Index: linux-2.6/drivers/pci/pcie/portdrv_pci.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/portdrv_pci.c
+++ linux-2.6/drivers/pci/pcie/portdrv_pci.c
@@ -29,6 +29,32 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
+/* If this switch is set, PCIe port native services should not be enabled. */
+bool pcie_ports_disabled;
+
+/*
+ * If this switch is set, ACPI _OSC will be used to determine whether or not to
+ * enable PCIe port native services.
+ */
+static bool pcie_ports_auto = true;
+
+static int __init pcie_port_setup(char *str)
+{
+	if (!strncmp(str, "auto", 4)) {
+		pcie_ports_disabled = false;
+		pcie_ports_auto = true;
+	} else if (!strncmp(str, "native", 6)) {
+		pcie_ports_disabled = false;
+		pcie_ports_auto = false;
+	} else if (!strncmp(str, "compat", 6)) {
+		pcie_ports_disabled = true;
+		pcie_ports_auto = false;
+	}
+
+	return 1;
+}
+__setup("pcie_ports=", pcie_port_setup);
+
 /* global data */
 
 static int pcie_portdrv_restore_config(struct pci_dev *dev)
@@ -70,7 +96,7 @@ static const struct dev_pm_ops pcie_port
 static int __devinit pcie_portdrv_probe(struct pci_dev *dev,
 					const struct pci_device_id *id)
 {
-	int status;
+	int status, cap_mask;
 
 	if (!pci_is_pcie(dev) ||
 	    ((dev->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
@@ -82,7 +108,16 @@ static int __devinit pcie_portdrv_probe(
 		dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
 			 "check vendor BIOS\n", dev->vendor, dev->device);
 	}
-	status = pcie_port_device_register(dev);
+
+	status = pcie_port_platform_notify(dev, &cap_mask);
+	if (pcie_ports_auto) {
+		if (status)
+			return status;
+	} else {
+		cap_mask = PCIE_PORT_SERVICE_MASK;
+	}
+
+	status = pcie_port_device_register(dev, cap_mask);
 	if (status)
 		return status;
 
@@ -301,6 +336,9 @@ static int __init pcie_portdrv_init(void
 {
 	int retval;
 
+	if (pcie_ports_disabled)
+		return -EACCES;
+
 	dmi_check_system(pcie_portdrv_dmi_table);
 
 	retval = pcie_port_bus_register();
@@ -315,11 +353,4 @@ static int __init pcie_portdrv_init(void
 	return retval;
 }
 
