===================================================================
@@ -29,6 +29,32 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
+/* If this switch is set, PCIe port native services should not be enabled. */
+bool pcie_ports_disabled;
+
+/*
+ * If this switch is set, ACPI _OSC will be used to determine whether or not to
+ * enable PCIe port native services.
+ */
+bool pcie_ports_auto = true;
+
+static int __init pcie_port_setup(char *str)
+{
+ if (!strncmp(str, "auto", 4)) {
+ pcie_ports_disabled = false;
+ pcie_ports_auto = true;
+ } else if (!strncmp(str, "native", 6)) {
+ pcie_ports_disabled = false;
+ pcie_ports_auto = false;
+ } else if (!strncmp(str, "compat", 6)) {
+ pcie_ports_disabled = true;
+ pcie_ports_auto = false;
+ }
+
+ return 1;
+}
+__setup("pcie_ports=", pcie_port_setup);
+
/* global data */
static int pcie_portdrv_restore_config(struct pci_dev *dev)
@@ -82,6 +108,7 @@ static int __devinit pcie_portdrv_probe(
dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; "
"check vendor BIOS\n", dev->vendor, dev->device);
}
+
status = pcie_port_device_register(dev);
if (status)
return status;
@@ -301,6 +328,9 @@ static int __init pcie_portdrv_init(void
{
int retval;
+ if (pcie_ports_disabled)
+ return -EACCES;
+
dmi_check_system(pcie_portdrv_dmi_table);
retval = pcie_port_bus_register();
@@ -315,11 +345,4 @@ static int __init pcie_portdrv_init(void
return retval;
}
-static void __exit pcie_portdrv_exit(void)
-{
- pci_unregister_driver(&pcie_portdriver);
- pcie_port_bus_unregister();
-}
-
module_init(pcie_portdrv_init);
-module_exit(pcie_portdrv_exit);
===================================================================
@@ -0,0 +1,87 @@
+/*
+ * PCIe Port Native Services Support, ACPI-Related Part
+ *
+ * Copyright (C) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License V2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
+#include <linux/pcieport_if.h>
+
+#include "aer/aerdrv.h"
+
+/**
+ * pcie_port_acpi_setup - Request the BIOS to release control of PCIe services.
+ * @port: PCIe Port service for a root port or event collector.
+ * @srv_mask: Bit mask of services that can be enabled for @port.
+ *
+ * Invoked when @port is identified as a PCIe port device. To avoid conflicts
+ * with the BIOS PCIe port native services support requires the BIOS to yield
+ * control of these services to the kernel. The mask of services that the BIOS
+ * allows to be enabled for @port is written to @srv_mask.
+ *
+ * NOTE: It turns out that we cannot do that for individual port services
+ * separately, because that would make some systems work incorrectly.
+ */
+int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask)
+{
+ acpi_status status;
+ acpi_handle handle;
+ u32 flags, request;
+
+ if (acpi_pci_disabled)
+ return 0;
+
+ handle = acpi_find_root_bridge_handle(port);
+ if (!handle)
+ return -EINVAL;
+
+ status = acpi_pci_osc_control_get(handle, &flags);
+ if (ACPI_FAILURE(status)) {
+ dev_dbg(&port->dev, "ACPI _OSC query failed (code %d)\n",
+ status);
+ return -ENODEV;
+ }
+
+ if (!(flags & OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)) {
+ dev_dbg(&port->dev, "BIOS refuses to grant control of PCIe "
+ "Capability Structure\n");
+ return -EACCES;
+ }
+
+ request = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL;
+ *srv_mask = PCIE_PORT_SERVICE_VC;
+ if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) {
+ request |= OSC_PCI_EXPRESS_NATIVE_HP_CONTROL;
+ *srv_mask |= PCIE_PORT_SERVICE_HP;
+ }
+ if (flags & OSC_PCI_EXPRESS_PME_CONTROL) {
+ request |= OSC_PCI_EXPRESS_PME_CONTROL;
+ *srv_mask |= PCIE_PORT_SERVICE_PME;
+ }
+
+ if (pcie_aer_get_firmware_first(port)) {
+ dev_dbg(&port->dev, "PCIe errors handled by BIOS.\n");
+ } else if (flags & OSC_PCI_EXPRESS_AER_CONTROL) {
+ request |= OSC_PCI_EXPRESS_AER_CONTROL;
+ *srv_mask |= PCIE_PORT_SERVICE_AER;
+ }
+
+ status = acpi_pci_osc_control_set(handle, request);
+ if (ACPI_FAILURE(status)) {
+ dev_dbg(&port->dev, "ACPI _OSC request failed (code %d)\n",
+ status);
+ return -ENODEV;
+ }
+
+ dev_info(&port->dev, "ACPI _OSC control granted for 0x%02x\n", request);
