| Message ID | 20180913143322.77953-11-mika.westerberg@linux.intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | PCI: Allow D3cold for PCIe hierarchies | expand |
On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote: > In order to have better power management for Thunderbolt PCIe chains, > Windows enables power management for native PCIe hotplug ports if there > is following ACPI _DSD attached to the root port: > > Name (_DSD, Package () { > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), > Package () { > Package () {"HotPlugSupportInD3", 1} > } > }) > > This is also documented in: > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 This doc basically says that if the platform supplies this _DSD, the root port is "capable of handling hot plug events while in D3 state". What does that mean? That statement is not really actionable. I *assume* it's telling us about some specific hardware or firmware functionality, like maybe we'll get a notification for hotplug events when the device is in D3? D3hot? D3cold? What is the notification? Is it immediate or when the device comes back to D0? How do we control and field the notification? > Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) > and then implement it for ACPI based systems so that the above property is > checked. > > There is one catch, though. The initial pci_dev->bridge_d3 is set before > the root port has ACPI companion bound (the device is not added to the > PCI bus either) so we need to look up the ACPI companion manually in > that case in acpi_pci_bridge_d3(). > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > drivers/acpi/property.c | 3 +++ > drivers/pci/pci-acpi.c | 41 +++++++++++++++++++++++++++++++++++++++++ > drivers/pci/pci.c | 9 +++++++++ > drivers/pci/pci.h | 3 +++ > 4 files changed, 56 insertions(+) > > diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c > index 90ba9371bae6..8c7c4583b52d 100644 > --- a/drivers/acpi/property.c > +++ b/drivers/acpi/property.c > @@ -28,6 +28,9 @@ static const guid_t prp_guids[] = { > /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ > GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, > 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), > + /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ > + GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, > + 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), > }; > > static const guid_t ads_guid = > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > index f8436d1c4d45..c8d0549580f4 100644 > --- a/drivers/pci/pci-acpi.c > +++ b/drivers/pci/pci-acpi.c > @@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) > return PCI_POWER_ERROR; > } > > +static struct acpi_device *acpi_pci_find_companion(struct device *dev); > + > +static bool acpi_pci_bridge_d3(struct pci_dev *dev) > +{ > + const struct fwnode_handle *fwnode; > + struct acpi_device *adev; > + struct pci_dev *root; > + u8 val; > + > + if (!dev->is_hotplug_bridge) > + return false; > + > + /* > + * Look for a special _DSD property for the root port and if it > + * is set we know the hierarchy behind it supports D3 just fine. > + */ > + root = pci_find_pcie_root_port(dev); > + if (!root) > + return false; > + > + adev = ACPI_COMPANION(&root->dev); > + if (root == dev) { > + /* > + * It is possible that the ACPI companion is not yet bound > + * for the root port so look it up manually here. > + */ > + if (!adev && !pci_dev_is_added(root)) > + adev = acpi_pci_find_companion(&root->dev); > + } > + > + if (!adev) > + return false; > + > + fwnode = acpi_fwnode_handle(adev); > + if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val)) > + return false; > + > + return val == 1; > +} > + > static bool acpi_pci_power_manageable(struct pci_dev *dev) > { > struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > @@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) > } > > static const struct pci_platform_pm_ops acpi_pci_platform_pm = { > + .bridge_d3 = acpi_pci_bridge_d3, > .is_manageable = acpi_pci_power_manageable, > .set_state = acpi_pci_set_power_state, > .get_state = acpi_pci_get_power_state, > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 1af6f1887986..b1b3052f15dc 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -791,6 +791,11 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) > return pci_platform_pm ? pci_platform_pm->need_resume(dev) : false; > } > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) > +{ > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; This patch added a .bridge_d3() implementation for ACPI but not for MID. What prevents us from calling platform_pci_bridge_d3() on a MID platform and trying to call through a NULL pointer? Shouldn't we do something like the patch attached below? > +} > + > /** > * pci_raw_set_power_state - Use PCI PM registers to set the power state of > * given PCI device > @@ -2514,6 +2519,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > if (bridge->is_thunderbolt) > return true; > > + /* Platform might know better if the bridge supports D3 */ > + if (platform_pci_bridge_d3(bridge)) > + return true; *All* devices trivially support D3. Obviously we're trying to learn something else here. What is it? > /* > * Hotplug ports handled natively by the OS were not validated > * by vendors for runtime D3 at least until 2018 because there > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 6e0d1528d471..66fd5c1bf71b 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -39,6 +39,8 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > /** > * struct pci_platform_pm_ops - Firmware PM callbacks > * > + * @bridge_d3: Does the bridge allow entering into D3 > + * > * @is_manageable: returns 'true' if given device is power manageable by the > * platform firmware > * > @@ -60,6 +62,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > * these callbacks are mandatory. > */ > struct pci_platform_pm_ops { > + bool (*bridge_d3)(struct pci_dev *dev); > bool (*is_manageable)(struct pci_dev *dev); > int (*set_state)(struct pci_dev *dev, pci_power_t state); > pci_power_t (*get_state)(struct pci_dev *dev); > -- diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c index aafd58da3a89..0bacd45b30d6 100644 --- a/drivers/pci/pci-mid.c +++ b/drivers/pci/pci-mid.c @@ -16,6 +16,11 @@ #include "pci.h" +static bool mid_pci_bridge_d3(struct pci_dev *dev) +{ + return false; +} + static bool mid_pci_power_manageable(struct pci_dev *dev) { return true; @@ -47,6 +52,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) } static const struct pci_platform_pm_ops mid_pci_platform_pm = { + .bridge_d3 = mid_pci_bridge_d3, .is_manageable = mid_pci_power_manageable, .set_state = mid_pci_set_power_state, .get_state = mid_pci_get_power_state, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 595fcf59843f..fa837e88ea07 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -820,8 +820,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) { - if (!ops->is_manageable || !ops->set_state || !ops->get_state || - !ops->choose_state || !ops->set_wakeup || !ops->need_resume) + if (!ops->bridge_d3 || !ops->is_manageable || !ops->set_state || + !ops->get_state || !ops->choose_state || !ops->set_wakeup || + !ops->need_resume) return -EINVAL; pci_platform_pm = ops; return 0;