-static void __exit pcie_portdrv_exit(void)
-{
-	pci_unregister_driver(&pcie_portdriver);
-	pcie_port_bus_unregister();
-}
-
 module_init(pcie_portdrv_init);
-module_exit(pcie_portdrv_exit);
Index: linux-2.6/drivers/pci/pcie/portdrv_acpi.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/pci/pcie/portdrv_acpi.c
@@ -0,0 +1,86 @@
+/*
+ * PCIe Port Native Services Support, ACPI-Related Part
+ *
+ * Copyright (C) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+#include "aer/aerdrv.h"
+
+/**
+ * pcie_port_acpi_setup - Request the BIOS to release control of PCIe services.
+ * @port: PCIe Port service for a root port or event collector.
+ * @srv_mask: Bit mask of services that can be enabled for @port.
+ *
+ * Invoked when @port is identified as a PCIe port device.  To avoid conflicts
+ * with the BIOS PCIe port native services support requires the BIOS to yield
+ * control of these services to the kernel.  The mask of services that the BIOS
+ * allows to be enabled for @port is written to @srv_mask.
+ *
+ * NOTE: It turns out that we cannot do that for individual port services
+ * separately, because that would make some systems work incorrectly.
+ */
+int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask)
+{
+	acpi_status status;
+	acpi_handle handle;
+	u32 flags, req_flags;
+
+	if (acpi_pci_disabled)
+		return 0;
+
+	handle = acpi_find_root_bridge_handle(port);
+	if (!handle)
+		return -EINVAL;
+
+	status = acpi_pci_osc_control_get(handle, &flags);
+	if (ACPI_FAILURE(status)) {
+		dev_info(&port->dev, "ACPI _OSC query failed (code %d)\n",
+			status);
+		return -ENODEV;
+	}
+
+	if (!(flags & OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)) {
+		dev_info(&port->dev,
+			"BIOS refuses to grant control of PCIe Capability "
+			"Structure\n");
+		return -EACCES;
+	}
+
+	req_flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL;
+	*srv_mask = PCIE_PORT_SERVICE_VC;
+	if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) {
+		req_flags |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
+		*srv_mask |= PCIE_PORT_SERVICE_HP;
+	}
+	if (flags & OSC_PCI_EXPRESS_PME_CONTROL) {
+		req_flags |= OSC_PCI_EXPRESS_PME_CONTROL;
+		*srv_mask |= PCIE_PORT_SERVICE_PME;
+	}
+
+	if (pcie_aer_get_firmware_first(port)) {
+		dev_dbg(&port->dev, "PCIe errors handled by BIOS.\n");
+	} else if (flags & OSC_PCI_EXPRESS_AER_CONTROL) {
+		req_flags |= OSC_PCI_EXPRESS_AER_CONTROL;
+		*srv_mask |= PCIE_PORT_SERVICE_AER;
+	}
+
+	status = acpi_pci_osc_control_set(handle, req_flags);
+	if (ACPI_FAILURE(status)) {
+		dev_info(&port->dev, "ACPI _OSC request failed (code %d)\n",
+			status);
+		return -ENODEV;
+	}
+
+	return 0;
+}
Index: linux-2.6/drivers/pci/pcie/portdrv.h
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/portdrv.h
+++ linux-2.6/drivers/pci/pcie/portdrv.h
@@ -20,8 +20,10 @@
 
 #define get_descriptor_id(type, service) (((type - 4) << 4) | service)
 
+extern bool pcie_ports_disabled;
+
 extern struct bus_type pcie_port_bus_type;
-extern int pcie_port_device_register(struct pci_dev *dev);
+extern int pcie_port_device_register(struct pci_dev *dev, int cap_mask);
 #ifdef CONFIG_PM
 extern int pcie_port_device_suspend(struct device *dev);
 extern int pcie_port_device_resume(struct device *dev);
@@ -30,6 +32,8 @@ extern void pcie_port_device_remove(stru
 extern int __must_check pcie_port_bus_register(void);
 extern void pcie_port_bus_unregister(void);
 
+struct pci_dev;
+
 #ifdef CONFIG_PCIE_PME
 extern bool pcie_pme_msi_disabled;
 
@@ -42,9 +46,26 @@ static inline bool pcie_pme_no_msi(void)
 {
 	return pcie_pme_msi_disabled;
 }
+
+extern void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable);
 #else /* !CONFIG_PCIE_PME */
 static inline void pcie_pme_disable_msi(void) {}
 static inline bool pcie_pme_no_msi(void) { return false; }
+static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
 #endif /* !CONFIG_PCIE_PME */
 
+#ifdef CONFIG_ACPI
+extern int pcie_port_acpi_setup(struct pci_dev *port, int *mask);
+
+static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask)
+{
+	return pcie_port_acpi_setup(port, mask);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask)
+{
+	return 0;
+}
+#endif /* !CONFIG_ACPI */
+
 #endif /* _PORTDRV_H_ */
Index: linux-2.6/drivers/pci/pcie/Makefile
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/Makefile
+++ linux-2.6/drivers/pci/pcie/Makefile
@@ -6,10 +6,11 @@
 obj-$(CONFIG_PCIEASPM)		+= aspm.o
 
 pcieportdrv-y			:= portdrv_core.o portdrv_pci.o portdrv_bus.o
+pcieportdrv-$(CONFIG_ACPI)	+= portdrv_acpi.o
 
 obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o
 
 # Build PCI Express AER if needed
 obj-$(CONFIG_PCIEAER)		+= aer/
 
-obj-$(CONFIG_PCIE_PME) += pme/
+obj-$(CONFIG_PCIE_PME) += pme/pcie_pme.o
Index: linux-2.6/drivers/pci/pcie/portdrv_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/portdrv_core.c
+++ linux-2.6/drivers/pci/pcie/portdrv_core.c
@@ -14,6 +14,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/pcieport_if.h>
+#include <linux/aer.h>
 