+
+ return 0;
+}
===================================================================
@@ -20,6 +20,9 @@
#define get_descriptor_id(type, service) (((type - 4) << 4) | service)
+extern bool pcie_ports_disabled;
+extern bool pcie_ports_auto;
+
extern struct bus_type pcie_port_bus_type;
extern int pcie_port_device_register(struct pci_dev *dev);
#ifdef CONFIG_PM
@@ -30,6 +33,8 @@ extern void pcie_port_device_remove(stru
extern int __must_check pcie_port_bus_register(void);
extern void pcie_port_bus_unregister(void);
+struct pci_dev;
+
#ifdef CONFIG_PCIE_PME
extern bool pcie_pme_msi_disabled;
@@ -42,9 +47,26 @@ static inline bool pcie_pme_no_msi(void)
{
return pcie_pme_msi_disabled;
}
+
+extern void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable);
#else /* !CONFIG_PCIE_PME */
static inline void pcie_pme_disable_msi(void) {}
static inline bool pcie_pme_no_msi(void) { return false; }
+static inline void pcie_pme_interrupt_enable(struct pci_dev *dev, bool en) {}
#endif /* !CONFIG_PCIE_PME */
+#ifdef CONFIG_ACPI
+extern int pcie_port_acpi_setup(struct pci_dev *port, int *mask);
+
+static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask)
+{
+ return pcie_port_acpi_setup(port, mask);
+}
+#else /* !CONFIG_ACPI */
+static inline int pcie_port_platform_notify(struct pci_dev *port, int *mask)
+{
+ return 0;
+}
+#endif /* !CONFIG_ACPI */
+
#endif /* _PORTDRV_H_ */
===================================================================
@@ -6,10 +6,11 @@
obj-$(CONFIG_PCIEASPM) += aspm.o
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
+pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
-obj-$(CONFIG_PCIE_PME) += pme/
+obj-$(CONFIG_PCIE_PME) += pme/pcie_pme.o
===================================================================
@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/pcieport_if.h>
+#include <linux/aer.h>
#include "../pci.h"
#include "portdrv.h"
@@ -236,24 +237,49 @@ static int get_port_device_capability(st
int services = 0, pos;
u16 reg16;
u32 reg32;
+ int cap_mask;
+ int err;
+
+ err = pcie_port_platform_notify(dev, &cap_mask);
+ if (pcie_ports_auto) {
+ if (err)
+ return 0;
+ } else {
+ cap_mask = PCIE_PORT_SERVICE_MASK;
+ }
pos = pci_pcie_cap(dev);
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, ®16);
/* Hot-Plug Capable */
- if (reg16 & PCI_EXP_FLAGS_SLOT) {
+ if ((cap_mask & PCIE_PORT_SERVICE_HP) && (reg16 & PCI_EXP_FLAGS_SLOT)) {
pci_read_config_dword(dev, pos + PCI_EXP_SLTCAP, ®32);
- if (reg32 & PCI_EXP_SLTCAP_HPC)
+ if (reg32 & PCI_EXP_SLTCAP_HPC) {
services |= PCIE_PORT_SERVICE_HP;
+ /*
+ * Disable hot-plug interrupts in case the hot-plug
+ * service driver is not loaded.
+ */
+ pos += PCI_EXP_SLTCTL;
+ pci_read_config_word(dev, pos, ®16);
+ reg16 &= ~(PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE);
+ pci_write_config_word(dev, pos, reg16);
+ }
}
/* AER capable */
- if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR))
+ if ((cap_mask & PCIE_PORT_SERVICE_AER)
+ && pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)) {
services |= PCIE_PORT_SERVICE_AER;
+ pci_disable_pcie_error_reporting(dev);
+ }
/* VC support */
if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_VC))
services |= PCIE_PORT_SERVICE_VC;
/* Root ports are capable of generating PME too */
- if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+ if ((cap_mask & PCIE_PORT_SERVICE_PME)
+ && dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
services |= PCIE_PORT_SERVICE_PME;
+ pcie_pme_interrupt_enable(dev, false);
+ }
return services;
}
@@ -494,6 +520,9 @@ static void pcie_port_shutdown_service(s
*/
int pcie_port_service_register(struct pcie_port_service_driver *new)
{
+ if (pcie_ports_disabled)
+ return -ENODEV;
+
new->driver.name = (char *)new->name;
new->driver.bus = &pcie_port_bus_type;
new->driver.probe = pcie_port_probe_service;
===================================================================
@@ -364,6 +364,40 @@ out:
EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
/**
+ * acpi_pci_osc_control_get - Get the _OSC bits the BIOS will grant control of.