On Tue, Apr 07, 2020 at 06:54:23PM -0500, Bjorn Helgaas wrote: > On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote: > > In order to have better power management for Thunderbolt PCIe chains, > > Windows enables power management for native PCIe hotplug ports if there > > is following ACPI _DSD attached to the root port: > > > > Name (_DSD, Package () { > > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), > > Package () { > > Package () {"HotPlugSupportInD3", 1} > > } > > }) > > > > This is also documented in: > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 > > This doc basically says that if the platform supplies this _DSD, the > root port is "capable of handling hot plug events while in D3 state". > > What does that mean? That statement is not really actionable. I > *assume* it's telling us about some specific hardware or firmware > functionality, like maybe we'll get a notification for hotplug events > when the device is in D3? D3hot? D3cold? What is the notification? > Is it immediate or when the device comes back to D0? How do we > control and field the notification? I think it simply gives the OS a hint that it can put PCIe hotplug capable port into D3 and expect it to wake up when device is detected. > > Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) > > and then implement it for ACPI based systems so that the above property is > > checked. > > > > There is one catch, though. The initial pci_dev->bridge_d3 is set before > > the root port has ACPI companion bound (the device is not added to the > > PCI bus either) so we need to look up the ACPI companion manually in > > that case in acpi_pci_bridge_d3(). > > > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > --- > > drivers/acpi/property.c | 3 +++ > > drivers/pci/pci-acpi.c | 41 +++++++++++++++++++++++++++++++++++++++++ > > drivers/pci/pci.c | 9 +++++++++ > > drivers/pci/pci.h | 3 +++ > > 4 files changed, 56 insertions(+) > > > > diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c > > index 90ba9371bae6..8c7c4583b52d 100644 > > --- a/drivers/acpi/property.c > > +++ b/drivers/acpi/property.c > > @@ -28,6 +28,9 @@ static const guid_t prp_guids[] = { > > /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ > > GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, > > 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), > > + /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ > > + GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, > > + 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), > > }; > > > > static const guid_t ads_guid = > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > > index f8436d1c4d45..c8d0549580f4 100644 > > --- a/drivers/pci/pci-acpi.c > > +++ b/drivers/pci/pci-acpi.c > > @@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) > > return PCI_POWER_ERROR; > > } > > > > +static struct acpi_device *acpi_pci_find_companion(struct device *dev); > > + > > +static bool acpi_pci_bridge_d3(struct pci_dev *dev) > > +{ > > + const struct fwnode_handle *fwnode; > > + struct acpi_device *adev; > > + struct pci_dev *root; > > + u8 val; > > + > > + if (!dev->is_hotplug_bridge) > > + return false; > > + > > + /* > > + * Look for a special _DSD property for the root port and if it > > + * is set we know the hierarchy behind it supports D3 just fine. > > + */ > > + root = pci_find_pcie_root_port(dev); > > + if (!root) > > + return false; > > + > > + adev = ACPI_COMPANION(&root->dev); > > + if (root == dev) { > > + /* > > + * It is possible that the ACPI companion is not yet bound > > + * for the root port so look it up manually here. > > + */ > > + if (!adev && !pci_dev_is_added(root)) > > + adev = acpi_pci_find_companion(&root->dev); > > + } > > + > > + if (!adev) > > + return false; > > + > > + fwnode = acpi_fwnode_handle(adev); > > + if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val)) > > + return false; > > + > > + return val == 1; > > +} > > + > > static bool acpi_pci_power_manageable(struct pci_dev *dev) > > { > > struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > > @@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) > > } > > > > static const struct pci_platform_pm_ops acpi_pci_platform_pm = { > > + .bridge_d3 = acpi_pci_bridge_d3, > > .is_manageable = acpi_pci_power_manageable, > > .set_state = acpi_pci_set_power_state, > > .get_state = acpi_pci_get_power_state, > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 1af6f1887986..b1b3052f15dc 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -791,6 +791,11 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) > > return pci_platform_pm ? pci_platform_pm->need_resume(dev) : false; > > } > > > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) > > +{ > > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; > > This patch added a .bridge_d3() implementation for ACPI but not for > MID. What prevents us from calling platform_pci_bridge_d3() on a MID > platform and trying to call through a NULL pointer? > > Shouldn't we do something like the patch attached below? IIRC MID devices in general don't have PCIe ports (so we never enable PM for them). Is this a real problem that crashes peoples kernels on MID systems? Then yes I think the patch makes sense to have. I also remember testing some other stuff on one MID system (Edison) quite recently and did not see any issues. > > +} > > + > > /** > > * pci_raw_set_power_state - Use PCI PM registers to set the power state of > > * given PCI device > > @@ -2514,6 +2519,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > > if (bridge->is_thunderbolt) > > return true; > > > > + /* Platform might know better if the bridge supports D3 */ > > + if (platform_pci_bridge_d3(bridge)) > > + return true; > > *All* devices trivially support D3. Obviously we're trying to learn > something else here. What is it? D3 has been problematic with hotplug bridges which is the reason we have not put them in D3 until recently (and still don't do that for ACPI hotplug bridges). BTW, this patch was merged over a year ago so I'm not sure why you comment it now. Or you want me to add incremental changes to it? > > /* > > * Hotplug ports handled natively by the OS were not validated > > * by vendors for runtime D3 at least until 2018 because there > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > > index 6e0d1528d471..66fd5c1bf71b 100644 > > --- a/drivers/pci/pci.h > > +++ b/drivers/pci/pci.h > > @@ -39,6 +39,8 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > /** > > * struct pci_platform_pm_ops - Firmware PM callbacks > > * > > + * @bridge_d3: Does the bridge allow entering into D3 > > + * > > * @is_manageable: returns 'true' if given device is power manageable by the > > * platform firmware > > * > > @@ -60,6 +62,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > * these callbacks are mandatory. > > */ > > struct pci_platform_pm_ops { > > + bool (*bridge_d3)(struct pci_dev *dev); > > bool (*is_manageable)(struct pci_dev *dev); > > int (*set_state)(struct pci_dev *dev, pci_power_t state); > > pci_power_t (*get_state)(struct pci_dev *dev); > > -- > > > diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c > index aafd58da3a89..0bacd45b30d6 100644 > --- a/drivers/pci/pci-mid.c > +++ b/drivers/pci/pci-mid.c > @@ -16,6 +16,11 @@ > > #include "pci.h" > > +static bool mid_pci_bridge_d3(struct pci_dev *dev) > +{ > + return false; > +} > + > static bool mid_pci_power_manageable(struct pci_dev *dev) > { > return true; > @@ -47,6 +52,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) > } > > static const struct pci_platform_pm_ops mid_pci_platform_pm = { > + .bridge_d3 = mid_pci_bridge_d3, > .is_manageable = mid_pci_power_manageable, > .set_state = mid_pci_set_power_state, > .get_state = mid_pci_get_power_state, > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 595fcf59843f..fa837e88ea07 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -820,8 +820,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; > > int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) > { > - if (!ops->is_manageable || !ops->set_state || !ops->get_state || > - !ops->choose_state || !ops->set_wakeup || !ops->need_resume) > + if (!ops->bridge_d3 || !ops->is_manageable || !ops->set_state || > + !ops->get_state || !ops->choose_state || !ops->set_wakeup || > + !ops->need_resume) > return -EINVAL; > pci_platform_pm = ops; > return 0;