 #include "../pci.h"
 #include "portdrv.h"
@@ -242,18 +243,31 @@ static int get_port_device_capability(st
 	/* Hot-Plug Capable */
 	if (reg16 & PCI_EXP_FLAGS_SLOT) {
 		pci_read_config_dword(dev, pos + PCI_EXP_SLTCAP, &reg32);
-		if (reg32 & PCI_EXP_SLTCAP_HPC)
+		if (reg32 & PCI_EXP_SLTCAP_HPC) {
 			services |= PCIE_PORT_SERVICE_HP;
+			/*
+			 * Disable hot-plug interrupts in case the hot-plug
+			 * service driver is not loaded.
+			 */
+			pos += PCI_EXP_SLTCTL;
+			pci_read_config_word(dev, pos, &reg16);
+			reg16 &= ~(PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+			pci_write_config_word(dev, pos, reg16);
+		}
 	}
 	/* AER capable */
-	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR))
+	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) {
 		services |= PCIE_PORT_SERVICE_AER;
+		pci_disable_pcie_error_reporting(dev);
+	}
 	/* VC support */
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VC))
 		services |= PCIE_PORT_SERVICE_VC;
 	/* Root ports are capable of generating PME too */
-	if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+	if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
 		services |= PCIE_PORT_SERVICE_PME;
+		pcie_pme_interrupt_enable(dev, false);
+	}
 
 	return services;
 }
@@ -302,13 +316,13 @@ static int pcie_device_init(struct pci_d
  * Allocate the port extension structure and register services associated with
  * the port.
  */
-int pcie_port_device_register(struct pci_dev *dev)
+int pcie_port_device_register(struct pci_dev *dev, int cap_mask)
 {
 	int status, capabilities, i, nr_service;
 	int irqs[PCIE_PORT_DEVICE_MAXSERVICES];
 
 	/* Get and check PCI Express port services */
-	capabilities = get_port_device_capability(dev);
+	capabilities = get_port_device_capability(dev) & cap_mask;
 	if (!capabilities)
 		return -ENODEV;
 
@@ -494,6 +508,9 @@ static void pcie_port_shutdown_service(s
  */
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 {
+	if (pcie_ports_disabled)
+		return -ENODEV;
+
 	new->driver.name = (char *)new->name;
 	new->driver.bus = &pcie_port_bus_type;
 	new->driver.probe = pcie_port_probe_service;
Index: linux-2.6/drivers/acpi/pci_root.c
===================================================================
--- linux-2.6.orig/drivers/acpi/pci_root.c
+++ linux-2.6/drivers/acpi/pci_root.c
@@ -240,6 +240,9 @@ static acpi_status acpi_pci_query_osc(st
 	if (ACPI_SUCCESS(status)) {
 		root->osc_support_set = support_set;
 		root->osc_control_qry = result;
+		if (!root->osc_queried)
+			dev_info(root->bus->bridge,
+				"ACPI _OSC control mask: 0x%02x\n", result);
 		root->osc_queried = 1;
 	}
 	return status;
@@ -364,6 +367,42 @@ out:
 EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
 
