@@ -5,6 +5,7 @@
obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
obj-$(CONFIG_I2C) += i2c-core.o
i2c-core-objs := i2c-core-base.o
+i2c-core-$(CONFIG_I2C_SLAVE) += i2c-core-slave.o
obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
@@ -24,7 +24,6 @@
(c) 2013 Wolfram Sang <wsa@the-dreams.de>
I2C ACPI code Copyright (C) 2014 Intel Corp
Author: Lan Tianyu <tianyu.lan@intel.com>
- I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
*/
#define pr_fmt(fmt) "i2c-core: " fmt
@@ -1213,7 +1212,7 @@ static int i2c_check_addr_validity(unsigned addr, unsigned short flags)
* device uses a reserved address, then it shouldn't be probed. 7-bit
* addressing is assumed, 10-bit address devices are rare and should be
* explicitly enumerated. */
-static int i2c_check_7bit_addr_validity_strict(unsigned short addr)
+int i2c_check_7bit_addr_validity_strict(unsigned short addr)
{
/*
* Reserved addresses per I2C specification:
@@ -3727,105 +3726,6 @@ s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
}
EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
-int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
-{
- int ret;
-
- if (!client || !slave_cb) {
- WARN(1, "insufficient data\n");
- return -EINVAL;
- }
-
- if (!(client->flags & I2C_CLIENT_SLAVE))
- dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
- __func__);
-
- if (!(client->flags & I2C_CLIENT_TEN)) {
- /* Enforce stricter address checking */
- ret = i2c_check_7bit_addr_validity_strict(client->addr);
- if (ret) {
- dev_err(&client->dev, "%s: invalid address\n", __func__);
- return ret;
- }
- }
-
- if (!client->adapter->algo->reg_slave) {
- dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
- return -EOPNOTSUPP;
- }
-
- client->slave_cb = slave_cb;
-
- i2c_lock_adapter(client->adapter);
- ret = client->adapter->algo->reg_slave(client);
- i2c_unlock_adapter(client->adapter);
-
- if (ret) {
- client->slave_cb = NULL;
- dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_register);
-
-int i2c_slave_unregister(struct i2c_client *client)
-{
- int ret;
-
- if (!client->adapter->algo->unreg_slave) {
- dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
- return -EOPNOTSUPP;
- }
-
- i2c_lock_adapter(client->adapter);
- ret = client->adapter->algo->unreg_slave(client);
- i2c_unlock_adapter(client->adapter);
-
- if (ret == 0)
- client->slave_cb = NULL;
- else
- dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_unregister);
-
-/**
- * i2c_detect_slave_mode - detect operation mode
- * @dev: The device owning the bus
- *
- * This checks the device nodes for an I2C slave by checking the address
- * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
- * flag this means the device is configured to act as a I2C slave and it will
- * be listening at that address.
- *
- * Returns true if an I2C own slave address is detected, otherwise returns
- * false.
- */
-bool i2c_detect_slave_mode(struct device *dev)
-{
- if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
- struct device_node *child;
- u32 reg;
-
- for_each_child_of_node(dev->of_node, child) {
- of_property_read_u32(child, "reg", ®);
- if (reg & I2C_OWN_SLAVE_ADDRESS) {
- of_node_put(child);
- return true;
- }
- }
- } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
- dev_dbg(dev, "ACPI slave is not supported yet\n");
- }
- return false;
-}
-EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
-
-#endif
-
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,115 @@
+/*
+ * Linux I2C core slave support code
+ *
+ * Copyright (C) 2014 by Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include "i2c-core.h"
+
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
+{
+ int ret;
+
+ if (!client || !slave_cb) {
+ WARN(1, "insufficient data\n");
+ return -EINVAL;
+ }
+
+ if (!(client->flags & I2C_CLIENT_SLAVE))
+ dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
+ __func__);
+
+ if (!(client->flags & I2C_CLIENT_TEN)) {
+ /* Enforce stricter address checking */
+ ret = i2c_check_7bit_addr_validity_strict(client->addr);
+ if (ret) {
+ dev_err(&client->dev, "%s: invalid address\n", __func__);
+ return ret;
+ }
+ }
+
+ if (!client->adapter->algo->reg_slave) {
+ dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ client->slave_cb = slave_cb;
+
+ i2c_lock_adapter(client->adapter);
+ ret = client->adapter->algo->reg_slave(client);
+ i2c_unlock_adapter(client->adapter);
+
+ if (ret) {
+ client->slave_cb = NULL;
+ dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_register);
+
+int i2c_slave_unregister(struct i2c_client *client)
+{
+ int ret;
+
+ if (!client->adapter->algo->unreg_slave) {
+ dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ i2c_lock_adapter(client->adapter);
+ ret = client->adapter->algo->unreg_slave(client);
+ i2c_unlock_adapter(client->adapter);
+
+ if (ret == 0)
+ client->slave_cb = NULL;
+ else
+ dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+
+/**
+ * i2c_detect_slave_mode - detect operation mode
+ * @dev: The device owning the bus
+ *
+ * This checks the device nodes for an I2C slave by checking the address
+ * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
+ * flag this means the device is configured to act as a I2C slave and it will
+ * be listening at that address.
+ *
+ * Returns true if an I2C own slave address is detected, otherwise returns
+ * false.
+ */
+bool i2c_detect_slave_mode(struct device *dev)
+{
+ if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
+ struct device_node *child;
+ u32 reg;
+
+ for_each_child_of_node(dev->of_node, child) {
+ of_property_read_u32(child, "reg", ®);
+ if (reg & I2C_OWN_SLAVE_ADDRESS) {
+ of_node_put(child);
+ return true;
+ }
+ }
+ } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
+ dev_dbg(dev, "ACPI slave is not supported yet\n");
+ }
+ return false;
+}
+EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
@@ -27,3 +27,4 @@ extern struct rw_semaphore __i2c_board_lock;
extern struct list_head __i2c_board_list;
extern int __i2c_first_dynamic_bus_num;
+int i2c_check_7bit_addr_validity_strict(unsigned short addr);
Also removes some ifdeffery. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> --- drivers/i2c/Makefile | 1 + drivers/i2c/i2c-core-base.c | 102 +------------------------------------- drivers/i2c/i2c-core-slave.c | 115 +++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-core.h | 1 + 4 files changed, 118 insertions(+), 101 deletions(-) create mode 100644 drivers/i2c/i2c-core-slave.c