On Wed, Apr 08, 2020 at 09:04:09AM +0300, Mika Westerberg wrote: > On Tue, Apr 07, 2020 at 06:54:23PM -0500, Bjorn Helgaas wrote: > > On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote: > > > In order to have better power management for Thunderbolt PCIe chains, > > > Windows enables power management for native PCIe hotplug ports if there > > > is following ACPI _DSD attached to the root port: > > > > > > Name (_DSD, Package () { > > > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), > > > Package () { > > > Package () {"HotPlugSupportInD3", 1} > > > } > > > }) > > > > > > This is also documented in: > > > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 > > > > This doc basically says that if the platform supplies this _DSD, the > > root port is "capable of handling hot plug events while in D3 state". > > > > What does that mean? That statement is not really actionable. I > > *assume* it's telling us about some specific hardware or firmware > > functionality, like maybe we'll get a notification for hotplug events > > when the device is in D3? D3hot? D3cold? What is the notification? > > Is it immediate or when the device comes back to D0? How do we > > control and field the notification? > > I think it simply gives the OS a hint that it can put PCIe hotplug > capable port into D3 and expect it to wake up when device is detected. I'd really like more specific details than this. PCI power management is explicitly controlled by software, so I don't know what it means for a bridge to "wake up when device is detected." Normally Linux would get some kind of notification like a PME, then execute an ACPI method and/or write PCI_PM_CTRL to put the device back in D0. Are we talking about D3hot or D3cold? The PCI PM capability already has a way to advertise that it can generate PME from D3cold. How is this different from that? Is this _DSD something that *could* be advertised via PCI config space, i.e., is it completely determined by the Root Port? Or is it something that requires ACPI support, so it cannot be done directly by the hardware device? These are all things we need to know in order to make power management reliable. > > > Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) > > > and then implement it for ACPI based systems so that the above property is > > > checked. > > > > > > There is one catch, though. The initial pci_dev->bridge_d3 is set before > > > the root port has ACPI companion bound (the device is not added to the > > > PCI bus either) so we need to look up the ACPI companion manually in > > > that case in acpi_pci_bridge_d3(). > > > > > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > --- > > > drivers/acpi/property.c | 3 +++ > > > drivers/pci/pci-acpi.c | 41 +++++++++++++++++++++++++++++++++++++++++ > > > drivers/pci/pci.c | 9 +++++++++ > > > drivers/pci/pci.h | 3 +++ > > > 4 files changed, 56 insertions(+) > > > > > > diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c > > > index 90ba9371bae6..8c7c4583b52d 100644 > > > --- a/drivers/acpi/property.c > > > +++ b/drivers/acpi/property.c > > > @@ -28,6 +28,9 @@ static const guid_t prp_guids[] = { > > > /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ > > > GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, > > > 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), > > > + /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ > > > + GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, > > > + 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), > > > }; > > > > > > static const guid_t ads_guid = > > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > > > index f8436d1c4d45..c8d0549580f4 100644 > > > --- a/drivers/pci/pci-acpi.c > > > +++ b/drivers/pci/pci-acpi.c > > > @@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) > > > return PCI_POWER_ERROR; > > > } > > > > > > +static struct acpi_device *acpi_pci_find_companion(struct device *dev); > > > + > > > +static bool acpi_pci_bridge_d3(struct pci_dev *dev) > > > +{ > > > + const struct fwnode_handle *fwnode; > > > + struct acpi_device *adev; > > > + struct pci_dev *root; > > > + u8 val; > > > + > > > + if (!dev->is_hotplug_bridge) > > > + return false; > > > + > > > + /* > > > + * Look for a special _DSD property for the root port and if it > > > + * is set we know the hierarchy behind it supports D3 just fine. > > > + */ > > > + root = pci_find_pcie_root_port(dev); > > > + if (!root) > > > + return false; > > > + > > > + adev = ACPI_COMPANION(&root->dev); > > > + if (root == dev) { > > > + /* > > > + * It is possible that the ACPI companion is not yet bound > > > + * for the root port so look it up manually here. > > > + */ > > > + if (!adev && !pci_dev_is_added(root)) > > > + adev = acpi_pci_find_companion(&root->dev); > > > + } > > > + > > > + if (!adev) > > > + return false; > > > + > > > + fwnode = acpi_fwnode_handle(adev); > > > + if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val)) > > > + return false; > > > + > > > + return val == 1; > > > +} > > > + > > > static bool acpi_pci_power_manageable(struct pci_dev *dev) > > > { > > > struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > > > @@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) > > > } > > > > > > static const struct pci_platform_pm_ops acpi_pci_platform_pm = { > > > + .bridge_d3 = acpi_pci_bridge_d3, > > > .is_manageable = acpi_pci_power_manageable, > > > .set_state = acpi_pci_set_power_state, > > > .get_state = acpi_pci_get_power_state, > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index 1af6f1887986..b1b3052f15dc 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -791,6 +791,11 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) > > > return pci_platform_pm ? pci_platform_pm->need_resume(dev) : false; > > > } > > > > > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) > > > +{ > > > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; > > > > This patch added a .bridge_d3() implementation for ACPI but not for > > MID. What prevents us from calling platform_pci_bridge_d3() on a MID > > platform and trying to call through a NULL pointer? > > > > Shouldn't we do something like the patch attached below? > > IIRC MID devices in general don't have PCIe ports (so we never enable PM > for them). Is this a real problem that crashes peoples kernels on MID > systems? Then yes