 /**
+ * acpi_pci_osc_control_get - Get the _OSC bits the BIOS will grant control of.
+ * @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
+ * @mask: Address to store the _OSC bits mask at.
+ **/
+acpi_status acpi_pci_osc_control_get(acpi_handle handle, u32 *mask)
+{
+	acpi_status status;
+	acpi_handle tmp;
+	struct acpi_pci_root *root;
+
+	root = acpi_pci_find_root(handle);
+	if (!root)
+		return AE_NOT_EXIST;
+
+	status = acpi_get_handle(handle, "_OSC", &tmp);
+	if (ACPI_FAILURE(status)) {
+		dev_info(root->bus->bridge, "ACPI _OSC not found\n");
+		return status;
+	}
+
+	mutex_lock(&osc_lock);
+
+	if (!root->osc_queried) {
+		status = acpi_pci_query_osc(root, root->osc_support_set);
+		if (ACPI_FAILURE(status))
+			goto out;
+	}
+
+	*mask = root->osc_control_qry;
+
+ out:
+	mutex_unlock(&osc_lock);
+	return status;
+}
+
+/**
  * acpi_pci_osc_control_set - commit requested control to Firmware
  * @handle: acpi_handle for the target ACPI object
  * @flags: driver's requested control bits
@@ -377,10 +416,6 @@ acpi_status acpi_pci_osc_control_set(acp
 	acpi_handle tmp;
 	struct acpi_pci_root *root;
 
-	status = acpi_get_handle(handle, "_OSC", &tmp);
-	if (ACPI_FAILURE(status))
-		return status;
-
 	control_req = (flags & OSC_PCI_CONTROL_MASKS);
 	if (!control_req)
 		return AE_TYPE;
@@ -389,6 +424,12 @@ acpi_status acpi_pci_osc_control_set(acp
 	if (!root)
 		return AE_NOT_EXIST;
 
+	status = acpi_get_handle(handle, "_OSC", &tmp);
+	if (ACPI_FAILURE(status)) {
+		dev_info(root->bus->bridge, "ACPI _OSC not found\n");
+		return status;
+	}
+
 	mutex_lock(&osc_lock);
 	/* No need to evaluate _OSC if the control was already granted. */
 	if ((root->osc_control_set & control_req) == control_req)
@@ -401,8 +442,8 @@ acpi_status acpi_pci_osc_control_set(acp
 			goto out;
 	}
 	if ((root->osc_control_qry & control_req) != control_req) {
-		printk(KERN_DEBUG
-		       "Firmware did not grant requested _OSC control\n");
+		pr_info("ACPI: Requested _OSC control for unsupported mask "
+			"0x%02x\n", control_req);
 		status = AE_SUPPORT;
 		goto out;
 	}
Index: linux-2.6/drivers/pci/pcie/pme/pcie_pme.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/pme/pcie_pme.c
+++ linux-2.6/drivers/pci/pcie/pme/pcie_pme.c
@@ -24,37 +24,12 @@
 #include <linux/pm_runtime.h>
 
 #include "../../pci.h"
-#include "pcie_pme.h"
+#include "../portdrv.h"
 
 #define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
 #define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
 
 /*
- * If set, this switch will prevent the PCIe root port PME service driver from
- * being registered.  Consequently, the interrupt-based PCIe PME signaling will
- * not be used by any PCIe root ports in that case.
- */
-static bool pcie_pme_disabled = true;
-
-/*
- * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
- * "In order to maintain compatibility with non-PCI Express-aware system
- * software, system power management logic must be configured by firmware to use
- * the legacy mechanism of signaling PME by default.  PCI Express-aware system
- * software must notify the firmware prior to enabling native, interrupt-based
- * PME signaling."  However, if the platform doesn't provide us with a suitable
- * notification mechanism or the notification fails, it is not clear whether or
- * not we are supposed to use the interrupt-based PCIe PME signaling.  The
- * switch below can be used to indicate the desired behaviour.  When set, it
- * will make the kernel use the interrupt-based PCIe PME signaling regardless of
- * the platform notification status, although the kernel will attempt to notify
- * the platform anyway.  When unset, it will prevent the kernel from using the
- * the interrupt-based PCIe PME signaling if the platform notification fails,
- * which is the default.
- */
-static bool pcie_pme_force_enable;
-
-/*
  * If this switch is set, MSI will not be used for PCIe PME signaling.  This
  * causes the PCIe port driver to use INTx interrupts only, but it turns out
  * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
@@ -64,38 +39,13 @@ bool pcie_pme_msi_disabled;
 
