLAG_ATTR(name, flag) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct cxl_decoder *cxld = to_cxl_decoder(dev); \ + \ + return sysfs_emit(buf, "%s\n", \ + (cxld->flags & (flag)) ? "1" : "0"); \ +} \ +static DEVICE_ATTR_RO(name) + +CXL_DECODER_FLAG_ATTR(cap_pmem, CXL_DECODER_F_PMEM); +CXL_DECODER_FLAG_ATTR(cap_ram, CXL_DECODER_F_RAM); +CXL_DECODER_FLAG_ATTR(cap_type2, CXL_DECODER_F_TYPE2); +CXL_DECODER_FLAG_ATTR(cap_type3, CXL_DECODER_F_TYPE3); +CXL_DECODER_FLAG_ATTR(locked, CXL_DECODER_F_LOCK); + +static ssize_t target_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cxl_decoder *cxld = to_cxl_decoder(dev); + + switch (cxld->target_type) { + case CXL_DECODER_ACCELERATOR: + return sysfs_emit(buf, "accelerator\n"); + case CXL_DECODER_EXPANDER: + return sysfs_emit(buf, "expander\n"); + } + return -ENXIO; +} +DEVICE_ATTR_RO(target_type); + +static ssize_t target_list_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct cxl_decoder *cxld = to_cxl_decoder(dev); + ssize_t offset = 0; + int i, rc = 0; + + device_lock(dev); + for (i = 0; i < cxld->interleave_ways; i++) { + struct cxl_dport *dport = cxld->target[i]; + struct cxl_dport *next = NULL; + + if (!dport) + break; + + if (i + 1 < cxld->interleave_ways) + next = cxld->target[i + 1]; + rc = sysfs_emit_at(buf, offset, "%d%s", dport->port_id, + next ? "," : ""); + if (rc < 0) + break; + offset += rc; + } + device_unlock(dev); + + if (rc < 0) + return rc; + + rc = sysfs_emit_at(buf, offset, "\n"); + if (rc < 0) + return rc; + + return offset + rc; +} +DEVICE_ATTR_RO(target_list); + +static struct attribute *cxl_decoder_base_attrs[] = { + &dev_attr_start.attr, + &dev_attr_end.attr, + &dev_attr_locked.attr, + &dev_attr_target_list.attr, + NULL, +}; + +static struct attribute_group cxl_decoder_base_attribute_group = { + .attrs = cxl_decoder_base_attrs, +}; + +static struct attribute *cxl_decoder_root_attrs[] = { + &dev_attr_cap_pmem.attr, + &dev_attr_cap_ram.attr, + &dev_attr_cap_type2.attr, + &dev_attr_cap_type3.attr, + NULL, +}; + +static struct attribute_group cxl_decoder_root_attribute_group = { + .attrs = cxl_decoder_root_attrs, +}; + +static const struct attribute_group *cxl_decoder_root_attribute_groups[] = { + &cxl_decoder_root_attribute_group, + &cxl_decoder_base_attribute_group, + &cxl_base_attribute_group, + NULL, +}; + +static struct attribute *cxl_decoder_switch_attrs[] = { + &dev_attr_target_type.attr, + NULL, +}; + +static struct attribute_group cxl_decoder_switch_attribute_group = { + .attrs = cxl_decoder_switch_attrs, +}; + +static const struct attribute_group *cxl_decoder_switch_attribute_groups[] = { + &cxl_decoder_switch_attribute_group, + &cxl_decoder_base_attribute_group, + &cxl_base_attribute_group, + NULL, +}; + +static void cxl_decoder_release(struct device *dev) +{ + struct cxl_decoder *cxld = to_cxl_decoder(dev); + struct cxl_port *port = to_cxl_port(dev->parent); + + ida_free(&port->decoder_ida, cxld->id); + kfree(cxld); +} + +static const struct device_type cxl_decoder_switch_type = { + .name = "cxl_decoder_switch", + .release = cxl_decoder_release, + .groups = cxl_decoder_switch_attribute_groups, +}; + +static const struct device_type cxl_decoder_root_type = { + .name = "cxl_decoder_root", + .release = cxl_decoder_release, + .groups = cxl_decoder_root_attribute_groups, +}; + +struct cxl_decoder *to_cxl_decoder(struct device *dev) +{ + if (dev_WARN_ONCE(dev, dev->type->release != cxl_decoder_release, + "not a cxl_decoder device\n")) + return NULL; + return container_of(dev, struct cxl_decoder, dev); +} + static void cxl_dport_release(struct cxl_dport *dport) { put_device(dport->dport); @@ -138,6 +300,7 @@ static struct cxl_port *cxl_port_alloc(struct device *uport, port->uport = uport; port->component_reg_phys = component_reg_phys; + ida_init(&port->decoder_ida); INIT_LIST_HEAD(&port->dports); device_initialize(dev); @@ -262,6 +425,108 @@ int cxl_add_dport(struct cxl_port *port, struct device *dport_dev, int port_id, } EXPORT_SYMBOL_GPL(cxl_add_dport); +static struct cxl_decoder * +cxl_decoder_alloc(struct cxl_port *port, int nr_targets, resource_size_t base, + resource_size_t len, int interleave_ways, + int interleave_granularity, enum cxl_decoder_type type, + unsigned long flags) +{ + struct cxl_decoder *cxld; + struct device *dev; + int rc = 0; + + if (interleave_ways < 1) + return ERR_PTR(-EINVAL); + + device_lock(&port->dev); + if (list_empty(&port->dports)) + rc = -EINVAL; + device_unlock(&port->dev); + if (rc) + return ERR_PTR(rc); + + cxld = kzalloc(struct_size(cxld, target, nr_targets), GFP_KERNEL); + if (!cxld) + return ERR_PTR(-ENOMEM); + + rc = ida_alloc(&port->decoder_ida, GFP_KERNEL); + if (rc < 0) + goto err; + + *cxld = (struct cxl_decoder) { + .id = rc, + .range = { + .start = base, + .end = base + len - 1, + }, + .flags = flags, + .interleave_ways = interleave_ways, + .interleave_granularity = interleave_granularity, + .target_type = type, + }; + + /* handle implied target_list */ + if (interleave_ways == 1) + cxld->target[0] = + list_first_entry(&port->dports, struct cxl_dport, list); + dev = &cxld->dev; + device_initialize(dev); + device_set_pm_not_required(dev); + dev->parent = &port->dev; + dev->bus = &cxl_bus_type; + + /* root ports do not have a cxl_port_type parent */ + if (port->dev.parent->type == &cxl_port_type) + dev->type = &cxl_decoder_switch_type; + else + dev->type = &cxl_decoder_root_type; + + return cxld; +err: + kfree(cxld); + return ERR_PTR(rc); +} + +static void unregister_dev(void *dev) +{ + device_unregister(dev); +} + +struct cxl_decoder * +devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets, + resource_size_t base, resource_size_t len, + int interleave_ways, int interleave_granularity, + enum cxl_decoder_type type, unsigned long flags) +{ + struct cxl_decoder *cxld; + struct device *dev; + int rc; + + cxld = cxl_decoder_alloc(port, nr_targets, base, len, interleave_ways, + interleave_granularity, type, flags); + if (IS_ERR(cxld)) + return cxld; + + dev = &cxld->dev; + rc = dev_set_name(dev, "decoder%d.%d", port->id, cxld->id); + if (rc) + goto err; + + rc = device_add(dev); + if (rc) + goto err; + + rc = devm_add_action_or_reset(host, unregister_dev, dev); + if (rc) + return ERR_PTR(rc); + return cxld; + +err: + put_device(dev); + return ERR_PTR(rc); +} +EXPORT_SYMBOL_GPL(devm_cxl_add_decoder); + /** * cxl_probe_component_regs() - Detect CXL Component register blocks * @dev: Host device of the @base mapping diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 0b89fcfe728a..f350c92d37d2 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -148,6 +148,44 @@ int cxl_map_device_regs(struct pci_dev *pdev, #define CXL_RESOURCE_NONE ((resource_size_t) -1) #define CXL_TARGET_STRLEN 20 +/* + * cxl_decoder flags that define the type of memory / devices this + * decoder supports as well as configuration lock status See "CXL 2.0 + * 8.2.5.12.7 CXL HDM Decoder 0 Control Register" for details. + */ +#define CXL_DECODER_F_RAM BIT(0) +#define CXL_DECODER_F_PMEM BIT(1) +#define CXL_DECODER_F_TYPE2 BIT(2) +#define CXL_DECODER_F_TYPE3 BIT(3) +#define CXL_DECODER_F_LOCK BIT(4) +#define CXL_DECODER_F_MASK GENMASK(4, 0) + +enum cxl_decoder_type { + CXL_DECODER_ACCELERATOR = 2, + CXL_DECODER_EXPANDER = 3, +}; + +/** + * struct cxl_decoder - CXL address range decode configuration + * @range: address range considered by this decoder + * @id: kernel device name id + * @interleave_ways: number of cxl_dports in this decode + * @interleave_granularity: data stride per dport + * @target_type: accelerator vs expander (type2 vs type3) selector + * @flags: memory type capabilities and locking + * @target: active ordered target list in current decoder configuration + */ +struct cxl_decoder { + struct device dev; + int id; + struct range range; + int interleave_ways; + int interleave_granularity; + enum cxl_decoder_type target_type; + unsigned long flags; + struct cxl_dport *target[]; +}; + /** * struct cxl_port - logical collection of upstream port devices and * downstream port devices to construct a CXL memory @@ -156,6 +194,7 @@ int cxl_map_device_regs(struct pci_dev *pdev, * @uport: PCI or platform device implementing the upstream port capability * @id: id for port device-name * @dports: cxl_dport instances referenced by decoders + * @decoder_ida: allocator for decoder ids * @component_regs_phys: component register capability base address (optional) */ struct cxl_port { @@ -163,6 +202,7 @@ struct cxl_port { struct device *uport; int id; struct list_head dports; + struct ida decoder_ida; resource_size_t component_reg_phys; }; @@ -189,5 +229,13 @@ struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport, int cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id, resource_size_t component_reg_phys); + +struct cxl_decoder *to_cxl_decoder(struct device *dev); +struct cxl_decoder * +devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets, + resource_size_t base, resource_size_t len, + int interleave_ways, int interleave_granularity, + enum cxl_decoder_type type, unsigned long flags); + extern struct bus_type cxl_bus_type; #endif /* __CXL_H__ */
A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │ ├── decoder1.0 │ │ ├── devtype │ │ ├── end │ │ ├── locked │ │ ├── start │ │ ├── subsystem -> ../../../../bus/cxl │ │ ├── target_list │ │ ├── target_type │ │ └── uevent │ ├── devtype │ ├── dport0 -> ../../pci0000:34/0000:34:00.0 │ ├── subsystem -> ../../../bus/cxl │ ├── uevent │ └── uport -> ../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../bus/cxl ├── uevent └── uport -> ../platform/ACPI0017:00 Signed-off-by: Dan Williams <dan.j.williams@intel.com> --- Documentation/ABI/testing/sysfs-bus-cxl | 70 ++++++++ drivers/cxl/acpi.c | 21 ++ drivers/cxl/core.c | 265 +++++++++++++++++++++++++++++++ drivers/cxl/cxl.h | 48 ++++++ 4 files changed, 403 insertions(+), 1 deletion(-)