I think the patch makes sense to have. > > I also remember testing some other stuff on one MID system (Edison) > quite recently and did not see any issues. I have not seen reports of crashes, but I do think this is a real problem. The problem is that the code as-is relies on assumptions ("MID does not have PCI and never will") that are implicit and impossible to verify, which is a maintenance problem. > > > +} > > > + > > > /** > > > * pci_raw_set_power_state - Use PCI PM registers to set the power state of > > > * given PCI device > > > @@ -2514,6 +2519,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > > > if (bridge->is_thunderbolt) > > > return true; > > > > > > + /* Platform might know better if the bridge supports D3 */ > > > + if (platform_pci_bridge_d3(bridge)) > > > + return true; > > > > *All* devices trivially support D3. Obviously we're trying to learn > > something else here. What is it? > > D3 has been problematic with hotplug bridges which is the reason we have > not put them in D3 until recently (and still don't do that for ACPI > hotplug bridges). > > BTW, this patch was merged over a year ago so I'm not sure why you comment > it now. Or you want me to add incremental changes to it? I was reviewing [1], which updates pci_find_pcie_root_port(), which is used by acpi_pci_bridge_d3(). I noticed a potential NULL pointer dereference, which was a distraction. Unless you object, I'll merge something like the patch below to prevent that distraction for others. [1] https://lore.kernel.org/r/1586262717-23566-1-git-send-email-yangyicong@hisilicon.com > > > /* > > > * Hotplug ports handled natively by the OS were not validated > > > * by vendors for runtime D3 at least until 2018 because there > > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > > > index 6e0d1528d471..66fd5c1bf71b 100644 > > > --- a/drivers/pci/pci.h > > > +++ b/drivers/pci/pci.h > > > @@ -39,6 +39,8 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > > /** > > > * struct pci_platform_pm_ops - Firmware PM callbacks > > > * > > > + * @bridge_d3: Does the bridge allow entering into D3 > > > + * > > > * @is_manageable: returns 'true' if given device is power manageable by the > > > * platform firmware > > > * > > > @@ -60,6 +62,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > > * these callbacks are mandatory. > > > */ > > > struct pci_platform_pm_ops { > > > + bool (*bridge_d3)(struct pci_dev *dev); > > > bool (*is_manageable)(struct pci_dev *dev); > > > int (*set_state)(struct pci_dev *dev, pci_power_t state); > > > pci_power_t (*get_state)(struct pci_dev *dev); > > > -- > > > > > > diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c > > index aafd58da3a89..0bacd45b30d6 100644 > > --- a/drivers/pci/pci-mid.c > > +++ b/drivers/pci/pci-mid.c > > @@ -16,6 +16,11 @@ > > > > #include "pci.h" > > > > +static bool mid_pci_bridge_d3(struct pci_dev *dev) > > +{ > > + return false; > > +} > > + > > static bool mid_pci_power_manageable(struct pci_dev *dev) > > { > > return true; > > @@ -47,6 +52,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) > > } > > > > static const struct pci_platform_pm_ops mid_pci_platform_pm = { > > + .bridge_d3 = mid_pci_bridge_d3, > > .is_manageable = mid_pci_power_manageable, > > .set_state = mid_pci_set_power_state, > > .get_state = mid_pci_get_power_state, > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 595fcf59843f..fa837e88ea07 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -820,8 +820,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; > > > > int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) > > { > > - if (!ops->is_manageable || !ops->set_state || !ops->get_state || > > - !ops->choose_state || !ops->set_wakeup || !ops->need_resume) > > + if (!ops->bridge_d3 || !ops->is_manageable || !ops->set_state || > > + !ops->get_state || !ops->choose_state || !ops->set_wakeup || > > + !ops->need_resume) > > return -EINVAL; > > pci_platform_pm = ops; > > return 0;
On Wed, Apr 08, 2020 at 03:12:08PM -0500, Bjorn Helgaas wrote: > On Wed, Apr 08, 2020 at 09:04:09AM +0300, Mika Westerberg wrote: > > On Tue, Apr 07, 2020 at 06:54:23PM -0500, Bjorn Helgaas wrote: > > > On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote: > > > > In order to have better power management for Thunderbolt PCIe chains, > > > > Windows enables power management for native PCIe hotplug ports if there > > > > is following ACPI _DSD attached to the root port: > > > > > > > > Name (_DSD, Package () { > > > > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), > > > > Package () { > > > > Package () {"HotPlugSupportInD3", 1} > > > > } > > > > }) > > > > > > > > This is also documented in: > > > > > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 > > > > > > This doc basically says that if the platform supplies this _DSD, the > > > root port is "capable of handling hot plug events while in D3 state". > > > > > > What does that mean? That statement is not really actionable. I > > > *assume* it's telling us about some specific hardware or firmware > > > functionality, like maybe we'll get a notification for hotplug events > > > when the device is in D3? D3hot? D3cold? What is the notification? > > > Is it immediate or when the device comes back to D0? How do we > > > control and field the notification? > > > > I think it simply gives the OS a hint that it can put PCIe hotplug > > capable port into D3 and expect it to wake up when device is detected. > > I'd really like more specific details than this. PCI power management > is explicitly controlled by software, so I don't know what it means > for a bridge to "wake up when device is detected." Note these are for PCIe which is not the same as the paraller PCI. What I mean here is that there is some sort of wake depending whether the link is in L1 or L2/L3 and then resulting the link to go to L0 and PME message being send over to the root complex. > Normally Linux would get some kind of notification like a PME, then > execute an ACPI method and/or write PCI_PM_CTRL to put the device back > in D0. Right. > Are we talking about D3hot or D3cold? My interpretation is that both (D3 implies both D3hot and D3cold) but I did not write that spec. Systems where this is used typically go down to D3cold with the PCIe topology (links are in L2). > The PCI PM capability already has a way to advertise that it can > generate PME from D3cold. How is this different from that? Well you always need some platform (ACPI) help in order to even to D3cold. This applies to waking up as well. The PCIe device may advertise that it supports this but I don't think it can be sure that the system it is connected to has this plumbing. For PCIe hotplug ports there have been issues that have prevented doing power management for those. The _DSD is there to provide a hint to the OS saying that yeah, this port actually is expected to work even if it goes into D3 (cold/hot). > Is this _DSD something that *could* be advertised via PCI config > space, i.e., is it completely determined by the Root Port? Or is it > something that requires ACPI support, so it cannot be done directly by > the hardware device? You always need help from platform (ACPI) to get into D3cold. > These are all things we need to know in order to make power management > reliable. > > > > > Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) > > > > and