 static int __init pcie_pme_setup(char *str)
 {
-	if (!strncmp(str, "auto", 4))
-		pcie_pme_disabled = false;
-	else if (!strncmp(str, "force", 5))
-		pcie_pme_force_enable = true;
-
-	str = strchr(str, ',');
-	if (str) {
-		str++;
-		str += strspn(str, " \t");
-		if (*str && !strcmp(str, "nomsi"))
-			pcie_pme_msi_disabled = true;
-	}
+	if (!strncmp(str, "nomsi", 5))
+		pcie_pme_msi_disabled = true;
 
 	return 1;
 }
 __setup("pcie_pme=", pcie_pme_setup);
 
-/**
- * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
- * @srv: PCIe PME root port service to use for carrying out the check.
- *
- * Notify the platform that the native PCIe PME is going to be used and return
- * 'true' if the control of the PCIe PME registers has been acquired from the
- * platform.
- */
-static bool pcie_pme_platform_setup(struct pcie_device *srv)
-{
-	if (!pcie_pme_platform_notify(srv))
-		return true;
-	return pcie_pme_force_enable;
-}
-
 struct pcie_pme_service_data {
 	spinlock_t lock;
 	struct pcie_device *srv;
@@ -108,7 +58,7 @@ struct pcie_pme_service_data {
  * @dev: PCIe root port or event collector.
  * @enable: Enable or disable the interrupt.
  */
-static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
 {
 	int rtctl_pos;
 	u16 rtctl;
@@ -417,9 +367,6 @@ static int pcie_pme_probe(struct pcie_de
 	struct pcie_pme_service_data *data;
 	int ret;
 
-	if (!pcie_pme_platform_setup(srv))
-		return -EACCES;
-
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -509,8 +456,7 @@ static struct pcie_port_service_driver p
  */
 static int __init pcie_pme_service_init(void)
 {
-	return pcie_pme_disabled ?
-		-ENODEV : pcie_port_service_register(&pcie_pme_driver);
+	return pcie_port_service_register(&pcie_pme_driver);
 }
 
 module_init(pcie_pme_service_init);
Index: linux-2.6/drivers/pci/pcie/pme/pcie_pme.h
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/pme/pcie_pme.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * drivers/pci/pcie/pme/pcie_pme.h
- *
- * PCI Express Root Port PME signaling support
- *
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- */
-
-#ifndef _PCIE_PME_H_
-#define _PCIE_PME_H_
-
-struct pcie_device;
-
-#ifdef CONFIG_ACPI
-extern int pcie_pme_acpi_setup(struct pcie_device *srv);
-
-static inline int pcie_pme_platform_notify(struct pcie_device *srv)
-{
-	return pcie_pme_acpi_setup(srv);
-}
-#else /* !CONFIG_ACPI */
-static inline int pcie_pme_platform_notify(struct pcie_device *srv)
-{
-	return 0;
-}
-#endif /* !CONFIG_ACPI */
-
-#endif
Index: linux-2.6/drivers/pci/pcie/pme/pcie_pme_acpi.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/pme/pcie_pme_acpi.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * PCIe Native PME support, ACPI-related part
- *
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License V2.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <linux/pcieport_if.h>
-
-/**
- * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
- * @srv - PCIe PME service for a root port or event collector.
- *
- * Invoked when the PCIe bus type loads PCIe PME service driver.  To avoid
- * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
- * control to the kernel.
- */
-int pcie_pme_acpi_setup(struct pcie_device *srv)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *port = srv->port;
-	acpi_handle handle;
-	int error = 0;
-
-	if (acpi_pci_disabled)
-		return -ENOSYS;
-
-	dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
-
-	handle = acpi_find_root_bridge_handle(port);
-	if (!handle)
-		return -EINVAL;
-
-	status = acpi_pci_osc_control_set(handle,
-			OSC_PCI_EXPRESS_PME_CONTROL |
-			OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
-	if (ACPI_FAILURE(status)) {
-		dev_info(&port->dev,
-			"Failed to receive control of PCIe PME service: %s\n",
-			(status == AE_SUPPORT || status == AE_NOT_FOUND) ?
-			"no _OSC support" : "ACPI _OSC failed");
-		error = -ENODEV;
-	}
-
-	return error;
-}
Index: linux-2.6/drivers/pci/pcie/pme/Makefile
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/pme/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for PCI-Express Root Port PME signaling driver
-#
-
-obj-$(CONFIG_PCIE_PME) += pmedriver.o
-
-pmedriver-objs := pcie_pme.o
-pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
Index: linux-2.6/drivers/pci/pcie/aer/aerdrv_acpi.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ linux-2.6/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -19,42 +19,6 @@
 #include <acpi/apei.h>
 #include "aerdrv.h"
 