+ * @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
+ * @mask: Address to store the _OSC bits mask at.
+ **/
+acpi_status acpi_pci_osc_control_get(acpi_handle handle, u32 *mask)
+{
+ acpi_status status;
+ acpi_handle tmp;
+ struct acpi_pci_root *root;
+
+ root = acpi_pci_find_root(handle);
+ if (!root)
+ return AE_NOT_EXIST;
+
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ mutex_lock(&osc_lock);
+
+ if (!root->osc_queried) {
+ status = acpi_pci_query_osc(root, root->osc_support_set);
+ if (ACPI_FAILURE(status))
+ goto out;
+ }
+
+ *mask = root->osc_control_qry;
+
+ out:
+ mutex_unlock(&osc_lock);
+ return status;
+}
+
+/**
* acpi_pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
* @flags: driver's requested control bits
@@ -377,10 +411,6 @@ acpi_status acpi_pci_osc_control_set(acp
acpi_handle tmp;
struct acpi_pci_root *root;
- status = acpi_get_handle(handle, "_OSC", &tmp);
- if (ACPI_FAILURE(status))
- return status;
-
control_req = (flags & OSC_PCI_CONTROL_MASKS);
if (!control_req)
return AE_TYPE;
@@ -389,6 +419,10 @@ acpi_status acpi_pci_osc_control_set(acp
if (!root)
return AE_NOT_EXIST;
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
mutex_lock(&osc_lock);
/* No need to evaluate _OSC if the control was already granted. */
if ((root->osc_control_set & control_req) == control_req)
@@ -401,8 +435,8 @@ acpi_status acpi_pci_osc_control_set(acp
goto out;
}
if ((root->osc_control_qry & control_req) != control_req) {
- printk(KERN_DEBUG
- "Firmware did not grant requested _OSC control\n");
+ pr_info("ACPI: Requested _OSC control for unsupported mask "
+ "0x%02x\n", control_req);
status = AE_SUPPORT;
goto out;
}
===================================================================
@@ -24,37 +24,12 @@
#include <linux/pm_runtime.h>
#include "../../pci.h"
-#include "pcie_pme.h"
+#include "../portdrv.h"
#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
/*
- * If set, this switch will prevent the PCIe root port PME service driver from
- * being registered. Consequently, the interrupt-based PCIe PME signaling will
- * not be used by any PCIe root ports in that case.
- */
-static bool pcie_pme_disabled = true;
-
-/*
- * The PCI Express Base Specification 2.0, Section 6.1.8, states the following:
- * "In order to maintain compatibility with non-PCI Express-aware system
- * software, system power management logic must be configured by firmware to use
- * the legacy mechanism of signaling PME by default. PCI Express-aware system
- * software must notify the firmware prior to enabling native, interrupt-based
- * PME signaling." However, if the platform doesn't provide us with a suitable
- * notification mechanism or the notification fails, it is not clear whether or
- * not we are supposed to use the interrupt-based PCIe PME signaling. The
- * switch below can be used to indicate the desired behaviour. When set, it
- * will make the kernel use the interrupt-based PCIe PME signaling regardless of
- * the platform notification status, although the kernel will attempt to notify
- * the platform anyway. When unset, it will prevent the kernel from using the
- * the interrupt-based PCIe PME signaling if the platform notification fails,
- * which is the default.
- */
-static bool pcie_pme_force_enable;
-
-/*
* If this switch is set, MSI will not be used for PCIe PME signaling. This
* causes the PCIe port driver to use INTx interrupts only, but it turns out
* that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based
@@ -64,38 +39,13 @@ bool pcie_pme_msi_disabled;
static int __init pcie_pme_setup(char *str)
{
- if (!strncmp(str, "auto", 4))
- pcie_pme_disabled = false;
- else if (!strncmp(str, "force", 5))
- pcie_pme_force_enable = true;
-
- str = strchr(str, ',');
- if (str) {
- str++;
- str += strspn(str, " \t");
- if (*str && !strcmp(str, "nomsi"))
- pcie_pme_msi_disabled = true;
- }
+ if (!strncmp(str, "nomsi", 5))
+ pcie_pme_msi_disabled = true;
return 1;
}
__setup("pcie_pme=", pcie_pme_setup);
-/**
- * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME.
- * @srv: PCIe PME root port service to use for carrying out the check.
- *
- * Notify the platform that the native PCIe PME is going to be used and return
- * 'true' if the control of the PCIe PME registers has been acquired from the
- * platform.