then implement it for ACPI based systems so that the above property is > > > > checked. > > > > > > > > There is one catch, though. The initial pci_dev->bridge_d3 is set before > > > > the root port has ACPI companion bound (the device is not added to the > > > > PCI bus either) so we need to look up the ACPI companion manually in > > > > that case in acpi_pci_bridge_d3(). > > > > > > > > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > > > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > --- > > > > drivers/acpi/property.c | 3 +++ > > > > drivers/pci/pci-acpi.c | 41 +++++++++++++++++++++++++++++++++++++++++ > > > > drivers/pci/pci.c | 9 +++++++++ > > > > drivers/pci/pci.h | 3 +++ > > > > 4 files changed, 56 insertions(+) > > > > > > > > diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c > > > > index 90ba9371bae6..8c7c4583b52d 100644 > > > > --- a/drivers/acpi/property.c > > > > +++ b/drivers/acpi/property.c > > > > @@ -28,6 +28,9 @@ static const guid_t prp_guids[] = { > > > > /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ > > > > GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, > > > > 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), > > > > + /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ > > > > + GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, > > > > + 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), > > > > }; > > > > > > > > static const guid_t ads_guid = > > > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c > > > > index f8436d1c4d45..c8d0549580f4 100644 > > > > --- a/drivers/pci/pci-acpi.c > > > > +++ b/drivers/pci/pci-acpi.c > > > > @@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) > > > > return PCI_POWER_ERROR; > > > > } > > > > > > > > +static struct acpi_device *acpi_pci_find_companion(struct device *dev); > > > > + > > > > +static bool acpi_pci_bridge_d3(struct pci_dev *dev) > > > > +{ > > > > + const struct fwnode_handle *fwnode; > > > > + struct acpi_device *adev; > > > > + struct pci_dev *root; > > > > + u8 val; > > > > + > > > > + if (!dev->is_hotplug_bridge) > > > > + return false; > > > > + > > > > + /* > > > > + * Look for a special _DSD property for the root port and if it > > > > + * is set we know the hierarchy behind it supports D3 just fine. > > > > + */ > > > > + root = pci_find_pcie_root_port(dev); > > > > + if (!root) > > > > + return false; > > > > + > > > > + adev = ACPI_COMPANION(&root->dev); > > > > + if (root == dev) { > > > > + /* > > > > + * It is possible that the ACPI companion is not yet bound > > > > + * for the root port so look it up manually here. > > > > + */ > > > > + if (!adev && !pci_dev_is_added(root)) > > > > + adev = acpi_pci_find_companion(&root->dev); > > > > + } > > > > + > > > > + if (!adev) > > > > + return false; > > > > + > > > > + fwnode = acpi_fwnode_handle(adev); > > > > + if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val)) > > > > + return false; > > > > + > > > > + return val == 1; > > > > +} > > > > + > > > > static bool acpi_pci_power_manageable(struct pci_dev *dev) > > > > { > > > > struct acpi_device *adev = ACPI_COMPANION(&dev->dev); > > > > @@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) > > > > } > > > > > > > > static const struct pci_platform_pm_ops acpi_pci_platform_pm = { > > > > + .bridge_d3 = acpi_pci_bridge_d3, > > > > .is_manageable = acpi_pci_power_manageable, > > > > .set_state = acpi_pci_set_power_state, > > > > .get_state = acpi_pci_get_power_state, > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > > index 1af6f1887986..b1b3052f15dc 100644 > > > > --- a/drivers/pci/pci.c > > > > +++ b/drivers/pci/pci.c > > > > @@ -791,6 +791,11 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) > > > > return pci_platform_pm ? pci_platform_pm->need_resume(dev) : false; > > > > } > > > > > > > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) > > > > +{ > > > > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; > > > > > > This patch added a .bridge_d3() implementation for ACPI but not for > > > MID. What prevents us from calling platform_pci_bridge_d3() on a MID > > > platform and trying to call through a NULL pointer? > > > > > > Shouldn't we do something like the patch attached below? > > > > IIRC MID devices in general don't have PCIe ports (so we never enable PM > > for them). Is this a real problem that crashes peoples kernels on MID > > systems? Then yes I think the patch makes sense to have. > > > > I also remember testing some other stuff on one MID system (Edison) > > quite recently and did not see any issues. > > I have not seen reports of crashes, but I do think this is a real > problem. The problem is that the code as-is relies on assumptions > ("MID does not have PCI and never will") that are implicit and > impossible to verify, which is a maintenance problem. Well, there won't be any new MID devices and the only one we support partially is Edison and it does not have a single PCIe port that could even be power managed. > > > > +} > > > > + > > > > /** > > > > * pci_raw_set_power_state - Use PCI PM registers to set the power state of > > > > * given PCI device > > > > @@ -2514,6 +2519,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > > > > if (bridge->is_thunderbolt) > > > > return true; > > > > > > > > + /* Platform might know better if the bridge supports D3 */ > > > > + if (platform_pci_bridge_d3(bridge)) > > > > + return true; > > > > > > *All* devices trivially support D3. Obviously we're trying to learn > > > something else here. What is it? > > > > D3 has been problematic with hotplug bridges which is the reason we have > > not put them in D3 until recently (and still don't do that for ACPI > > hotplug bridges). > > > > BTW, this patch was merged over a year ago so I'm not sure why you comment > > it now. Or you want me to add incremental changes to it? > > I was reviewing [1], which updates pci_find_pcie_root_port(), which is > used by acpi_pci_bridge_d3(). I noticed a potential NULL pointer > dereference, which was a distraction. > > Unless you object, I'll merge something like the patch below to > prevent that distraction for others. No objections :) However, in order to make this more maintainable, what if we check in the platform_pci_bridge_d3() itself whether the pointer is NULL and return false? That would work for any future platforms and avoid adding the dummy implementation each time. > [1] https://lore.kernel.org/r/1586262717-23566-1-git-send-email-yangyicong@hisilicon.com > > > > > /* > > > > * Hotplug ports handled natively by the OS were not validated > > > > * by vendors for runtime D3 at least until 2018 because there > > > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > > > > index 6e0d1528d471..66fd5c1bf71b 100644 > > > > --- a/drivers/pci/pci.h > > > > +++ b/drivers/pci/pci.h > > > > @@ -39,6 +39,8 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > > > /** > > > > * struct pci_platform_pm_ops - Firmware PM callbacks > > > > * > > > > + * @bridge_d3: Does the bridge allow entering into D3 > > > > + * > > > > * @is_manageable: returns 'true' if given device is power manageable by the > > > > * platform firmware > > > > * > > > > @@ -60,6 +62,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); > > > > * these callbacks are mandatory. > > > > */ > > > > struct