-/**
- * aer_osc_setup - run ACPI _OSC method
- * @pciedev: pcie_device which AER is being enabled on
- *
- * @return: Zero on success. Nonzero otherwise.
- *
- * Invoked when PCIe bus loads AER service driver. To avoid conflict with
- * BIOS AER support requires BIOS to yield AER control to OS native driver.
- **/
-int aer_osc_setup(struct pcie_device *pciedev)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *pdev = pciedev->port;
-	acpi_handle handle = NULL;
-
-	if (acpi_pci_disabled)
-		return -1;
-
-	handle = acpi_find_root_bridge_handle(pdev);
-	if (handle) {
-		status = acpi_pci_osc_control_set(handle,
-					OSC_PCI_EXPRESS_AER_CONTROL |
-					OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
-	}
-
-	if (ACPI_FAILURE(status)) {
-		dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't "
-			   "init device: %s\n",
-			   (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
-			   "no _OSC support" : "_OSC failed");
-		return -1;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_ACPI_APEI
 static inline int hest_match_pci(struct acpi_hest_aer_common *p,
 				 struct pci_dev *pci)
Index: linux-2.6/drivers/pci/pcie/aer/aerdrv_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/pcie/aer/aerdrv_core.c
+++ linux-2.6/drivers/pci/pcie/aer/aerdrv_core.c
@@ -771,22 +771,10 @@ void aer_isr(struct work_struct *work)
  */
 int aer_init(struct pcie_device *dev)
 {
-	if (pcie_aer_get_firmware_first(dev->port)) {
-		dev_printk(KERN_DEBUG, &dev->device,
-			   "PCIe errors handled by platform firmware.\n");
-		goto out;
-	}
-
-	if (aer_osc_setup(dev))
-		goto out;
-
-	return 0;
-out:
 	if (forceload) {
 		dev_printk(KERN_DEBUG, &dev->device,
 			   "aerdrv forceload requested.\n");
 		pcie_aer_force_firmware_first(dev->port, 0);
-		return 0;
 	}
-	return -ENXIO;
+	return 0;
 }
Index: linux-2.6/drivers/pci/hotplug/acpi_pcihp.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/acpi_pcihp.c
+++ linux-2.6/drivers/pci/hotplug/acpi_pcihp.c
@@ -338,9 +338,7 @@ int acpi_get_hp_hw_control_from_firmware
 	acpi_handle chandle, handle;
 	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
 