- */
-static bool pcie_pme_platform_setup(struct pcie_device *srv)
-{
- if (!pcie_pme_platform_notify(srv))
- return true;
- return pcie_pme_force_enable;
-}
-
struct pcie_pme_service_data {
spinlock_t lock;
struct pcie_device *srv;
@@ -108,7 +58,7 @@ struct pcie_pme_service_data {
* @dev: PCIe root port or event collector.
* @enable: Enable or disable the interrupt.
*/
-static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
+void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable)
{
int rtctl_pos;
u16 rtctl;
@@ -417,9 +367,6 @@ static int pcie_pme_probe(struct pcie_de
struct pcie_pme_service_data *data;
int ret;
- if (!pcie_pme_platform_setup(srv))
- return -EACCES;
-
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -509,8 +456,7 @@ static struct pcie_port_service_driver p
*/
static int __init pcie_pme_service_init(void)
{
- return pcie_pme_disabled ?
- -ENODEV : pcie_port_service_register(&pcie_pme_driver);
+ return pcie_port_service_register(&pcie_pme_driver);
}
module_init(pcie_pme_service_init);
===================================================================
@@ -1,28 +0,0 @@
-/*
- * drivers/pci/pcie/pme/pcie_pme.h
- *
- * PCI Express Root Port PME signaling support
- *
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- */
-
-#ifndef _PCIE_PME_H_
-#define _PCIE_PME_H_
-
-struct pcie_device;
-
-#ifdef CONFIG_ACPI
-extern int pcie_pme_acpi_setup(struct pcie_device *srv);
-
-static inline int pcie_pme_platform_notify(struct pcie_device *srv)
-{
- return pcie_pme_acpi_setup(srv);
-}
-#else /* !CONFIG_ACPI */
-static inline int pcie_pme_platform_notify(struct pcie_device *srv)
-{
- return 0;
-}
-#endif /* !CONFIG_ACPI */
-
-#endif
===================================================================
@@ -1,54 +0,0 @@
-/*
- * PCIe Native PME support, ACPI-related part
- *
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License V2. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <linux/pcieport_if.h>
-
-/**
- * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME.
- * @srv - PCIe PME service for a root port or event collector.
- *
- * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid
- * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME
- * control to the kernel.
- */
-int pcie_pme_acpi_setup(struct pcie_device *srv)
-{
- acpi_status status = AE_NOT_FOUND;
- struct pci_dev *port = srv->port;
- acpi_handle handle;
- int error = 0;
-
- if (acpi_pci_disabled)
- return -ENOSYS;
-
- dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n");
-
- handle = acpi_find_root_bridge_handle(port);
- if (!handle)
- return -EINVAL;
-
- status = acpi_pci_osc_control_set(handle,
- OSC_PCI_EXPRESS_PME_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
- if (ACPI_FAILURE(status)) {
- dev_info(&port->dev,
- "Failed to receive control of PCIe PME service: %s\n",
- (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
- "no _OSC support" : "ACPI _OSC failed");
- error = -ENODEV;
- }
-
- return error;
-}
===================================================================
@@ -1,8 +0,0 @@
-#
-# Makefile for PCI-Express Root Port PME signaling driver
-#
-
-obj-$(CONFIG_PCIE_PME) += pmedriver.o
-
-pmedriver-objs := pcie_pme.o
-pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o
===================================================================
@@ -19,42 +19,6 @@
#include <acpi/apei.h>
#include "aerdrv.h"
-/**
- * aer_osc_setup - run ACPI _OSC method
- * @pciedev: pcie_device which AER is being enabled on
- *
- * @return: Zero on success. Nonzero otherwise.
- *
- * Invoked when PCIe bus loads AER service driver. To avoid conflict with
- * BIOS AER support requires BIOS to yield AER control to OS native driver.