pci_platform_pm_ops { > > > > + bool (*bridge_d3)(struct pci_dev *dev); > > > > bool (*is_manageable)(struct pci_dev *dev); > > > > int (*set_state)(struct pci_dev *dev, pci_power_t state); > > > > pci_power_t (*get_state)(struct pci_dev *dev); > > > > -- > > > > > > > > > diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c > > > index aafd58da3a89..0bacd45b30d6 100644 > > > --- a/drivers/pci/pci-mid.c > > > +++ b/drivers/pci/pci-mid.c > > > @@ -16,6 +16,11 @@ > > > > > > #include "pci.h" > > > > > > +static bool mid_pci_bridge_d3(struct pci_dev *dev) > > > +{ > > > + return false; > > > +} > > > + > > > static bool mid_pci_power_manageable(struct pci_dev *dev) > > > { > > > return true; > > > @@ -47,6 +52,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) > > > } > > > > > > static const struct pci_platform_pm_ops mid_pci_platform_pm = { > > > + .bridge_d3 = mid_pci_bridge_d3, > > > .is_manageable = mid_pci_power_manageable, > > > .set_state = mid_pci_set_power_state, > > > .get_state = mid_pci_get_power_state, > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index 595fcf59843f..fa837e88ea07 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -820,8 +820,9 @@ static const struct pci_platform_pm_ops *pci_platform_pm; > > > > > > int pci_set_platform_pm(const struct pci_platform_pm_ops *ops) > > > { > > > - if (!ops->is_manageable || !ops->set_state || !ops->get_state || > > > - !ops->choose_state || !ops->set_wakeup || !ops->need_resume) > > > + if (!ops->bridge_d3 || !ops->is_manageable || !ops->set_state || > > > + !ops->get_state || !ops->choose_state || !ops->set_wakeup || > > > + !ops->need_resume) > > > return -EINVAL; > > > pci_platform_pm = ops; > > > return 0;
[breadcrumbs for the archives: this thread is about
26ad34d510a8 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports"),
https://git.kernel.org/linus/26ad34d510a8]
On Thu, Apr 09, 2020 at 09:54:11AM +0300, Mika Westerberg wrote:
> On Wed, Apr 08, 2020 at 03:12:08PM -0500, Bjorn Helgaas wrote:
> > On Wed, Apr 08, 2020 at 09:04:09AM +0300, Mika Westerberg wrote:
> > > On Tue, Apr 07, 2020 at 06:54:23PM -0500, Bjorn Helgaas wrote:
> > > > On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote:
> > > > > In order to have better power management for Thunderbolt PCIe chains,
> > > > > Windows enables power management for native PCIe hotplug ports if there
> > > > > is following ACPI _DSD attached to the root port:
> > > > >
> > > > > Name (_DSD, Package () {
> > > > > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
> > > > > Package () {
> > > > > Package () {"HotPlugSupportInD3", 1}
> > > > > }
> > > > > })
> > > > >
> > > > > This is also documented in:
> > > > >
> > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3
> > > >
> > > > This doc basically says that if the platform supplies this _DSD, the
> > > > root port is "capable of handling hot plug events while in D3 state".
> > > >
> > > > What does that mean? That statement is not really actionable. I
> > > > *assume* it's telling us about some specific hardware or firmware
> > > > functionality, like maybe we'll get a notification for hotplug events
> > > > when the device is in D3? D3hot? D3cold? What is the notification?
> > > > Is it immediate or when the device comes back to D0? How do we
> > > > control and field the notification?
> > >
> > > I think it simply gives the OS a hint that it can put PCIe hotplug
> > > capable port into D3 and expect it to wake up when device is detected.
> >
> > I'd really like more specific details than this. PCI power management
> > is explicitly controlled by software, so I don't know what it means
> > for a bridge to "wake up when device is detected."
>
> Note these are for PCIe which is not the same as the parallel PCI.
Sure, but the PCI power management framework doesn't need to know
about PCI/PCIe differences.
> What I mean here is that there is some sort of wake depending whether
> the link is in L1 or L2/L3 and then resulting the link to go to L0 and
> PME message being send over to the root complex.
This is compatible with conventional PCI behavior. PME_Support in the
PM Capability tells us whether the device can generate a PME from D0,
D1, D2, D3hot, or D3cold. AFAIK, this applies to both conventional
PCI and PCIe, so I think this _DSD must be telling us something more
than just "this PCIe device can assert PME from D3hot and D3cold."
PME_Support tells us whether the device can generate PMEs from D3cold,
but of course it doesn't say anything about whether hotplug events
cause those PMEs.
PCIe r5.0, sec 6.7.3.4, says ports must support PMEs for hotplug
events while the device is in D1, D2, or D3hot. It clearly leaves out
D3cold.
So maybe this _DSD tells us that this device can generate *hotplug*
event PMEs from D3cold?
> > Normally Linux would get some kind of notification like a PME, then
> > execute an ACPI method and/or write PCI_PM_CTRL to put the device back
> > in D0.
>
> Right.
>
> > Are we talking about D3hot or D3cold?
>
> My interpretation is that both (D3 implies both D3hot and D3cold) but I
> did not write that spec.
>
> Systems where this is used typically go down to D3cold with the PCIe
> topology (links are in L2).
>
> > The PCI PM capability already has a way to advertise that it can
> > generate PME from D3cold. How is this different from that?
>
> Well you always need some platform (ACPI) help in order to even to
> D3cold. This applies to waking up as well. The PCIe device may advertise
> that it supports this but I don't think it can be sure that the system
> it is connected to has this plumbing.
Yes, transitions to/from D3cold require platform support. But those
transitions are done by ACPI methods, so any plumbing is ACPI's
problem, and I don't think this _DSD helps the OS with that.
> For PCIe hotplug ports there have been issues that have prevented doing
> power management for those. The _DSD is there to provide a hint to the
> OS saying that yeah, this port actually is expected to work even if it
> goes into D3 (cold/hot).
That doesn't really help fix bugs in this area or help with future
refactoring, because it's not specific about what the issues were or
what the _DSD means.
I think the combination of PCIe r5.0 7.5.2.1 (PME_Support from D0, D1,
D2, D3hot, D3cold) and 6.7.3.4 (hotplug PME events from D1, D2,
D3hot) covers everything except hotplug PME events from D3cold.
So my guess is that this _DSD is a way to tell the OS that this device
generates PMEs for hotplug events even when the device is in D3cold.
Does that make any sense?
> > Is this _DSD something that *could* be advertised via PCI config
> > space, i.e., is it completely determined by the Root Port? Or is it
> > something that requires ACPI support, so it cannot be done directly by
> > the hardware device?
>
> You always need help from platform (ACPI) to get into D3cold.
>
> > These are all things we need to know in order to make power management
> > reliable.
> > > > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
> > > > > +{
> > > > > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false;
> > > >
> > > > This patch added a .bridge_d3() implementation for ACPI but
> > > > not for MID. What prevents us from calling
> > > > platform_pci_bridge_d3() on a MID platform and trying to call
> > > > through a NULL pointer?