-	flags &= (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
-		  OSC_SHPC_NATIVE_HP_CONTROL |
-		  OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	flags &= OSC_SHPC_NATIVE_HP_CONTROL;
 	if (!flags) {
 		err("Invalid flags %u specified!\n", flags);
 		return -EINVAL;
Index: linux-2.6/drivers/pci/hotplug/pciehp.h
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp.h
+++ linux-2.6/drivers/pci/hotplug/pciehp.h
@@ -176,19 +176,7 @@ static inline void pciehp_firmware_init(
 {
 	pciehp_acpi_slot_detection_init();
 }
-
-static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	int retval;
-	u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
-		     OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
-	retval = acpi_get_hp_hw_control_from_firmware(dev, flags);
-	if (retval)
-		return retval;
-	return pciehp_acpi_slot_detection_check(dev);
-}
 #else
 #define pciehp_firmware_init()				do {} while (0)
-#define pciehp_get_hp_hw_control_from_firmware(dev) 	0
 #endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
Index: linux-2.6/drivers/pci/hotplug/pciehp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_core.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_core.c
@@ -59,7 +59,7 @@ module_param(pciehp_force, bool, 0644);
 MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
+MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if OSHP is missing");
 
 #define PCIE_MODULE_NAME "pciehp"
 
@@ -235,7 +235,7 @@ static int pciehp_probe(struct pcie_devi
 		dev_info(&dev->device,
 			 "Bypassing BIOS check for pciehp use on %s\n",
 			 pci_name(dev->port));
-	else if (pciehp_get_hp_hw_control_from_firmware(dev->port))
+	else if (pciehp_acpi_slot_detection_check(dev->port))
 		goto err_out_none;
 
 	ctrl = pcie_init(dev);
Index: linux-2.6/drivers/pci/hotplug/pciehp_acpi.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_acpi.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_acpi.c
@@ -85,9 +85,7 @@ static int __init dummy_probe(struct pci
 	acpi_handle handle;
 	struct dummy_slot *slot, *tmp;
 	struct pci_dev *pdev = dev->port;
-	/* Note: pciehp_detect_mode != PCIEHP_DETECT_ACPI here */
-	if (pciehp_get_hp_hw_control_from_firmware(pdev))
-		return -ENODEV;
+
 	pos = pci_pcie_cap(pdev);
 	if (!pos)
 		return -ENODEV;
Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt
+++ linux-2.6/Documentation/kernel-parameters.txt
@@ -2047,15 +2047,18 @@ and is between 256 and 4096 characters. 
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
+	pcie_ports=	[PCIE] PCIe ports handling:
+		auto	Ask the BIOS whether or not to use native PCIe services
+			associated with PCIe ports (PME, hot-plug, AER).  Use
+			them only if that is allowed by the BIOS.
+		native	Use native PCIe services associated with PCIe ports
+			unconditionally.
+		compat	Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+			ports driver.
+
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-			Format: {auto|force}[,nomsi]
-		auto	Use native PCIe PME signaling if the BIOS allows the
-			kernel to control PCIe config registers of root ports.
-		force	Use native PCIe PME signaling even if the BIOS refuses
-			to allow the kernel to control the relevant PCIe config
-			registers.
 		nomsi	Do not use MSI for native PCIe PME signaling (this makes
-			all PCIe root ports use INTx for everything).
+			all PCIe root ports use INTx for all services).
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
Index: linux-2.6/include/linux/acpi.h
===================================================================
--- linux-2.6.orig/include/linux/acpi.h
+++ linux-2.6/include/linux/acpi.h
@@ -305,6 +305,7 @@ acpi_status acpi_run_osc(acpi_handle han
 				OSC_PCI_EXPRESS_AER_CONTROL |		\
 				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
 
+extern acpi_status acpi_pci_osc_control_get(acpi_handle handle, u32 *mask);
 extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
 extern void acpi_early_init(void);
 
Index: linux-2.6/include/linux/pcieport_if.h
===================================================================
--- linux-2.6.orig/include/linux/pcieport_if.h
+++ linux-2.6/include/linux/pcieport_if.h
@@ -22,6 +22,11 @@
 #define PCIE_PORT_SERVICE_VC_SHIFT	3	/* Virtual Channel */
 #define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)
 
+#define PCIE_PORT_SERVICE_MASK		(PCIE_PORT_SERVICE_PME \
+					| PCIE_PORT_SERVICE_AER \
+					| PCIE_PORT_SERVICE_HP \
+					| PCIE_PORT_SERVICE_VC)
+
 struct pcie_device {
 	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
 	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