- **/
-int aer_osc_setup(struct pcie_device *pciedev)
-{
- acpi_status status = AE_NOT_FOUND;
- struct pci_dev *pdev = pciedev->port;
- acpi_handle handle = NULL;
-
- if (acpi_pci_disabled)
- return -1;
-
- handle = acpi_find_root_bridge_handle(pdev);
- if (handle) {
- status = acpi_pci_osc_control_set(handle,
- OSC_PCI_EXPRESS_AER_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
- }
-
- if (ACPI_FAILURE(status)) {
- dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't "
- "init device: %s\n",
- (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
- "no _OSC support" : "_OSC failed");
- return -1;
- }
-
- return 0;
-}
-
#ifdef CONFIG_ACPI_APEI
static inline int hest_match_pci(struct acpi_hest_aer_common *p,
struct pci_dev *pci)
===================================================================
@@ -771,22 +771,10 @@ void aer_isr(struct work_struct *work)
*/
int aer_init(struct pcie_device *dev)
{
- if (pcie_aer_get_firmware_first(dev->port)) {
- dev_printk(KERN_DEBUG, &dev->device,
- "PCIe errors handled by platform firmware.\n");
- goto out;
- }
-
- if (aer_osc_setup(dev))
- goto out;
-
- return 0;
-out:
if (forceload) {
dev_printk(KERN_DEBUG, &dev->device,
"aerdrv forceload requested.\n");
pcie_aer_force_firmware_first(dev->port, 0);
- return 0;
}
- return -ENXIO;
+ return 0;
}
===================================================================
@@ -338,9 +338,7 @@ int acpi_get_hp_hw_control_from_firmware
acpi_handle chandle, handle;
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
- flags &= (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
- OSC_SHPC_NATIVE_HP_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ flags &= OSC_SHPC_NATIVE_HP_CONTROL;
if (!flags) {
err("Invalid flags %u specified!\n", flags);
return -EINVAL;
===================================================================
@@ -176,19 +176,7 @@ static inline void pciehp_firmware_init(
{
pciehp_acpi_slot_detection_init();
}
-
-static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
- int retval;
- u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
- retval = acpi_get_hp_hw_control_from_firmware(dev, flags);
- if (retval)
- return retval;
- return pciehp_acpi_slot_detection_check(dev);
-}
#else
#define pciehp_firmware_init() do {} while (0)
-#define pciehp_get_hp_hw_control_from_firmware(dev) 0
#endif /* CONFIG_ACPI */
#endif /* _PCIEHP_H */
===================================================================
@@ -59,7 +59,7 @@ module_param(pciehp_force, bool, 0644);
MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
+MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if OSHP is missing");
#define PCIE_MODULE_NAME "pciehp"
@@ -235,7 +235,7 @@ static int pciehp_probe(struct pcie_devi
dev_info(&dev->device,
"Bypassing BIOS check for pciehp use on %s\n",
pci_name(dev->port));
- else if (pciehp_get_hp_hw_control_from_firmware(dev->port))
+ else if (pciehp_acpi_slot_detection_check(dev->port))
goto err_out_none;
ctrl = pcie_init(dev);
===================================================================
@@ -85,9 +85,7 @@ static int __init dummy_probe(struct pci
acpi_handle handle;
struct dummy_slot *slot, *tmp;
struct pci_dev *pdev = dev->port;
- /* Note: pciehp_detect_mode != PCIEHP_DETECT_ACPI here */
- if (pciehp_get_hp_hw_control_from_firmware(pdev))
- return -ENODEV;
+
pos = pci_pcie_cap(pdev);
if (!pos)
return -ENODEV;
===================================================================
@@ -2047,15 +2047,18 @@ and is between 256 and 4096 characters.
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_ports= [PCIE] PCIe ports handling:
+ auto Ask the BIOS whether or not to use native PCIe services
+ associated with PCIe ports (PME, hot-plug, AER). Use
+ them only if that is allowed by the BIOS.
+ native Use native PCIe services associated with PCIe ports
+ unconditionally.
+ compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+ ports driver.
+
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
- Format: {auto|force}[,nomsi]
- auto Use native PCIe PME signaling if the BIOS allows the
- kernel to control PCIe config registers of root ports.
- force Use native PCIe PME signaling even if the BIOS refuses
- to allow the kernel to control the relevant PCIe config
- registers.
nomsi Do not use MSI for native PCIe PME signaling (this makes
- all PCIe root ports use INTx for everything).
+ all PCIe root ports use INTx for all services).
pcmv= [HW,PCMCIA] BadgePAD 4
===================================================================
@@ -305,6 +305,7 @@ acpi_status acpi_run_osc(acpi_handle han
OSC_PCI_EXPRESS_AER_CONTROL | \
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
+extern acpi_status acpi_pci_osc_control_get(acpi_handle handle, u32 *mask);
extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
extern void acpi_early_init(void);
===================================================================
@@ -22,6 +22,11 @@
#define PCIE_PORT_SERVICE_VC_SHIFT 3 /* Virtual Channel */
#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT)
+#define PCIE_PORT_SERVICE_MASK (PCIE_PORT_SERVICE_PME \
+ | PCIE_PORT_SERVICE_AER \
+ | PCIE_PORT_SERVICE_HP \
+ | PCIE_PORT_SERVICE_VC)
+
struct pcie_device {
int irq; /* Service IRQ/MSI/MSI-X Vector */
struct pci_dev *port; /* Root/Upstream/Downstream Port */