> > > >
> > > > Shouldn't we do something like the patch attached below?
> > >
> > > IIRC MID devices in general don't have PCIe ports (so we never
> > > enable PM for them). Is this a real problem that crashes peoples
> > > kernels on MID systems? Then yes I think the patch makes sense
> > > to have.
> > >
> > > I also remember testing some other stuff on one MID system
> > > (Edison) quite recently and did not see any issues.
> >
> > I have not seen reports of crashes, but I do think this is a real
> > problem. The problem is that the code as-is relies on assumptions
> > ("MID does not have PCI and never will") that are implicit and
> > impossible to verify, which is a maintenance problem.
>
> Well, there won't be any new MID devices and the only one we support
> partially is Edison and it does not have a single PCIe port that
> could even be power managed.
The problem I'm trying to solve is making this code understandable.
It doesn't help to assert that "there are no devices that exercise
this path" because one cannot figure that out by looking at the code.
> > > BTW, this patch was merged over a year ago so I'm not sure why you comment
> > > it now. Or you want me to add incremental changes to it?
> >
> > I was reviewing [1], which updates pci_find_pcie_root_port(), which is
> > used by acpi_pci_bridge_d3(). I noticed a potential NULL pointer
> > dereference, which was a distraction.
> >
> > Unless you object, I'll merge something like the patch below to
> > prevent that distraction for others.
>
> No objections :)
>
> However, in order to make this more maintainable, what if we check in
> the platform_pci_bridge_d3() itself whether the pointer is NULL and
> return false? That would work for any future platforms and avoid adding
> the dummy implementation each time.
That's a much better idea, thank you! I'll cc you when I revise the
patch.
Bjorn
On Fri, Apr 10, 2020 at 05:30:58PM -0500, Bjorn Helgaas wrote: > [breadcrumbs for the archives: this thread is about > 26ad34d510a8 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports"), > https://git.kernel.org/linus/26ad34d510a8] > > On Thu, Apr 09, 2020 at 09:54:11AM +0300, Mika Westerberg wrote: > > On Wed, Apr 08, 2020 at 03:12:08PM -0500, Bjorn Helgaas wrote: > > > On Wed, Apr 08, 2020 at 09:04:09AM +0300, Mika Westerberg wrote: > > > > On Tue, Apr 07, 2020 at 06:54:23PM -0500, Bjorn Helgaas wrote: > > > > > On Thu, Sep 13, 2018 at 05:33:22PM +0300, Mika Westerberg wrote: > > > > > > In order to have better power management for Thunderbolt PCIe chains, > > > > > > Windows enables power management for native PCIe hotplug ports if there > > > > > > is following ACPI _DSD attached to the root port: > > > > > > > > > > > > Name (_DSD, Package () { > > > > > > ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), > > > > > > Package () { > > > > > > Package () {"HotPlugSupportInD3", 1} > > > > > > } > > > > > > }) > > > > > > > > > > > > This is also documented in: > > > > > > > > > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 > > > > > > > > > > This doc basically says that if the platform supplies this _DSD, the > > > > > root port is "capable of handling hot plug events while in D3 state". > > > > > > > > > > What does that mean? That statement is not really actionable. I > > > > > *assume* it's telling us about some specific hardware or firmware > > > > > functionality, like maybe we'll get a notification for hotplug events > > > > > when the device is in D3? D3hot? D3cold? What is the notification? > > > > > Is it immediate or when the device comes back to D0? How do we > > > > > control and field the notification? > > > > > > > > I think it simply gives the OS a hint that it can put PCIe hotplug > > > > capable port into D3 and expect it to wake up when device is detected. > > > > > > I'd really like more specific details than this. PCI power management > > > is explicitly controlled by software, so I don't know what it means > > > for a bridge to "wake up when device is detected." > > > > Note these are for PCIe which is not the same as the parallel PCI. > > Sure, but the PCI power management framework doesn't need to know > about PCI/PCIe differences. Well it needs to deal with certain differences anyway like the required delays etc. > > What I mean here is that there is some sort of wake depending whether > > the link is in L1 or L2/L3 and then resulting the link to go to L0 and > > PME message being send over to the root complex. > > This is compatible with conventional PCI behavior. PME_Support in the > PM Capability tells us whether the device can generate a PME from D0, > D1, D2, D3hot, or D3cold. AFAIK, this applies to both conventional > PCI and PCIe, so I think this _DSD must be telling us something more > than just "this PCIe device can assert PME from D3hot and D3cold." > > PME_Support tells us whether the device can generate PMEs from D3cold, > but of course it doesn't say anything about whether hotplug events > cause those PMEs. > > PCIe r5.0, sec 6.7.3.4, says ports must support PMEs for hotplug > events while the device is in D1, D2, or D3hot. It clearly leaves out > D3cold. > > So maybe this _DSD tells us that this device can generate *hotplug* > event PMEs from D3cold? Yes, that sounds reasonable. > > > Normally Linux would get some kind of notification like a PME, then > > > execute an ACPI method and/or write PCI_PM_CTRL to put the device back > > > in D0. > > > > Right. > > > > > Are we talking about D3hot or D3cold? > > > > My interpretation is that both (D3 implies both D3hot and D3cold) but I > > did not write that spec. > > > > Systems where this is used typically go down to D3cold with the PCIe > > topology (links are in L2). > > > > > The PCI PM capability already has a way to advertise that it can > > > generate PME from D3cold. How is this different from that? > > > > Well you always need some platform (ACPI) help in order to even to > > D3cold. This applies to waking up as well. The PCIe device may advertise > > that it supports this but I don't think it can be sure that the system > > it is connected to has this plumbing. > > Yes, transitions to/from D3cold require platform support. But those > transitions are done by ACPI methods, so any plumbing is ACPI's > problem, and I don't think this _DSD helps the OS with that. > > > For PCIe hotplug ports there have been issues that have prevented doing > > power management for those. The _DSD is there to provide a hint to the > > OS saying that yeah, this port actually is expected to work even if it > > goes into D3 (cold/hot). > > That doesn't really help fix bugs in this area or help with future > refactoring, because it's not specific about what the issues were or > what the _DSD means. > > > I think the combination of PCIe r5.0 7.5.2.1 (PME_Support from D0, D1, > D2, D3hot, D3cold) and 6.7.3.4 (hotplug PME events from D1, D2, > D3hot) covers everything except hotplug PME events from D3cold. > > So my guess is that this _DSD is a way to tell the OS that this device > generates PMEs for hotplug events even when the device is in D3cold. > Does that make any sense? Yes it does. > > > Is this _DSD something that *could* be advertised via PCI config > > > space, i.e., is it completely determined by the Root Port? Or is it > > > something that requires ACPI support, so it cannot be done directly by > > > the hardware device? > > > > You always need help from platform (ACPI) to get into D3cold. > > > > > These are all things we need to know in order to make power management > > > reliable. > > > > > > > +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) > > > > > > +{ > > > > > > + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; > > > > > > > > > > This patch added a .bridge_d3() implementation for ACPI but > > > > > not for MID. What prevents us from calling > > > > > platform_pci_bridge_d3() on a MID platform and trying to call > > > > > through a NULL pointer? > > > > > > > > > > Shouldn't we do something like the patch attached below? > > > > > > > > IIRC MID devices in general don't have PCIe ports (so we never > > > > enable PM for them). Is this a real problem that crashes peoples > > > > kernels on MID systems? Then yes I think the patch makes sense > > > > to have. > > > > > > > > I also remember testing some other stuff on one MID system > > > > (Edison) quite recently and did not see any issues. > > > > > > I have not seen reports of crashes, but I do think this is a real > > > problem. The problem is that the code as-is relies on assumptions > > > ("MID does not have PCI and never will") that are implicit and > > > impossible to verify, which is a maintenance problem. > > > > Well, there won't be any new MID devices and the only one we support > > partially is Edison and it does not have a single PCIe port that > > could even be power managed. > > The problem I'm trying to solve is making this code understandable. > It doesn't help to assert that "there are no devices that exercise > this path" because one cannot figure that out by looking at the code. Fair enough. > > > > BTW, this patch was merged over a year ago so I'm not sure why you comment > > > > it now. Or you want me to add incremental changes to it? > > > > > > I was reviewing [1], which updates pci_find_pcie_root_port(), which is > > > used by acpi_pci_bridge_d3(). I noticed a potential NULL pointer > > > dereference, which was a distraction. > > > > > > Unless you object, I'll merge something like the patch below to > > > prevent that distraction for others. > > > > No objections :) > > > > However, in order to make this more maintainable, what if we check in > > the platform_pci_bridge_d3() itself whether the pointer is NULL and > > return false? That would work for any future platforms and avoid adding > > the dummy implementation each time. > > That's a much better idea, thank you! I'll cc you when I revise the > patch. OK, thanks!
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c index 90ba9371bae6..8c7c4583b52d 100644 --- a/drivers/acpi/property.c +++ b/drivers/acpi/property.c @@ -28,6 +28,9 @@ static const guid_t prp_guids[] = { /* ACPI _DSD device properties GUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */ GUID_INIT(0xdaffd814, 0x6eba, 0x4d8c, 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01), + /* Hotplug in D3 GUID: 6211e2c0-58a3-4af3-90e1-927a4e0c55a4 */ + GUID_INIT(0x6211e2c0, 0x58a3, 0x4af3, + 0x90, 0xe1, 0x92, 0x7a, 0x4e, 0x0c, 0x55, 0xa4), }; static const guid_t ads_guid = diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index f8436d1c4d45..c8d0549580f4 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -519,6 +519,46 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) return PCI_POWER_ERROR; } +static struct acpi_device *acpi_pci_find_companion(struct device *dev); + +static bool acpi_pci_bridge_d3(struct pci_dev *dev) +{ + const struct fwnode_handle *fwnode; + struct acpi_device *adev; + struct pci_dev *root; + u8 val; + + if (!dev->is_hotplug_bridge) + return false; + + /* + * Look for a special _DSD property for the root port and if it + * is set we know the hierarchy behind it supports D3 just fine. + */ + root = pci_find_pcie_root_port(dev); + if (!root) + return false; + + adev = ACPI_COMPANION(&root->dev); + if (root == dev) { + /* + * It is possible that the ACPI companion is not yet bound + * for the root port so look it up manually here. + */ + if (!adev && !pci_dev_is_added(root)) + adev = acpi_pci_find_companion(&root->dev); + } + + if (!adev) + return false; + + fwnode = acpi_fwnode_handle(adev); + if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val)) + return false; + + return val == 1; +} + static bool acpi_pci_power_manageable(struct pci_dev *dev) { struct acpi_device *adev = ACPI_COMPANION(&dev->dev); @@ -635,6 +675,7 @@ static bool acpi_pci_need_resume(struct pci_dev *dev) } static const struct pci_platform_pm_ops acpi_pci_platform_pm = { + .bridge_d3 = acpi_pci_bridge_d3, .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .get_state = acpi_pci_get_power_state, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1af6f1887986..b1b3052f15dc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -791,6 +791,11 @@ static inline bool platform_pci_need_resume(struct pci_dev *dev) return pci_platform_pm ? pci_platform_pm->need_resume(dev) : false; } +static inline bool platform_pci_bridge_d3(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->bridge_d3(dev) : false; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -2514,6 +2519,10 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) if (bridge->is_thunderbolt) return true; + /* Platform might know better if the bridge supports D3 */ + if (platform_pci_bridge_d3(bridge)) + return true; + /* * Hotplug ports handled natively by the OS were not validated * by vendors for runtime D3 at least until 2018 because there diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6e0d1528d471..66fd5c1bf71b 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -39,6 +39,8 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); /** * struct pci_platform_pm_ops - Firmware PM callbacks * + * @bridge_d3: Does the bridge allow entering into D3 + * * @is_manageable: returns 'true' if given device is power manageable by the * platform firmware * @@ -60,6 +62,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); * these callbacks are mandatory. */ struct pci_platform_pm_ops { + bool (*bridge_d3)(struct pci_dev *dev); bool (*is_manageable)(struct pci_dev *dev); int (*set_state)(struct pci_dev *dev, pci_power_t state); pci_power_t (*get_state)(struct pci_dev *dev);
In order to have better power management for Thunderbolt PCIe chains, Windows enables power management for native PCIe hotplug ports if there is following ACPI _DSD attached to the root port: Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} } }) This is also documented in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) and then implement it for ACPI based systems so that the above property is checked. There is one catch, though. The initial pci_dev->bridge_d3 is set before the root port has ACPI companion bound (the device is not added to the PCI bus either) so we need to look up the ACPI companion manually in that case in acpi_pci_bridge_d3(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> --- drivers/acpi/property.c | 3 +++ drivers/pci/pci-acpi.c | 41 +++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 9 +++++++++ drivers/pci/pci.h | 3 +++ 4 files changed, 56 insertions(+)